SPL REPAIR TO RENEWAL REPLACEMENT AGAINST SURVEYED OFF FURNITURE AT UDAIPUR MIL STN UNDER AGE (I) UDAIPUR

Amount

SOFA SET 4 SEATER COUSHION (FD-281) Size shall consist of four small pieces of one seat. Wood shall be of first class hard wood teak(MP). Legs shall be of 70mmx35mm in section. Wooden arms shall be made to shape out of 35mmx70mm in section teak wood. Front and side rails shall be of 35mmx100mm teak wood. 40mmx40mm wooden bearers shall b provided at the bottom of seat over which seven numbers 50mmx20mm wooden battens shall be fixed equally spaced in single piece seat. The filling in the back frame of single piece shall be done with four numbers 50mmx20mm in section teak wood battens. Back shall be made of frame of rails and styles of 70mmx35mm. Wooden rails 30mmx50mm in section shall b provided between back legs for support of back frame. 100mm thick seat cushion of 'cool' foam of 32 density. 530mmx500mm, covered with tapestry cloth shall be provided at seat and back. All wood surfaces exposed to view when placed in position shall be French polished with high gloss finish.

SOFA SET 5 SEATER (FD/MAP-II/02) One set consist of one long piece of three seat and two small pieces of one seat each. All wood shall be of first class hard wood teak. Legs shall be of 70mmx35mm in section made to shape as shown on drawing. Wooden arm shall be made to shape out of 35mmx70mm in section teak wood. 100mm thick cushion of 32 density covered with best quality tapestry cloth shall be provided at seat as directed by Engineer-in-charge. All exposed surfaced shall be melamine polished. Rest all as per drg and as spcified.

TABLE 3' X2' WITHOUT DRAWER (FD-284) Overall size shall be 900mm long 600mm wide and 760mm high. Wood shall be first class hard wood teak. Top shall be prelaminated post forming MDF board with 18/19mm thick. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE WRITING WOODEN (FD-275) Overall size shall be 1145mm long 600mm wide and 760mm high. Wood shall be first class hard wood teak. Top shall be prelaminated post forming MDF board with 18/19mm thick. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE DRESSING LADIES WITH MIRROR (FD/MAP-II/07) Timber shall be well seasoned teakwood (1st class) Grade-I. Top of table and front of drawer shall be of melamine faced pre-laminated particle board 18mm thick + 5%. All other particle board as shown on drawing shall be 18mm thick veneered particle board (one side veneered and other side commercial). Back of mirror shall be 6mm thick commercial ply sides and frame shall be teakwood. Bottom and partition of drawer shall be 12mm thick particle board one side teak veneered and other side commercial. Exposed edges of particle board shall be covered with 4mm thick teak wood first quality beading/edging. The edging shall be glued with Fevicol and fixed with headless nails of suitable length /gauge at 75mm centre to centre. Mirror shall be 5 mm thick copper electroplated polished glass of approved make. Knobs shall be as approved and fixed with steel screws of suitable length. Plain glass of 5mm thick shall be provided for sliding door. All exposed surfaces of teak wood and teak veneered surfaces shall be French polished.

Description of Work / Item(s)

Amount

ALMIRAH LARGE STEEL WITH SHELVES (FD-1031) Overall size shall be 910x490x1900mm made of MS sheet. Lock shall be provided with duplicate keys. 1mm thick MS sheet shall be provided for leg, body and shelf. Handle shall be chrome plate. Two coat of enamel paint over a coat of primer with spray on all surface. Rest all as per drg & as specified.

CHAIR WRITING (FD/E6/MAP/12) Seat and back are made up of 12mm thick hot pressed plywood upholstered with acrylic fabric and moulded polyurethane foam together with seat and back covers. The back foam is designed with contoured lumber support for extra comfort. Armrest are made of black integral skin polyurethane with 75-85 Shore 'A' Hardness and reinforced with MS insert. The size of armrest is 24.0cm (L) x 6.4(W) x 3.3cm(T). Frame shall be CRCA section of 10x25mm & provided with PVC stoppers. Rest all as per drg or as specified.

TABLE OFFICE OFFICER STEEL (1371MM X 762MM X 762MM) (FD-1003) Overall size shall be 1371mm long 6mm wide and 762mm high. Steel frame of overall size shall be as per drawing. Four legs of 25mm mild steel tube of 1.6mm wall thickness. Locking device shall be provided to drawers. Top shall be prelaminated post forming MDF board with 18/19mm thick. Two coat of enamel paint over a coat of primer with spray on all surface. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE OFFICE CLERK STEEL (FD-1004) Overall size shall be 1200mm long 610mm wide and 760mm high. Steel frame of overall size shall be 1160mm long, 570mm wide and 742mm high. Four legs of 25mm mild steel tube of 1.6mm wall thickness. Locking device shall be provided to drawers. Top shall be prelaminated post forming MDF board with 18/19mm thick. Two coat of enamel paint over a coat of primer with spray on all surface. Legs shall be provided hard rubber shoe. Rest all as per drg & as specified.

TABLE DINNING ORS (FD-165 (M)) Overall size shall be 1900mm x 685mm x 760mm. Legs shall be 25mm x 25mm sq MS tube 16 Gauge. 19mm thick black board with 22G aluminium sheet shall be provided on top of table. All steel surfaces exposed to view when place in position shall be given two coats of enamel paints over a coat of primer. Rest of all is as per drawing and specification.

BHARAT BUILDERS

BHARAT BUILDERS