PROVN OF GSEGHE SHED WITH GANTRY FACILITY PERIMETER ROAD AND STORAGE SHED AT 1 WG AF SRINAGAR

Amount

Sch 'A' Part-I (Building Works) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 20 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-II, Sec-I (Internal Electrification) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 23 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-II,Sec-II (Internal Electrification) Note:- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

Supply and fixing epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door) 8 way VTPN suitable for MCCB DB's 415 Volts with 200 Amps rated bus bar, neutral & earthing link bar, flush/surface mounting complete all as specified and directed. Make Legrand/ABB/C&S/Havells

Supply and fixing MCB single pole ISI marked ISI Marked `B' series working on 240 Volts 50 HZ AC supply for incoming and out going controlling circuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed. Make Legrand/ABB/C&S/Havells

Supply and fixing MCB single pole ISI marked ISI Marked `C' series working on 240 Volts 50 HZ AC supply for incoming and out going controlling circuit of capacity 40 Amp breaking capacity 10 KA etc all as specified and directed. Make Legrand/ABB/C&S/Havells

Supply and fixing MCB single pole and neutral ISI marked `C' series working on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty 63 Amps 10 KA breaking capacity etc all as specified and directed. Make Legrand/ABB/C&S

Supply and fixing MCB triple pole and neutral ISI marked `C' series working on 415 volts 50HZ AC supply for incomming & out going controlling system of capaicty 40 Amps 10 KA breaking capacity etc all as specified and directed. Make Legrand/ABB/C&S/Havells

Supply and fixing MCCB TPN/FP 100 Amp fixed type 16 KA 100 A fixed thermal & fixed magnetic setting suitable for 415 volts. Make -legrand/C&S/ABB/Havells

Sch 'A' Part-III (Lightening Protection) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 26 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-IV, Sec-I (EOT Crane) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 27 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-IV, Sec -II (EOT Crane) Note:- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

Supply, Installation in Position, testing & commissioning of electromechanical EOT Crane Double Girder type as per IS 3177& IS 807, indoor, for hazardous area of 3 Ton capacity in building of size 15 mtr x 12mtr x 7.0 mtr (approx) with approach upto each end of building ie. long travel, cross travel and hoisting having control through flameproof push button pendant complete including all other acessories i.e. brakes, Gear boxes, platform,ladder, Flameproof wiring, Flame proof Control panel etc. which are required for proper functioning of crane & having the following components. Make- DE Mag India Pvt Ltd/ M/S KONECRANES India Pvt Ltd/ M/s Rockwell Hoist Cranes Pvt Ltd/ M/S Hercules Hoist Ltd/ M/S Turbo Furguson India Pvt Ltd/ M/S Dinesh Enterprises/ Cranex Ltd (a) Capacity 3 Ton (b) Long travel distance - 15 mtr approx (c) Cross travel distance - 12 mtr approx (d) Hook lift - 6.0 mtr (e) Main Hoist Speed : 3 mtr/min speed with micro Speed 0.3 mtr/min (f) Cross travel speed : 10.0 mtr/min with facility of micro Speed of 1.5 Mtr/Min. (h) Double box girder EOT type Crane (j) Hermetically sealed motors as per load (k) Brakes- EHT type (l) Indoor type for hazardous area (m) Buffer for cross and long travel : Rubber buffers. (n) Festoon Type DSL system for cross travell as well as long travel.

(o) L.T rail of 50x50mm Sq bar (p) Gantry Girder (ISMB 300x140) with 250 capping channel upto column to column strength 5 mtr max (q) Limit switches-02 nos snap action type for main hoist and one each two way lever type for cross travell and long travel as per IS 3177 (r ) Hook type- C shank type with safety latch (s) Gear box- cast iron fabricated helical type totally enclosed with oil bath lubrication. (t) Platform on both sides of the bridge girder with non skid 5 mm thick steel chequered plate provided along the entire length of crane bridge span having width 0.5mtr securely fenced with double tired guard rails having a minimun height of 1.1mtr. (u) Access ladder on both side of bay to facilitate maintainance of crane. (v) Wireless radio remote control facility incorporating control of movements in all directions. Radio remote control device complying with EU R&TTE directive and EMC/ERM standards for short range devices. The remote control should be explosion proof. The range of operation should be 50mtr minimum.

Sch 'A' Part-V, Sec-I (Road Works) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 30 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-V, Sec-II (Road Works) Note:- This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

Material and labour for preparing bituminous surfaces of road and marking 2.5mm thick centre lines, stop lines, dashes, arrows etc. and the like not exc 10cm wide on roads pavements with hot applied thermo plastic road marking paint of approved colour confirming to BS 3262-1989 with special applicator machine all as per manufacturers instruction complete all as specified and directed

Sch 'A' Part-VI, Sec-I (External Electric Supply) Note: Prepriced at par with SSR Part-II (2020) at Serial Page No 33 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-VI, Sec-II (External Electric Supply) Note : This schedule is not pre priced by MES and the pre priced rate indicated as "Rs.0.00" under Col 5 signifies this fact only.

Supply and fixing 140W (Flood light) energy saving, environmental friendly, long life, exclusive innovative die cast aluminium IP65 flood light, suitable for highlighting architectural facade and general purpose lighting complete all as specified and directed by Engr-in-Charge. Make- Syska/Havells/Legrand

Sch 'A' Part-VII (Area Drainage) Note : Prepriced at par with SSR Part-II (2020) at Serial Page No 36 and contractor has to quote the estimated amount under Col 6

Sch 'A' Part-VIII (Perimeter Road and Storage Shed) Note : Prepriced at par with SSR Part-II (2020) at Serial Page No 38 and contractor has to quote the estimated amount under Col 6

G N Constructions