Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.7 LAccepted-AOC 300 PREM BASTI 10 SANGRUR SANGRUR PUNJAB 148001 | SANGRUR | PUNJAB | 148001 | L1 | Accepted-AOC Being lowest bidder | |
| 2 | L2₹34.0 L+₹5.3 L (18.5%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹36.8 L+₹8.2 L (28.4%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹38.8 L+₹10.1 L (35.2%)Rejected-Finance 6 C SHEKHAWAT COLONY SIRSI ROAD MEENAWALA JAIPUR | JAIPUR | JAIPUR | RAJASTHAN | 302012 | L4 | Rejected-Finance Being L4 |
Tender Value
Refer Docs
EMD Value
₹80,000
Closing Date
21 Mar 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
SHRI ANKUR LOHIYA, IDSE
MILITARY ENGINEER SERVICES GARRISON ENGINEER SOUTH TARAPORE ENCLAVE PATIALA CANTT
As per tender documents
2023_MES_631836_2
GE(S)/PAT-58/N/2023-24
Open Tender
Civil Works
Item Rate
150 days
MIL STN NABHA
Refer tender documents
8 documents required · 8 mandatory
₹500
Yes
GE (SOUTH) PATIALA
₹80,000
Yes
30 Mar 2024
28 Feb 2024
23 Mar 2024
28 Feb 2024
21 Mar 2024
7 Mar 2024
28 Feb 2024 - 6 Mar 2024
Amount
Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed by Engr-in-Charge
M&L 25mm thick PCC (1:2:4) type B-0 using 12.50 mm graded crushed stone aggregates in complete all as specified and directed by Engr-in-Charge
M&L for ceramic tiles floor tiles of minimum size 600X600 mm 8 to 10mm thick in flooring etc set and jointed in neat cement slurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid over complete all as specified and directed by Engr-in-Charge
M&L Coloured glazed ceramic tiles (600 x 100 mm) x 8 to 10mm thick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and directed by Engr-in-Charge
Dismantling of floor or wall tiling including cement mortar bedding but not backing and removing the rubbish off the premises complete all as specified and directed by Engineer-in-Charge.
M&L for anti skid coloured pressed ceramic floor tiles of minimum size 300X300 mm 8 to 10mm thick in flooring etc set and jointed in neat cement lurry and pointed in white cement to match over and including 20mm thick screed bed in CM (1:4) laid over in complete all as specified and directed by Engr-in-Charge
M&L Coloured glazed ceramic tiles (300 x 600 mm) x 7mm or (450X350 mm)X7mm thick as in vertical surfaces such as skirtings, dados etc jointed in neat cement slurry and pointed in white or coloured cement to match, laid over and including 10mm thick back coat in CM (1:4), in complete all as specified and directed by Engineer-in-Charge.
M & L for 40mm thick PCC 1:2:4 type B1 (using 20mm graded stone aggregate) as in flooring finished even and smooth without using extra cementcomplete all as specified and complete all as specified and directed by Engineer-in-Charge.
M&LMachine cut Kota stone slab flooring 20mm (+2mm) thick laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4 as base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge
M&L Granite (of any type) 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete laid over and including 15mm thick screeed bed or bedding layer in CM (1:4), in complete all as specified and directed by Engr-in-Charge
Dismanteling 500ltr water storage tank and removing to store. complete all as specified and directed by Engineer-in-Charge.
M&L Rotational moulded polythene water storage tank cylindrical vertical with closed top 500ltr capacity hoisted and fixed in position incl 20 mm bore ball brass valves high pressure with polythene float and fly nut all as specified in SSR Part-1. complete all as specified and directed by Engineer-in-Charge.
Taking up or down steel tubing of 15mm dia and removal to store complete all as specified and directed by Engineer-in-Charge.
S&F medium grade galvanised steel tubing with all fittings fixed to wall or laid in floors for 15 mm bore GI tubing.complete all as specified and directed by Engineer-in-Charge.
S & F 125mm Brass chromium plated shower rose complete all as specified and directed by Engr-in-Charge
S &F CP stop cock / cast copper alloy with crutch screwed down screwed for brass ferrule for 15 mm bore pipe after of any description complete all as specified and directed by Engineer-in-Charge.
S&F in repair Bib taps for 15 mm dia bore pipe cast copper alloy cromium plated with capstain head screwed down for iron pipe or brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge.
S&F in repair Pillar taps Cast copper alloy fancy type 15mm bore , with capstan heads chromium plated screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts scrrewed for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
S&F PVC enclosed case (cabin type) with cover and looking mirror over it with two shelves in it complete all as specified and fixed with screws on wall. complete all as specified and directed by Engineer-in-Charge.
S&F in repair gate valve 15mm cast copper alloy ,high pressure with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipe after taking down old gate valve of any descriptioncomplete all as specified and directed by Engineer-in-Charge.
S&F Angle stop valve(Concealed type) cast copper alloy chromium plated with capstan head , long shank and cup screwed down screwed for iron pipe or for brass ferrule for 15 mm bore pipeafter taking down old stop cock of any description complete all as specified and directed by Engineer-in-Charge.
S&F 450 mm long PVC connection with brass nuts on both ends for 15mm bore pipes of approved quality complete all as specified and directed by Engineer-in-Charge.
S&F Viterous china, wash hand basin, white, flat back, size 550x400mm including PVC waste pipe 32mm bore and mild steel brackets, fixed all in repairs, including cutting for or pinning in brackets complete all as specified and directed by Engineer-in-Charge.
S&F Tubular towel rail, CP 20mm dia, 60cm long between flanges fixed in repairs.complete all as specified and directed by Engineer-in-Charge.
S/F in repairs low level flushing cistern of PVC 10 ltr capicity incl 45cm long PVC connection with brass nut at both ends, 15 dia stop cock cast copper alloy,screwed both ends , high pressure(wt not less than as specified in SSR), PVC flush pipe 32 mm bore complete all as specified and directed by Engineer-in-Charge.
S&F Viterous china ware wash down water closet Orrisa pattern size 580x440mm white with integral foot rests including connection to traps and to flushing pipe, anti syphonage pipe complete fixed in repair.complete all as specified and directed by Engineer-in-Charge.
M&L fixed in repair Vitreous China urinals, half stall urinal complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe Urinal, bowl type or half stall pattern, basin only including connections to flushing pipe and outgoing pipes fixed in repairs
Dismantling of brick work built in cement mortar incl all quoins, arches, pillar etc complete all as specified and directed by Engineer-in-Charge.
M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed by Engineer-in-Charge.
M&L for brick work in cement mortar (1:4) using sub class 'B' bricks staight or curved on plan to any raidus but in half thick brick walls
M & L Taking down cement plaster of any description any thickness from external surface of walls / soffits etc including raking out joints, hacking for key, scrubbing down with water etc.complete all as specified and directed by Engineer-in-Charge.
M & L for 15mm thick ( in two layers of 10mm and 5mm thickness) cement pastering in cement mortar 1:4 and mixig the water proofing compound as per manufactures instructions on brick or concrete surface of wall finish complete all as specified and directed by Engineer-in-Charge. Note : Water proofing compound shall be measured and paid saparately
M&L for cement plastering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished complete all as specified and directed by Engineer-in-Charge.
M & L for Rendering 5mm thick cement plaster in CM 1:3 on concrete surfaces in ceiling/ Chhajjas finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.
Supply only integral water proofing compound ISI marked. complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new plastered or unplastered surfaces of walls, two coats of cement base paint over a coat of cement primer complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new plastered or unplastered surfaces of walls and applying two coats of distemper oil emulsion over complete all as specified and directed by Engineer-in-Charge.
M&L Preparation of new plastered or unplastered surfaces applying three coat of white wash on ceiling surfaces all as specified.
M&L PCC (1:3:6), 50mm thick as in PCC path/ plinth protection.finished the surfaces even and smooth with out using extra cement complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified.
S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with single rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 105x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
S&F Powder coated Pressed steel frames made of MS sheet of 1.25 mm thickness for doors with double rebate including necessary fixing lugs, hinges, lock strike plate, hold fasts ,filling PCC (1:3:6 Co) in chowkhats , PCC 1:2:4 B1 hold fast blocks etc., complete as specified,size 125x 60mm including cutting holes and making good reqd to shape for hold fast blocks for new frame complete all as specified. ( Note :- Disturbed portion of existing floor /wall / tile / plaster etc duing fixing of chowkhats shall be repaired to match with existing finish .Cost of the same will be included in this item )
S&F 35mm thick plain framed (Factory made) Panelled shutters of 2nd class HW with lock rail and panels of 9mm B.W.P commercial ply including beading on the facing side of shutters as per SSR Part I clause No 8.17.5. The size of rail and stiles as per IS 1003 (Part I) kiln seasoned and chemically pressure treated all as specified. complete all as specified and directed by Engineer-in-Charge.
S&F 35mm Glazed and skeleton shutters, 2nd class hard wood open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.
S&F in stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. all as directed. complete all as specified and directed by Engineer-in-Charge.
M&L preparing of new surface of wood and wood based material of any description not otherwise described over 10cm width or girth and applying two coat of synthetic enamel pain and one coat of pink primer all as specified and directed. complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel barrel tower bolt 200mm long stove enamelled black with bright bolt and fixed complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel sliding door bolt of size 250mm , stove enamelled black with bright bolt not less than 16mm dia, with and including a minimum of 6 bolts and nuts, complete all as specified and directed by Engineer-in-Charge.
S&F MS pressed handles of size 125mm oval type stove enamelled black. complete all as specified and directed by Engineer-in-Charge.
S&F Mild steel butt hinges of size 100mm medium weight cold rolled. complete all as specified and directed by Engineer-in-Charge.
S&F 300 mm long MS rat tail pattern spring hinge including roller and roller plate, complete all as specified and directed by Engineer-in-Charge.
Taking down chowkhats or frames (without taking off shutters from the frame) Not exc 1.5 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engineer-in-Charge.
M&L Factory made steel windows box type using ERW hollow 'P' section comprising double frame for glaged and gauged skelton shutters jointed interally with flat iron 40x4mm complete including grill of 8mm square bar, fixed horrizontally @ 10cm centre to centre, hinges,handle tower bolts,lugs etc all as shown on drawing noTD-219(c) sheet 1/3 to 3/3 and TD-220 (c) sheet 1/3 to 3/3 as applicable complete Note;- (i)for the purpose of measurement& payment double shuttre with frame shall be considered as one unit. (ii) Glaging ,, wire mesh and glass, measured and paid for separately complete all as specified and directed by Engineer-in-Charge.
S&F 30mm thick PVC door factory made solid panell shutters concisting of frame made out of MS tubes for top and bottom rails, MS frames shall be covered with hit moulded plain coulour PVC 'C' chanel having a PVC sheet strip of 20mm width stuck in side with screws. complete all as specified and directed by Engineer-in-Charge.
S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, fixed in opening as per specification and drawing
S&F 100 mm size PVC butt hinges all as specified. complete all as specified and directed by Engineer-in-Charge.
S&F 125MM PVC handles all as specified and directed. complete all as specified and directed by Engineer-in-Charge.
S&F 200mm long PVC tower bolt all as specified and directed. complete all as specified and directed by Engineer-in-Charge.
Hacking out old broken glass (any thickness, size, quality or description from metal/wooden frame including punching or drilling out glazing pins/spring clips. complete all as specified and directed by Engineer-in-Charge.
S&F Sheet glass ordinary quality 4 mm thick and glazing with oil puttly or wooden beads in square not exceeding 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge.
S&F Machine pressed precast concrete inter locking paver block any shape and size made of M-35 grade concrete (with grey cement and no pigment) of 60mm thickness with 6mm top layer of anti abrasive material laid over 25mm thick (compacted) fine sieved sand complete all as specified and directed by Engineer-in-Charge.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in sub base of flooring. complete all as specified and directed by Engineer-in-Charge.
M&L for chequered cement concrete tiles with grey cement and pigment 20cmX 20cmX25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, over 20 mm thick cement screed bedding layer in cem,ent mortar 1:6, complete all as specified and directed by Engineer-in-Charge.
S&F sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs washers and wastes icluding bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed by Engineer-in-Charge.
S&F Fe290 (Gde E-165) Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening Note - Removing of old gate fixing new steel gate of hold fast , finish the surface included in this item. complete all as specified and directed by Engineer-in-Charge.
M& L for Preparation new steel surfaces of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of red oxide as in primer complete all as specified and directed by Engineer-in-Charge.
S&F mild steel chromium plated 20mm curtain rod with fixing brackets, stops rollerss complete incl fixing brackets, stops etc all as specified & directed as in repair . (For the purpose of mesurement and payment running length of curtain rod only shall be considered.) complete all as specified and directed by Engineer-in-Charge.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed by Engineer-in-Charge.
M&L anodised aluminium snap grid false ceiling of grid size 605x605mm consisting of aluminium main and "T' sectiopns of size 25x35x1.5mm thick and wall angles of size 25x 25x 1.5 mm thick suspended with GI wire suspenders of 6mm dia of suitable length and 8-10 mm thick gypsum board, 60x60 cm size fixed with staples on snap grid complete all as specified and directed by Engineer-in-Charge.
S&F PVC wall panelling of hollow section size 150x10mm (colour/pattern as approved by AO)complete fixed in position in all respect including supply and fixing of all accessories like fasteners/ screws/ solvent etc all as recommended by manufacturer all as complete all as specified and directed by Engineer-in-Charge.
Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed by Engineer-in-Charge.
Dismantling of asbestos cement sheets [corrugated, semi-corrugated, etc] in roof coverings complete all as specified and directed by Engineer-in-Charge.
S & F for pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/clading to wall, fixed to self tapping screws complete all as specified and directed by Engineer-in-Charge.
Dismantling of unservicable wrought iron or mild steel of any description complete all as specified and directed by Engineer-in-Charge.
M&L for rectangle / Squar /circular hollow section as in main and cross beams, hip and jack rafters purlins, where connected to common rafters and running rails and guides for structural purpose, fixed with angle cleats or other connecting plates to Fe-290 (Gde E-165) complete all as specified and directed by Engineer-in-Charge.
Demolition of Cement Concrete(Unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level)
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out as specified and directied by Engr-in-Charge
PCC 1:4:8, type D-2 using 40mm graded stone aggregate, as in foundation etc. complete all as specified and directed by Enge-in-Charge
Reinforced cement concrete (Design Mix), M30 (20mm graded aggregate) in Columns,Column Jacketing, pillars, piers, posts and struts all as specified and directed by Engr-in-Charge
Mild steel TMT bars 10mm dia & over cut to length, bent to shape required incl cranking bending with0.9 mm dia MS wire (annealed) not less than0.9 mm dia or securing with clips.
Ditto, but 6mm to 8mm dia in stirrups, spacers and binders
Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm in soft/loose soil, complete all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a lavel .exc 1.50 mtr above the starting point.
Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceiling roses, pendants, regulators, socket, lamp holders brackets, bulk head fittings etc removing material for taking credit ( credit shall be recovered as per credit Sch attached) and also making good disturbed surfaces of wall, floors etc all as specified and as directed by the Engineer-in-Charge.
M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit ( ISI Marked) of heavy duly with all accessories ie PVC gutties etc terminated in sunken/pressed metal flush box and white modular cover plate with frame for mounting of switches /sockets/ fan regulators etc and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth. (iii) Necessity cutting chasing where ever required shall be part of job & making good the disturbed surfaces shall be part of job.
All as per item No 87 above, but for one 3/5 pin socket outlet 5 Amp on the same board with other switches complete all as specified and as directed by the Engineer-in-Charge.
All as per item No 87 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.
All as per serial item No 87 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.
S&F in replacement modular switch 1 way, 6 Amps, 1 module completeall as specified.
S&F of modular type, switch 1 way, 16 Amps, 1 module complete all as specified.
S&F in replacement modular type, Bell push 1 way, 6 Amps, 1 module complete all as specified.
S&F in replacement modular type, socket 5 pin 6 Amps, 2 module complete all as specified.
S&F in replacement modular socket 5 pin 6/16 Amps, combination type 2 moduel complete all as specified.
S&F in replacement modular Fan regulator step type, 120 watts, 1 module complete all as specified.
S&F in replacment of Modular White Cover Plate with frame 1/2 module, made of Flame Retardent material compatible with standard size of metal flush box complete all as specified.
All as per item No. 97 above but for 3 module complete all as specified and directed.
All as per item No. 97 above but for 4 module complete all as specified and directed.
All as per item No. 97 above but for 6 module complete all as specified and directed.
All as per item No. 97 above but for 8 module complete all as specified and directed.
All as per item No. 97 above but for 12 module complete all as specified and directed.
S&F in replacment of GI Sheet metal flush box of 1/2 module duly prepainted and provided with terminal for safety including suitable size screws complete all as specified.
All as per item No. 103 above but for 3 module complete all as specified and directed.
All as per item No. 103 above but for 4 module complete all as specified and directed.
All as per item No. 103 above but for 6 module complete all as specified and directed.
All as per item No. 103 above but for 8 module complete all as specified and directed.
All as per item No. 103 above but for 12 module complete all as specified and directed.
S&F in replacment of switch piano, flush button type, single pole , one way 5 Amps complete all as specified and directed.
S&F in replacment of switch piano, flush button type, single pole , one way 15 Amps complete all as specified and directed.
S&F in replacment of socket outlet 3 pin and 2 pin, 5 Amps , flush type complete all as specified complete all as specified and directed.
S&F in replacment of socket outlet 2-in-1, 3 pin , 5 and 15 Amps, flush type complete all as specified complete all as specified and directed.
S&F in replacment of electronic fan regulator (5 Step, piano type) 280 Volts suitable for ceiling fan complete all as specified and directed.
S&F in replacment of ceiling rose surface type, 65 mm x 50 mm two to three terminals / PVC / polycarbonate, isolated body fixed on PVC block complete all specified and as directed by the Engineer-in-Charge.
M&L for sub main wiring two single core PVC insulated and unsheathed cable with 6 Sqmm multi -strand copper conductor drawing in PVC casing caping/ Conduit with 6 Sqmm PVC copper conductor cable as in earth wire system, including taking out old wiring complete all as directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) If Necessary cutting chasing shall be included in this item.
M&L for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 4 sqmm multistrand and 4 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble all as directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) If Necessary cutting chasing shall be included in this item.
M&L for Sub main wiring in PVC casing caping/conduit with 2 Nos single core PVC insulated copper conductor cable flame proof size 1.5 sqmm multistrand and 1.5 sqmm PVC insulated flame proof earth wire using suitable size of copper thimble all as directed. Note: (i) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth . (ii) Connections of cables with MCBs or bus bars shall be done through brass/copper thimbles of appropriate size . (iii) If Necessary cutting chasing shall be included in this item.
S&F in replacement of suspended type LED light suitable for 'A' veh garage suspended type with PDC Housing, elliptical shaped LED Highbay luminaire with PC Diffuser 100 watt Equipped with 4kv inbuilt surge protection, IP-65/66 Protection rating, 230 volts including cost of GI wire suitable for hanging the LED fitting upto 3 mtr down from truss structure all as specified and directed by engr-in-charge.
S&F in replacement of existing unserviceable Plug & Socket Box (sheet metal) with PVC Plug, SPN 20 Amps for Acs Note : (i) Including cost of masonary work involved and the disturbed surface shall be repaired/match with existing shall be part of job. Model No. - DHDPHSN020 of Make-Havells or equivalent as mentioned hereinafter.
S&F in replacement of existing unserviceable Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 4 way double door type with 200 amp rated bus bar. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job. Complete all as specified and directed.
All as per item No. 120 above but 8 way as per IS-8623, IP-54 complete all as specified and directed.
All as per item No. 120 above but 12 way as per IS-8623, IP-54 complete all as specified and directed.
S&F in replacement of existing unserviceable Sheet metal enclosure with DB’s suitable for MCBs of VTPN 4 way, 415 volt, double door as per IS-8623, IP-54 protection universal mounting copper bus bar with 200 amp rated bus bar double door type with one incoming and 12 outgoing Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble. ii) The disturbed surface shall be match with existing shall be part of job.
All as per item No. 123 but for 8 Way DB complete all as specified and directed.
All as per item No. 123 but for 12 Way DB complete all as specified and directed.
Supply and fix in replacement of MCB SP up to 6-32 Amp all as specified and directed.
Supply and fix in replacement of MCB SPN 6-32 Amp all as specified and directed.
S & F in replacement of existing MCCB TPN, 63 Amps, 415 volts, 16 KA complete fixing in DBs including proper thimbles connections all as specified and directed.
All as per item No. 128 but for MCCB TPN, 100 Amps, 25 KA complete all as specified and directed.
All as per item No. 128 but for MCCB TPN, 125 Amps, 25 KA complete all as specified and directed.
Supply and fixing 1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections, one twin core cable flat or circular stranded conductor size of 10 Sqmm, 2 core complete all as specified.
All as per item No. 131 but for 16 Sqmm, 2 core complete all as specified.
S&F in replacement of light fitting with new techonlgy LED having high efficiency of capacity LED 18/20 Watt, cool white FIXT ELITE PRIDE PLUS 20 W 6500K, Model No. LHEXBLP7PN1W020 of Make -Havells or equivalent as mentioned hereinafter incl necessary electric conection complete all as specified.
S&F in replacement of FTL with new techonlgy LED having high efficiency of capacity LED 18/20 Watt, Warm White FIXT ELITE PRIDE PLUS 20 W 6500K, Model No. LHEXBLP7PN1W020 of Make -Havells or equivalent as mentioned hereinafter incl necessary electric conection complete all as specified.
S&F in replacement of LED 10 Watt, 2 feet long, Cool day light with NEO Batten10 W 6500K having high efficiency Cat No. LHEXACP7IN1W010 of Make -Havells or equivalent as mentioned hereinafter incl necessary electric connection complete all as specified.
S&F in replacement of Mirror light with Linear & compact 7/9W mirror light with decorative grey end caps, polycarbonate body and ribbed opal diffuser of capacity 9 watt incl necessary electric connection complete all as specified..
Supply and fix in replacement of Recess mounted LED Warm White luminaire of 9 W LED 3000 K round shape and separate replaceable electronic driver, suitable for grid celling/POP Ceiling Cutout size dia 138 mm including fitment of LED Light in false ceiling/POP ceiling by cutout making, fit in existing cutout and making good the existing ceiling incl cost of lamp & driver.
Supply and fix in replacement of Recess mounted LED Warm White luminaire of 12 W LED 3000 K round shape and separate replaceable electronic driver, suitable for gridd celling/POP Ceiling Cutout size dia 160 mm including fitment of LED Light in false ceiling/POP ceiling by cutout making, fit in existing cutout and making good the existing ceiling incl cost of lamp & driver..
Supply and fix in replacement of Recess mounted LED Warm White luminaire of 15 W LED 3000 K Square shape suitable and separate replaceable electronic driver, suitable for grid celling/POP Ceiling cutout size dia 180 mm including fitment of LED Light in false ceiling/POP ceiling by cutout making, fit in existing cutout and making good the existing ceiling incl cost of lamp & driver..
Supply and fix in replacement of Recess mounted LED Warm White luminaire of 18 W LED 4000 K Square shape suitable and separate replaceable electronic driver, suitable for grid celling/POP Ceiling cut out size 210x210 mm recess mounted including fitment of LED Light in false ceiling/POP ceiling by cutout making, fit in existing cutout and making good the existing ceiling incl cost of lamp & driver.
Supply and fix in replacement of recess mounted LED luminaire 28 Watt CDL complete with all accessories incl cost of lamp & detachable driver suitable for false ceiling, dimensions, (600x600x70) mm.
Supply and fix in replacement of recess mounted LED luminaire 28 Watt Warm White complete with all accessories incl cost of lamp & detachable driver suitable for false ceiling, dimensions, (600x600x70) mm.
S&F in replacement of angular type lamp holder, PVC/ polycarbonate type with back plate suitable for upto 20 watt bulb for batten fitting, including plastic square board of required size complete all as specified.
S&F in replacement of LED Lamp 9 Watt.
S&F in replacement of LED Lamp 12 Watt.
S&F in replacement of LED Lamp 15 Watt.
S&F in replacement of Call bell ding dong AC 230 volt single pole complete all as specified.
S&F LED Bulk head fitting 10 W with Engineering plastic housing &clear prismatic diffuser, heat sink itegrated including smd LED 10W complete.
S&F LED Spot/focus Light 9/10 W with metal body including LED 10W complete fixing & testing all as specified and directed.
S & F new generation energy saving and environmental friendly long life LED building security light 1x25 watts made up of pressure die cast alluminium housing with high power LED as light source and lense embedded PC cover having TOP OPENING separate driver compartment with IP65 protection and impact resistance of IK07, with all accessories including suitable bracket with 32mm bore light grade GI pipe bemd to shape, including MS clamp of size of required size and PVC cable 1.5 Sqmm twincore from ceiling rose to light fittings complete all as specified and directed.
M&L for replacement of existing unserviceable earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I
S&F in replacement of PVC Conduit of size 20 mm incl all connected accessories (bends, clamps, PVC union & screws etc) for existing wiring all as directed.
Supply, laying, Jointing connecting LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 10 sqmm 2 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.
Supply, laying, Jointing connecting LT UG cable XLPE insulated,PVC bedded galvanised steel strip or wire armoured, heavy duty electric cable with aluminium conductor, 1100 volts grade, cross sectional area 16 sqmm 2 core laid in trenches / on poles / walls / in ducts / passing through pipes and including necessary cable lugs, bolts, nuts and washers complete all as specified and directed.
S&F 1.50 sqmm copper conductor cable (multistrand) FRLS single core PVC insulated cable (in RYB colours).
Excavation in trenches not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and getting out in any type of soil complete all as apecified and directed.
M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable complete all as specified.
Returning filling in including, spreading,levelling,watering and well ramming in layers not exc 25cm thick each complete all as specified and directed.
Removing excavated material to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.
Supply and laying GI tube 40 mm light grade as in cable protection pipe including all fittings & taking down / taking out from trench complete all as directed.
M&L for laying of well burnt Brick 23 cm x11.5 cm x7.5 cm for cable protection complete all as directed.
LM CONSTRUCTIONS
m/s panchmukhi builders
m/s k.k. construction co.
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .