GE/H/T-33/2026-27 REPAIR / REPLACEMENT OF FITTING FIXTURES OF HOSP BLDG, ADC AND CTVS CENTRE AT AHRR UNDER GE E/M RR HOSP DELHI CANTT-10

S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 120 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed

S & F in replacement of surface / wall mounted LED batten 20 W, luminaire made up of Extruded Aluminium Housing with PC diffuser, IP40. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 5000K, ≥ 120 lumen/watt, PF ≥0.95. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed

S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 5700- 6500K, ≥ 120 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.

S & F in replacement ceiling recessed mounting LED luminaire, 600 mm x 600 mm, (2' x2') 35/36 watt, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting in office areas. The LEDs used should have a colour consistency SDCM≤5, CRI ≥ 80 and CCT 5000K, ≥ 110 lumen/watt, PF ≥0.95, Surge Protection 3.5KV. The brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.

S & F in replacement ceiling recessed mounting LED SKY Lights luminaire, Printed Customised design (design as per approval by GE), 600 mm x 600 mm, (2' x2'), 36 Watts, luminaire should be made of single piece deep drawn CRCA housing with fully diffused PC/PS diffuser for general lighting. The LEDs used should have a color consistency SDCM≤5, CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.95, Surge Protection 3.5KV. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make/manufacturer as that of LED luminaires complete all as specified and directed.

S & F in replacement Surface mounted LED Round light fitting 15 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.

S & F in replacement, Flush fitting (recess mounted) LED Round light fitting 15 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.

S & F in replacement Surface mounted LED Round light fitting 18 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.

S & F in replacement, Flush fitting (recess mounted) LED Round light fitting 18 watt, 240V, AC, 50 Hz, has an inbuilt Microwave motion sensor to dim the LED in case of no movement, as long as the motion is detected, the LED flush Light glows at full brightness and it dims in case of no movement with PC diffuser, IP20 from dust. CRI ≥ 80 and CCT 6500K, ≥ 110 lumen / watt, PF ≥0.90, surge protection of min 2.5KV. The luminaire brand name shall be embossed / engraved on the luminaire / accessory / Endplate / Rim / Frame / end caps & not put using sticker / screen printing. The LED Luminaire & it's driver both should be BIS registered & shall be of the same make / manufacturer as that of LED luminaires complete all as specified and directed.

Taking down carefully unserviceable of aluminium point wiring complete except for ceiling or where not feasible fan / plug / bell but including fittings such as switches, ceiling rose, pendants, regulator etc. and making good disturbed surface to match with the existing surface of roof / wall / floor by applying putty and applying colour / white wash finish complete all as specified and directed.