Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹31.8 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹34.3 L+₹2.4 L (7.55%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹38.0 L+₹6.1 L (19.1%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹38.1 L+₹6.2 L (19.4%)Rejected-Finance | L4 | Rejected-Finance Being L4 |
Tender Value
₹38.5 L
EMD Value
₹77,000
Closing Date
24 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GARRISON ENGINEER NAVY LKD
Military Engineer Services GE(NAVY) Lakshadweep Kavaratti, UT of Lakshadweep
ADDITION ALTERATION TO BUILDING NO P 37 VIP ANNEX AND PROVISION OF PARKING SHED NEAR ROS BUILDING AND GEMINI STORE UNDER AGE B R 1 KAVARATTI OF GE NAVY LAKSHADWEEP
2022_MES_541739_1
8332E8
Open Tender
Civil Works
Item Rate
180 days
GARRISON ENGINEER NAVY LAKSHADWEEP
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
Yes
GARRISON ENGINEER NAVY LAKSHADWEEP
₹77,000
Yes
26 Dec 2022
29 Jul 2022
27 Aug 2022
29 Jul 2022
24 Aug 2022
10 Aug 2022
29 Jul 2022 - 9 Aug 2022
60 days
Amount
Demolition / dismantling Brickwork or stone/ boulder PCC Block masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition complete all as specified and as directed by Engineer-in-Charge.
Demolition of cement concrete (un-reinforced) in ground floors and pavings n. exc. 15cm thickness (below or above ground level) complete all as specified and as directed by Engineer-in-Charge.
Material and labour Pre -cast cement concrete block masonary with solid blocks exc 10 cm in width type C-1 1:3:6 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour Pre -cast cement concrete block masonary with solid blocks not exc 10 cm in width type C-1 1:3:6 (20mm graded aggregate) set in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.
Material and labour 1:2:4 nominal mix ( 20mm graded aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed by Engineer-in-Charge.
Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) fair finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour 1:2:4 nominal mix ( 20 mm graded aggregate) as in Roof Beams cantilevers, bressummers lintel over 1.5 m span etc. complete all as specified and as directed by Engineer-in-Charge.
Material and labour for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. fair finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
S/F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed by Engineer-in-Charge.
All as per item no. 10 but 6 to 8mm dia as in stirrups and spaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for 16-18mm thick polished Granite (of any type) work as a window cill, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marbel dust wilth admixture of pigment to match shade of granite including and over 15mm thick screed bed in 1:4 CM complete all as specified and as directed by Engineer-in-Charge.
Material and labour 25 mm thick PCC 1:2:4, type B-1(20 mm graded aggregate) in flooring complete all as specified and as directed by Engineer-in-Charge.
Material and labour non skid glazed ceramic tiles 7 to 8 mm thick (Square/rectangular) are of each tile exceeding 0.06 Square Meter but not exc 0.11 Square Meter, in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:4) complete all as specified and as directed by Engineer-in-Charge.
Material and labour Glazed ceramic Desginer/ concept tiles coloured of size 300 x 450 x 7mm laid on vertical surface set and jointed in neat cement slurry and pointed in white and colour cement to match over 10mm thick cement plaster in 1:4 CM complete all as specified and as directed by Engineer-in-Charge.
Material and labour for vitrified tiles10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 Square Meter in floors and skirting etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement incl screed bed or bedding layers of mortars 15 mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed by Engineer-in-Charge.
Material and labour for vitrified tiles10 mm thick ( Square or rectangular) polished, area of each tile exceeding 0.36 Square Meter in skirting/dado/risers of steps etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement. incl rendering 10mm thick in CM (1:4) and finished rough, incl taking down cement plaster on walls etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering 15mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished even and smooth without using extra cement including mixing of water proofing compound complete all as specified and as directed by Engineer-in-Charge. (Note: WPC will be measured and paid seperately)
Supply only liquid water proofing compound complete all as specified and as directed by Engineer-in-Charge.
Material and labour applying for exterior emulsion weather proof paint (Appex Ultima or equivalent) of any colour two coats over a coat primer, over a coat of cement based exterior putty not less than 1mm thick on wall column projection, chajjas sides and bottom etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Complete removal of existing treatment and washing ,rubbing down and stopping of old colour washed/distempered wall /chajja surfaces including brooming down or steel wire brushing and scrapping down smoke soot,mould moss , efflorescent salts ,trading oil and greasy spots including washing with water and applying two coats of antifungal exterior emulsion weather proof paint over a coat of 1mm thick cement based exterior wall putty and over a coat of exterior wall primer on walls, column projection, chajja complete all as specified and as directed by Engineer-in-Charge.
Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed by Engineer-in-Charge.
Material and labour Rendering 10mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.
Material and labour Preparation of newly plastered or unplastered surfaces on walls and applying three coats of white wash complete all as specified and as directed by Engineer-in-Charge.
Preparation of new plastered surface of wall by applying two coats thick wall care putty and making the surface smooth and applying two coat of oil emulsion distemper complete all as specified and as directed by Engineer-in-Charge.
Material and labour two coats of Oil bound distemper on old surface of wall including preparation of old plastered surface complete all as specified and as directed by Engineer-in-Charge.
Supply and fix solid PVC door frame of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with MSD square tube etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix factory made solid PVC moulded door shutter, 30 mm thick (stiles) with 4 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face with particle board core complete all as specified and as directed by Engineer-in-Charge.
Material and labour for Door frame/Chowkats in 2nd class hardwood, plain, solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glue painted at joints and additional rebate for fixing second shutter complete all as specified and as directed by Engineer-in-Charge.
Material and labour 18/19mm thick Pre-laminated board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination , fixed with screw to timber frame complete all as specified and as directed by Engineer-in-Charge.
Material and labour cover fillet(lipping) of tempered hard board 19/18mm wide , 6mm thick and fixing with screw complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 150mm hasp and staple, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screw complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium , anodised, barrel tower bolt of extruded section and fixed length of bolt 150mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium alloy , anodised sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy & fixed length of bolt 300mmcomplete all as specified and as directed by Engineer-in-Charge.
Supply and fix floor door stopper of aluminimum alloy body and tongue,, anodised with hard drawn steel spring fixed in floor, overall length of cover plat 140mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix aluminium handles cast type anodised, size of handle 150mm complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 100mm long Butt hinges, stainless steel hinge pin, bright polished complete all as specified and as directed by Engineer-in-Charge.
Material and labour prepapration of new or previously untreated surfaces of wood or based materials of any description not otherwise described over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Anodised aluminium frame with power coated (minimum thickness of powder coating 50 micron) for doors, window ,ventilators & grills with one or more rebates inclunding joining cleat for fixing etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Anodised aluminium Door ventilators & windows shutters with power coated (minimum thickness of powder coating 50 micron) , aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws, rollers, door stoppers etc complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 4mm thick sheet glass ordinary quality glazing with clips and rubber beading complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints fixed to walls with and including clamps complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 75 mm dia PVC (SWR) bends any radius provided with access door complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvant cement incl necessary PCC & form work as required complete all as specified and as directed by Engineer-in-Charge.
Excavating in trenches n exc 1.5m wide and not exc 1.5m in depth for foundation and getting out in hard/dense soil all as specified and directed.
Returning, filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in hard/dense soil complete all as specified and as directed by Engineer-in-Charge.
Removing excavated material n exc 50m and depositing complete all as specified and as directed by Engineer-in-Charge.
Cutting into existing manholes for connecting new drains pipe 150mm dia, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC SWR pipe 110mm dia single socketed in any length laid in trenches or floor complete all as specified and as directed by Engineer-in-Charge.
Material and labour PCC (1:3:6) type C2 (using 40mm graded aggregate) as in bed to drain pipe , 110mm bore including packing under & hauching against the sides of pipes after they are laid tested including necessary shuttering and support to concrete complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for sinks made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1200mm x 460mm bowl size 410mm x 330mm x 160mm with waste copling and pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 20 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugs hose clips etc and fixing cutting through walls, floors and their making good or layilng in trenches and also cutting, screwing and wastge, Including taking down old pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fix 25 mm outer dia of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floor including all pipe fittings such as ends, elbows, unions, tee,reducing tees, adoptors, sockets, plugs hose clips etc and fixing cutting through walls, floors and their making good or layilng in trenches and also cutting, screwing and wastge, Including taking down old pipe complete all as specified and directed by Engr-in-Charge.
Supply and fix white Vitreous China wash down water closet (pedestal pattern) including black coloured plastic seat cover closet pattern with flat bottom and aluminimum hinging device excluding flushing cistern and connecting to existing out let pipe etc all complete all as specified and as directed by Engineer-in-Charge. Note :- Flushing cistern shall be measured and paid separately.
Supply and fix in repair PVC low level flushing cistern 10 ltrs capacity including all fitting i.e float valved, syphon , flushpipe, brackets complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for 15mm fancy type bib tap, chromium plated with crutch or butterfly handle, screwed down , screwed for iron pipe or for brass ferrule complete all as specified and as directed by Engineer-in-Charge.
Supply and fix PVC connections 15mm dia with brass nut on both ends and washers 450mm long complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for pillar taps chromium plated cast copper alloy with capstan heads screwed down high poressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipes 15mm dia complete all as specified and as directed by Engineer-in-Charge.
Supply and fix WHB, vitreous china, white, decorative type, flat or angle back, size 550mm x 450mm incliding cutting for and pinning in ends of brackets or erecting stand including waste pipe complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for CP Shower rose with or without swivel joints, any size,including fixing to steel pipe or union complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for Stop valve/ Angle valve cast copper alloy (ISI Marked) chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm bore dia complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for Stop valve concealed cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for Brass chromium plated Tubular towel rail 20mm dia D type, 60cm long between flanges complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Rotational moulded polyethlene water storage tanks of capacity 1000 litres three layers (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete including 25mm dia ball brass valve high pressure with polythene float complete all as specified and as directed by Engineer-in-Charge.
Material and labour for cement concrete (1:2:4) type " B1 " ( using 20 mm graded stone aggregate) as seismic, plinth and similar bands, coping, kerbs, cills, steps, parapets, apex stones, bed plates, kerbs, railings up to 60 cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed by Engineer-in-Charge.
Material and labour Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh Fillets, metal frame work complete all as specified and as directed by Engineer-in-Charge.
Material and labour two coat of Plastic emulsion paint of ceiling surface of any description over 10 cm girth or width not other wise over a coat of alkali resistant priming pait and 3 mm putty on ceilling surface complete all as specified and as directed by Engineer-in-Charge.
Point wiring with PVC insulated unsheathed and multistranded copper conductor cable ISI marked, 1100 volt grade. FRLS of size 1.5 Sqmm drwan in and including concealed PVC rigid conduite of size not less than 20mm dia with modular metal flush box concealed and modular white plates with frame of suitable size as required at site with PVC insulated unsheathed stranded copper conductor of size 1.5 Sqmm as earth wire connected common earth dolly as specified for one light point controlled by one switch for light/Fan complete all as specified and as directed by Engineer-in-Charge. Note : (i) Rate quoted should include cost of modular metal flux box concealed and making good walls. (ii) Rate include the modular white cover plate with frame. (iii) Necessary blank plate as required at site.
All as per item No 70 here in before but one 3 pin 5 amps switch sockets on same board complete all as specified and as directed by Engineer-in-Charge.
All as per item No 70 here in before but one 3 pin 5 amps switch sockets on independent board complete all as specified and as directed by Engineer-in-Charge.
All as per item No 70 here in before but with cable size 2.5 Sqmm and 2.5 Sqmm as earthwire for 3/5 pin socket out let independent, 15/16 Amps complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular switch 1 way, 6A, 1 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular socket, 6A- 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular switch Socket 6A/16A - 2/3 pin combined 2 module, complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular socket, 6/16A- 2/3 pin combined 2 module complete all as specified and as directed by Engineer-in-Charge.
Supply and fix modular fan regulator 120 watt, 2 module, hum free complete all as specified and as directed by Engineer-in-Charge.
Supply and fix ceiling rose three terminals polycarbonate isolated body complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Fully diffused square type recessed mounted 2'X2' LED luminaire with high transmitive diffuser with lumen output of 3000 lm including all connection complete all as specified and as directed by Engineer-in-Charge. Make: Philips cat part no RC380B LED30S-6500 G5 L60W60 PSU OD or equivallednt in Havells/CG/Wipro.
Supply and fix round type ultra sleek LED recessed down light with lumen output of 1000 lm including all complete all as specified and as directed by Engineer-in-Charge. Make: Philips cat part no DNO92B LED10S-6500 PSU WH or equivallednt in Havells/CG/Wipro.
Supply and fix LED light fitting 1x9W/1X10W bulk head luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed by Engineer-in-Charge.
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor including all connection complete all as specified and as directed by Engineer-in-Charge.
Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm including all connection complete all as specified and as directed by Engineer-in-Charge.
Supply and fix MCB DB, SPN 12 way, double door, SPN 240 V with 200 A bus bar and separate link for common link for neutral and earth including all connection complete all as specified and as directed by Engineer-in-Charge. Note : Blank spaces of DB shall be covered with blank plate.
Supply and fix RCBOs double pole 300 mA of capacity 40 A for earth leakage ,overload - circuit protection including all connection complete all as specified and as directed by Engineer-in-Charge.
Supply and fix MCB SP 5 to 40 Amp, 240 V, B series complete all as specified and as directed by Engineer-in-Charge.
Supply and laying of submain wiring with Two runs of 4.0 Sqmm size multi stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metalic conduit and one run of PVC insulated cable of size 4.0 Sqmm size multi stranded copper conductor PVC insulated and unsheathed for contineous earth wire including all connections complete all as specified and as directed by Engineer-in-Charge. Note: 2 Runs of cable, one run pvc conduit and one run of earth wire shall be measured as one RM length.
Supply and laying of Submain wiring with Two runs of 6.0 Sqmm size multi stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metalic conduit and one run of PVC insulated cable of size 6.0 Sqmm size multi stranded copper conductor PVC insulated and unsheathed for continous earth wire including all connections complete all as specified and as directed by Engineer-in-Charge. Note: 2 Runs of cable, one run pvc conduit and one run of earth wire shall be measured as one RM length.
Supply and fix Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 A complete all as specified and as directed by Engineer-in-Charge.
Earthing complete with galvanised steel earth plate electrode 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised iron strip 32×6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion and complete all as specified and as directed by Engineer-in-Charge.
Supply and fix Invertor type split air conditioner, with indoor & outdoor units complete fixing on wall with necessary brackets nuts bolts, including making hole on wall for Refrigerant copper pipe, making good the disturbed surface matching to the existing wall colour suitable to indoor and outdoor units, with cordless remote control unit and with inbuilt air ionizer and plasma filter for better indoor air quality with minimum 5 star rating of capacity 1.5 Ton complete all as specified and as directed by Engineer-in-Charge. Make: Panasonic CU-XU18XKYF, White or Equivalent in Voltas/Blue star/Hitachi/Lloyd, LG.
Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as specified and as directed by Engineer-in-Charge.
Excavation post holes or similar works, each n exc. 0.5 Cubic Meter, getting out Soft/loose soill. Returning,filling in and ramming earth or broken rubble mixed with earth around, in layersn.exc. 25 cm and watering and removing surplus soil to adistance not exceeding 50m and making good surfaces complete all as specified and as directed by Engineer-in-Charge.
Material and labour for plain cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and as directed by Engineer-in-Charge.
Material and labour RCC 1:2:4 nominal mix type B1( using 20 mm graded aggregate) as in foundation including rafts footing, beams, plinth beams, base for columns. etc. complete all as specified and as directed by Engineer-in-Charge.
Use and waste of form work to sides of concrete foundation, footing, base of columns rafts and raft beams sides and soffits (if any) of foundation and plinth beams and similar work verticale or to bater, fair finished surfaces of concrete complete all as specified and as directed by Engineer-in-Charge.
Supply and fix GI flat ,angle, round pipe,hollow pipe square & rectangle for vertical post, truss, purlins, wind ties; plain angle cleats for securing purlins to trusses or rafters; plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, knee piece inserts; two way and three way straps, plate washers and similar small articles with fabrication including GI bolts complete all as specified and as directed by Engineer-in-Charge.
Supply and fix for 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap of any colour and shape as approved by GE fixed to frame with and including coach screws/ self tapping screws with necessary over lapping and end lapping all as per manufactures instructions complete all as specified and as directed by Engineer-in-Charge.
Material and labour for preparation of newly welded surfaces GI steel surfaces of any description by suitably scrapping and removing loose, spalled and corroded steel pieces completely, exceeding 10 cm in width or girth and applying two coats of fusion bonded epoxy enamel paint, in any tint, over a coat of epoxy primer complete all as specified and as directed by Engineer-in-Charge. Make: Berger Paints (Epilux) or equivalent in Asian Paints/Nerolac Paints/Shalimar paints/Dulux Paints as approved by GE
Dismantling of floor, hearth or wall tiling incl cement mortar bedding & backing coat and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge.
Material and labour chequered cement concrete tiles with grey cement and pigments of size 30cmx30cmx25mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match including 15 mm thick screed bed or bedding layer with CM 1:4 complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully existing aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power) complete and making good the disturbed surfaces of walls, floors, ceiling rose to match with existing complete all as specified and as directed by Engineer-in-Charge.
Taking down carefully by unscrewing from boards/outlet boxes, fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, brackets, ceiling fittings, bulk head fittings, tube light fittings and regulators etc for reuse at site or carrying to the store (to be measures only when found serviceable) complete all as specified and as directed by Engineer-in-Charge.
Supply and fix LED tube light fitting of 22 W with lumen output of 2200 lm including all connection complete all as specified and as directed by Engineer-in-Charge. Make: Philips cat part no BN 021 LED 22S 6500/4000 PSU GR/SI
Supply and fix LED tube light fitting of 12 W with lumen output of 1100 lm including all connection complete all as specified and as directed by Engineer-in-Charge. Make: Philips cat part no BN 021 LED 12S 6500/4000 PSU GR/SI
Supply and fix SPN DB 4 way double door type 415 V with 200A bus bar and seperate link for common link for neutral and earth including all connection complete all as specified and as directed by Engineer-in-Charge. Note : Blank spaces of DB shall be covered with blank plate.
Supply and fix RCCB SPN 30 Amp, 240 V, 400 mA earth leakage current complete all as specified and as directed by Engineer-in-Charge.
Material and labour Submain wiring with Two runs of 2.5 Sqmm size multi stranded copper conductor PVC insulated unsheathed cable (FRLS) in and including PVC rigid non metalic conduit and one run of PVC insulated cable of size 2.5 Sqmm size multi stranded copper conductor PVC insulated and unsheathed for continious earth wire including complete all as specified and as directed by Engineer-in-Charge. Note: 2 Runs of cable, one run pvc conduit and one run of earth wire shall be measured as one RM length.
R.K. Builders
STANDARD ENGINEERING
V A ABDUL RAHEEM DESIGNERS & CONTRACTORS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .