GE/PNH-68/2024-25

Amount

M&L for complete removal of existing treatment and applying two coats of white wash on walls complete all as specified and directed.

M&L for omplete removal of existing treatment and applying two coat of oil bound distemper (any tint) on walls complete all as specified and directed.

M&L for preparation of old surfaces of plastered or unplastered and applying one coat of cement base paint on wall and AC sheet roof surfaces (any tint) all as specified and directed

M&L for preparation of old steel surface / CGI/PGI sheets and applying one coat of synthetic enamel paint in camouflage pattern, complete all as specified and directed.

Hacking out old broken glass, n.exc 1.5 Sqm each (any thickness, size, quality or description) from wooden/ steel frames or stone, concrete or brick surrounds,glazed with putty or fixed with beads, complete all as specified and directed.

Dismantling water tanks of any size or capacity and removing to store not exceeding 500 litre capacity, complete all as specified and directed.

Dismantling water tanks of any size or capacity and removing to store not exceeding 1000 litre capacity, complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

Dismantling mild steel work of any description and in any position, complete all as specified and directed.

Demolition of brick work or stone/ boulder masonry built in cement mortar including all quoins arches pillars etc, complete all as specified and directed.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floors and paving n exc. 15 cm. thickness, below or above ground level, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing ), removing serviceable tile to store and rubbish off the premises, complete all as specified and directed.

Dismantling or wall/ceiling board (fibre, pulp, insulation, etc) or insulation board.slabs/ blankets, of any thickness, including cover fillets complete all as specified and directed.

S&F 4mm thick E-board (Classic) including fixing of frame work made up of special section MS galvanised sheet with zink coating cellular intro painting and consisting of angle cleats of size 25mm wide 1.6mm thick with flag fixing to the ceiling with dash fastner 12.5mm x 40mm long or with 2mm dia GI wire or fixed with bolt in GI channel main 35x25x0.5mm thick and cross runner 25x25x0.5mm for fixing E-board of size 600x600x4mm thick including fixing of E-board with ceiling section and parimeter of channel 25x25x1mm thick,27mm high flange of 20mm to 30mm long extra, complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, valley gutter and similar works fixed with self tapping screws as specified.

S & F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing(Beam,tee, angle, channel or flat sections) incl distance pieces, cleats, etc conforming to grade Fe-410W-(Gde E-250 Quality A), complete all as specified and directed.

S&F Mild Steel rolled section in purlin, main and cross beam, rafter, posts etc. incl connected cleats, hold fasts etc of grade conforming to Fe 410-W (Gde E-250 quality A) all as specified and direcetd.

M & L for PCC (1:3:6) type C-1 using 20mm graded stone aggregate, 50mm thick as in plinth protection finished fair & even laid in alternate bays n.exc 2m in length and joints filled with bitumen mastic 1:3 complete all as specified and directed.

M & L for 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring, etc, complete all as specified and directed.

M & L for 100mm thick PCC 1:4:8 type D-2 (using 20 mm graded stone aggregate) as in flooring, etc. complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-1, (using 20 mm graded stone aggregate) as in bed blocks, coping, benching and similar work including necessary form work complete all as specified.

M&L for chequered cement concrete tiles with mixture of white and grey cement in equal proportion and no pigments of size 30cmx30cmx25 mm thick, set, jointed and pointed in neat cement surry in floors including 20 mm thick screed bed in CM 1:6 for laying floor tiles complete all as specified and diected.

M&L for Vitrified ceramic light shade tiles 10mm thick (square/rectangular) polished, area of each tile not exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6 all as specified and directed

All as per Item above but in skirting over and incl 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for coloured Non Skid ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured tiles cement to match with & incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.

All as per Item No. 27 above but in vertical surfaces such as skirtings, dados and risers to steps etc including 10 mm thick rending in CM (1:4) complet all as specified and directed.

M & L for coloured non skid ceramic tiles exc 0.18 sqm but not exc 0.38 Sqm, 7 to 8 mm thick, as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed.

M&L for Glazed ceramic colour tiles as in vertical surfaces of size 300x 200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including over 10mm thick screed cement mortar 1:4 complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius in CM 1:6 all as specified and directed.

M & L for Walling of random rubble masonry, brought upto course, built in CM 1:6 complete all as specified and directed.

All as per srl item No 32 here-in-above but except stone, complete all as specified and directed.

Extra over stone walling for hammer dressing to face stones and dressing or face beds and joints with max depression 20 mm as specified, of random rubble walling, uncoursed or brought upto courses, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1: 4 on other than fair faces of brick work, stone work or concrete surfaces, chajja and suspended work finished even and smooth without using extra cement, complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1: 6 on other than fair faces of brick work or concrete surfaces, finished even and smooth with out using extra cement, complete all as specified.

M&L for applying two coats of cement base paint on walls including preparation of new plastered or un-plastered surfaces of wall complete all as specified.

M&L for preparation of newly plastered surfaces and applying two coats of oil emulsion distemper complete all as specified and directed

Taking down chowkhats or frames n exc 1.50 Sqm with shutters (without taking off shutters from the frame), complete all as specified and directed.

Taking down chowkhats or frames with shutters exc 1.5 Sqm but n.exc 4 Sqm (without taking off shutters from frame), complete all as specified and directed.

S & F 35 mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat, complete all as specified and directed.

S&F Solid PVC moulded door frame of size 50mmx47mm made out of 5mm prelam coloured PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet as reinforced with MS square tube and fixing in opening as specification & drawing complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick, (styles) with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam (Nut Brown Colour) PVC Sheet on the front face & 2mm prelam (Nut Brown Colour) PVC Sheet on back face, and fixing in the frame at site as per specification and drawings on page 161 of SSR (Part - II) 2010 complete all as specified and directed. NOTE : Cadmium screws to be used for fixing and fixtures

S & F pressed steel frames of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed, complete all as specified and directed.

S&F 75mm long butt hinges, medium weight cold rolled, complete all as specified and directed.

S & F 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed, complete all as specified and directed.

S & F 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S & F 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed.

S & F 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples as specified and directed.

M&L for preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide zinc chrome complete all as spd & directed.

M&L for PCC 1:3:6 type C1, using 20 mm crushed agg.as in bed blocks for embedding hold fast etc., complete all as specified and directed.

S&F in repair bib tap fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwed for 15 mm bore iron pipe or for brass ferrule and fixed, complete all as specified and directed.

S & F rotational moulded synthetic (HDPE), water storage tank triple layer, 500 litre capacity (cylinderical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, complete all as specified & directed.

S & F rotational moulded synthetic (HDPE), water storage tank triple layer, 1000 litre capacity (cylinderical vertical with closed top,) hoisted & fixed in position all as specified in SSR Part-I, complete all as specified & directed.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed

Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each, Complete all as specified and directed.

Taking down shutter of any description,not exc 1.0 sq.m each, Complete all as specified and directed.

S & F 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a), supplied & fitted to chowkats.

All as per item No 62 above but 30 mm thick for window / ventilators complete all as specified and directed by engr in charge.

SUNIL KUMAR SANGEET KUMAR AND SONS (BID ID -3214204)

JAMWAL CONSTRUCTION CO (BID ID -3216101)

M/S SEVEN LAKE CONSTRUCTION (BID ID -3216308)

M/S KHAN ENTERPRISES (BID ID -3216111)

Maqsood Ahmed (BID ID -3215699)

M/S BADRI NATH GUPTA (BID ID -3213147)

Modh Hafiz Khan (BID ID -3212310)