Loading
Loading…
Loading…
Tender Value
₹10.4 L
EMD Value
₹20,800
Closing Date
14 Aug 2026, 11:00 am
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (WMS)
Above/Below/Par
TENDER
13 conditions · 2 needing a document upload
No Technical and Financial credentials are required for tenders having advertised value up to Rs. 50 lakhs.
No Technical and Financial credentials are required for tenders having advertised value up to Rs. 50 lakhs
10 conditions · 9 needing a document upload
Documents to be Submitted Along with Tender (i)The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society / Registered Trust / HUF etc. The tenderer(s) shall enclose the attested copies of the constitution of their concern, and copy of PAN Card along with their tender. Tender Documents in such cases are to be signed by such persons as may be legally competent to sign them on behalf of the firm, company, association, trust or society, as the case maybe. (ii)Following documents shall be submitted by the tenderer: (a)Sole Proprietorship Firm: (i)All documents in terms of Para 10 of the Tender Form (Second Sheet)
Following documents shall be submitted by the tenderer: if Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet)
Following documents shall be submitted by the tenderer: if Registered Society & Registered Trust: The tenderer shall submit: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents and create liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)
The following documents shall be submitted by the partnership firm, with the tender: (i) A notarized copy of the Partnership Deed or a copy of the Partnership deed registered with the Registrar. (ii) A notarized or registered copy of Power of Attorney in favour of the individual to tender for the work, sign the agreement etc. and create liability against the firm. (iii) An undertaking by all partners of the partnership firm that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP in which they were / are partners/members. Any Concealment / wrong information in regard to above shall make the bid ineligible or the contract shall be determined under Clause 62 of the Standard General Conditions of Contract. (iv) All other documents in terms of Para 10 of the Tender Form (Second Sheet)
Following documents shall be submitted by the tenderer: if LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet)
The schedule given in this NIT shall be read in conjunction with technical specifications ,scope of work, tender documents, special condition of contract and drawings given in the Tender document attached with this Tender.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The tenderer shall possess a valid Electrical contractor license issued by any state Government for carrying out electrical work of the voltage class (415V or above for this work).The Electrical licence shall be mandatorily uploaded in the IREPS website while submitting the bid without which the bid will be summarily rejected.
Provision of ACs along with allied works in Officer's Club, ORH, Hospital,Admin and Plant of RWF.
RWFPCEEELTD2026-2705
RWFPCEEELTD2026-2705
Open
Works - General
3 Months
Bengaluru Urban, Karnataka
₹0
₹20,800
23 Jul 2026
23 Jul 2026
31 Jul 2026
31 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 10,40,634.8 | ||
| — | 135.00 | — | — | ||
| Earth excavation for cable trench of size 750 mm depth X 300 mm width in all types Soil, laying of 90 mm HDPE pipe in the trench, laying of 2 run of 95 sqmm UG cable in HDPE Pipe and closing the cable trench as per Scope of Works. | — | — | — | 93,285 | |
| — | 70.00 | — | — | ||
| Cutting of road/concrete floor, earth excavation for cable trench of size 1000 mm depth X 300 mm width , laying of 63-90 mm HDPE pipe in the trench, laying of 2 runs of 50-95 sqmm UG cable in HDPE Pipe and closing the cable trench as per Scope of Works. | — | — | — | 56,000 | |
| — | 15.00 | — | — | ||
| Laying of 4core,50 sqmm,LT UG cable on wall surface & fixing the cable using 25x3mm MS flat clamp as per scope of works. | — | — | — | 1,950 | |
| — | 1.00 | — | — | ||
| Supply, installation, testing & commissioning of Feeder Pillar Box(FPB) outdoor type floor-mounted (water proof) IP 55 protection of suitable size fabricated with minium 1.6 mm thick sheet steel. The FPB shall be fitted & wired with following items. 250A MCCB, 25kA-01 No. 125A MCCB, 25kA-04 Nos., 63A TPN MCB, 10kA-02 Nos., 10A SP MCB-06 Nos., Multifunction energy meter- 02 Nos., 3 Phase LED indication lamps. Suitable size bus bar/wire as per the rating of all items in the panel shall be used for internal connections.The minimum size of the FPB shall be 1200mm x 500mm x 1500 mm. The panel shall be mounted on concrete foundation. The supply, installation, testing and commissioning of FPB shall be as per scope of works. | — | — | — | 1,81,500 | |
| — | 4.00 | — | — | ||
| Supply, erection of indoor type main distribution board consists of 63A TP MCCB, 25kA-01 No. 16A TPN MCB-06 Nos, all pre wired as per scope of works. | — | — | — | 2,60,000 | |
| — | 270.00 | — | — | ||
| Supply of 90 mm Dia, PN 6, PE 100 HDPE Pipe as per Scope of Works. | — | — | — | 73,062 | |
| — | 80.00 | — | — | ||
| Supply of 63 mm HDPE Pipe, PN 6, PE 100 Pressure rating as per scope of works. | — | — | — | 10,400 | |
| — | 8.00 | — | — | ||
| Supply of End termination kit suitable for 4 core 50 sqmm XLPE UG Aluminium cable and making cable end termination as per scope of works. | — | — | — | 12,024 | |
| — | 4.00 | — | — | ||
| Supply of End termination kit suitable for 4 core 95sqmm XLPE UG Aluminium cable and making cable end termination as per scope of works. | — | — | — | 7,196 | |
| — | 520.00 | — | — | ||
| Circuit Wiring: Supply, running, testing and commissioning of 6 runs, 4.0 sqmm multi- strand copper conductor PVC insulated 1100V grade wires from distribution board to switch cum socket for ACs in 25 mm PVC conduit pipe in open/concealed for power supply to ACs as per scope of works. | — | — | — | 2,79,240 | |
| — | 20.00 | — | — | ||
| Supply & fixing of hot dipped GI cable tray of size 100mm width x 50mm depth x 1.6 mm thickness as per scope of works | — | — | — | 13,380 | |
| — | 2.00 | — | — | ||
| Supply, installation and testing of earth pits with 3 mtr. length GI earth electrode pipe as per IS: 3043 and scope of work. | — | — | — | 34,097.8 | |
| — | 10.00 | — | — | ||
| Supply of GI Strip of size 25 mm X 3 mm as per scope of work | — | — | — | 1,400 | |
| — | 10.00 | — | — | ||
| Laying & connection of GI Strip of size 25 mmX 3 mm as per scope of work | — | — | — | 500 | |
| — | 50.00 | — | — | ||
| Providing and fixing uPVC pipes(25mm dia reclaimed pipe) as per SCH-40 ASTM-D- 1785 and including fixing the pipe with clamps at 0.75m spacing. This includes jointing of pipes & fittings with one step uPVC solvent cement as per scope of works. | — | — | — | 16,600 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
GCC_April-2022.pdf.pdf
ATTACHMENT
TenderForm1stSheet.pdf
ATTACHMENT
ANNEXURE.VA.pdf
ATTACHMENT
GCCcorrectionslips.pdf_compressed_1.pdf
ATTACHMENT
Tele_Cir_9-2023penaltyforCableCut.pdf
ATTACHMENT
TenderdocumenttACsRWF.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].