Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹16.5 LAccepted-AOC | L1 | Accepted-AOC Being L-1 | |
| 2 | L2₹17.1 L+₹3,379 (0.20%)Rejected-Finance R O RAWALPORA WANBAL YAIYAL TEH DISTT SRINAGAR J K PIN 190005 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L2 | Rejected-Finance Other than L-1 | |
| 3 | L3₹17.3 L+₹21,494 (1.26%)Rejected-Finance | L3 | Rejected-Finance Other than L-1 | |
| 4 | L4₹17.8 L+₹72,281 (4.22%)Rejected-Finance 25 KASHIPUR KASHIPUR BALLIA UTTAR PRADESH 277001 | BALLIA | UTTAR PRADESH | 277001 | L4 | Rejected-Finance Other than L-1 | |
| 5 | L5₹18.7 L+₹1.6 L (9.34%)Rejected-Finance OLD AIRPORT ROAD W ANBAL SRINAGAR J K 190005 | SRINAGAR | SRINAGAR | JAMMU AND KASHMIR | 190005 | L5 | Rejected-Finance Other than L-1 |
Tender Value
₹22 L
EMD Value
₹44,000
Closing Date
21 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Lt. Col Preetham P GE
GE 970 EWS C/o 56 APO PIN-913970
SPL REPAIR TO BLDG NO P-94 (OR COOK HOUSE) OF WEU AT OAF UNDER GE 970 EWS
2024_MES_650765_1
GE 970 EWS-15/ 2024-25
Open Tender
Civil Works
Item Rate
180 days
OLD AIR FIELD SRINAGAR
AS PER TENDER
7 documents required · 7 mandatory
₹500
GE 970 EWS
₹44,000
Yes
6 Jul 2024
23 Apr 2024
27 May 2024
23 Apr 2024
21 May 2024
8 May 2024
Amount
Taking down chowkats or frames with shutter (without taking off shutter from the frames) n. exc 1.50 Sqm each complete all as specified and directed .
Taking down chowkats or frames with shutter (without taking off shutter from the frames) exc. 1.50 Sqm n.exc 4 Sqm each complete all as specified and directed.
S&F factory made solid PVC door Frame of size 50 mmx47 mm made out of 5mm thick wood grain printed PVC sheet used instead of plain colour PVC sheet & edges will be painted to match with printed sheet reinforced MS square tube supplying & fixing in opening as per specification & drawing complete all as specified and directed.
S&F factory made solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2,4, or 6 raised panel design with 2mm thick Moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specifications and drawing of page no 146 of SSR Part -II complete all as specified and directed.
Material & labour Pressed steel frames (Factory made) made out of 1.25 mm thick black MS sheet for doors, with one or more rebates including necessary s&f lugs, Butt hinges, lock strike plate, etc complete, size of frame 125x60mm incl bottom of each chowkat to be welded with 2 nos 25x25x3mm thick flat iron projecting 10 cm on either side, including filling of void of steel frame with PCC 1:3:6 type C0 (using 12.5mm graded stone aggregetes) complete all as specified and directed.
Description all as item No-05 above but size of frame 105x60mm.
S&F factory made Box Type mild steel windows side hung shutters with chowkets with glazing bars to receive glass or wire guage dovetailed or welded and steel peg stay with and including necessary welding, reveting, tower bolt, hanlde, holdfast & hinges as per Drg No. CESZ/TD-1018/2011 Sheet No 1/3 complete all as specified and directed by Engr-in-Charge. (Note : mensurement of window will be separately for glass window & wire mesh window). Guard bars & angle iron shall be paid separately).
M&L PCC 1:2:4 type B0 12.5mm graded aggregatte as in hold fasts and bed blocks etc including necessary form work complete all as specified and directed by Engr-in-Charge.
S&F mild steel flat iron as in hold fast for door window frames or chowkat etc. cut to length or drilled hole and fixed with screw etc. complete all as directed grade of steel conforming to Fe-290 Gde-E-165
Dismantling wrought iron or mild steel work (used in framework for stageing of water tank) of any description not otherwise provided for all as specified.
S&F mild steel Fe 410-W Qty as in joist, channel, angle or tee sections fixed independently without connecting plates etc all as specified and directed.
S&F 1.00 mm thick plain, black mild steel sheeting in stepped flashings (measured as the minimum rectangle from which the pieces can be cut) all as specified and directed.
M&L PCC (1:2:4) B-2 (40 mm graded) in foundation, filling and mass concrete for fixing of angle iron work inccluding necessary form work and allied work complete all as specified and directed .
