Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.7 LAccepted-AOC AT POST SONAJ TAL MALEGAON DIST NASHIK | MALEGAON | NASHIK | MAHARASHTRA | L1 | Accepted-AOC ACCEPTED BEING LOWEST BIDDER | |
| 2 | L2₹39.1 L+₹67,996 (1.77%)Rejected-Finance | L2 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 3 | L3₹39.3 L+₹94,502.40 (2.46%)Rejected-Finance | L3 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 4 | L4₹40.6 L+₹2.2 L (5.70%)Rejected-Finance | L4 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER | |
| 5 | L5₹41.8 L+₹3.4 L (8.88%)Rejected-Finance | L5 | Rejected-Finance REJECTED BEING NOT LOWEST BIDDER |
Tender Value
₹48.0 L
EMD Value
₹95,940
Closing Date
24 Jan 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE KHADKI
Headquarters CWE Khadki, Military Engineer Services, Range Hills Road, Khadki, Pune-411003
REPAIR/MAINT OF MES INSTALLATIONS AND ALLIED WORKS IN AREA OF AGE B/R-I (C) UNDER GE(CENTRAL) KHADKI
2023_MES_634494_1
CWE/KKE/TOKEN-79 OF 2023-24
Open Tender
Civil Works
Item Rate
180 days
KHADKI
AS PER TENDER
6 documents required · 6 mandatory
₹500
Yes
GE CENTRAL KHADKI
₹95,940
Yes
4 Mar 2024
27 Dec 2023
1 Feb 2024
27 Dec 2023
24 Jan 2024
11 Jan 2024
28 Dec 2023 - 3 Jan 2024
Amount
Dismantling of Plain or corrugated/galvalume steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings
Dismantling timber framed work scantlings 40 sq.cm and over in section, in any position.
S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, including providing end crimp at required location as directed by Engineer-in-Charge, at eaves level shape of crimp match to sheet profile complete all as specified and directed. Note: The quoted rate shall include provision of end flashing/crimp and no extra payment with regard to this provision will be made to the contractor.
S& F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, roof covering/cladding to wall, fixed with self tapping screws as specified
S & F rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe-410 W(Gde E-250) quality B
S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction but welded tubes confirming to I.S. 1161-1979 grade St. 240 etc as in purlins complete all as specified and directed.
M & L preperation of new steel surfaces of any desciption over 10 cm in width or girth not other wise descibed and applying two coats of synthetic enamell paint over a coat of red oxide
Dismantling of wall and ceiling boards (fibre,pulp insulation, Ac etc), any thickness including cover fillets complete.
S&F interlocking aluminium alloy anodised snap grid consists of main Tee runners of size 38mm x25mm x1.5mm spaced 1200mm centre to centre and cross Tee of size 25mmx25mmx 1.5mm, 1200mm long spaced between the main Tee at 600mm centre to centre to form a grid of 1200mmx600mm and provide a secondary cross tee 25mm x1.4mm ( of length 600mm) to be interlocked of the centre of 1200mmx600mm panel to form a grid of 605mmx605mm and wall angle 25mmx25mmx 2mm. Aluminium alloy extruded section shall be aluminium anodised (minimum 15 micron ) and shall conform to IS 733, IS 1285 and IS 737. including Hangers of GI wire 6mm dia to be fixed by approved rawl plug, level and justers and screws etc.
M&L for 8-9 mm thick Gypsum board/tiles for insulation and accoustic purposes, 60cmx60cm in size , fixed with nails to any frame work or with staples on snap grid in ceiling.
Demolition of stone slabs/flooring of any description laid bedded and pointed any mortar and all as directed.
M&L for Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match including 15 mm thick screed bed in cement mortar (1:6) complete.
All as per Item No 12 above but on step riser skirting over and including 10mm thick rendering in CM (1:4) complete.
Taking down Chowkats or frames with shutters without taking of shutters from the frames exc 1.5 Sqm but not exc 4 Sqm each including all as specified and directed
Taking down Chowkats or frames with shutters without taking of shutters from the frames not.exc 1.5 Sqm each all as specified and directed
Taking down shutter exc. 1.00 Sqm but n.exc. 2.00 Sqm each and removing from site complete all as directed by Engineer-in-Charge.
S&F for powder coated aluminium sliding windows having three Nos of tracks including one wire glazed shutters for mosquito proofing including stainless steel wire cloth of 0.63 mm nominal dia and average aperature 1.4 mm and two Nos glass shutters including 4mm thick coloured glass and aluminium section weight n.less than 0.55 Kg/RM including necessary cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, suitable handles, locking arrangement and fixed to stone masonry wall complete.
S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown on Page No. 160 of SSR 2010 part II.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing
S&F factory made shutter 35mm thick, Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated
S & F 35mm thick 2nd class HW glazed or skeleton shutter open rebated divided into square with plainchamfered or rounded mitred and rebated without sash bar and prepared to receive gauze or glaze, size of members as clause 8.20 (a) of SSR pt-1
S&F 30mm thick, Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S&F for Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
M&L for two coats of synthetic enamel paint over a coat of pink primer on new wooden surfaces including all necessary preparation over 10 cms width or girth.
S&F 100 mm but hinges, medium weight,stainless steel.
S&F for aluminium handles 150 mm cast type anodised
S&F for aluminium anodised barrel tower bolt 200mm long of
S&F for stainless steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed 300mm long
S&F flat iron 25x3mm thick conforming to Fe-290, Gde E-165 in holdfasts.
Dismantling of floor hearth or wall tiling including cm bedding (but not backing) removing serviceable tiles in store rubbish of the premises complete
M & L for Non skid ceramic coloured tiles 7-8mm thick(square/rectangular) area of each tile exceeding 0.06 sqm but n.exc . 0.18 sqm as in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed in CM (1:6) complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface 450 X300 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10 mm thick cement plaster (1:4) as backing coat complete
M&L for 25 mm thick Cement concrete in level course for receiving floor tiles using Type B1,1:2:4 (20 mm graded aggregate) complete.
Demolition of cement concrete unreinforced in ground floors and pavings n.exc. 15cm thickness below or above ground level all as specified.
M&L 40mm thick PCC type B1 (1:2:4) 20 mm graded stone agg in floor finished fair, even and smooth without using extra cement.
M & L 75mm thick PCC type C2 1:3:6( using 40mm graded aggregate) as in plinth protection
Demolition of precast concrete block /brick work walling built in cement mortar
M&L for Precast cement concrete block masonry using type C1 1:3:6 (20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in mortar1:6 complete
All as per Sl Item No. 38 above but except blocks.
Taking down cement plaster on wall /concrete surface etc including racking out joints hacking for key scrubing down with water etc all as specified and directed
M&L for rendering 15 mm thick on faces of brick/ PCC block masonry wall using cement plaster 1:4 and rendering is to be finished even and smooth (without using extra cement) complete
M & L preparation of newly plastered surface and applying two coat of cement base paint on wall etc complete all as specified and directed
M & L for rendering 15mm thick on fair faces brick work /PCC block masonary or concrete surface of wall using cement plaster 1:6 and finished even and smooth (without using extra cement) complete
M & L preparation of newly plastered surface and applying two coat of oil bound Distember over a coat of primer on wall etc complete all as specified and directed
M & L for complete removal of existing treatment and preparation of old plasterd surfaces of wall and applying two coats waterproofing exterior emulsion paint over base coat as per manufacturer direction, and as specified and directed by Engr-in-Charge. (Make ;- Apex Ultima Protek Asianpaints or equivalant) Note;- (i) filling of cracks,holes and dents are includes in the same rates (ii) the emulsion paint include 10 years durability warranty and 6 years waterproofing warranty.
Preparing old plastered or unplastered wall surfaces of any description including brooming down or scrap down with steel wire brushes, smoke soot, moulds, moss efflorescent salts, trading oil, greasy spot and applying one coat of white wash on walls complete all as specified and as directed.
Preparation of old painted steel surfaces of any description exceeding 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Demolition/ Dismantling of precast interlocking tiles/ paver blocks, chequered tiles of any description thickness & size complete all as specified
M&L for 50 mm thick sand filling under floors or foundations including watering and consolidation complete all as specified and directed.
M&L for 75 mm thick PCC 1:4:8 type D2 in sub base complete all as specified and directed
M&L for providing 60 mm thick machine pressed precast concrete interlocking paver blocks of any shape and size conforming to IS-15658-2006,with grey cement and pigment,rubber moulded tiles M-35 Grade,as in floors,paving,path etc. complete laid over 15 mm thick cement mortar (1:6) screed bed layer complete all as specified and as directed.
M&L Chequered cement concrete tiles rubber moulded 30cm x 30cm x 25mm thick set, jointed and pointed in near cement slurry in floors, with grey cement and pigments over and including 15 mm thick screed bedding in CM 1:6
M&L for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate in coping for interlocking tiles drains/block for hold fasts incl use of form work complete.
S & F in repairs Soap dish brass CP fixed complete.
S&F in repairs 15mm dia bore chromium plated bib taps long body with capstan head handle with cup , screwed down, screwed for iron pipe or brass ferrule complete.
S & F in repair stop valves cast copper alloy, screwed down, high pressure with butterfly handle, screwed both ends for iron pipe or for unions 15mm bore.
S & F in repair CP brass shower rose 125 mm dia all as specified.
S & F in repairs 20 mm size gun - metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed.
M & L for vitreous china squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests including PVC(SWR) 'P' or 'S' trap connecting to flush pipe and to anti syphonage pipe,all as per CERA Cat No CALINA S 3010102 or techno commercially equivalent makes specified in PS. complete including making good to floor fixed in repairs complete all as specified and directed.
S & F in repairs PVC High/Low level flushing cistern 10 litres capacity including all fittings i.e. float valve, syphon, flushpipe,brackets all as specified and directed by Engr-in-Charge.
S & F in repairs vitreous china wash hand basin white flat back size 550x 400 excluding taps waste chain and plug and porcelain stopper but incl necessary brackets CP brass wastes couplinng and other fittings all as specified.
S & F PVC connections 15 mm dia with brass nut on both ends and washers 450 mm long all as specified and directed.
M & L for PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia 610 mm long fixed in repairs complete all as specified and as directed.
S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered ( Hot or cold) with long screwed shanks and fly nuts screwed for iron pipes 15 mm dia all as specified.
S&F galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks, or galvanised wire staples including necessary beading all as directed by Engr - in - Charge.
S&F in repairs PVC (SWR) pipes, single socketed, in any length, with rubber ring joints 110 mm dia, type 'B' laid in trenches or floors or fixed to walls complete all as specified and as directed.
S&F in repairs PVC (SWR) bends, (any radius ), deminishing pieces or tapers, bore of pipe 110mm dia, complete all as specified and as directed.
S&F for provision of 75 mm dia of outlet PVC (SWR) floor trap, plain with stainless steel grating including jointing with solvent cement
Taking down steel tubing and connection 15mm bore.
Taking down steel tubing and connection but 20mm bore.
S&F tubes 15mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.
Fixing only tubes 15mm bore, any grade, to walls and ceilings or laying in floors etc complete all as specified.
S&F tubes 20 mm bore medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified.
Fixing only tubes 20mm bore, any grade, to walls and ceilings or laying in floors etc complete all as specified.
Cutting chases, pinning & making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete.
Dismantling structural steel work including doors, gates but excluding framed truss etc.
S&F Rolled mild steel Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with & including either hooks & hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails & guides) & hanging; also fastening & fixing complete GDE Fe410-0 quality "A"
Taking down old rolling shutter and refixing the rolling shutter on same position , incl having 1.0 mm thick MS steel sheet, spring, MS safety lever locks with 4 lever, 3 nos of ball bearing and MS handles including all necessary greasing & easing, replacement of unserviceable parts incl one coat of synthetic enamel paint over a coat of primer (Note:- Parts replaced shall be measured and paid seperately)
Supply only MS steel sheet 1.0mm thick
Supply only spring suitable for rolling shutter
Supply only MS safety lever locks with 4 levers for rolling shutter
Supply only ball bearing for rolling shutter
Supply only MS handles 150mm in size for rolling shutter
M&L for 100mm thick PCC 1:2:4 type B2( using 40 mm graded granite stone aggregate) in flooring even and smooth surface without using extra cement complete all as specified and directed.
M&L for hard core of gauge not exceeding 63 mm of broken granite stone deposited spread and levelled in layers not exceeding 15 cm watered and rammed to a true surface in sub station complete all as specified and directed.
Hacking out old broken glass (any the size quality or description) from wooden or steel frames glazed all as specified and directed by Engr-in-charge.
S&F 3 mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.
Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground surfaces.
Excavating in post holes each n.exc 0.5 cum getting out returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good surface complete.
M & L for cement conc 1:3:6 type C-2 (40 mm graded aggregate) as in post/strut fdn complete.
M&L for MS work conforing to Fe-410-0 of Fe-310-0 Grade for fencing posts and struts in fencing including cutting bending top to shape as directed drilling holes matching for barbed wire, including fillet on back side of fencing post and all necessary drilling work complete and all as specified and directed.
S & F, in repairs, Galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings & straining and fixing to any type of post including screwing or tying at crossings with and provision of galvanised mild steel wire, staples as directed including taking out existing damaged barbed wire complete.
Dismantling chainlink fencing of any gauge & size not exceeding 4 Kg/Sqm complete all as directed by Engr-in-Charge.
Supply only Chain link fencing using 3.15mm dia GI wire mesh including line wires, any mesh, size & type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.
Fixing only chain link fencing including line wires, any mesh, size & type to any type of standards, rails, straining blots, etc. including provision of binding wire complete all as specified and directed.
S & F flat iron of size as directed as in fixing clamps or support to chain link fencing, stifners etc fixed with nut and bolts including making necessry holes complete all as specified.
S& F 10mm dia and over round bars cut to length bent to shape for stiffeners etc and similar work complete.
Mild steel screw bolts (machine made) 5 ot 10mm dia of shank with hexagonal or square heads at one end and screwed the othere, each screw end to be fitted with washers and one hexagonal or square nut exc 5cm but n exc 10cm long.
M & L for preparation of new steel and iron surfaces of any description over 10cms width or girth & applying 2 coats of synthetic enamel paint over one coat of red oxide primer complete.
M & L for Rotational moulded three layered polythene water storage tank white colour (cylindrical vertical with closed top) with ISI mark embosed on it, hoisted and fixed in position complete all as specified in SSR part I capacity of tank 1000 ltrs complete all as specified and as directed.
Dismantling of rusted/damaged mild steel sheeting of any thickness and size from iron gates of any size and welding of 1.25mm thick sheet welded or shouldered to angle iron frame complete all as specified and as directed by Engr in charge.
M&L for plain,black mild steel sheeting in gates, 1.25mm thick sheet welded or shouldered to angle iron frame and all as specified and directed.
S&F for frame work such as grill, grating etc with ends bars shouldered and / or riveted or forged into spikes, framed guard bars barred iron doors and similar work confiromg to Fe 290. Gde-165 complete all as specified and directed
S P DEVELOPERS
V.R.PRAJAPATI AND CO.
M/S SANDEEP CONSTRUCTION COMPANY
MANIYA CONSTRUCTION CO
DARSHAN ENTERPRISES
JP ENTERPRISES
S.R.M.K Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .