ADDN ALTN TO MT SECTION INFRASTRUCTURE AT AF STATION CHAKERI KANPUR

Amount

Surface dressing n exc 15 cm deep in soft loose soil and removing the same complete all as specified and directed.

Surface excavation n exc 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation over area n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed

All as per item No 3.00 but exc 1.5 m but n.exc 3 m depth

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exc 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

M & L for plain cement concrete, 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed..

M & L for plain cement concrete, 1:3:6 type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed..

M & L for use and waste of formwork to sides of concrete foundation, footing, bases of columns, raft & raft beams, sides and soffits (if any) of foundation and plinth beams; and similar works; in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exc. 200 mm thick horizontal or slopping in rough finished flat surface of concrete complete all as specified and directed.

M & L for use & waste of formwork to Chhajja, trough and similar items complete all as specified and directed.

M & L for use & waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs etc. also splayes between floors and beams in rough finished flat surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions in rough finished surface of concrete complete all as specified and directed.

M & L for use and waste of formwork to edges of concrete flats, treads, breaks in floor, window cills, concrete railing, opening in concrete wall, sides of RCC slab, RCC / PCC bends in walls or similar work thickness exc. 20 cm in rough finished surfaces of concrete complete all as specified and directed.

M & L for use & waste of formwork to wall, retaining wall, basement walls, ballast walls and the like complete all as specified and directed.

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in foundation including rafts, footing, foundation beams, plinth beams, bases for columns, basement slabs, under-reamed piles and mass concrete complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and like complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M&Lfor providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in Chhajjas complete all as directed

M&Lfor providing reinforced cement concrete M-25 Design Mix using 20mm graded aggregate as in beams, cantilevers, bressmummers, lintels over 1.5 m span complete all as directed

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in columns, pillars, piers, posps and struts complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for providing reinforced cement concrete M-25 Design Mix using 20 mm graded stone aggregate as in wall, retaining wall, basement walls, ballast walls and the like any thickness complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately under respective item)

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

All as per item No 21.00 but 6 to 8 mm dia

M & L for mild steel TMT bars 5 mm dia and over upto and including 10 mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Returning and filling in including spreading and levelling watering and well and ramming in layers not exc 25 cm complete all as specified and directed.

Removing excavated soil not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr from the starting point complete all as specified and directed.

M & L Brick work with Fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed.

M & L Brick work with Fly ash bricks, straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed.

M & L for brick work with Fly ash bricks, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:4 complete all as specified and directed.

M & L for brick work with Fly ash bricks, straight or curved on plan to any radius in one brick thick honey comb wall built in cement mortar 1:4 complete all as specified and directed.

M & L Rendering 15mm thick in cement mortar 1:6 on fair faces of brick/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in CM (1:4) and finished even and smooth (without using extra lime or cement) mixed with WPC @ 2% by weight of cement complete all as specified and directed.

M & L Rendering 5mm thick in cement mortar 1:3 on concrete surfacves/chajja/ceiling, etc finished even and smooth without using extra cement complete all as specified and directed.

M & L Preparing new plastered surfaces of wall and applying three coats of white wash etc complete all as specified and directed.

M&L for preparation of newly plastered surface of wall applying two coats of oil bound distemper on wall over a coat of primer over and including 1 mm thick wall care Putty on prepared surfaces including, rubbing with sand paper complete all as specified and directed.

M&L for two coats of Exterior emulsion paint on newly plastered surfaces over a coat of primer including preparation of surface complete all as specified and as directed .

M & L preparation of new wooden surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 9-10mm thick Light shade vitrified double charged ceramic tiles in floors, not exceeding 0.36 sqm each tile, set & jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:4 complete all as specified & directed.

M & L for Non skid joint free ceramic colour tiles (square / rectangular) of 7 to 8mm thick, area of each tile exceeding 0.11 sqm but not exc. 0.18sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15 mm thick screed bed (1:6) complete all as specified and directed.

M&L for 9-10mm thick Light shade vitrified double charged, polished ceramic tiles in dado/skirting, not exceeding 0.36 sqm each tile, set & jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick backing coat in cement mortar 1:4 complete all as specified & directed.

M & L for 450x300 x7 mm thick glazed ceramic tiles (Digital pattern) colored as in dado/ skirting and vertical serfaces set&jointed in neat cement slurry and pointed in colored cement 0ver and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern of tiles complete all as specified and directed.

M & L for providing cement concrete 1:1.5:3 type A-1 using 20 mm graded stone aggregate as on Ramp complete all as specified and directed.

S&F for 1.25 mm thick pressed steel frames for doors with one/more rebated incl necessary fixing lugs, hinges, lock strike plate etc complete size 125x60mm and filling with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in back of chowkats complete all as specified.

Solid PVC door frame of size 50mm x47mm made out of 5mm plain clour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F flush shutter, 35 mm thick, solid core construction with block board core, and ply wood face panels but both face is covered with decorative laminate face veneer with lipping complete all as specified and directed.

S & F Butt hinges (ISI marked), medium weight, cold rolled mild steel of size 100 mm complete all as specified and directed.

S & F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300mm long complete all as specified and directed.

S & F Aluminium handles, cast type, anodized 150 mm size complete ISI Marked complete all as specified and directed.

S & F 150mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F 125mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

S & F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.

S & F factory made solid Panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and gap insert for top and bottom rail; panelling of plain colour PVC sheet 5mm thick to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, all as per specification and drawing complete all as specified and directed.

S & F of 35 mm thick (Batten thickness) second class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. with sash bars, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. and size of the members of shutter is as specified in clause No. 8.24 (a) of MES schedule part – I (Specifications - 2009) complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick Figured glass, pin headed type glazing with oil putty in square n exc 0.50 sqm in each pane complete all as specified and directed.

M & L for treating the bottom and sides of excavation @ 5 litre /Sqm of emulsion complete all as specified and directed.

M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :- (i) Properly cleaning and drying concrete surfaces. (ii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm. (iii) Laying over the bitumen coat surfaces APP based polymeric water proofing membrane, weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction. NOTE:- 1. The polymeric water proofing membrane shall be extended upto parapet walls and inserted in walls by cutting groove and making good with cement mortar 1:3 as directed. 2. The work shall be carried oiut by authorised applicator of Manufacturer. 3. Manufacturer test certificate of membrane shall be submitted to Engineer-in-Charge.

S&F for steel ventilator with guard bar, top hung shutter including hinges, steel peg stay, complete all as specified and shown on drawing No CE (AF)/NGP/TD-89/2007 Sheet No 1/9 to 9/9. (sheet glass shall be measured and paid separately

S&F for openable double shutter steel windows i.e. glazed and gauged with side hung shutters including projecting type hinges, steel handles, and steel peg stay, complete with glazing bars, dovetailed or welded joint including PCC 1:3:6 type C-2 filling in back side of frame, complete all as per detail shown on drawing No. CE(AF)NGP/2003/TD/08 sheet no. 1/12 to 12/12. Note-(i) MS grill shall be measured and paid separately under relevant item. (ii) Wire mesh and glazing including sheet glass shall be measured and paid separately under relevant item

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified .

M & L for treating the Top surface of filled earth @ 5 litre /Sqm of emulsion complete all as specified and directed.

M & L for treating the soil alongwith external perimeter of building @ 2.25 litre emulsion per meter of perimeter complete all as specified and directed.

S & F 600mmx450mmx6mm bevelled edge mirror mounted in 40mm wide PVC frame of approved size and colour on 6mm thick AC building board of commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed.

S&F ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed of 20 mm dia (min weight-210 gms) complete all as specified and directed

S & F 15mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S & F 20mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S & F 25mm bore tubes medium grade galvanised with all fittings & fixed complete to walls & ceiling or laid in floors or trench etc complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-I of 500 Ltr capacity complete all as specified and directed.

S&F PVC valve less, syphonic action type flushing cistern of 10 ltr capacity, low level with inlet, ball valve, float and handle including brackets incl PVC connection 15mm dia 450mm long with CP brass nuts on both sides complete all as specified and directed.

S & F vitreous china wash down WC pan (pedastal pattern) white (excl flushing cistern & flush pipe) incl plastic water closet seat cover, white; closed pattern with flat bottom & trap incl connection to drain & to flushing pipe antisyphonage pipe etc complete all as specified and directed .

S & F PVC (SWR) bends any radius of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) branch piece, single (Single 'Y') equal or unequal of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl of 110 mm dia complete all as specified and directed.

S & F PVC (SWR) vent cowl of 75 mm dia complete all as specified and directed.

M&L PVC (SWR) pipes 110 mm bore single socketed, in any length with rubber ring joints,fixed to wall complete all as specified and directed.

S & F of 15 mm bore bib tap, cast copper alloy, fancy type chromium plated , Quarter turn screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F 15mm bore stop cock/angle cock, cast copper alloy CP, fancy type high presure with capstan head handle, screwed both ends for iron pipe of for unions all as specified

S&F vitreous China Urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe)

S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)

S & F Vitreous China wash basin white flat back size 550x450 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia,PVC flexible waste pipe of adequate length and dia complete all as specified and directed.

S & F of 15 mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated fancy type, screwed down high pressure, with or without lettered 'HOT' or 'COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F PVC connection 15mm dia size and 450 mm long with 2 Nos brass nuts with washers complete all as specified and as directed.

S & F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of 75mm dia. complete all as specified and directed.

~Ditto~ all as per Ser item No 82.00 above but 110 mm bore complete all as specified and directed.

S & F 75 mm bore PVC (SWR) floor trap, plain with grating including jointing to waste pipe, all as specified and directed.

S & F of 20 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165. complete all as specified and directed.

M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red-oxide primer complete all as specified and directed.

Demolition of cement concrete (un-reinforced) in ground floor and paving not exc. 15 cm thick (Below and above ground level) complete all as specified and directed.

Removing excavated soil exc 1.5 KM but not exc 5 KM and depositing where directed at a level not exc 1.5 mtr from the starting point complete all as specified and directed.

Taking down cement plaster or cement lime plaster of any description on bricks or stone walls etc incl raking out joints hacking for key scrubbing down with water etc complete all as specified and as directed .

Demolition of cement concrete (Unreinforced ) of any description and in any position not otherwise specifically described for complete all as specified and directed.

M & L for providing 100 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in sub floor, sub base of floor complete all as specified and directed.

M & L for providing 150 mm thick cement concrete 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in floor complete all as specified and directed.

M & L for providing 25 mm thick cement concrete 1:2:4 type B-0 (using 12.50 mm thick graded stone aggregate) as in floor, and finishing top surface even and fair to receive the Floor finishes complete all as specified and directed.

Supply and fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and pattern having moisture content less than 2%, humidity resistant of 99%, NRCO 0.50 to 0.75 as per IS 8225:1987, noncombustible as per BS 476 (part 4) - 1970 and light reflectance of 85% minimum to be laid in true horizental level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120gm/Sqm including both sides) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross T of size 15 x 32 mm of length 1200mm and secondary intermediate corss T of size 15 x 32 mm of length 600mm to from grid module of size 600x 600 mm suspended from ceiling using galvanised mild steel items (galvanised @ 80gm/Sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specification, drawing and complete all as specified and directed.

M&L preparation of old painted steel and iron surfaces of any descriptions not otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint of approved tint complete all as specified and as directed.

M & L for plain cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate), as in copings, benching, roof kerb and the like including weathering, slightly rounded or chamfered angles & throating as directed including necessary form work as required complete all as specified and directed.

S&F Bib taps standard of PTMT any colour high pressure screwed for iron pipe and fixed (min weight 15 mm-105 gms) complete all as specified and directed.

M&L Concrete bed of type D-2 1:4:8 to drain pipes of size 150 mm including packing under, and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

M&L Reinforced concrte pipes 150mm bore, class NP-3, laid and jointed in trenches or in floors complete all as specified and directed

M&L Precast RCC 1:2:4 type B1 (using 20 mm graded aggregate ) as in cover slab and similar works including necessary formwork set in CM (1:4) complete all as specified and directed

Extra for forming fair finished drain or channel, 30 cm inner girth in cement concrete using extra cement including forms, moulds, mitred, stopped ends, complete all as specified and directed.

Supply only water proofing compound

M & L Loose filling with broken brick aggregates of gauge 80 to 150 mm in soakage pits, soakage wells

Demolition of Brick work or stone/ boulder masonry built in cement mortar complete all as specified and directed

Rolling and consolidating formation surfaces in cutting by power exceeding 8 ton and n.exc 12 Ton complete all as specified and directed

M&L for 100mm thick Soling (or sub base) with broken boulders of size 90 to 63 mm or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and camber including rolling and consolidating by power roller exc 8 ton and n exc 12 tonne.

M&L for preparation of surfaces of roads, bituminous or rigid pavement, flexible pavings, aprons and the like not exceeding 10 cm width or girth as in lines dashes, arrows, letters etc and applying one coat of aqua based road marking paint of any tint as required at site complete all as specified and directed.Note : (i) Availability of site and working hours for painting will depend on Air Trafic Control (ATC) Unit . Nothing extra shall be admisible if intermittent working hours for painting will be available due to operational activity.

M&L Reinforced concrte pipes 450mm bore, class NP-3, laid and jointed in trenches or in floors complete all as specified and directed

M & L for Hardcore of gauge exc. 63 mm but n.exc 100 mm deposited, spread and leveled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed. .

M&L Cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less all as specified and directed.

M&L Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound alll as per direction.

M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound all as per direction

M&L poweder coated alluminum doors with shutters chowkhat/ frame made with aluminum shutters size100x44.45x3.0 mm thick and shutters with vertical rails of section 85x44.45x2.0 mm thick, top, bottom & middle rails of section 114x44.45x2.00 mm thick including 5.0 mm thick tinted glass, and 12.5 mm thk both side laminated particle board and necessary fixing arrangement jointing cleat glazing clips rubber packing allminium anodized beading screws etc allumnium tower bolts 200 mm 02 Nos, 100 mm ,hydranlic floor door spring of make; SANDUU /SAMRAT fixed to floor mortice lock 100 mm size 4 lever-01 (Godrej /Link make) round handle or push plate 125 mm fitted to shutter framed fixed in opening with metal rawl plug & 6 Nos 100 mm long counter sunk screw in each chowkhat complete all as specified and as directed

M&L poweder coated aluminium anodised three way track sliding windows of frame size 92 mm x 31.75 mm x 1.5mm thickness and of shutter size 40 mm x 18 (with 9.00 mm interlocking legs) x 1.45 mm thick section (two shutter glazed, covering half of span of opening each & one shutter sketlon covering half of span of opening ) incl provn for making windows air tight, including 95mm aluminium handle with spring lock , stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with steel wire staples and 5mm thick plain glass including necessary fitting/ fixture/ aluminium snap beads complete all as specified. Note: Measurement shall be taken for clear opening i.e. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately, complete all as spcified and directed.

S& F Aluminium powder coated Grill (DECO grill DG 103 of 7.5 mm thick of M/s ELESAR, M/S Royal Grill , M/S National Grill Associated profiles & Aluminium Ltd ) fixed with suitable 'F' Section 15.30 X23.40X 1.40 mm (minimum), fabricated and riveted to aluminium window / ventilators complete all as specified and directed .

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, ceiling rose, pendants, Holders, etc and making good all disturbed surface to wall, floor etc by means of cement mortar (1 : 3) or plaster of Peris and to match / finish new surface as the existing surface either by using same colour distemper, Putti or white / colour wash all as required and directed by Engineer-in-Charge.

Taking down main switch/DB/AC box of any capacity including fixing accessories complete all as specifed and as directed.

M & L for concealed point wiring on wall and surface on ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white / ivory PVC conduit medium grade ISI marked not less than 19 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.5 mm with earth dolly suitable for mounting modular switches incl modular metal flush boxes and modular face plate as per site requirement for fixing of modular switches / sockets, fan regulators, including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces all as specified and directed by Engineer-in-Charge for the following :- For one light/ fan/ call bell.

-Ditto- all as per item No 119 here-in-before but For one socket point controlled by one switch on independent board.

-Ditto- all as per item No 119 here-in-before but For one socket point controlled by one switch on same board.

All as per item No 119 here-in-before but for power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead.

S & F switch flush type single pole one way 5 Amps, 240 volts, white finish complete all as specified.

S & F switch flush type 15 Amps, 240 Volts single pole white finish complete all as specified.

S &F socket outlet 5 pin, 5 Amps flush type white finish complete all as specified.

S&F, socket outlet 2 in 1, 3 pin, 5/15 A, flush type universal, 240 V white finish complete all as specified.

S&F ceiling rose, surface backlite, 65 x 20 mm three terminal .

S&F electronic socket size, rotary, 5 speed step type regulator, 120-230 V white finish complete all as specified.

S&F, in replacement, double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires all as directed.

S&F double door metallic sheet metal enclosure for DB when MCBs to be used TPN, 4 ways, 415Volts (horizontal type) with 200 Amps rated bus bar suitable for TPN MCB / 4 pole Isolator fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs for cables/wires complete all as directed.

Supply & fixing, testing and commissioning in replacement of MCB SP 240 volt 6 Amp to 32 amp 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified & directed.

-Ditto- all as per item No 131 but of SP 40-63 Amps.

-Ditto- all as per item No 131 but of SPN 32 Amps.

-Ditto- all as per item No 131 but of TPN 40 / 63 Amps.

S&F in replacement sheet metal enclosure , 20A single pole and neutral with a two pin and earth plug and socket complete in metal clad board fixed properly on in concealed position all as directed by Engineer-in-Charge.

Supply and fixing Light duty exhaust fan of 300mm sweep including making necessary electrical connection complete all as specified and as directed

Material and Labour for making circular holes suitable for fixing of 12” sweep Exhaust fans by cutting the wall any thickness/ required circumstances for exhaust of air and including grouting of rag bolts and nuts complete including finishing of disturbed surfaces by using cement mortar 1:3 complete including louvers all as specified and directed.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 2.5 sqmm drawn in new/existing MS/PVC conduit with 2.5 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Make of wire: Polycab/Havells / Finolex . Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 4 sqmm drawn in new/existing MS/PVC conduit with 4 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

M & L sub main wiring with two single core PVC-FRLS insulated unsheathed multi stranded copper conductor cable of size 6 sqmm drawn in MS/PVC conduit with 6 Sqmm PVC-FRLS insulated unsheathed multi stranded copper conductor as a continuous earth wire complete all fixing accessories such as couplers lock, nuts, sadles, pipe hooks etc fixed properly including taking down old unserviceable sub main wiring complete. Note : (i) Two single core cable and one run of earth copper conductor will be measured and paid as one unit length. (ii) PVC Conduit if required shall be measured and paid separately under respective item.

S&F rigid non metallic medium white / ivory PVC conduit medium grade ISI marked of size not less than 20 mm dia concealed position on wall and surface in roof/ceiling inclusive all fitting such as tee, bends, reducer, elbow, bell mouth, tube ends and all fixing accessories such as couplers lock, nuts, saddlers, pipe hooks etc fixed properly on as in concealed position incl cutting chasing & making good to disturbed surfaces & matching with the existing colour of wall/floor etc all as directed by Engineer-in-Charge.

S&F in replacement for energy saver LED light fitting 40 watt, 230 Volts, single tube mounting including LED Tube/ LED blocks 40 Watt ,Lumen OUTPUT NOT LESS THEN 100 LM /WATT with 50000 burning Hours, PF = 0.95 complete with electronic driver LED Printed board, end cover, connector box etc and accessories, prewired, LED including required fixing arrangements and electrical connection three core copper cable from ceiling rose to led light fitting all as directed including removing of UNSV tube light fitting. Make: PHILIPS BN100C LED 40S-6500 PSU L120GR or Wipro Cat Part No LL24-541-xxx-57-xx OR equivalent in Havells

M & L energy saving LED 4ft Batten 20 Watt with a nominal system lumen output of 2500 lumens and a minimum system efficacy of 110 lm/W with fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV . The luminaire shall have a rate system lifetime of 40,000 burning hours at L70. The luminaire should have a color temperature of 6500K and CRI>80. The luminaire shall meet IP 20 rating with THD < 10% and PF > 0.95. The luminaire housing should made of Extruded aluminium batten with a PC glossy diffuser. Make : Philips Cat No : BN 021 LED 20S 6500 PSU GR S1 or equivalent in Wipro / Havells.

M & L energy saver LED Smart Batten fitting 10 watt, 230 Volts, Box type. etc and accessories, including required fixing arrangements and electrical connection three core copper cable from ceiling rose to light fitting and removing UNSV bracket with sketch fitting all all as directed. Make : Philips Cat No BN 021 LED10S - 6500 PSU GR S1 or equivalent in Wipro / Havells

S&F in replacement complete for recess mounting LED Panel 600x600 mm fittings made of CRCA powder coated finish LED used shall be SMD type and fixture should have minimum efficiency at system level (Not chip level) 100lm/watt, life of fixture 50000 burning hours @ L70% Lumen maintenance CCT UP TO 6500,CRI MORE THEN 80,pf 0.95 and an operating voltage 140 Volt to 270 volt internal surge protection 2.5 KV AS IS 10322 and IEC 60598 system wattage 31 - 36 watt complete electronic drivers with all internal electric connections complete all as specified. Make :Philips Cat No. RC 380 B LED 36S -6500 G4 L60 W60 PSU OD or Wipro Cat Part No CRCO10R038HP57GL1 or equivalent in Havells

Supply and fixing in repair energy saving envionmental friendly long life LED 5700 K,exclusive innovative die cast alumenium IP-65 flood light with high power LEDs as light source,suitable for highlighting archtecture façade highmast and general purpose lighting including electrical connection complete all as specified and directed. Make Philips Cat No BVP192 LED110 CW HO NB FG GR PSU or Wipro Cat Part No LF20-122-060-57-G2 or equivalent in Havells

M&L in replacement for LED Building Security Light 110 watt orf alumenium PDC housing glass cover with IP 66 protection all as specified and directed complete including taking down old unserviceable fitting .Make wipro cat No LR02-122-XXX-57-G2 or Philips Cat No BRP 409 LED 115 CWSLA FG PSUGR V2 or equivalent in Havells

Supply and fixing LED post top, 35 watt made in Pure polyester UV resistant powder coated die-cast aluminium with PMMA clear diffuser for uniform illumination and prewired with all accessories complete including all electrical connection. Make : Wipro Cat No LP07-431-xxx-57-CL or equivalent in Philips/Havells

Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth strip of 32x6mm (up to 7.5m in length from earth plate) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shwon in electrical plate no 5 of SSR part 1 including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS bar 8mm dia 150mm c/c reingorcement, watering funnel 15mm dia light grade for protection of earth electrode 20mm dia for watering all as speicified and directed and tested on completion.

M & L for flameproof concealed point wiring on wall and surface wiring on ceiling / roof /hangar with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled ERW rigid steel conduit (metallic) not less than 19 mm dia with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-FRLS insulated and unsheathed copper stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces for one light, fan point controlled by one switch complete all as specified and directed.

M & L for flameproof concealed point wiring on wall and surface wiring on ceiling / roof /hanger with necessary fixing arrangements with stranded PVC-FRLS insulated and unsheathed copper stranded conductor of size 2.5 Sqmm, 1100 volts grade drawn in and including 16 gauge stove enameled ERW rigid steel conduit (metallic) not less than 19 mm dia with all MS conduit accessories/ fittings such as junction boxes, bends, tee, elbow etc including PVC-FRLS insulated and unsheathed copper stranded conductor of size 2.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surface by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of peris/ Putti or distemper / colour wash with same existing colour surfaces for one light, fan point controlled by one switch complete all as specified and directed.

S&F in repair Flame proof - weather proof switch socket & plug combined 16 A, 250 V(2P+Earth) with cable termination in LM 6 aluminium alloy housing complete all as specified and directed. Make : Bajaj/Sudhir/CG/Shyam switch gear Pvt Ltd.

S&F in repair flame proof weather proof threaded type junction box LM 6 aluminium alloy 2 way complete including taking down old unserviceable complete all as specified and directed. Make : Bajaj/Sudhir/CG/Shyam switch gear Pvt Ltd.

S&F in repair flame proof weather proof metallic hose conduit 3/4 " dia 300mm long complete all as specified and directed. Make : Bajaj/Sudhir/CG/Shyam switch gear Pvt Ltd.

S&F in repair Flame proof weather proof switch with cable termination in LM 6 aluminium alloy housing 16 Amp, 240 volts complete including taking down old unserviceable complete all as specified and directed. Make : Bajaj/Sudhir/CG/Shyam switch gear Pvt Ltd.

S&F in repair Flame proof weather proof LED luminaire 2 X16/20W, epoxy finish with LM 6 aluminium housing , heat resistant borosilicate tubular glass held in two alluminium cups with inbuilt DRIVER accessories & LED tubelight including taking down old unserviceable complete all as specified and directed. Make: CROMPTON cat pt no EXTN2LT8-16/20 or equivalent in Sudhir/Bajaj

Supply, installation of perforated GI cable tray 2mm thick, 150 mm wide and 100mm height inclduing laying of eixsting LT cable of any size and any capacity with fixing accessories complete all as directed by Engr-in-Charge.

M&L for XLPE insulated, armoured heavy duty electric cable with stranded aluminium conductor, 1100 volts grade 10 sqmm 4 core laid in trenches/panel or passing through pipe including connecting with suitable lugs, nuts and bolts and testing complete all as specified and directed

Supply and filling fine sand to the full width of trenches for protection of cables including spreading and punning down including watering consolidation complete all as specified. Note : Thickness of sand will be paid after punning.

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of HT Cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed.

Supplying and laying burnt brick protective cable cover laid in trenches across the trench over the cable as cable protection complete all as specifed and as directed.

Supply and fixing GI pipe light grade 40mm dia for cable protection complete all as specified and directed by Engr-in-charge

AMRENDRA CONSTRUCTIONS

continentalconstructionco.