GE/U(N)-63/2020-21 REPAIR /REPLACEMENT OF ROOF SHEETS FLOORING PLASTERING INTERNAL WATER SUPPLY AND CONNECTED B/R WORKS AT RR BN UNDER AGE B/R-I OF GE (NORTH) UDHAMPUR

Amount

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ), rubbish off the premises complete all as specified and as directed by Engr-in-Charge

Anti skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exc 0.11 Sqm but not exc 0.18 Sqm in floor etc, set and jointed and laid with spacers and pointed with liquid epoxy and pointed in colour tile grout including screed bed or bedding layer of mortar 10mm thk for laying floor finishes in CM(1:4) complete all as specified

Coloured glazed ceramic coloured tiles 600 mm x 300 mm x 10mm thick on vertical surfaces of walls as in dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering on fair faces of brick /concrete surfaces in cement mortar 1:4 and fair to recive tiles as in skirting/dado etc complete all specified

Coloured non skid ceramic tiles 10mm thick (square) polished , light shade, area of each tiles exc 0.18 sqm but n.exc 0.38Sq.m in floor/skirting etc, set and jointed in neat cement slurry and pointed with colour liquid epoxy tile grout incl 10mm thick screed bed in CM (1:4) complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quoines arches,pillar etc but excluding ashlar facing , dressed stone work and precast concrete articles complete all as specified and as directed by Engr-in-Charge

Brick work with sub class 'B' bricks, straight or curved on plan, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified.

Providing plain cement concrete 1:2:4, type B-0 using 12.5 mm graded crushed stone aggregates as in cills, steps, seismic and other similar bands, parapets and railings up to 60 cm in height, coping, kneelers, apex stones , bed plates, kerbs not provided for including weathering, slightly rounded or chamfered angles and throating as directed .

In replacement Wash down water closet (Pedestal pattern), complete with Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc.including Seat and cover for pedestal pan . complete Make - CERA cat part No. 2080 (Camelia), Jaquar CNS-WHT-OP01 or equilvent of any approved make as approved by GE.

In replacement PVC low level flushing cistern of capacity 10 ltr. white with inlet, ball valve, float and handle including breckets, flush pipe of polyethylene of low or high density or PVC 32mm dia and connection to pipes. CERA cat part No. 2602 P (Camelia), Jaquar or Hindware or equilvent of any approved make as approved by GE.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed by Engr-in-Charge

Pre-painted coloured profiled Galvalume/ Zincalume sheet 0.50mm thick TCT of grading YS-550, coating class AZ-150, class-3 confirming to IS-15965-2012, pitch profile c/c n.exc 203mm & crest of profile not less than 28.5mm as in roof covering/cladding to wall fixed with self taping screws/fastners with EPDM seals including gap filling between sheet and wall with PCC (1:3:6) as per site requirement complete all as specified and directed by Engineer-in-Charge” Add Make - Durashined ® of Tata Blue Scope/ Colouron ‘+’ of JSW or equilvent makes etc

“------Ditto--------as per Item No. 11 here-in-before but plain ridge profile sheet as in eaves, gutter,ridge etc complete all as specified

Factory made Pressed Steel windows/Ventilators with glazed & gauzed shutters (Combined with side hund shutter incl box tyoe hinges) steel handle and necessary locking arrangment, Peg stay complete with one shop coat of red oxide zinc chrome primer complete all specified and as directed. Notye :Rate quoted are included for wire gauzed & glazed window complete & shall be measured as overall out to out one side only complete all as specified and as directed by Engr-in-Charge

Mild steel framed work such as Iron door , grills, gratings, etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar; barred iron doors; ladders; framed balusters; railing;frame work for water tanks and similar work conforming to Fe 290.Gde-E-165, all as specified .

Preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint. complete all as specified and as directed by Engr-in-Charge

Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplescomplete all as specified and as ddirected ..

4.00 mm thick sheet figured glass, ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane complete all as specified and as directed by Engr-in-Charge

Taking down chowkats or frames (without taking off shutters from frame) not exc 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work (holes cut and any other damage to jambs, walls for taking out holdfasts shall be finished identical to existing finish without any extra cost to Govt.) complete all as specified and as directed by Engr-in-Charge

Taking down cement plaster, any description on brick or stone or cement concrete walls including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Rendering 15 mm thick cement plaster on fair face of brick work or concrete surfaces of wall cement mortar 1:4 etc layer (10+5) secound layer mixed with water proofing compound as per manufacture instruction and finishedand directed . even and smooth without using extra cement complete all as specified Note WPC shall be measured and paid saperatelly under relivent item .

Preparation of new plastered surfaces of wall and applying two coat of cement base paint over one coat of primer , complete all as specified and directed by Engr-in Charge ..

Demolition of plain cement concrete below or above ground level n exc 15 cm thickness and removal of soil to outside MD land complete all as specified and as directed by Engr-in-charge.

75mm thick Plain cement concrete 1:3:6 type D-2 using 40mm graded crushed stone aggregate as in sub base of flooring etc, complete all as specified and as directed by Engr-in-charge.

Demolition Stone slabs and tiles laid dry or dry beded or pointed of any description or thickness in floors, aprons etc complete all as specified and as directed by Engr-in-Charge

Plain cement concrete tiles coloured designer interlocking paver of 60mm thick having glossy finish, colour and pattern as approved by Engr-in-charge strength not less than 350 Kg/Sqcm (tested as per IS 1237-1980) laid over and including 50mm thick dry river sand cushioning and voids filled with dry sand and surface compacted with surface vibrator complete all as per manufacturer instructions, specified and as directed by Engr-in-charge.

Dismantling loose/disintegrated portion of RCC chajjas, bends shelves, beams balconies and similar work at any position or any height and dubbing out with PCC 1:1.5:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished required shape including applying anti corrisove paint on exposed surfaced and provision of necessary support form work and including 10mm thick plastering in CM 1:4 finished fair and even completed all as specifed.

Black granite(of any type)stone slab 16 to 18mm thick machine cut for wall lining on vertical surfaces and jointed with spaces and pointed with epoxy tile grout to match the shade of granite stone including grinding, polishing with rounding edges of stone slabs complete over and including 12mm thick backing coat of CM (1:3), complete all as specified and as directed by Engr-in-Charge. Note : upto Height 5.00m

Ditto all as above item hereinbefore but except granite stone Including 12mm thick backing coat CM 1:3 complete all as specified and as directed by Engr-in-Charge. Note : upto Height 5.00m

Machine cut kota stone slab flooring 18-20mm thick over 15 mm thick cement screed in CM 1:4 base and 15-16mm thick and 80mm wide white marble stone border along to wall laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed by Engr-in-Charge

100mm thick PCC type B-2, (1:2:4) using 40mm graded stone aggregate complete all as specified and as directed by Engr-in-Charge

20 mm thick Wearproof topping as specified (incorporating an approved metallic floor hardner), laid on concrete floors & pavings, & finished even & smooth (except metallic hardner) complete all as specified and as directed by Engr-in-Charge Note : Metallic floor hardner shall be measured separetly under respective item as "Supply only".

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'B' complete all as specified and as directed by Engr-in-Charge

Supply only metallic heardner for flooring complete all as specified and as directed by Engr-in-Charge

KUMAR CONSTRUCTION CO

DURGA CONSTRUCTION CO