REPAIRS TO SEEPAGE, WALL PLASTER, JOINERY, PLUMBING,PERIODICAL SERVICES AT VARIOUS BILLETS AT MAIN CAMP AND GJ AREA AT AF STATION TAMBARAM

Amount

Taking down old cement plaster including racking out joint hacking for keys and scrubbing down with water etc., on wall,ceiling etc all as specified and directed.

M&L for rendering 15mm thick in CM 1:6, finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 10mm thick in CM 1:4, finished even and smooth without using extra cement all as specified and directed.

M&L for rendering 5mm thick in CM 1:3 on ceiling surfaces, finished even and smooth without using extra cement all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying three coats of white wash on wall complete all as specified and directed

M&L for preparation of newly plastered surfaces and applying two coats of OBD over a coat of alkali resistance primer on wall complete all as specified and directed

M&L for preparation of newly plastered surfaces and applying three coats of white wash on ceiling/ facia complete all as specified and directed

Demolition cement concrete ( unreinforced )concrete in ground floors and pavings not exc 15 cm thickness (below or above ground level) as directed.

M&L 75 mm thick PCC type B-1, (1:2:4) using 20mm graded stone aggregate finished even & smooth without using extra cement as in plinth protection all as specified and directed

M&L 40mm thick PCC type B-0, (1:2:4) using 12.5mm graded stone aggregate as in flooring fnished even and smooth using extra cement all as specified and directed

Dismantling floor hearth or wall tiling including cement mortor bedding (but not backing) removing the rubbish of the premises all as specified and directed

M&L Non skid ceramic coloured tiles 6-7 mm thick (square/rectangular) area of each tile exc 0.06sqm but not exc 0.11Sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed plaster in CM 1:6 all as specified and directed

M & L glazed ceramic coloured tiles of size 300x450x7 or 450x350x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and directed

M&L non skid ceramic coloured tiles 7 to 8 mm thick (Square/ rectangular ) in floors ,area of each tile exc 0.11 sqm but not exc. 0.18 sqm set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles, over and including 15 mm thick screed plaster in CM 1:6 complete all as specified and directed

Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc, laid bedded and pointed in any cement mortar all as specified and directed

M&L Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 20mm thick screed bed in CM 1:4 all as specified and directed

Taking down chowkats/frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each all as specified and directed

All as per item No 17 above but area exc 1.5 Sqm & not exc 4 Sqm

Resecuring or easing & adjusting without taking down of shutters of any description area not exc. 1sqm each all as specified and directed

Resecuring or easing & adjusting without taking down of shutters of any description area exc. 1sqm and not exc 2sqm each each all as specified and directed

S&F 2nd class Hard wood plain, solid, straight chowkats and frames wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joint all as specified and directed

S&F 2nd class Hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats as directed.

All as per item No.22 here in before but with or without sash bar of size 25mm thick for window and the like all as specified and directed

S&F 2nd class hard wood plain framed panelled shutter 30mm thick (any number of panel) with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers of ply wood commercial type all as specified and directed

S&F flush shutter 30mm thick Solid core construction with Block board and plywood face pannels, commercial type on both sides all as specified and directed .

S&F Extruded aluminum alloy with galvanised MS hinge pin anodised of size 100mm type B-21

S&F Extruded Aluminium alloy handle fabricated type, anodised of size 150mm

S&F Aluminium anodised barrel tower bolt of extruded section of size 150mm

S&F in floor door stopper 140 mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring in floors.

S&F Aluminium alloy, anodised sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolt of extruded section or cast alluminium alloy .

M&L for preparing new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of wood primer all as specified and directed

Taking down of mild steel grills and refixing in the same opening as directed.

M&L for preparing new Steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and as directed

S&F in repairs Stainless steel wire mesh of nominal dia of wire 0.36mm and average width of aperture 1.40mm including wooden fillets/beadings, screws etc complete all as specified and as directed

Hacking out old broken glasses any thickness size, quality or description from steel/wooden frames fixed with putty or with beads all as specified and directed

S&F 3mm thick plain ordinary glass fixed in squares not exc 0.5 Sqm in each panes with wooden beading or glazing putty all as specified and directed

M&L Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks & similar work conforming to Fe 290-0 Gde E-165 all as specified and directed

S&F in repairs Mild Steel 300mm size ordinary rat tail rod patttern springs including roller & roller plate complete.

S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed

M&L Preparation of new steel surfaces and applying one coat of red oxide primer and two coats of synthetic enamel paint complete all as specified and as directed

M&L Preparation of old steel surfaces and applying two coats of synthetic enamel paint complete all as specified and as directed

Cutting out old steel hinges (projecting type) friction or non friction type from existing windows and S&F new hinges and welded, including cutting out and making good the jamp portion where required and applying two coats of synthetic enamel paint over a coat of red oxide primer to hinges and disturbed portion etc., complete all as specified and as directed

S& F in repairs new steel handles for existng steel wondows by welded, including cutting out and making good the concern portion where required and applying two coats of synthetic enamel paint over a coat of red oxide primer to handles and disturbed portion etc., complete all as specified and as directed

M&L for easining / straightning of shutters frame of steel windows of any type and making functionable including greasing to hinges all as directed. Note: welding and painting shall be measured and paid separately

M&L running welding in repairs not exceeding 6mm thick metal sheets such as devotailed hinges, peg stay assembly and MS butt hinges etc., with steel window and steel frame of doors as directed.

Taking down PVC chowkats/Frames of area not exc 1.5 Sqm with shutter (without taking off shutters from the frame) each.

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification & drawing all as specified and directed

S&F Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tube for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the style & rails with suitable PVC sheet beading, and jointed together with solvent cement,supplying & fixing in the frame at site as per specification and drawing all as specified and directed

S&F 100 mm long stainless steel butt hinges

Taking down GI steel tubing and connections, 15mm bore including cleaning for refixing or removal to store all as specified and directed

Taking down GI steel tubing and connections, 20 bore including cleaning for refixing or removal to store all as specified and directed

Taking down GI steel tubing and connections, 25 bore including cleaning for refixing or removal to store all as specified and directed

S&F UPVC pipes of 15mm bore with pressure rating 10 Kgf/ sqcm with all fitting and fixed complete to walls and ceilings all as specified and directed

S&F UPVC pipes of 20mm bore with pressure rating 10 Kgf/ sqcm with all fitting and fixed complete to walls and ceilings all as specified and directed

S&F UPVC pipes of 25mm bore with pressure rating 10 Kgf/ sqcm with all fitting and fixed complete to walls and ceilings all as specified and directed

S&F in repairs 15 mm bore CP Bib tap cast copper alloy fancy type crutch or butterfly handles screwed down for iron or for brass ferrule all as specified and directed

S&F in repairs 15 mm bore pillar taps cast copper alloy fancy type chromium plated screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes all as specified and directed

S&F in repairs 15mm dia chromium plated fancy type angle/stop cock cast copper alloy screwed down high pressure fancy screwed both ends for pipe or for union all as specified and directed

S&F in repairs 15 mm dia Bip tap standard PTMT any colour screwed for iron pipe (Min weight 90 gms) all as specified and directed

S&F in repairs 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight 15mm-110gms) all as specified and directed

S&F in repairs 15mm dia Angle/Stop valve of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/ 20mm- 92gms) all as specified and directed

S&F in repairs PVC cover for PVC over head tank of any capacity

S&F in repairs Waste coupling of PTMT (half or full threaded) 32mm bore (Min wt 45gms)

S&F in repairs PVC connections 15mm dia 600mm long (for cold/hot water connection with brass or PTMT flynuts and washer at both ends

S&F in repairs 125mm size brass chromium plated shower rose with swivel joints and shower arm complete all as specified and directed.

S&F in repair brass chromium plated tubular towel rails 20mm dia D type 60cm long between flanges all as specified and directed

S&F in repairs three layered rotational moulded polyethylene water storage tanks 2000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F in repairs three layered rotational moulded polyethylene water storage tanks 1000 lit capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed

S&F in repairs EWC seat cover White flat bottom solid with CP hinging device, nuts & bolts etc complete

S&F in repairs PVC valve less syphonic action type flushing cistern 10 litres capacity, high/low level with inlet ball valve, float and handle including brackets all as specified and as directed

S&F in repairs Ball valves of High pressure of PTMT with epoxy coated with aluminum rod & high density plastic ball 20mm inside flushing cistern( min wt - 142gms)

All as per item No.73 above, but 25mm dia (min wt - 455 gms)

Cleaning of tank by removing of all scale and dirts etc from tank and mouth of circutary pipe 500 ltr and above but not exc 1000 Ltrs capacity including writing the date of cleaning and due date of leaning on each tank as directed.

All as per item No.75 above but exc 1000 ltr but not exc 2000 ltrs

S&F in repairs vitreous china urinal, Half stall type, white (excluding flushing cistern, flush pipe and waste pipe) fixed to wall with CP brass screws all as specified and as directed

S&F in repairs vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and unionfor discharge pipe (excluding flushing cistern, flush pipe and waste pipe) all as specified and as directed

S&F in repairs flush pipe of polyethylene of low or high density or PVC 32 mm dia, for low / high level flushing cistern

S&F in repairs Swivel shower of PTMT any colour for fixing with 15mm pipe (min weight 40 gms)

Taking down rain water pipes, waste/soil pipes (any size or pattern), including all fittings, heads, shoes, bends, swan necks, etc including cleaning or refixing or removal to store all as specified and as directed

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors all as specified and as directed

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joint laid in trenches or in floors all as specified and as directed

S&F 75mm dia PVC (SWR) bend without access door

S&F 110mm dia PVC (SWR) bend without access door

S&F 75mm dia PVC (SWR) bend with access door

S&F 110mm dia PVC (SWR) bend with access door

S&F in repair viterous china WHB flat back of size 550x400mm incl GI Brackets, CP brass waste coupling with check nut and washers of suitable to be complete all as specified and as directed

S&F In repair viterous china water closet pedestal pattern with P or S trap including connection to flush and water pipe etc complete all as specified and as directed

S&F in repairs Vitreous china squatting pan orissa pattern size 500x440mm white with integral foot rest (excluding flushing cistern and flush pipe ) and making good to floor all as specified and as directed

S&F in repairs toilet paper holder of brass, chromium plated fixed to walls with chromium plated brass screws.

S&F in repairs brass, chromium plated soap dish fixed to walls with chromium plated brass screws.

S&F in repairs chromium plated urinal spreader

S&F in repairs chromium plated health faucet with 1 mtr steel tubing fixed all as specified and directed.

S&F in repairs Internal components part (except PVC body) of PVC Flushing cistern 10 Ltr capacity incl ball valve etc complete (Flush Kit)

M&L for preparation of old decorated surfaces of walls, pilasters including cornices and applying one coat of white wash evenly complete all as specified and directed.

M&L for preparation of old decorated surfaces of ceiling and applying one coat of white wash evenly complete all as specified and directed.

DELTA CONSTRUCTIONS

kcs builders