Improvements to road and drains at Chidambaranar Street, Sengeniamman Nagar, Orleanpet Constituency, Puducherry.

Amount

Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50m - all kinds of soil

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement:2coarse sand : 4 graded stone aggregate 20mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement:5coarse sand :10 graded stone aggregate 40mm nominal size

Centering shuttering including struttings, propping etc. and removal of form work for foundations, footings , bases for columns.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plinth level - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)

Steel reinforcement for R.C.C.work including straightening , cutting, bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (ISI BRAND OF APPROVED MAKE) Fe - 415 or more

Providing and fixing in position 12mm thick bitumen impregnated fibre board conforming to IS : 1838 including cost of primer , sealing compound in expansion joints

6mm cement plaster of mix :Cement mortar 1:3 (1 cement : 3 fine sand)

Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead - Nominal concrete 1:3:6 or richer mix (including equivalent design mix)

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50mm thick compacted bed of course sand , filling the joints with coarse sand etc. all complete

Disposal of debries / surplus excavated earth including loading, unloading and conveyance to low lying areas with in 2km lead as directed by the Engineer-in-charge.

Supply of Quarry rubbish including stacking to department gauge for premeasurement and spreading required thickness

Raising of various types of manholes and flushing tank by cutting alround the manhole cover, removing the frame and cover from the manhole by cutting the B.T., W.B.M., surface, raising the manhole to the required height with brick work in cement motar 1:4 (One cement and four sand), refixing the frame in position by laying cement concrete 1:1.5:3 (One cement one and half sand and three 20mm HBG metal) including curing, but excluding the cost of reinforcement, finishing the top, inside and outside plastering with 20mm thick in cement mortar 1:3(one cement three sand), the rate includes all materials, providing barricading,caution board, watch and ward etc.,complete till the completion of work with minimum hindrance to the traffic.- 30cm height.

Providing,laying , spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to ste, laying in uniform layer by manual ans in sub-base / base course on well prepared surface and compacting with smooth 3 wheeled steel roller to achieve the desired density.

Fabrication, supply and fixing of village/informatory name board of size 1.00mtsx0.61mts. The width of the board is tempered at 0.80mtrs upto 1.06mtrs to give the triangular shape at one End with high intensity reflective sheeting Of required colour encapsulation on aluminium sheet of not less than 2.00mm thick suitably supported and framed with mmx3mm AISI 316 grade stainless steel angle and the board frame is supported alround with AISI 316 grade stainless steel pipe of 38.10mm dia (outer dia & 2mm wall thickness).The village names / street names, Lettering and symbols will be provided by high intensity grade while sheeting. The board is supported by 2Nos., of 63.5mm dia post S.S. pipes of 2.0mtrs.height with same dia dummy plate arrangement at the top. The board frame and post pipes are welded by Tig Welding with necessary polishing etc., and M.S. pipes of 50mm dia for a length of 35cm will be welded at size 0.45x0.45x0.50mtrs. with P.C.C. 1:2:4 rate including all the materials, S.S.welding,grinding, polishing, fabrication charges, conveyance etc., except earth work and PCC charges, complete.

C MOGANASOUNDIRAME

S Sakthivel