AUGMENTATION OF WATER SUPPLY SCHEME LOHARU TOWN BY PROVIDING CANAL BASED WATER WORKS DISTRICT BHIWANI

Amount

WATER TREATMENT PLANT (WTP) Design & construction of 5.00 MLD capacity automated PLC controlled water treatment plant at Water Works Loharu including interconnecting DI pipe from raw water pump to inlet box of WTP, CWT & Suction Well for CW , inlet channel, Alum dozing, Flash mixing, Clari floculator, filter box, over head Reservoir for back wash including pump sets and electric control panel, waste water tank including pump sets and electric control panel, DI pipes, DI specials, manhole covers, air scour equipment, chemical house including chlorination equipment and all other civil / mechanical / electric installations complete in all respects as per DNIT (Sluice valves of make IVC/VAG)

RAW WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame RAW WATER PUMPING STATION 7400 LPM X 50 M. Head

WATER WORKS 5200 LPM X 12.50 M. Head

CLEAR WATER PUMPING MACHINERY Supply & Eraction of Horizontal spindle split casing type pumping sets of following duties directly coupled to AC squirrel cage induction type motor with accessories as described in Schedule No II complete in all respect with priming arrangement with complete base frame WATER WORKS 5200 LPM X 45 M. Head

MBS 2400 LPM X 40 M. Head

2500 LPM X 30 M. Head

1500 LPM X 35 M. Head

400 LPM X 25 M. Head

BOOSTING STATION NO.1 3600 LPM X 40 M. Head

BOOSTING STATION NO.2 1600 LPM X 40 M. Head

BOOSTING STATION NO.3 2400 LPM X 40 M. Head

BOOSTING STATION NO.4 2900 LPM X 40 M. Head

BOOSTING STATION NO.5 600 LPM X 40 M. Head

PANEL BOARDS FOR MOTORS Supply, erection, testing & commissioning of wall mounted electrical L.T. Panel board, fabricated from 16 SWG CRCA sheet duly stouted with suitable angle iron frame work and completely powder coated of approximate size 1200 x 900 mm and 400 mm deep having following items For 2 no Pumping Sets of 7400 LPM x 50 m Head a) Main switch 250 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 7400 LPM x 50 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.2

For 2 no Pumping Sets of 5200 LPM x12.50 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB)b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T)c) Digital Multi function meter = 1 No.d) SPP = 1 No. of approved makee) Motor starter, Star delta for 5200 LPM x 12.5 m Head = 2 Nos (L&T Siemens, ABB)f) VSS 1 No. & ASS 2 Nos. of approved make.g)Capacitor KVAR as per site requirement = 1 No.h) Indicating Lamp = One Seti) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.3

For 2 no Pumping Sets of 5200 LPM x 45 m Head a) Main switch 200 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 5200 LPM x 45 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.4

For 2 no Pumping Sets of 2400 LPM x 40 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 2400 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.5

For 2 no Pumping Sets of 2500 LPM x 30 m Head a) Main switch 100 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 2500 LPM x 30 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.6

For 2 no Pumping Sets of 1500 LPM x 35 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1500LPM x 35 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.7

For 2 no Pumping Sets of 400 LPM x 25 m Head a) Main switch 63 amp. 1 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 400 LPM x 25 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.8

For 2 no Pumping Sets of 3600 LPM x 40 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 3600 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g) Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 1.9

For 2 no Pumping Sets of 1600 LPM x 40 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 1600 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2

For 2 no Pumping Sets of 2400 LPM x 40 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 2400 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.1

For 2 no Pumping Sets of 2900 LPM x 40 m Head a) Main switch 100 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 2900 LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.2

For 2 no Pumping Sets of 600LPM x 40 m Head a) Main switch 63 amp. 2 No. (L&T Siemens, ABB) b) CT 100/3 = 2 Nos. (AE/ KAPPA/ L&T) c) Digital Multi function meter = 1 No. d) SPP = 1 No. of approved make e) Motor starter, Star delta for 600LPM x 40 m Head = 2 Nos (L&T Siemens, ABB) f) VSS 1 No. & ASS 2 Nos. of approved make. g)Capacitor KVAR as per site requirement = 1 No. h) Indicating Lamp = One Set i) Change over switch of suitable Amp = 1 No. (Each) Ref. sr. no. 2.3

Supply, erection, testing & commissioning of IS marked copper wire for various motors with underground system in PVC and flexible pipes copper wire 3 core complete in all respevts with accessories like thimble etc. 10mm2 3core

25mm2 3core

40mm2 3core

60mm2 3core

90mm2 3core

Sluice Valves / NRV & specials for Pumping Machinery Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 including cost of jointing material complete in all respect. (IVC / VAG make, Kirloskar) 100 mm i/d

Supplying,fixing, testing & commissioning of DI swing check type reflux valve (non returned valve) PN 1.6 including cost of jointing material complete in all respect.( IVC / VAG , Kirloskar make) 100 mm i/d

Supply, fixing & testing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 100 mm i/d

Supply, erection, fixing & testing of DI Double flanged pipe complete with all jointing materials 100 mm i/d

Sluice Valves/ Specials For Rising Mains Supplying, fixing, jointing, testing & commissioning of DI sluice valves resilient sheet P.N. 1.6 as per DNIT specification on the pumping machinery & head works including cost of jointing material (IVC / VAG make) 150 mm i/d

Supply & Fixing of Mechanical Joints PN 1.6 alongwith ruber gaskit & galvanized nuts / bolts complete in all respect. 150 mm i/d

Providing & fixing of D.I. Kinetic Air Valve soft seated as confirming to I.S.I. complete in all respect. 80mm

Supply erection testing and commissioning of exhaust fans each having a capacity of 45 cubic meters per minutes, complete in all respect.

Supply erection & testing of Ceiling fan of size 48" i/d (1200 mm) of reputed ISI make complete in all respect.

Providing and fixing of insulated Rubber matting suitable for HKV installation 1 meter x 2 meter x 12 mm as per specification.

Supplying and fixing of Gantry with chain pulley block of following capacity with traveling trolley of appropriate lifting capacity for handling of pumping sets capable of moving along the girders to be provided in the pump house complete in all respects as per specifications approved by Engineer-in-Charge. 2Ton Capacity at W/W & MBS

Supply erection, testing & commissioning of light fittings including complete wiring alon with all material upto 10 points including switch, button, plug, PVC conduict pipe & copper wire etc. as per approved specifications. ( 5 no. pump chambers of Boosting Stations + 1 HT Meter Room)

Providing & fixing suitable size floating arm along with swivel bend as per required specifications approved by Engineer-in-Charge

Supply erection, and commissioning electric operated dewatering pump of 3 HP Kirlosker make complete from priming with wiring starters switches etc. also the required GI pipe (B Class) valves etc complete in all respect. (1 at Water Works + 1at MBS = 2 no )

Supply, erection testing & commissioning of caste iron sluice Gate valve of 1000 x 600 mm of 20 mm thickness with actuators for S & S Tanks with all acessories along with rising spindle including cost of all jointing material complete in all respect. (IVC / VAG make)

Supply erection testing of reputed make LED light 100 wats with fittings and accessories complete in all repects. (4 at ww + 2 at MBS + 10 no. at various Boosting stations)

Supply erection testing and commissioning of Flow Meter (KRONE Make) with digital display of 150 mm i/d complete in all respect.

Supply erection testing and commissioning of Gas clorinator including all material, labour complete in all respect entire satisfaction to the Engineer-in-charge. (1 no. at MBS + 5 no. at various Boosting stations)

Design, Supply & Erection of copper wound outdoor type Transformers of required KVA as mentioned below on load tap changer or suitable capacity on higher side of standard make outdoor type, VCB Panel, G.O. Switch, H.T. Metering Panels, APFC Panels along with for each Transformer, 11KV Substation, entire cable network from G.O. Switch to H.T. Metering equipment and from H.T. Metering to Transformer Main to L.T. Panel, Earthing, safety equipment and any other contingent thereto complete in all respect as per DNIT and getting it passed from Chief Electrical Officer including operation & Maintenance of 5 Years. At Raw water pumping station = 160 KVA

At Loharu W/W = 160 KVA

At MBS Loharu = 160 KVA

At VBS-3 Loharu = 63 KVA

At VBS-4 Loharu = 63 KVA

Design, Supply & Erection of 2 No. DG Sets of required KVA as mentioned below suitable capacity on higher side capacity with Acoustic Canopy, AMF Panel and Copper Earthing of suitable rate with change over switch & synchronizing panel complete as per DNIT including operation & Maintenance of 5 Years. At Loharu W/W = 160 KVA

At MBS Loharu = 125 KVA

Operation & Maintenance Operation & Maintenance of the scheme for 12 months during defect liability period after trail run of 3 months and 5 year thereafter. Defect liability period (Only items in which fault will be found then it will be replaced by the contractor at his own cost).

Operation & maintenance during 1st year

Operation and maintenance during 2nd year

Operation and maintenance during 3rd year

Operation and maintenance during 4th year

Operation and maintenance during 5th year

Bidder Name

Amount

MAHA LAXMI CONSTRUCTION COMPANY

Jai Shree Balaji Constn Co.

M/S SHREE BALAJI BUILDERS

SHEOKAND CONSTRUCTION COMPANY

BADESRA CONSTRUCTION

Yuvaan Constructions

M/S SHREE BALAJI BUILDERS

Yuvaan Constructions

MAHA LAXMI CONSTRUCTION COMPANY

Jai Shree Balaji Constn Co.

SHEOKAND CONSTRUCTION COMPANY

Yuvaan Constructions

BADESRA CONSTRUCTION

MAHA LAXMI CONSTRUCTION COMPANY

Jai Shree Balaji Constn Co.

SHEOKAND CONSTRUCTION COMPANY