Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.8 L+₹1.5 L (7.94%)Rejected-Finance JAISALMER | JAISALMER | RAJASTHAN | 342310 | L2 | Rejected-Finance Not lowest bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
21 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jaisalmer
GE (AF) Jaisalmer
Repair/Maint of Joinery and Other B/R Services in Tech Area at AF Stn Jaisalmer
2022_MES_526502_1
8822/GE/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE (AF) Jaisalmer
As per tender documents
7 documents required · 7 mandatory
₹500
Yes
GE (AF) Jaisalmer
₹40,000
Yes
24 Jun 2022
26 May 2022
23 Jun 2022
26 May 2022
21 Jun 2022
8 Jun 2022
27 May 2022 - 4 Jun 2022
Amount
Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area not exceeding 1.5 Sqm each complete all as specified.
Taking down chowkhats or frame with shutters (without taking off shutters from the frames), area exceeding 1.50 sqm but not exceeding 4.00 sqm each complete all as specified and directed.
Taking down shutters any description area not exceeding 1.00 sqm each complete all as specified and directed.
Taking down shutters any description area exceeding 1.00 sqm each but not exceeding 2.00 sqm each complete all as specified and directed.
Refixing old shutter in the same opening area not exceeding 1.00 sqm each obtained item No. 3.00 here-in-before complete all as specified and directed.
Refixing old shutter in the same opening area exceeding 1.00 sqm each and not exceeding 2.00 sqm each obtained item No. 3.00 here-in-before complete all as specified and directed.
Mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete of Gde E-165 (Fe-290), drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastening and fixing in position including taking down complete all as specified and directed. Note : Cost of welding butt hinges to the door frame deemed to included in quoted rate and butt hinges shall be measured & paid for “Supply only” separately under relevant item of this schedule.
Factory made 30mm thick flush shutter, solid core construction, with block boards core and plywood face panels, commercial type on both sides (ISI Marked) fixed to chowkhats complete all as specified and directed.
Wood grain printed 1mm PVC sheet fixed or laid on to flush doors by using rubber based adhesive, supplying & fixing at site as per specification complete all as specified and directed.
Factory made Second class hard wood 30mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers, edges of framing plain, chamfered or founded, fitted with cut and mitred beads for securing glass or wire cloth any number, etc sizes of members of shutter as specified in SSR Part-I.
Stainless steel wire cloth 0.56mm nominal dia of wire and average width or aperrture 1.18mm and fixed with tinned tackles or stainless steel wire staples fixed complete all as specified and directed.
Stainless steel wire cloth 0.56mm nominal dia of wire and average width or aperrture 1.18mm and fixed with tinned tackles or stainless steel wire staples and fixed as in repair complete all as specified and directed.
Anodised aluminium extruded sections as in frames for chowkats, doors, windows and ventilator with style and rails or for fixed glazed partitions wall frame made to shape required fixed with 150mm long screw and rawl plug with one or more rebates including necessary joining cleats, glazing clips, rubber neoprene packing for fixing, anodised aluminium snap beading screws etc complete all as specified and directed.
Anodised aluminium sections for door shutters (aluminium sections weighing 0.55 Kg/m) including necessary joining cleats, glazing clips, rubber neoprene packing, extruded anodised aluminium handle 02 Nos in each door shutter, 04 Nos hinges each shutter, anodised aluminium snap beading, screws etc complete all as specified and directed.
Anodized aluminium sections as in window and ventilator shutters, side hung type without sash bars (aluminium sections weighing 0.55 kg/m) including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (01 Nos each shutter), extruded anodised aluminium alloy with galvanised mild steel hinge pin, 100mm long (03 Nos each shutter), extruded anodised handle of size 150mm (01 No. each shutter) etc. complete all as specified and as directed.
PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube 19mmx19mmx19 gauge and PDM rubber gasket weather seal to be provided through out the frame. The profile shall be mitre cut at two corners and jointed by inserting 02 Nos of 150mm long brackets of 15mmx15mmx15 gauge MS square tube inside the 19mmx15mm MS square tube and suitable screwed complete all as specified and directed.
Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for stiles and for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC profile ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement complete all as specified.
Mild steel flat as in hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
Plain cement concrete (1:3:6) type C-1 (using 20mm graded stone aggregate) as in cill, step for inserting hold fast of doors and window complete all as specified and directed.
100mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) complete all as specified and directed.
250mm long aluminium type sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
300mm long aluminium type sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia with and including minimum 06 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.
Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851-1000mm in width & weight between 61 to 80 Kg, complete all as specified and directed.
150mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
100mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and directed.
Aluminium handle 125mm long cast type, anodized complete all as specified and directed
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and directed.
Hacking out old broken glasses any thickness, size, quality or description from wooden/metal frames including punching or drilling out old glazing pins / spring clips and providing and fixing new ones, hacking and bldg height complete all as specified and directed.
4mm thick figured glass, pin head type and glazing with oil putty/wooden beading not exceeding 0.50m sqm in each pane fixed any bldg height complete all as specified and directed.
3mm thick sheet glass ordinary quality and glazing with oil putty/aluminium beading not exceeding 0.50 sqm in each pane fixed complete all as specified and directed.
100mm Butt hinges, medium weight, cold rolled mild steel (ISI marked) and fixed as in repair complete all as specified and directed.
Preparation of newly surfaces of wood or wood based material of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint over a coat of pink primer complete all as specified and directed.
Prepariation of newly steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
Welding in repairs not exceeding 2.5cm in length, thickness of metal to be welded not exceeding 6mm complete all as specified and directed.
Easing and adjusting of steel window/ventilators including removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.
Easing and adjusting of aluminium window including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as specified and directed.
Easing and adjusting of aluminium door including necessary joining cleats, glazing clips, rubber packing and anodised aluminium snap beading, screws, anodised aluminium fittings fixing aluminium bedding, rubber beding removing rusted and forging materials and replacing broken hinges including fixing necessary aluminium flat and aluminium angle complete all as specified and directed.
Easing and adjusting of steel doors including removing rusted and forging materials and replacing broken hinges including welding and all labour complete all as specified and directed.
Easing and door shutters for easy closing / opening tightening of hinges or changing the position of hinges adjustment of tower bolts, sliding bolts with new screws complete all as specified and directed.
Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm and fixed as in repair complete all as specified and directed.
Aluminium extruded section body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851-1000mm in width & weight between 61 to 80 Kg, fixed as in repair complete all as specified and directed.
150mm long MS tower bolts stove enamelled black with bright bolt and fixed as in repair complete all as specified and directed.
150mm long aluminium anodised barrel tower bolts of extruded section and fixed as in repair complete all as specified and directed.
250mm long mild steel sliding door bolts clip type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum 06 bolts and nuts, four on bolt plate and two on staple plate and fixed as in repair complete all as specified and directed.
250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed as in repair complete all as specified and directed.
MS handle 125mm long fixed as in repair complete all as specified and directed.
Aluminium handle 125mm long cast type, anodized fixed as in repair complete all as specified and directed
Plain aluminium sheet 0.56mm thick fixed with screw and fixed as in repair complete all as specified and directed
Taking down cement plaster of any description on brick or stone walls or concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
Squared rubble walling, Jodhpur type regular coursed, well bonded, bedded and solidly hearted, built in cement mortar (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar complete as specified and directed.
All as per serial item No. 50.00 here-in-before but except stone complete all as specified and directed.
Extra over stone walling for hammer dressing with maximum dipression on face from sraight edge held against the dresses surface n exc 20mm and dressing of face beds and joints as specified to square rubble walling, jodhpur type, brought upto courses complete all as specified and directed.
Keyed pointing in cement and sand mortar (1:4) to square rubble masonry coursed or brought upto courses etc complete all as specified and directed.
Precast cement concrete (1:3:6), type C-1 (using 20mm graded stone aggregate) as solid block masonary exceeding 10cm and set in cement and sand mortar (1:6) including demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc. complete all as specified and directed.
20mm thick black granite slab/ tiles as in floors/treads etc, set & jointed with neat cement slurry over and including 15mm thick screed bed in cement mortar (1:6) and pointed with white cement with admixture of pigment to match with shade of Granite stone including cutting, grinding and polishing (mirror polish i.e. full granite polish as per local trade practice) including taking down existing complete all as specified and as directed.
20mm thick black granite (of any type) work as in skirting/risers over and including 10mm thick screed bed (backing coat) in cement and sand mortar 1:4, jointed with grey cement slurry and pointed with white cement with admixture of pigment to match with shade of granite stone including cutting and polishing (mirror polish i.e. full granite polish as per local trade practice) including taking down existing complete all as specified & directed.
10mm thick plaster in cement and sand mortar (1:6) on fair faces of brick/stone masonry or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
5mm thick plaster in cement mortar (1:3) on surfaces of ceiling, finished even and smooth without using extra cement complete all as specified and directed.
Preparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant primer of surfaces of wall and approved by GE complete all as specified and directed.
Preparation of newly plastered surfaces or unplastered surfase of walls and applying two coats of oil emulsion distemper over a coat of chalk whitening complete all as specified and directed.
Preparation of newly plastered or unplastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed.
Coloured glazed ceramic tiles 300mm x 200mm x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over including 10mm thick screed bed in cement and sand mortar (1:4) including dismantling floor, hearth or wall tiling cement mortar bedding complete all as specified and directed.
Coloured Non Skid ceramic tiles 7 to 8mm thick (square /rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match including dismantling floor, hearth or wall tiling cement mortar bedding complete all as specified and directed
Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match including dismantling floor, hearth or wall tiling cement mortar bedding complete all as specified and directed.
Coloured Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc over 15mm thick in cement and mortar (1:6) bedding set and jointed in neat cement slurry and pointed in coloured cement to match including dismantling floor, hearth or wall tiling cement mortar bedding complete all as specified and directed
Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved), area of each tile not exceeding 0.36 sqm, as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over including 15mm thick screed bed in cement and sand mortar 1:6 and including dismantling floor, hearth or wall tiling cement mortar bedding complete all as specified
Vitrified ceramic tiles 10mm thick (square/rectangular), polished, coloured (light shade as approved) not exceeding 0.36 sqm on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10mm thick screed bed in cement & sand mortar 1:4 including dismantling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed
Anodized aluminium snap grid frame work for false ceiling as per manufacturer's instructions with hangers from RCC soffit/steel trusses with 6mm dia GI rod (upto 1200mm length) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia 40mm long with including exposed metal frame ceiling with 12mm thick perforated particle board/tiles for insulation and accoustic purposes, 600mmx 600mm in size, fixed with screws to timber frame work or with staples on snap grid in ceiling, flat or sloping and including dismantling and taking down old unserviceable ceiling board complete all as specified and directed.
Hydraulic type capsule door closer (iron body), perfect hydrolic type, space for door shutters fixed as in repair complete all as specified and directed.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .