REPAIR/REPLACEMENT OF WIRING AND CONNECTED ITEMS FOR FORT CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

Taking down carefully copper/aluminium point wiring (light,fan,socket or power) of any type and discription complete, including fixture and fitting such as switches, ceiling roses ,pendant, regulators, sockets, light fittings etc, removing of material obtained to store for keeping in safe custody for resuse or for taking credit and making good disturbed surface of walls/floors etc. complete all as specified and directed.

M&L for concealed point wiring in PVC conduit with 1.5 sqmm (nominal area), single core copper conductor including non metallic PVC conduit not less than 20 mm dia, pressed steel terminal boxes (not less than 1.6 mm thick of reqd size,factory made) with 3 mm thick plastic laminated sheets top cover of required colour, painting terminal boxes inside and outside with two coats of block bituminous paint over a coat of red oxide primer complete with all accessories and including, 1.5 sqmm (nominal area) PVC earth wire , connected to earth dolly, drawn in same concealed conduit, making good disturbed surfaces and finished to match with existing surface complete for One light/fan/exhaust fan point controlled by one switch as specified and directed.

All asper item No. 02 above but for One bell point controlled by one switch

All asper item No. 02 above but for One 5 amp socket outlet point on same board

All asper item No. 02 above but for One 5 amp socket outlet point on an independent board

All asper item No. 02 above but for One 15 Amp socket outlet on Independant board with 2.5 sqmm (nominal area) cabe

All asper item No. 02 above but surface point wiring in casing & caping for one light/fan/ 5 amp socket independent/ bell point controlled by one, one way switch

All asper item No. 07 above but for One bell point controlled by one switch

All asper item No. 07 above but for One 5 amp socket outlet point on same board

All asper item No. 07 above but for One 5 amp socket outlet point on an independent board

All asper item No. 07 above but for One 15 Amp socket outlet on Independant board with 2.5 sqmm (nominal area) cabe NOTE for item No. 02&11:- (i) Single core PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable shall only be used (ii) Colour coding as per IS shall be used.

M&L for sub main wiring with 2 runs of 4.0 sq.mm copper conductor cable (for phase, neutral ) and one run as earth continuty wire (green cloour),drawn through in and including 20mm dia rigid PVC conduit medium grade and conduit accessories, concealed in stone / brick masonry walls, roofs, floors etc and connecting terminal ends to DB's, and earth continuity conductor connecting to common earth dolly, and making good disturbed surfaces to match with existing , complete all as specified and directed.

All asper item No. 12 but with 6.0 Sqmm condector cable. NOTE for item No. 12&13:- (i) Two run of submain wiring, one run of earth wire (copper conductor), and one run of PVC conduit with accessories shall be measured as one unit length. (ii) Extra length of cable / wire required for connection to MCBs shall not be measured and the rate quoted per unit shall deemed to be inclusive. (iii) Single core PVC insulated and unsheathed 1100V grade multistranded FRLS grade copper conductor cable shall only be used

S&F switch piano, single pole one way 5 Amps 240 Volt capacity, flush type complete all as specified and directed.

S&F Bell push flush type 5 Amps 240 Volt capacity complete all as specified and directed.

S&F 3 pin 5 Amps socket outlet flush type complete all as specified and directed.

S&F switch piano, single pole one way 15 Amps 240 Volt capacity flush type complete all as specified and directed.

S&F 3 pin 15 Amps socket outlet flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) complete all as specified and directed.

S&F ceiling rose of suitable size of bakelite 240 Volts three terminal complete all as specified and directed.

S&F electric bell ding dong type AC 230 volt 50 Hz single phase single polecomplete all as specified and directed.

S&F stepped socket type electronic fan regulator flush type AC 230 volt 120 W suitable for any type of ceiling fan complete all as specified and directed.

S&F Lamp holder PVC/ Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

S&F in repair Modular switch, single pole one way 6 Amps 240 Volt capacity, one module complete all as specified and directed.

S&F in repair Modular Bell switch, 6 Amps 240 Volt capacity, one module complete all as specified and directed.

S&F in repair Modular 3 pin 6 Amps socket outlet two module complete all as specified and directed.

S&F in repair Modular switch, single pole one way 15 Amps 240 Volt capacity one module complete all as specified and directed.

S&F in repair Modular 3 pin 15 Amps socket outlet flush type multi purpose 2 in 1 type (3 pin 5 Amps and 15 Amps) two module complete all as specified and directed.

S&F in repair Modular type, electronic fan step regulator, 120W, 230 volt , 2 module, suitable for any type of ceiling fan complete all as specified and directed.

S&F in repair Modular White cover plate with frame, 2 module complete all as specified and directed.

S&F in repair Modular White cover plate with frame, 4 module complete all as specified and directed.

S&F in repair Modular White cover plate with frame, 6 module complete all as specified and directed.

S&F in repair Modular White cover plate with frame, 8 module complete all as specified and directed.

S&F in repair Modular metal flush box, 2 module complete all as specified and directed.

S&F in repair Modular metal flush box, 4 module complete all as specified and directed.

S&F in repair Modular metal flush box, 6 module complete all as specified and directed.

S&F recessed mounting adjustable LED downlights 12 W, white powder coated,pressed die cast aluminium housing with high efficiency reflector and spring mounting brackets should be provided for easy installation to the fixture, and in repairs, making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, complete all as specified and directed.

S&F LED tube light fitting 1 x 20 watt, decorative , ultra slim round profile LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and in repairs ,making connection with and including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed.

S&F for aesthetically designed LED linear mirror light fitting 1 x 10 watt, provided with high output PMMA diffuser for glare free light, decorative , environmental friendly , energy efficient complete with all accessories, prewired and making connection and in repairs, including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed.

S&F for LED bulk head light fitting 10 W LED 600 Lumen enclosed in polycarbonate body, weather proof, LED lighting fixture with co extruded polycarbonate body , environmental friendly , energy efficient complete with all accessories, prewired and making connection and in repairs, including 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr, fixed on wall firmly complete all as specified and directed.

S&F building security light LED 35 Watt pressure die casting aluminium body, heat resistant glass, IP 65 protection, inclusive of electronic driver and all accessories, fixing on wall/pole in repairs with and including GI pipe bracket made of GI pipe 25 to 40 mm light grade 1.2 m long bent to shape and ,grouting on wall with necessary MS nuts, bolts and washers and 23/0.0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr complete all as specified and directed.

S&F 36 W 2'' X 2'' CRCA LED deep drawn panel recess mounting luminaire suitable for armstrong/grid/ Pop ceiling complete with separate electronic driver & high brighteness SMD Leds, in repairs complete all as specified and directed .

S&F Post top lentran LED type, 15 W , 230 volts AC outdoor type, IP 65 protection light with impect and corrosion resistant with driver and lamp, making electrical connection with 23/0.0076 flexible copper wire three core, complete all as specified and directed.

S&F Sheet metal enclosure for Double Door DBs TPN, (triple pole & netral) 4 Way, 415 V, IP-43 IK-09 protection, with 200 amps rated bus bar and neutral link complete with incoming/outgoing connection through proper size of lugs and cable glands, in repair, complete all as specified and directed.

S&F Sheet metal enclosure for Double Door DBs SPN (single pole & neutral), 8 way ,240 volts with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, with incoming/outgoing connection through proper size of lugs and cable glands, in repair, complete all as specified and directed

S&F Sheet metal enclosure for Double Door DBs SPN (single pole & neutral), 4 way ,240 volts with IP-43 IK-09 protection complete with appropriate size bus bar and neutral link, with incoming/outgoing connection through proper size of lugs and cable glands, in repair, complete all as specified and directed

S&F MCB, 6 to 32 Amps, SP (single pole), 240 volt , 'C' curve, with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and directed .

S&F MCB, 6 to 32 Amps, SPN (single pole & neutral ), 240 volt , 'C' curve, with rupturing capacity 10 KA , inculding providing thimble for out going cable complete all as specified and directed .

S& F in repair sheet metal enclosure (AC Box), SPN (single pole and neutral) with a two pin and earth plug and socket complete with one MCB, SP (single pole), 240 volt , 'C' curve, with rupturing capacity 10 KA, complete all as specified and directed.

S&F 6 Sqmm twin core ,1100 Volts grade, heavy duty cable with PVC insulated aluminium solid conductor, served with inner seathing of PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 metre apart including 4mm dia GI suspension wire, complete all as specified and directed.

S&F 10 Sqmm twin core ,1100 Volts grade, heavy duty cable with PVC insulated aluminium solid conductor, served with inner seathing of PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 metre apart including 4mm dia GI suspension wire, complete all as specified and directed.

S&F 16 Sqmm twin core ,1100 Volts grade, heavy duty cable with PVC insulated aluminium solid conductor, served with inner seathing of PVC tape and overall PVC sheathed in service connections, suspended by insulating hangers not more than 1 metre apart including 4mm dia GI suspension wire, complete all as specified and directed.

S&F Duranto LED highbay 120W flood light with fin ventilation technology for better thermal management and with cutting edge LED technology , in repairs , connecting with 23/0.0076 flexible copper wire three core , not more than 1.2 mtrg complete all as specified and directed .

S&F Sheet metal enclosure (DB) for MCCBs, Vertical TPN, 4 Way, 415 V with 200 amps rated bus complete with incoming/outgoing connection through proper size of lugs and cable glands complete all as specified and directed.

S&F MCCB TPN 100 Amp, 415 volts 16 KA (Thermal Release Range) inculding providing thimble for out going cable complete all as specified and directed complete all as specified and directed.

S&F in repair wall mounted Distribution Board, factory made of size 600mm x 450mm x 150mm made of MS sheet 2.0 mm thick CRCA sheet with powder coated paint ,dust and vermin proof with front openable door and locking arrangement consisting of following accessories:- i) MCCB 100A, 4 pole 25kA fixed magnetic and thermal release - 01 No ii) 3 phase and neutral bus bar copper LT 440V, 200 A iii) Phase indication lamp LED type R,Y,B

Earthing complete with steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level, connecting to the Galvanized iron earth wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel earthwire protected by provision of GI medium grade pipe 15mm bore including provision of concrete pit made from PCC (1:2:4) type B-1(using 20mm graded stone aggregates) with 17mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 Kg/Sqm) and frame of angle iron 25 x 25 x 6mm with lugs 02 No and with 6mm dia MS bar handle made to shape, GI medium grade 20mm bore pipe for watering perforated at bottom, 1.75 metre long placed on top edge of earth plate, common salt & charcoal filling, test point made out of 17mm x 8mm FI with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 metres, all as per electrical plate No.5 of SSR Part-I connected to earth test point all as specified or indicated including testing on completion complete all as specified and directed.

Aawadh associates

M S G R ENTERPRISES

SHIVAM TRADERS

M/S Garg Sons

RAMESH ENTERPRISES

M/S SS Tarders

PITAMBARI TRADERS