REPAIR TO SOFA AND CERTAIN MAP FURNITURE/ TRADE PATTERN FURNITURE AND POLISHING/ PAINTING TO FURNITURE UNDER GE (EAST) JALANDHAR CANTT

Amount

Part-'A' (for Srl No. 2.00 to 14.03)

Part-'A' SOFA SET 5 SEATER (Drg No- FD-1113) (3+1+1) : Material and labour for repair & replacement of the following part of sofa set without disturbing the other component including tightening of frame all as specified, shown on drg and directed:-

Replacement of foam cushion for seat & back of sofa set made of flexi polyurethane foam of 40 density of size 21” x 22” x 100mm thick with tapestry cover (Cost not less than 350/- per Mtr of shade and colour as approved by GE) over a cover of markin cloth of best quality complete (Each Set consisting of 05 Nos Seat cushions & 05 Nos Back cushions). Make of Foam:- Kurlon/Sweet Dream/ Sleepwell

Replacement of wooden arm of sofa set with new 1st class hard wood arm of existing shape & size.

Replacement of wooden batten of sofa set with new 1st class hard wood batten of existing shape & size all as specified.

Replacement of wooden long rail of sofa set (for 3 seater) with new 1st class hard wood long rail of existing shape & size.

Replacement of wooden front/ rear rail with new 1st class hard wood long rail of existing shape & size.

Replacement of wooden side rail of sofa set with new 1st class hard wood short rail of existing shape & size.

Replacement of wooden leg of sofa set with new 1st class hard wood leg of existing shape & size.

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

REPAIR OF CHAIR COMPUTER (Drg No -FD/E6/MAP/01) Material and labour for repair & replacement of the following components of chair computer complete all as directed:-

Removing of worn out/ unserviceable tapestry cloth, foam etc. from seat of chair and providing new tapestry cloth over new polyurethane foam cushion 75mm thick, 40 density and cloth; fixing in shape all as per existing and providing PVC beading as per existing pattern complete. Make of foam: SLEEP WELL/KURLON/SWEET DREAM.

Replacement of worn out/ unserviceable tapestry cloth, foam etc from back of chair and providing new tapestry cloth, over new polyurethane foam cushion 50mm thick 32 density and cloth; fixing in shape all as per existing and providing PVC beading as per existing pattern complete. Make of foam: SLEEP WELL/KURLON/SWEET DREAM.

Replacement of broken/ worn castors wheels and supply and fixing new casters wheels (not less than 50mm Dia).

Replacement of broken arm handles and supply and fixing new arm handle as existing.

Replacement of old unserviceable hydraulic lifting mechanism (spindle) and supply and fixing new lifting mechanism as per existing.

Replacement of locking key of shaft and supply and fixing new locking key as existing.

Replacement of broken PVC base with castor wheels and supply and fixing of new PVC base with castor wheels complete.

BED HARD (MAP) (Drg No-FD/E6/ MAP/08(R) Material and labour for replacement of the following parts without disturbing the other component including tightening of frame all specified, shown on drg and directed:- Note : The work will be executed either at site or at BSO Furniture Yard to avoid the loss of manpower and transportation.

Supply and fixing 12mm thick commercial ply as in bed/ charpoy top as per existing shape & size complete all as specified and directed. Make of Ply: Kitply/ Greenply/ Century/ Duro.

Chair Varandah (Drg No. FD-259 & FD/MAP-II/06) Matrial and labour for cutting and removing of old cane of chair verandah and recanning of chair with cane plastic 4mm half round wide, white in colour complete all as specified and shown on drg and as directed by Engr-in-Charge. Note : The work will be executed either at site or at BSO Furniture Yard to avoid the loss of manpower and transportation.

Removing of existing old worn out/ unserviceable PVC seat and back of verandah chair and providing new PVC seat & back as per drg and as directed by Engineer-in-Charge

Preparation of old surfaces of chair verandah and applying one coat of synthetic enamel paint white complete all as specified and directed by Engineer-in-charge.

CHAIR WRITING CUSHIONED (DRG NO FD-1107) Material and labour for repair/ replacement of the following components of chair writing without disturbing the other component including tightening of frame complete all as specified and directed.

Removing of worn out/ unserviceable tapestry cloth from seat and providing new tapestry cloth with new polyurethane foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete. Make of foam: SLEEP WELL/ KURLON/ SWEET DREAM.

Removing of old worn out/ unserviceable tapestry cloth from back and providing new tapestry cloth over with new polyurethane foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete. Make of foam: SLEEP WELL/ KURLON/ SWEET DREAM.

Replacement of legs & arms handles with new arms handle as existing complete all as specified and directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

CHAIR DINNING JCO/ OR (Drg No. FD/MAP-II/05) Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints all as specified and as shown in drg wrought on all sides including dismantling & removing of all unserviceable legs from the frame complete all as specified.

All as per srl item No 7.00 here-in-before but rear leg

All as per srl item No 7.00 here-in-before but side/back/front rail of seat

All as per srl item No 7.00 here-in-before but stiffener of back

Material and labour for PVC seat size 405mm x 430mm x 440mm, 4mm thick with hole of chair dining with SS screw white/ cream colour all as shown in drawing and as specified incluidng taking down old unserviceable PVC seat complete all as specified and directed. Make : Amco

Polishing old surface with one coat and new surface with two coats of French polish including proper wood filer material and preparation of surface after repairing of items complete all as specified and directed.

TEAPOY VERANDAH MAP (Drg No. FD/E6/MAP/17) Removing unserviceable top and supply and fixing new top made of 18mm thick prelaminated particle board melamine faced ISI marked including teak wood beading all round the table fixed with nails complete all as specified and directed by Engineer-in-charge.

Painting of teapoy varandah steel base after smoothing of surface with one coat of black enamel paint complete all as specified and directed

CHARPOY HARD TOP (Drg No. FD/MAP-II/01) Removing the unserviceable plywood from charpoy MS pipe and tightening complete all as specified

Removing the old welding spots from broken welding joints and re-welding in legs, long rails and short rails of charpoy hard top complete all as specified and directed

Supply and fixing new 12mm thick plywood BWR grade, ISI marked, commercial complete all as specified and directed

CHAIR SCHOOL WITH HAND BOARD (Drg No. FD/E6/MAP/05) Removing the existing unserviceable broken hand board from chair school with hand board and supply and fixing new hand board made out of 18mm thick prelaminated particle board exterior grade duly with PVC lipping complete all as specified and directed

Removing the existing unserviceable broken PVC moulded seat and hand board PLPB 18mm with teak wood beading of chair school with hand board and supply and fixing new PVC moulded seat and hand board complete all as specified and directed

Preparation of surfaces of chair school with hand board and painting with one coat synthetic enamel paint of approved colour complete all as specified and directed

TEAPOY VERANDAH MAP (Drg No. FD-383) Removing unserviceable top and supply and fixing new top made of 18mm thick prelaminated particle board melamine faced ISI marked including teak wood beading all round the table fixed with nails complete all as specified and directed by Engineer-in-charge.

Painting of teapoy steel base after smoothing of surface with one coat of white paint complete all as specified and directed

CHAIR EASY CUSHIONED (Drg No. FD-358) Taking out old unserviceable leg and supply and fixing the front leg of sheesham wood Ist class made to shape , joint fixed with bamboo pins and fevicol by making Tennon Groove joints of sizes and section complete all as specified and as shown in drg wrought on all sides as directed by Engr-in-Charge.

All as per srl item No 12.00 here-in-before but rear leg

All as per srl item No 12.00 here-in-before but arms

Removing of worn out/ unserviceable foam from seat and back of chair easy cushioned and providing new polyurethane foam cushion 75mm thick & 50mm thick, 40 density and fabric fixing in shape on 4mm thick ply all as per existing and as shown on drgs and as per design of existing chair. Make of foam: SLEEP WELL/ KURLON/ SWEET DREAM.

Polishing old surface with one coat and new surface with two coats of French polish including proper wood filer material and preparation of surface after repairing of items complete all as specified and directed.

Chair Dining Cushioned Dwg No FD/E6/MAP-II/02) Material and labour for repair&replacement of the following componenets of chair dining offrs without disturbing the other componenet incl tightening of frame all as specified and shoen on drg

Removing of existing old worn out/unserviceable tapestry cloth,foam,etc from seat of chair and providing new tapestry cloth,over new polyurethene foam cushion 75mm thick,40 density and fixing in shape on 12mm th ply all as per existing and as shown on drg nd as per design of existing chair Make of foam-sleep well/kurlon/sweet dream

Material and labour for repair and replacement of broken wooden leg with 1st class hard wood leg of existing shape &size complete all as specified,shown on dwg and directed.

Material and labour for repair and replacement of broken wooden front/side rail with 1st class hard wood front/side rail of existing shape &size complete all as specified,shown on dwg and directed.

Material and labour for repair and replacement of broken wooden back rail with 1st class hard wood back rail of existing shape &size complete all as specified,shown on dwg and directed.

Material and labour for repair and replacement of broken vertical strips with 1st class hard woodvertical strips of existing shape &size complete all as specified,shown on dwg and directed.

Material and labour for repair and replacement of broken stiffener with 1st class hard wood stiffener of existing shape &size complete all as specified,shown on dwg and directed.

Material and labour for replacement of broken nylon buffer withnew nylon buffer all as specified,shown on dwg and directed.

Polishing old surface with one coat and new surface with two coats of french polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed and as shown on drg.

Chair Writing Steel (DRG NO FD/E6/MAP-12) Material and labour for repair & replacement of the following componenets of chair writing without disturbing the othrer componenet all as specified and shown on drg.

Removing of existing old worn out/unserviceable tapestry cloth from seat and providing new tapestry cloth over with new polyurethene foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete all as directed by Engineer-in-charge.Make of foam:SLEEP WELL/KURLON/SWEET DREAM

Removing of existing old worn out/unserviceable tapestry cloth from back and providing new tapestry cloth over awith new polyurethene foam cushion shall be 50mm thick and shall be moulded with density 50-55 complete all as directed by Engineer-in-charge.Make of foam:SLEEP WELL/KURLON/SWEET DREAM

Removing existing broken arms handles and S&F new arms handle as existing and as directed by enginer-in-charge.

Part-'B' (Trade Pattern Furniture) (for Srl No. 16.00 to 31.03)

PEG TABLE (450X450X400MM) : Material and labour in repair/ replacement of the following components of peg table complete all as directed by Engineer-in-Chrage :-

Removing existing broken/ unserviceable leg of peg table and providing and fixing new leg of sheesham wood complete all as per shape and size and as directed by Engineer-in-Charge

Supply and fixng front/ back/ side rail of sheesham wood all as per existing and as directed by Engineer-in-Charge

Supply and fixng table top of size 450mm x 450mm/ existing size made out of 18mm thick pre-laminated particle board exterior grade malmine faced, ISI marked, edges finished with T.W beading 1.5mm thick all as per existing and as directed by Engineer-in-Charge

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

HARD BED (SIZE 1950 X 900MM) : Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as specified and shown on drg :-

Supply and fixing foot board 400mm hgih made out of 32mm thick commercial block board with 4mm thick veneer ply on both faces having 32 x 6mm tw beading as pe existing shape, size & position and as existing and directed. Make of block board and ply : Kitply/ Greenply/ Century/ Duro

Supply and fixing head board 800mm hgih made out of 32mm thick commercial block board with 4mm thick veneer ply on both faces having 32 x 6mm tw beading as pe existing shape, size & position and as existing and directed. Make of block board and ply : Kitply/ Greenply/ Century/ Duro

Supply and fixing 12mm thick commercial ply as bed top as per existing shape & size and directed by Engineer-in-Charge. Make of block board and ply : Kitply/ Greenply/ Century/ Duro

Supply and fixing 1st class teak wood long rail as per existing shape & size complete all as specified and directed

Supply and fixing 1st class teak wood short rail as per existing shape & size complete all as specified and directed

Supply and fixing 1st class teak wood stiffeners as per existing shape & size complete all as specified and directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

SOFA SET 4/5 SEATER (3+1+1) : Material and labour in repair/ replacement of the following part of sofa set without disturbing the other component including tightening of frame all as specified, shown on drg and directed:-

Material and labour in replacement of existing foam cushion for back of sofa set (5 seater) made of flexi polyurethane foam of 40 density 50mm thick of existing shape and with tapestry cloth (Cost not less than 250/- per Mtr of shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. (In one set= 05 Nos back cushion) Make of Foam:- Kurlon/Sweet Dream/ Sleepwell

Material and labour in replacement of existing foam cushion for seat of sofa set (5 seater) made of flexi polyurethane foam of 40 density 75mm thick with extra padding of 20mm thick polyurethane foam of existing shape and with tapestry cloth (Cost not less than 250/- per Mtr of shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The back cushion frame shall be fixed on existing wooden frame all as existing and directed. (In one set= 05 Nos back cushion) Make of Foam:- Kurlon/Sweet Dream/ Sleepwell

Material and labour in repair/ replacement of wooden arm of sofa set with new teak wood arm of existing shape & size withou disturbing to other component duly french polished complete all as per existing and directed

Material and labour in repair/ replacement of wooden batten of sofa set with new teak wood batten of existing shape & size withou disturbing to other component duly french polished complete all as per existing and directed

Material and labour in repair/ replacement of wooden long rail of sofa set with new M.P teak wood long rail of existing shape & size withou disturbing to other component duly french polished complete all as per existing and directed

Material and labour in repair/ replacement of wooden short rail of sofa set with new M.P teak wood short rail of existing shape & size withou disturbing to other component duly french polished complete all as per existing and directed

Material and labour in repair/ replacement of wooden leg of sofa set with new M.P teak wood leg of existing shape & size withou disturbing to other component duly french polished complete all as per existing and directed

Material and labour in replacement of existing tapestry cloth for seat of sofa set (5 seater) (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The seat frame shall be fixed on existing wooden frame after replacement as tepestry cloth all as existing and directed

Material and labour in replacement of existing tapestry cloth for back of sofa set (5 seater) (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed. The seat frame shall be fixed on existing wooden frame after replacement as tepestry cloth all as existing and directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

TABLE BED SIDE : Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:-

Supply and fixing shelves made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specifiation

Supply and fixing sides made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specifiation

Supply and fixing top made out of PLPB 18/19mm thick exterior grade one side decorative choice and other side balancing white lamination confirming to IS specifiation

Supply and fixing 6mm thick commercial ply BWR for back side all as per existing

Supply and fixing heavy duty channels to drawers as per existing and as directed

Supply and fixing CP handle to drawers as per existing and as directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

SHOW CASE GLAZED (SIZE 1800 X 1200 X 300MM) : Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:-

Removing old broken glass sliding shutter and supply & fixing 5mm thick glass shutter with new aluminium channel all as existing & as directed by Engineering-in-Charge

Polishing with one coat of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

REPAIR TO TABLE DINING 4 PERS : Material and labour in repair/ replacement of the following component of table of size (1200 x 1200 x 750mm) without disturbing the other component including tightening of frame all as per existing and directed:-

Top made of prelaminated particle board 18/19mm thick exterior grade with one side decorative choice lamination and other side balancing white lamination conforming to IS specification duly covered with all round 6mm thick teak wood beading all as existing and directed

Legs made of teak wood as per existing and directed

Long rail made of teak wood as per existing and directed

Side/ short rail mad of TW as per existing and directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

TABLE WRTING (900 X 600 X 750MM) : Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:-

Removing of old unserviceable top of table and supply & fixing of new top of PLPB of size 900 x 600 x 18mm thick exterior grade, edges finished with PVC beading 1.5mm thick as per existing shape and size and directed by Engineer-in-Charge

Removing of old unserviceable drawer and supply & fixing of new drawer with sliding channel all as per existing and directed by Engineer-in-Charge

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

CHAIR DINNING (450 X 450 X 900MM) : Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:-

Supply and fixing triangular teak wood stifferner of size 60x60x25mm (shall provided to strength front of corner of legs) complete all as specified and directed

Supply and fixing top rails made of teak wood all as per existing and directed

Supply and fixing curve shape back made of teak wood all as per existing shape & size and as directed

Supply and fixing stiffners made of teak wood all as per existing shape & size and as directed

Supply and fixing front/ side/ rear rails legs made of teak wood all as per existing shape & size and as directed

Supply and fixing rear legs made of teak wood all as per existing and directed

Supply and fixing front legs made of teak wood all as per existing and directed

Supply and fixing seat made of 12mm thick commercial ply with 50mm thick synthetic foam of 32 density covered with tapestry cover (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as per existing and directed by Engineer-in-Charge. Make of foam : Kurlon/ Sweet dream/ Sleep Well

Supply and fixing tapestry cover (cost not less than Rs. 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as per existing and directed by Engineer-in-Charge

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

COMPUTER TABLE (1200 X 600 X 750MM) : Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:-

Removing of old unserviceable top of table computer and supply & fixing of new top of PLPB of size 1200 x 600 x 19/18mm thick exterior grade, edges finished with PVC beading 1.5mm thick as per existing shape and size and directed by Engineer-in-Charge

Removing of old unservicable key board tray and supply & fixing of new key board with sliding channel all as per existing, and directed by Engineer-in-Charge

Removing of old unservicable drawer and supply & fixing of new drawer with sliding channel all as per existing, and directed by Engineer-in-Charge

CHAIR EAZY WITH CUSHION (TP) : Material and labour in repair/ replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed:-

Material and labour in replacement of existing tapestry cloth for back of chair (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed

Material and labour in replacement of existing tapestry cloth for seat of chair (cost not less than Rs 350/- per mtr, shade and colour as approved by GE) over a cover of markin cloth of best quality complete all as existing and directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

REPAIR OF CHAIR COMPUTER (510x410x800mm) Material and labour for repair & replacement of the following components of chair computer complete all as directed:-

Removing of worn out/ unserviceable tapestry cloth, foam etc. from seat of chair and providing new tapestry cloth over new polyurethane foam cushion 75mm thick, 40 density and cloth; fixing in shape all as per existing and providing PVC beading as per existing pattern complete. Make of foam: SLEEP WELL/KURLON/SWEET DREAM.

Removing of worn out/ unserviceable tapestry cloth, foam etc from back of chair and providing new tapestry cloth, over new polyurethane foam cushion 50mm thick 32 density and cloth; fixing in shape all as per existing and providing PVC beading as per existing pattern complete. Make of foam: SLEEP WELL/KURLON/SWEET DREAM.

Removing of worn out/ unserviceable tapestry cloth of seat and back and providing new tapestry cloth anc cloth fixing to seat & back in shape all as per existing and as directed by Engineer-in-Charge and necessary PVC beading wherever required as per design of existing chair.

Removing of broken/ worn castors wheels and supply and fixing new casters wheels (not less than 50mm Dia) as existing and as directed by Engineer-in-Charge.

Removing of broken arm handles and supply and fixing new arm handle as existing and as directed by Engineer-in-Charge.

Removing of old unserviceable hydraulic lifting mechanism (spindle) and supply and fixing new lifting mechanism as existing and as directed by Engineer-in-Charge.

Removing of locking key of shaft and supply and fixing new locking key as existing and as directed by Engineer-in-Charge.

Replacement of broken PVC base with castor wheels and supply and fixing of new PVC base with castor wheels complete as existing and as directed by Engineer-in-Charge.

ALMIRAH LARGE/ MED STEEL WITH SHELVES (750X430X1266MM) : Material and labour for repair & replacement of the following components of almirah large steel & small with shelves complete all as directed:-

Repair to almirah steel large/ medium with shelves such as removing dents from shuttes, back, top, bottom and sides of almirah, repair and refixing of existing legs by welding, repair and refixing of existing shelves and making it serviceable and applying a coat of red oxide where ever required all as specified and directed

Supply and fixing in replacement 3 way lock, 4 levers with duplicate keys Make : Harrison/ Godrej all as existing, approved and directed by Engineer-in-Charge.

Supply and fixing in replacement of CP handle as per existing pattern and design and all as directed

Material and labour for spray painting to almirah large steel inner and outer surface with one coat of primer paint and synthetic enamel paint olive green including preparation of surface after cleaning dust/ dirt with emery paper complete all as specified and directed

CHARPOY IP HARD TOP (1950 X 960 X 450MM)/ FD 220 : Material and labour in repair & replacement of the following part without disturbing the other component including tightening of frame all as per existing and directed by Engineer-in-Charge.

Supply and fixing 12mm thick commercial ply as top of charpoy as per existing shape & size and as directed by Engineer-in-Charge. Make of ply : Kitply/ Greenply/ Century/ Duro

CHAIR EXECUTIVE HIGH BACK (TP)/ AUDITORIUM CHAIR : Material and labour in repair & replacement of the following component of chair complete all as directed by Engineer-in-Charge.

Removing old broken/ wron castors wheels (not less than 50mm dia) and supply and fixing new casters wheels as existing & as directed by Engineer-in-Charge

Removing existing old unserviceable hydraulic lifting mechanism (spindle) and supply and fixing new lifting mechanism as per existing as directed by Engineer-in-Charge

Removing existing locking key of shaft and supply and fixing new locking key as existing and as directed by Engineer-in-Charge

Removing old broken PVC base with castor wheels and supply & fixing of new PVC base with castor wheels complete as per existing & as directed by Engineer-in-Charge

Removing of existing old worn out/ unserviceable tapestry cover, foam, etc of seat and providing new tapestry cover over new polyurethane foam cushion 2" thick, 40 density all as per existing and as directed by Engineer-in-Charge. Make of foam : Sleepwell/ Kurlon/ Sweet Dream

Removing of existing old worn out/ unserviceable tapestry cover, foam, etc of back and providing new tapestry cover over new polyurethane foam cushion 2" thick, 40 density all as per existing and as directed by Engineer-in-Charge. Make of foam : Sleepwell/ Kurlon/ Sweet Dream

Removing of existing old worn out/ unserviceable tapestry cover of seat and providing new tapestry cover all as per existing and as directed by Engineer-in-Charge.

Removing of existing old worn out/ unserviceable tapestry cover of back and providing new tapestry cover all as per existing and as directed by Engineer-in-Charge.

Removing existing broken arm handles and supply & fixing new arm handle as existing and as directed by Engineer-in-Charge.

LOCKER BED SIDE WOODEN (900 X 500 X 1200MM) : Material and labour in repair & replacement of the following component locker bed side complete all as directed by Engineer-in-Charge.

Removing of old unserviceable top of locker wooden supply & fixing new top of existing dimension

Supply and fixing in replacement of CP handle as per existing pattern and design and all as directed

Polishing old surface with one coat and new surface with two coats of French polish including proper filer material and preparation of surface after repairing of items complete all as specified and directed.

CHAIR CBA TUBULER STEEL AND CBB STEEL (DRG NO. FD-75(M) : Removing the following unserviceable part of chair CBA steel and CBB steel and supply & fixing new one all as specified and directed by Engineer-in-Charge.

Seat & back of shisham wood duly canned as per godrej pattern complete all as specified and directed.

Handle of shisham/ hard wood made to shape as shown in drg and screwed properly in repairs & PVC rubber cap at the top of back of frame complete all as specified and directed.

Painting of frame with one coat of olive green & black enamel paint over the coat complete all as specified and directed

GLOBAL ENGINEERS AND INNOVATORS

om parkash and sons

PACHNANDA BUILDERS