S&F 35 mm thick, factory made 2nd class hardwood glazed and skeleton shutters, open rebated and prepare to receive gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for secruing glass/gauge etc size of member of shutter as specified in SSR Part-I Section 8 Clause 8.20(a), fitted to chowkats complete all as directed.
S&F 35mm factory made shutters plain framed, panelled shutter with lock rail and panel of 9 mm BWP commercial ply or 12 mm to 15mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS-1003 (Part - I) kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-Charge.
S & F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.
S&F sheet glass 4.00 mm thick ordinary quality and glazing with oil putty in square, rectangle n.exc 0.5 Sqm in each pan all as specified and as directed.
S&F in replacement sheet glass 5.50 mm thick ordinary quality and glazing with oil putty in square, rectangle exc 0.5 Sqm in each pan all as specified and as directed.
S&F figured glass 4.00 mm thick, pin head type and glazing with oil putty in squares, rectangle exceeding 0.5 Sqm in each pane complete all as specified and as directed.
S&F Floor door stopper of aluminum alloy body and tongue anodized with hard drawn steel spring fixed in floor of length 150mm complete all as specified and directed.
S&F mild steel 300mm, ordinary rat rail rod pattern springs, including roller and roller plate complete all as specified and directed.
S&F Stainless Steel butt hinges medium weight of size 100 mm fixed with stainless screws complete all as specified and directed Engr-in-Charge.
S&F 125 mm butt hinges medium weight cold rolled mild steel and fixed with screws or weld to steel frame complete all as specified and directed.
S&F 200mm size aluminium anodised, barrel tower bolt of extruded section complete all as specified and directed.
S&F 250 mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified directed.
S&F Continuous (piano) hinges, Width of flaps (when open) in 30mm, mild steel, bright finish or electrogalvanised complete all as specified and directed .
S&F Extruded aluminium alloy handles 150 mm long fabricated type anodised complete all as specified and directed .
S&F in repairs 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in shelves, partition and lineing with and including stainless steel cleats 02 number each side complete all as specified and directed.
S&F 18/19 mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work as in cupbords shutters complete all as specified and directed.
S&F 0.9mm thick decorative laminate type-1, of surface finish, colour and pattern as approved fixed with approved adhesive as per marker's instructions complete all as specified and directed.
M&L for second class hardwood plain fillets in square, rectangular or triangular in section, clean sawn, secured with nails or borads exc 3 Sq.cm & n.exc 6 Sq.cm with and including two coat of french polish complete all as specified and directed.
S&F hasp and staple safety type 100 mm size, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.
S&F in repair 25mm dia Curtain rod or Harrison rails, mild steel chromium plated with fancy brackets,dome, stops, rollers etc. complete all as specified and as directed.
Dismantiling timber scantling 40 sqcm and over insection in any position for framed work all as specified and directed.
S&F for 2nd class hardwood (wrought) in scantling for timber frame and fixed complete all as specified and directed.
Refixing of timber scantling obtained from dismantling complete all as specified and directed.
M&L preparation of new / old or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
M&L two coats of synthetic enamel paint over a coat of red oxide primer after preparation of new steel surfaces of any description over 10cm in width and girth complete all as specified and directed.
M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosoting complete all as specified and directed.
Demolition of unreinforced cement concrete in ground floors and paving n. exc 15cm thickness (below or above ground level) complete all as specified and directed.
Demolition of unreinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed.
M&L for 75mm thick (1:3:6) Type-C-2 (using 40mm graded crushed stone aggregate) as in plinth protection or paving, finishing cement concrerte surface even and smooth without using extra cement complete all as specified and directed.
M&L for 75mm thick PCC (1:4:8) type-D2 (using 40mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
M&L for 25mm thick (1:2:4) Type-B-0 (using 12.5mm graded crushed stone aggregate) as in sub base of flooring complete all as specified and directed.
Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, dry complete all as specified and directed.
M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.34 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.
M&L for Kota stone slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in10mm thick CM (1:4) to receive Kota Stone complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
M&L non skid coloured designer ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed.
Description all as per item No.49 above but on skirting over with and including 10mm thick rendering /backing coat in CM 1:4 complete all as specified and directed.
M&L anti skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with and including 15mm thick screed bed in CM (1:6) compete all as specified and directed.
M&L glazed ceramic coloured, designer & pattern (dark & light shade combination) tiles in 350x250x7 or 450x350x7 or 450 x 300 x 7-8 mm thick on vertical surfaces such as dado etc set and jointed in neat cement slurry and pointed in white or colour cement to match over with and including 10mm thick backing coat in CM 1:4 and dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L Granite (of any type) tiles, 18-20 mm thick machine cut laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the granite stone including cutting and polishing with and including 20mm thick screed bed or bedding in cement mortar 1:4 and including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Engr-in-Charge.
M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed.
M&L RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in slab supported on wall, landings balconies, canopies, deck slabs and shelves etc complete all as specified and directed
S & F mild steel TMT bar 10 mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and as directed.
M&L for precast RCC 1:2:4 Type-B1 (using 20mm graded crushed stone aggregate) as in manhole and drain cover slab and similar article with plain faces, set in cement 1:4 complete all as specified and directed by Engr-in-Charge.
M&L GI tubing as in spout pipe light grade 32mm bore including of required shape all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete with and including taking down cement or lime plaster of any description from stone /brick/concrete wall etc incl raking out joints hacking for key scrurbbing down with water and disposing of the rubbish complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete with and including taking down cement or lime plaster or racking of pointing and scrubbing out existing finishes on wall of any for three storey bldg incl all necessary arrangement like scaffolding and masonry complete all as specified and directed by Engr-in-Charge.
M&L brick work with sub class 'B' bricks straight or curved in plan exc 6 mtr mean radius built in CM (1:6) using old size bricks with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 with and including demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:6 on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M&L rendering 15 mm thick in CM 1:4 with and including mixing of liquid WPC of approved make @ 200ml per bag of cement on brick/concrete/stone wall surfaces of any description, and finishing the surfaces even and fair complete complete all as specified and directed.
M&L for preparing new/old plastered or unplastered surfaces on walls & other surface and applying two coats of oil emulsion distemper over a coat of 3 mm wall care putty with rubbing or smoothing of surface upto ture finish over a coat of water base primer complete all as specified and directed.
M&L preparing new/old plastered surface of walls and applying two coats of cement based paint over a coat of cement base primer complete all as specified and directed complete all as specified and directed.
M&L three coats of white wash on new/old plastered surfaces of ceiling including preparation of surfacces complete all as specified and directed.
S&F for pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws complete with and including dismantling existing corrugated steel sheeting, any gauge, thickness, including nainital or similar roof coverings complete all as specified and directed.completed all as specified and directed.
M & L for factory made coloured glazed chequered cement concrete tiles with grey cement and no pigment of size 30cm x 30cm and 25mm thick ,machine pressed; set jointed and pointed in neat cement slurry in floors, laid over and including 20mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and as directed.
S&F for pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550mpa as in roof covering /cladding to wall, fixed with self tapping screws as in ridge,eaves boards, hips, velly gutter drip and straight flushing of reuired machine moulded shape and size complete with and including dismantling plain steel sheeting, any gauge, thickness, including nainital or similar roof coverings and eaves boards of any description complete all as specified and directed.completed all as specified and directed by Engr-in-Charge.
M&L for Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and directed by Engr-in-Charge.
S&F 15 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.
S&F 20 mm dia steel water GI tube medium grade with all fittings and fixed with walls, ceilings or laid in floors complete with and including taking up or down 20 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.
M&L Lagging to pipes used in internal water supply (internal dia of pipe 20mm) or plumbing all round with,25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842 all as specified and directed by the Engr-in-Charge.
Re-fixing old 15mm dia steel water GI tube medium grade with all fittigs / connection in new or old position and fixed with concealed to walls, ceilings or laid in floors complete with and including taking up or down 15 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.
Re-fixing old 20mm dia steel water GI tube medium grade with all fittigs / connection in new or old position and fixed with concealed to walls, ceilings or laid in floors complete with and including taking up or down 20 mm bore steel water tubing and connections complete all as specified and directed by Engr-in-Charge.
S&F in repair Vitrous china wash hand basin, oval shape counter top of size 550 x 400 mm white fixed to RCC counter with and, 32mm dia PTMT waste coupling and 32mm dia PVC waste pipe 90cm long etc inlet and outlet connection complete all as specified and directed by Engr-in-Charge.
S&F in repair vitreous China, squatting pan, Orissa Pattern, size 630 x 450 mm white, with integral foot rests (excluding flushing cistern and flush pipe) with CI trap of suitable size ( P or S type) including connection to trap and to flushing pipe, anti syphonic pipe etc complete including provision of lime concrete bedding & making good to floor complete complete all as specified and directed including taking out old one.
S&F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white, with inlet, ball valve, float and handle including PVC flush pipe and brackets complete fixed in wall and floor to trap of WC as required and as directed.
S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including PTMT waste copupling & waste pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm dia CP Wall Mixer Telephonic with Crutch (Provision for hand shower) and complete set of hand shower complete all as specified and directed.
S&F in repair 15 mm dia CP Central Hole Basin Mixer without Pop-up waste system complete all as specified and directed.
S&F in repair 15 mm dia CP Sink Mixer with regular spout (W/M) complete all as specified and directed.
S&F in repair 15 mm bib tap ( fancy type) , cast copper alloy chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
S&F in repair CP angle valves (half turn type) conclead type (chromium plated fancy type) 15 mm dia, cast copper alloy, screwed down, high pressure with crutch or butterfly handles, screwed both end for iron pipe or for unions complete all as specified and directed.
S&F in repair Stop valves of size 20mm dia (half turn type) , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed including taking down old one.
S&F in repair single/multi PVC (SWR) floor trap 75mm to 110mm dia, palin with grating including joining to waster pipe, fixed in cement concrete type B-1 (1:2:4) using 20mm graded broken stone aggregate complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm dia PVC connections, 600 mm long with PTMT nuts of suitable size at two end complete all as specified and directed including taking out old one.
S&Fin repair towel rail 600 mm long of PTMT fixed with and incl Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190 gms).
S&F in replacement Corner glass shelves fancy type 300mm size, complete all as specified and directed.
S&F in replacement Stainless steel kitchen dish rack of size of 900 x900 x 250mm complete all as specified and as directed. Note: weight should not be less than 4.00 kg
S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes all as specified and as directed
S&F 75 in repair mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls/floors with necessary MS clamps including taking down old pipes all as specified and as directed
S&F 110 mm PVC (SWR) access door bends any radius including taking down old all as specified and as directed
S&F 75 mm PVC (SWR) access door bends any radius including taking down old all as specified and as directed
S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge.
S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed by Engr-in-Charge.
S&F 110mm PVC (SWR) vent cowl complete all as specified and directed by Engr-in-Charge.
S&F rotational moulded polythene water storage tank 1000 ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I with and including dismantling water tank of capacity exceeding 500 liters but not excedding 1000 Ltrs and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule & nipple suitable for HDPE water tank (Min weight 15mm-38 gms/20mm-45gms/25mm-65gms) complete, all as specified and directed by Engr -in-Charge.
Taking down carefully unsv/damaged copper/aluminium surface (batten/coduit or casing caping) point wiring any length for light/fan/socket or power including unscrewing from board (fitting and fixture such as switches, sockets, ceiling rose, lamp holders, brackets, pendent, regulators, sockets, Bracket /sketch fitting etc) and removing material from site and making good to the disturbed surface to match with existing finish etc complete all as specified and directed.
Taking down unserviceable any type of copper/aluminium sub main wiring of any size/core/type complete including conduit/casing caping etc removing the debris and making good complete all as specified and as directed.
M & L for one point wiring with PVC insulated un-sheathed cable with stranded copper conductor FR-LS conforming to IS : 694 of size 1.5 Sq mm single core, including one No. 1.5 Sq mm single core PVC insulated un-sheathed copper cable FR-LS as continuous earth wire drawn in and including Non metallic rigid PVC Conduit not less than 20 mm dia as per ground requirement with all accessories of same grade fixed on wall/ceiling including terminated in to Cast iron/pressed steel terminal box of required size made out of 2mm thick MS sheet duly painted both sides or PVC box ISI marked with 3 mm thick plastic laminated sheet top cover fixed with brass screw & cup washers for mounting switches, fan regulators etc for one light/fan/exhaust fan point controlled by one 5 Amp switch one way complete all as specified and as directed
All as per Srl item No. 104 above but for one ceiling/exhaust fan/call bell point point complete all as specified and directed.
All as per the item no 104 above but 3 pin 15Amp socket outlet by using 4 sqmm wire on indipendant board with other all as specified and directed by Engr-in-charge.
All as per the item no 104 above but 3 pin 5 Amp socket outlet by using 2.5 sqmm wire on indipendant board with other all as specified and directed by Engr-in-charge.
All as per the item no 104 above but 3/5 pin 5 Amp socket outlet on indipendant board with other all as specified and directed by Engr-in-charge.
All as per the item no 104 above but 3/5 pin 5 Amp socket outlet ons ame board with other all as specified and directed by Engr-in-charge.
M & L for sub main wiring with two runs of single core 4 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing caping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 4 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as specified and directed.
M & L for sub main wiring with two runs of single core 4 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including non- metallic rigid PVC casing caping (double interlock type) of suitable width medium duty with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as directed.
M & L for sub main wiring with two runs of single core 4 Sqm, FRLS Copper conductor PVC insulated unsheathed cable as per IS 694-1990 (third revision) drawn through & including Non metallic rigid PVC Conduit not less than 20 mm dia with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 2.5 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board/ distribution board and testing on completion etc complete all as specified and directed. (Note for BOQ item No 114 to 115 :- Two runs of cable, one run of earth continuity conductor and one run of PVC casing caping/conduit shall be measred as one unit)
S & F Switch Piano flush button single pole one way 5 A , 240 V complete all as specified and as directed
S&F Switch Socket Combination 5A/16A, 5 in 1, 3 pin, 240 volts complete all as specified and as directed
S&F Switch Socket Combination 5A, 2 in 1, 5 pin, 240 volts complete all as specified and as directed
S&F Ceiling rose, surface bakelite, 65 x 50 mm two/ three terminals 240 volts complete all as specified and as directed
S & F MCB DB TPN 4 way, 230 Volt with 63 A rated bus bar double door type modular type complete all as specified and as directed.
S & F MCCB TPN 200 Amps, 415 Volt , B curve, with 10KA complete all as specified and as directed.
S & F MCB DB TPN 8 way, 230 Volt with 200 A rated bus bar double door type modular type complete all as specified and as directed.
S & F MCB SPN 32/ 40 Amps 230 volts 'C' curve, 50 HZ AC 10 KA complete all as specified and directed.
S & F MCB SP 06 to 32 amps 230 volts C curve, 50 HZ AC 10 KA complete all as specified and directed.
Supply and fix energy efficient surface Mounted LED Luminire 22 watts 4' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed.
Supply and fix energy efficient surface Mounted LED Luminire 1x18 watts 2' long, with acrylic cover complete with all accessories incl necessary two core copper wire for connection from ceiling rose to connector of approx length 0.75 mtr all as directed.
S&F LED lamp 1x 9 /11 watts suitabe for batten/angle hoder complete all as specified and directed.
S & F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.
S & F batten hoder/angle holder suitabe for fxing 9/11 watt LED bub complete all as specified and directed.
Material & labour for Earthing complete with GI earth plate 60x60cmx6mm thick, burried directly in ground (Earth pit not less then 2.25 metres deep below ground level) with top edge of the plate not less then 1.5 metre below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron as earthing lead or steel all as shown in electrical plate No.3 and incl earth work, PCC pit and RCC cover, watering pipe 20mm dia medium grade, funnel, wiremesh, charcoal dust, 15 mm dia medium grade protection pipe and salt etc and connected to earthing test point incl necessary earth work, testing, complete all as specified and directed.
Supply , laying and testing 1100 volt grade XLPE insulated heavy duty cable, 70 sqmm 3.5 core, strip armoured with aluminium stranded conductor overall PVC sheathed laid in trenches complete all as specified and directed.
Excavating in trenches, not exceeding 1.5m wide and not exceeding 1.5m in depth; for laying of cable and getting out in any type of soil, complete all as specified and as directed .
Returning and filling in soil incl levelling, watering and well ramming in layers not exceeding 25cm , complete all as specified and as directed .
Removing excavated soil to a dist not exceeding 50m and depositing where directed at a level not exceeding1.5m above the starting point, complete all as specified and as directed .
M&L Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed.. Note :- For payment purpose punned thickness shall be measured.
M&L for brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.
S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends class -1 ISI marked of size 50 mm bore incl cutting and connecting up with existing line by using socets bend etc for iron pipe and fixed all as specified complete all as specified and as directed.
Supply and laying GI pipe medium class 50mm bore in trenches, floor incl fitting complete all as specified and directed.
M&L for opening the unserviceable/burnt ceiling fan 1200/1400 mm sweep and cutting of old burnt copper winding and rewinding the same with super enamelled copper winding wire of suitable gauge including insulating material such as paper cotton sleeves, varnish, reassembling replacement of 2.5 mfd capacitor, painting testing, bushes, bearing and connecting for satisfactory run, complete all as specified and directed (NOTE:- Taking down/dismantling of ceiling fan and refixing after repair shall deemed to be include in this unit rate.)
Description all as item No 136 above but exhaust fan of size 200/ 240/ 300 mm sweep.
M/S LATIF AHMAD BABA CONSTRUCTION
MEGA CONCRETE CONSTRUCTION ENGINEERS AND CONTRACTORS
M/S Thakur & Sons
M/s Bashir Enterprises
M/S GHULAM HASSAN KUCHAY
FIRDOUS AHMAD BABA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .