Fencing Material Purchase

RCC Fencing Pole Height – 2 .0 M Type – Straight Length – 2.00 M, Dimensions – Bottom 10 x 10 cm square, Top 8x8 cm square Cement Concrete Mix – Cement Sand and metal 1:2:4 with 12.5 nominal size coarse aggregate. Sand used should be free from clay and salt. Concrete mix shall be conforming to grade M-15 of IS :456:2000 Reinforcement – 4 round vertical bars of 6 mm diameter 11 nos of stirrups of 6 mm diameter round MS Bar 20 cm centre to centre Hooks – 5 no, bottom hook should be provided 60 cm above the bottom of the pole, second at 82.5 cm, third hook at 112.5 cm, fourth hook at 150 cm, top and fifth hook at 195 cm from bottom. Manufacturing – In order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5 cm.

RCC Fencing Pole Height – 2.45 M Type – Straight Length – 2.45 M, Dimensions – Bottom 10 x 10 cm square, Top 8x8 cm square. Cement Concrete Mix – Cement Sand and metal 1:2:4 with 12.5 nominal size coarse aggregate. Sand used should be free from clay and salt. Concrete mix shall be conforming to grade M-15 Reinforcement – 4 round vertical bars of 6 mm diameter 13 nos of stirrups of 6 mm diameter round MS Bar 25 cm centre to centre Hooks – 7 no, Top hook should be provided 100 cm below the top of poles, and bottom hook should be provided 500 cm above the bottom of poles. The central distance between the top and bottom hooks shall be equally divided to fix remining hooks. Manufacturing- in order to ensure desired compressive strength, RCC fencing poles should be compacted with the help of platform vibrators, Surface should be uniform and free from voids. The concrete cover over the reinforcement should not be less than 1.5cm

PRCC Fencing Pole Height – 2.0 M Each fencing pole shall be of square cross-section measuring 100mmx100mm. The pole shall contain 4 Nos. vertical reinforcements mode of 4 mm diameter high tensile steel wire. Each2.4 Meter fencing pole shall be provided with 7 Nos. Holes. The top hole shall be provided at 100 mm below the top of the pole. The bottom hole shall be provided at 500 mm above the bottom of the pole. The center to center distance between the top and bottom holes shall be equally divided for the remining holes. 'J' hooks shall be made of 6 mm diameter MS bars with proper threading at one end, along with nut and washer for tightening purpose. The 'J' bolts/hooks shall pass through the holes provided in the fencing poles.