REPAIR MAINT OF SOLAR PLANT AND LT DISTRIBUTION SYSTEM AT DBS FASF JEPTA AT JALIPA MIL STN UNDER GE ARMY BARMER

Amount

S&F in repair MC4 Male/Female connectors set compatible with module connectors with min of IP66 rating and suitable for 6 Sqmm cable complete all as specified and directed.

S&F in repair single core annealed copper DC string cable of 1C x 6 Sqmm Solar grade, UV resistant 1.5 kV rated DC Cables with elctron beam XLPE insultaion, maximum energy loss limiting to <1.5% complete all as specified and directed.

S&F in repaire PVC insultated copper cable of single core 6 Sqmm for earthing continuty conductor including suitable copper lugs, screws, nuts & bolts, washers etc for connecting complete all as specified and directed.

S&F in repair PVC/XLPE insulated, UV resistant AC copper cable of 4 core 16 Sqmm 1.1 kV rated, including suitable copper lugs, screws, nuts & bolts, washers, cable ties etc complete all as specified and directed.

Supply and laying in repair XLPE insulated, armoured, heavy duty electric UG cables with aluminium conductor 1100 volts grade complete including porviding lugs as required as specified and directed for cross-sectional area 300 sqmm 3.5 core complete all as specified and directed.

Supply and laying in repair XLPE insulated, armoured, heavy duty electric UG cables with aluminium conductor 1100 volts grade complete including porviding lugs as required as specified and directed for cross-sectional area 300 sqmm single core complete all as specified and directed.

S&F in repair solar cell based solar radiation sensor (Pyranometer) with monocrystalline silicon solar cell (50X50 mm²) in UV rsistant PVC plastic housing, operating temperature -45º to +70º C with solar irradiance range 0-1500 W/m², output 4-20mA with linear output in the range 0 to 1500 W/m², power supply 7-30 V DC, accuracy comparable to class 1 pyranometer confirming to ISO 9060: better ±5%, very small drift<0.3/year, advanced weatherproof junction box made of UV resistant matrial with cable gland and screw less terminal for the connection of the measuring cable, compatible to RS 485 cable and data accusition system of Logic Power AMR (Model SOZ-03) complete all as specified and directed.

Annual subscription of superisory control and data acquisition sytem (SCADA) for monitoring and data logging of plant generation and health for FY 23-24 and FY 2024-25 to the existing maintainer of SCADA system (M/s Logics Power AMR Pvt Ltd) complete all as speciied and directed.

Annual subscription of GSM mobile numbers (04 Nos) for collection and transporting of generation and plant health data to SCADA system maintainer with 2.5 GB, 4G data/day plan of existing data provider complete all as specified and directed.

Supply and fix in repair HRC fuse link of rating 33-36 KV 3.15 A rating for PT of 33 KV VCB unit complete all as specified and directed. Make Phoenix or techno commercially equivalent.

Supply & fix in repair Cast resin potential Transformer 36 kV/110 V single phase 100 VA burden 50 Hz , class 0.5, voltage factor 1.2 cont & 1.5 for 30 Sec insulation level 36 KV/70KV/170 KVP including necessary control wiring complete all as specified and directed.

Supply and fix in repair 40 to 50 mm thick roughly hammered dressed stone 25 to 30 cm wide length approximately 1.5 meter ± 10% for covering cable trench from LT panel to transformer, laid dry and abutting each other with gap adjacent slab not exc.10 mm for protection of cable complete all as specified and directed.

Supply and fix in repair flexible hose 25 mm dia for protection of DC/AC cable laid below the solar modules including the necessary ties complete all as specified and directed.

Supply, jointing and testing cable jointing kit for 33 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm including taking out old one complete all as specified and directed. Make: Raychem EPKT 6364 or techno commercially equivalent.

Supply, jointing and testing cable jointing kit for 33 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 120 Sqmm including taking out old one complete all as specified and directed. Make: Raychem EPKJ 6116 or techno commercially equivalent.

Excavating in trenches n. exc 1.5m wide and not exc. 1.5m in depth for foundation of poles, laying UG cables, etc and getting out in soft/loose soil complete all as specified and directed.

Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting point in soft / loose soil complete all as specified and directed.

Returning filling including spreading levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed.

M&L for boring/drilling by machines/manual horizontally under the road in any type of soil without cuttiing/disturbing the existing road and inserting GI pipe of any size for drawing the cable complete all as specified and directed. (GI pipe shall be measured and paid seperately)

Material and labour for sand cushioning for under ground cables, spread in trenches, river sand including cleaning, spreading levelling, punning for laying/cushioning of cable all directed. with layer of 8 cm deep before laying cable and 15 cm depth after laying and stretching the cable complete all directed. Note: For the Purpose of payment punned thickness shall be measured.

Supply and laying unreinforced precast concrete cable cover, class LV, Type 1 flat, size 250 mm x 150 mm x 40 mm as mechanical protection to underground cables laying with length of the cable cover equal to the width of the trench complete all as specified and directed.

M&L for galvanised steel tube 50mm bore (light grade) laying in road/drain crossing for cable protection pipe complete all as specified and directed.

M&L for galvanised steel tube 50mm bore (light grade) fixed to pole/wall/floor for cable protection pipe including clamp of MS flat of size 50x5mm and nut, bolt & washers of size 50x12mm for clamping of cable protection pipe with wall/pole as where required complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling & mass concrete for sub base of poles complete all as specified and directed.

M&L cement concrete 1:3:6, type C-2, (using 40 mm graded stone aggregate) for foundation of poles, stays, etc including form work as required/ordered complete all as specified and directed.

M&L cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in coping of poles, padestal, etc including necessary form work etc complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc 0.5 cum getting out , returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in hard/dense soil complete all as specified and directed.

Supply and laying in repair XLPE insulated, armoured, heavy duty electric UG cables with aluminium conductor 1100 volts grade complete including porviding lugs as required as specified and directed for cross-sectional area 10 sqmm 2 core complete all as specified and directed.

All as per srl item No 30 above but of size 10 Sqmm, 4 core

All as per srl item No 30 above but of size 16 Sqmm, 2 core

All as per srl item No 30 above but of size 16 Sqmm, 4 core

All as per srl item No 30 above but of size 25 Sqmm, 3 1/2 core

All as per srl item No 30 above but of size 35 Sqmm, 3 1/2 core

All as per srl item No 30 above but of size 50 sqmm, 3 1/2 core

All as per srl item No 30 above but of size 70 sqmm, 3 1/2 core

All as per srl item No 30 above but of size 95 sqmm, 3 1/2 core

All as per srl item No 30 above but of size 120 sqmm, 3 1/2 core

All as per srl item No 30 above but of size 150 sqmm, 3 1/2 core

Dismantling/uprooting of LT unserviceable pre-stressed concrete/steel poles of any size and length including taking out dismantled portion of poles embeded in concrete after necessary demolition of concrete foundation and disposal there of complete all as specified and directed.

M&L for Prestressed concrete pole, 9.0 metres long, 102 mm x 152 mm at top and 102mm x 289 mm at bottom, class 10 complete all as specefied and directed.

Dismantling cross arms of MS channel or angle sections etc. and keeping serviceable materials in safe custody for re-use and/or unserviceable materials removing from the site complete all as specified and directed

Fixing only serviceable cross arm, MS Channel, angle section obtained from srl item No 43 above after painting with one coat of aluminium paint including preparation of old steel surfaces complete all as specified and directed.

M&L Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections, including nuts, bots, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat (red oxide, zine chrome primer), one under coat and one finishing coat of aluminium paint including preparation of surfaces complete all as specified and directed.

Dismantling of ACSR conductors or disturbed span including line spacer and keeping serviceable materials in safe custody for reuse and unserviceable materials removing from the site complete all as specified and directed.

Fixing only by re-straining, tightening of ACSR conductors of any size/type on LT poles including necessary new aluminium binding wire for fixing with insulator/PVC sleeves for jumper etc as required complete all as specified and directed. (Note : Serviceable ACSR conductors shall be obtained from item No. 46 above).

M&L for aluminium conductor steel reinforced (ACSR) on LT poles including straining, binding with insulators with aluminium binding wire with insulator as in OH conductor, providing PVC sleeves for jumpers complete all specified and directed.

Dismantling insulators of any type and any size and keeping serviceable materials in safe custody for re-use and removing unserviceable materials from the site complete all as specified and directed.

Fixing only serviceable pin type porcelain, vitreous, (white/brown or green) insulator for 1100 volts grade of any type obtained from srl item No 49 above complete all as specified and directed.

Fixing only serviceable shackle type porcelain, vitreous (white / brown or green) insulator of any size and shape for 1100 Volts grade obtained from srl item No 49 above complete all as specified and directed.

S&F pin type, porcelain, vitreous, white, brown or green insulator including one galvanised mild steel spindle, two galvanised iron washers and one galvanised iron nut, 100 mm height, 65 mm dia for 1100 volts grade complete all as specified and directed.

S&F shackle type, porcelain, vitreous white, brown or green insulator including galvanised mild steel straps of size 31 x 3 mm, 12 mm dia insulator bolts, nuts and washers for working pressure 1100 volts of size 75 mm height, 90 mm dia complete all as specified and directed.

Dismantling LT Stay assembly of any size and unserviceable materials removing from the Site(s), complete all as specified and directed. a) Unserviceable Stay assembly shall be taken off/dismantled at Ground Level and making good disturbed ground surface. b) Rate is inclusive of necessary earthwork for demolition of cement concrete complete.

M&L Stay assembly for LT complete with accessories as shown in Electrical plate No. 1 of MES schedule Part- I, 16 mm dia stay rod, 7/3.15 mm galvanised stay strand complete all as specified and directed. (Note: Loop insulator, stay clamps, excavation/ earthwork and cement concrete shall be measured and paid for separately under relevant items of this Schedule).

S&F in repair loop type insulators vitreous porcelain white / brown or green small size with overall dimensions 65x90 mm clearance of hole 16 mm dia complete all as specified and directed.

Dismantling earth wire of any size/dia, guarding cradle of disturbed span and keeping serviceable materials in safe custody for re-use and removing unserviceable materials from the site complete all as specified and directed.

Fixing only serviceable GI wire 3.15 mm or 4 mm dia martial obtained from srl item No 57 above complete all as specified and directed.

M&L for cradles, hexagonal / rectangular, fabricated or continuous earth wire with galvanised steel wire 3.15 mm or 4 mm dia complete all as specified and directed.

S&F in repair PVC fibre separator for LT line 1100 volt OH conductor 3/4 wire system for maintaining horizontal spacing of conductor complete with nut & bolt minimum two nos in a span complete all as specified and directed.

Trimming of tree branches around the LT /HT OH conductor, pole & stay (not less than 3 metre) to clear the over head lines including cleaning of birdnest, creepers on poles and stays etc complete as required including removing and disposed off from the site complete all as specified and directed. Note : The quoted shall deemed to be inclusive of provision of periodically cleaning/cutting etc including disposal there-off and 'span' will be measured & paid only once in entire contract period.

M&L in repair earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less then 2.25m deep bellow ground level) with top edge of the plate not less then 1.5m deep below normal ground level connected to galvanised iron strip of 32 x 6mm earth lead by means of bolt, nuts, washers of galvanised steel earth strip protected by and including GI pipe 40mm dia bore (light grade) and conncted to main test point directed and including concrete pit in PCC(1:3:6) type C-1 precast RCC(1:1.5:3) type A-1 cover slab 54 x 5 cm reinforced with 4mm dia TMT bars @ 150 mm c/c both ways with one handle for lifting made out of 8mm dia TMT bar embedded in precast cover slab funnel wire mens 20mm bore GI pipe (medium grade) for watering charcoal and salt in altemate layers, including necessary excavation and earth work in any type of soil complete all as shown on electrical plate No3 of SSR part-I complete all as specified and directed

M&L in repair earthing complete with galvanised steel earth plate electrode 600X600X6 mm thick buried directly in ground preferably vertically in ground with top edge not less than 1.25 mtr deep below normal ground level connected with and including galvanised iron wire 4 mm dia as earthing lead by means of nuts bolts and washers of galvanized iron protected by 15mm dia (medium grade) GI tubing, funnel, wire mesh, 20mm bore GI tubing (light grade) watering pipe , including concrete pit in PCC (1:3:6) type C-1, precast RCC (1:2:4) type B-1 cover slab of size 350x350x50mm reinforced with 8mm dia TMT bars @ 15cm c/c in both ways and 10mm dia MS handle (01 No) of suitable size, charcoal and salt in alternate layers necessary excavation and earth work in soft/loose soil all as shown in Electric plate No. 3 of SSR part-I and testing on completion complete all as specified and directed.

Supply,install, commission and testing in repair cubical type LT panel board ,outdoor canopy type, manufactured by a CPRI approved factory, floor mounted, dust & vermin proof,front and rear operated door with necessary locking arrangement made of 50 x 6mm MS angle iron frame work and CRCA sheet of 3.00 mm thick duly painted with two coats of powder coated paint of approved shade after seven tank treatment process both internally and externally. The panel shall be suitable for 415 Volts, 50 HZ, 3 Phase 4 wire system and shall be complete with suitable capacity copper bus bar (1.5 times the incoming switch gear current rating) with suitable size of PVC insulated copper conductor, thimbles glands complete all as specified and directed with the following accessories :- INCOMING (a) MCCB 4 pole, 415 Volts, 250 Amps, 25 KA - 01 No. OUTGOING (a) MCCB 4 pole, 415 Volts, 125 Amps,16 KA -01 No. (b) MCCB 4 pole, 415 Volts, 100 Amps,16 KA -02 Nos (c) MCCB 4 pole, 415 Volts, 100 Amps,10 KA -01 Nos (Spare) (d) MCB TPN , 415 Volts, 32 Amps, -01 Nos (e) Digital VAF meter for basic electric system monitoring-01 Nos. (f) Indicator lamp (RYB) (set of three) - 01 Set

S&F in repair TPN copper bus bar box, outdoor type of 200 A capacity mounted on porcelain bridge insulator for one incoming cable and 4 out going cable, housing in sheet metal enclosure of MS sheet 3.0 mm thick CRCA sheet and angle iron 40x40x6 mm frame, painted with two coats including arrangement for cable gland for incoming and outgoing cables, locking arrangement, suitable foundation/platform for mounting the FPB with space for complete all as specified and directed including the following switch gears: (a) MCCB 100 A FP, 10 KA (for incoming control)

Preparation of old painted surface above the planting depth and PCC coping of steel tubular LT pole of 09.00 metre length including MS clamps ,cable protection pipe bracket fitted with street light fittings etc by scraping with steel wire brush and applying two coats, of aluminium paint to external surface of poles MS cross arms MS clamp, cable protection pipe etc to give even shade including Zebra colour of painting from 1.5 mtr height from the top of coping/ bottom of pole as per site condition and numbering of poles complete all as specified and directed. Note: Zebra colour will be applied by synthetic enamel paint of black/yellow colour as approved in alternate layer of 30 cm height of each layer.

Preparation of old painted surfaces and removing dust and other deposited material by scraping from LT PCC poles of 09.00 metre length, cross arms brckets and applying 2 coats of aluminium paint to all steel surfaces, including MS clamps, cable protection pipe bracket fitted with street light fittings etc including Zebra colour of painting upto 1.5 mtr height from the top of coping/ bottom of pole as per site condition and numbering of poles complete all as specified and directed.

Supply and fix in repair energy efficient LED street light fitting of 45 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDS with secondary optics, efficacy 110/120 LPW, IP 66 protection aerodynamically designed for all weather conditions with efficient thermal management including 10 KV SPD complete all as specified and directed. Model: RAPTOR NEO Cat No : TRP-409-45-57-SL-GL-NSG of make CG or techno commercially equivalent model of Havells, Bajaj, Wipro, Halonix

Supply and fix in repair energy efficient LED street light fitting of 60 watt made up of pressure die cast aluminium housing with toughened glass and high power LEDS with secondary optics, efficacy 110/120 LPW, IP 66 protection aerodynamically designed for all weather conditions with efficient thermal management including 10 KV SPD complete all as specified and directed. Model: RAPTOR NEO Cat No: TRP-409-60-57-SL-GL-NSG of make CG or techno commercially equivalent model of Havells, Bajaj, Wipro, Halonix

Supply and lay in repair LT service cable 6 sqmm 2 core inside PVC conduit 20 mm dia medium grade for landscape lighting/ garden lighting inside trench or on wall/floor complete all as specified and directed. Note: The rate quoted must be inclusive of laying the cables in trench at max 10 cm depth or mounting on floor/wall.

S&F in repair Integral compact wide beam LED flood light luminiaire with die cast aluminium alloy housing with IP 66 protection, tampered protective toughened glass 5mm thick, thermal shock impact resistant cover, epoxy black powder coated finish, high purity pre-anodised specular aluminium sheet reflector, with silver painted contacts suitable for 1x100 Watts LED and connection with two runs of 2.5 Sqmm multi-stranded, copper flexible wire including taking down old unserviceable one and testing complete as specified and directed. Make: Cat No LHEPCZU7PA6J100 of Havells or techno commercially techno commercially equivalent of Wipro and Crompton.

Supply and fix in repair LED post top lantern of 45 W, IP 65 protection with in built electronic driver and aluminium housing in pure polyster UV resistant powder coated black finish, top maintainable product with top opening die cast cover , anti corrossive stainless steel screws & silicon gasket, HET PMMA diffuser conforming to IS 10322 Part 5/Sec 1: 1987, suitable for pole diameter up to 75 mm, cable entry through pole from bottom, 3 way 10 Amps GFP mains connector duly wired upto terminal block complete all as specified and directed. Make Wipro Cat part No: LP07-501-XXX-57-CL or techno commercially equivalent in Bajaj, Crompton, Havells, halonix.

Supply and fix in repair GI pipe bracket for street light fittings made out of 32 mm dia GI pipe light grade 1.5 mtr long bent to required angle/ shape with and including necessary clamps, nuts, bolts, & washers of suitable size complete all as specified and directed.

S&F in repair PVC weather proof loop-in loop-out box with 4 pole terminal block mounted on porcelain or bakelite and MCB SP 06 Amps for controlling including necessary clamps for mounting on pole etc complete all as specified and directed. Make: Sintex Cat Part No-GSJB 2014 or techno commercially techno commercially equivalent.

Supply, jointing and testing in repair cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25-50 Sqmm complete all as specified and directed.

Supply, jointing and testing in repair cable jointing kit for 1.1 KV grade cable for outdoor termination heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70-150 Sqmm complete all as specified and directed.

Supply, jointing and testing in repair cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 25-50 Sqmm complete all as specified and directed.

Supply, jointing and testing in repair cable jointing kit for 1.1 KV grade cable for straight through heat shrink type joint complete with jointing material and accessories suitable for 3.5 core XLPE armoured aluminium conductor cable of size 70-150 Sqmm complete all as specified and directed.

S&F Indicator lamp, LED type of colour red, blue and yellow including taking down existing old/unserviceable lamps from LT panel /APFC Panel board after carefully disconnecting the electric connection complete all as specified and directed.

S&F MCCB, 415 volts, 400 Amp, breaking capacity 36 KA, 4 pole including taking down existing old/unserviceable MCCB from LT panel /APFC Panel board after carefully disconnecting the electric connection complete all as specified and directed

S&F MCCB, 415 volts, 250 Amp, breaking capacity 25 KA, 4 pole,including taking down existing old/unserviceable MCCB from LT panel /APFC Panel board after carefully disconnecting the electric connection complete all as specified and directed

S&F MCCB, 415 volts, 200 Amp, breaking capacity 25 KA, 4 pole, including taking down existing old/unserviceable MCCB from LT panel /APFC Panel board after carefully disconnecting the electric connection complete all as specified and directed

S&F MCCB, 415 volts, 160 Amp, breaking capacity 16 KA, 4 pole including taking down existing old/unserviceable MCCB from LT panel /APFC Panel board after carefully disconnecting the electric connection complete all as specified and directed

S&F MCCB, 125 Amp, 415 volts, breaking capacity 16 KA, 4 pole, including taking down existing old/unserviceable MCCB from LT panel /APFC Panel board after carefully disconnecting the electric connection complete all as specified and directed.

S&F MCCB, 100 Amp, 415 volts, breaking capacity 10 KA, 4 pole, including taking down existing old/unserviceable MCCB from LT panel /APFC Panel board after carefully disconnecting the electric connection complete all as specified and directed.

Supply & Fix in repair off load change over switch 4 pole of capacity 200 Amps in sheet steel enclosure rated voltage 415 V AC 50 Hz including connecting up the cables with suitable lugs complete all as specified and directed Make INDOASIAN Cat part no OCFP0200 or techno commercially equivalent in L&T, Havells, C & S etc.

M/S Tanisha Traders

M/s Malinath Electricals