Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.0 LAccepted-AOC 212 B 8 PARDEWANPUR LAL BANGLA KANPUR 208007 | KANPUR | KANPUR NAGAR | UTTAR PRADESH | 208007 | L1 | Accepted-AOC Being lowest | |
| 2 | L2₹12.9 L+₹5,609 (0.44%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹15.6 L+₹2.7 L (21.3%)Rejected-Finance | L3 | Rejected-Finance Other than lowest | |
| 4 | L4₹15.8 L+₹2.9 L (22.4%)Rejected-Finance | L4 | Rejected-Finance Other than lowest | |
| 5 | L5₹16.3 L+₹3.4 L (26.7%)Rejected-Finance | L5 | Rejected-Finance Other than lowest |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
15 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) E/M CHAKERI KANPUR
GE(AF)EM CHAKERI
Repair/Maint of security light, perimeter light and other connected works at 7AFH Kanpur
2023_MES_614359_1
8635/E8
Open Tender
Civil Works
Item Rate
180 days
Area under GE(AF) EM Chakeri
AS PER TENDER DOCUMENT
9 documents required · 9 mandatory
₹500
GE (AF) E/M CHAKERI
₹50,000
Yes
17 Nov 2023
18 Aug 2023
21 Sept 2023
19 Aug 2023
15 Sept 2023
2 Sept 2023
Amount
Excavation in trenches n.exc. 1.5 m wide and n.exc.1.5m in depth for laying of XLPE insulated Cable including getting out in soft/loose soil all as specified & directed by Engr-in-Charge
Returning filling in and including spreading leveling watering and well ramming in layers not exceeding 25 cm in soft/loose soil all as directed by Engineer in Charge.
Removing excavated material n.exc. 50m and depositing where directed at a level n.exc 1.5 m above starting point all as directed by Engineer in Charge.
M&L for spreading & leveling dry clean Ganga sand in trenches for cushioning UG cable (15cm before laying of cable and 08 cm after laying of cable ) complete all as specified and directed. (Note: For payment purpose punned thickness of sand shall be measured)
M&L for sub class old size of Brick in trenches for cable protection of LT Cables with width equal to length of brick complete all as specified and directed.
S&F in replacement of 50 mm dia light grade galvanised steel tubing with all fittings and fixed to poles / walls with mild steel clamps, bolts, nuts and washers complete all as spefified and directed
M & L for boring through existing road with trench less method for passing of UG Cable all as directed by Engineer in Charge.
Supply and laying XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 25 sq mm 4 core ,laid in trenches /ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable / OH conductor all as specified and directed.
Supply and laying XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 16 sq mm 4 core ,laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable/OH conductor all as specified and directed.
Supply and laying XLPE insulated , screened, PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty with aluminium conductor 1100 volts grade cross sectional 10 sq mm 2 core ,laid in trenches/ducts /encased in GI pipe /fixed to pole including taking out of existing unserviceable cable/OH conductor all as specified and directed. Note for item No 8 to 10 :- (i) Excavation, earth work, sand cushioning, protection cover/GI pipe shall be measured and paid separately under respective item of Schedule 'A'. (ii) Layout of cable rout shall be mentioned in MB for record purpose.
Re laying of serviceable LT cable obtained of any size and discription in any position complete all as directed by Engineer in Charge. (i) Excavation, earth work, sand cushioning, protection cover/GI pipe shall be measured and paid separately under respective item of Schedule 'A'. (ii) Layout of cable rout shall be mentioned in MB for record purpose.
Supply and fixing Isolator 4pole 63 Amps,415 Volts all as specified and directed.
Supply and fixing Isolator 4pole 100 Amps,415 Volts all as specified and directed.
Supply and fixing Isolator 2 pole 40 Amps,220 Volts all as specified and directed.
S & F in replacement on load change over switch, 630 Amps, 4 pole with sheet steel enclosure, panel mounted type with fixing arragement in existing wall angle iron frame 50x50x4mm with welding work and PCC works etc including making electrical connections complete all as specified and directed.
S & F in replacement on load change over switch, 400 Amps, 4 pole with sheet steel enclosure, panel mounted type with fixing arragement in existing wall angle iron frame 50x50x4mm with welding work and PCC works etc including making electrical connections complete all as specified and directed.
Dismantling of existing change over switch including disconnection and connection of LT cable complete and supply fixing of off-load change over switch of capacity 200 Amp TPN with enclosure box including handle and other accessories all as specified & directed by Engineer in Charge.
Supply & fixing in replacement of ACSR conductor of any size including binding on existing HT/ LT system with 02 mm dia aluminium binding wire all as specified & directed by the Engineer-in-charge.
Supply, fixing, testing and commissioning in replacement of heat shrink type straight through jointing kit suitable for LT cable of size 10 Sqmm to 70 Sqmm, 3.5 to 4 core, XLPE insulated, PVC sheathed armoured 1100 volts grade all as specified & directed by Engineer in Charge.
All as per item no. 19 here in before but heat shrink LT end joints of size 6 sqmm to 16 sqmm
All as per item no. 19 here in before but heat shrink LT end joints of size 25 sqmm to 50 sqmm
S&F in replacement of MCCB of capacity 100 Amps 4 pole 50 Hz 415 V with rupturing capacity 25 KA and including necessary additional altration required for fixing of MCCB complete all as specified & directed by Engineer in Charge.
S&F in replacement of MCCB of capacity 63 Amps 4 pole 50 Hz 415 V with rupturing capacity 16 KA and including necessary additional altration required for fixing of MCCB complete all as specified & directed by Engineer in Charge.
Supply only LT PVC tape roll 3/4 inch size ISI marked of length 25/26 mtr of approved make.
S&F contactor MNX 40-2P of existing make/model suitable for street light timer including dismantling existing un serviceable from the timer assembly and making reconnection connection all as specified and directed by Engr in charge.
S&F timer digital type suitable for street light timer including dismantling existing un serviceable from the timer assembly and making reconnection connection all as specified and directed by Engr in charge.
M&L for in replacement of bus bar chamber, fixed on wall, 4 ways, 100 Amps ,415 V powder coated, water & vermin proof , IP-66 protection duly provided with front openable door incl provision of TPN copper bus bar heat shrinkable colored PVC sleeve coated for phase and neutral complete all as specified and directed.
M&L for in replacement of bus bar chamber, fixed on wall, 4 ways, 63 Amps ,415 V powder coated, water & vermin proof , IP-66 protection duly provided with front openable door incl provision of TPN copper bus bar heat shrinkable colored PVC sleeve coated for phase and neutral complete all as specified and directed.
M&L for earthing complete with galvanised or steel earth plate electrode of size 600x600x6mm thick burried directly in ground vertically ( to a depth not less than 2.25mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to strip 32x 6 mm size drwn throun 40mm GI light grade pipe with nuts, bolts , check nuts , washers, earth plate surrounded by packed layers of charcoal dust and common salt 15cm thick all around, top & bottom watering pipe 20mm bore of GI medium grade with funnel and wiremesh all as shown in electrical plate No. 3 of SSR -2009 Part-I and connecting to earthing test point,main switch board and testing on completion including PCC chamber concrete (1:3:6) type C-2 and RCC cover 75mm thick reinforced with mild steel TMT bar 8mm dia @ 150mm c/c both ways in cement concrete(1:2:4) type B-1 all as shown in electrical plate in No 3 of SSR(Pt-I)2009 and including providing earth identification plate (indicating earth test results, earthing number & date of earthing with black paint over white paint back ground) of 1.6mm thick welded with 25x25x5mm angle iron goruted in ground in PCC 1:3:6 type C2 complete all as specified and dirfected by Engineer-in-charge. Note:- up to 7.5mtr earth strip shall be deemed to be inclusive in quoted unit rate.
Supply and fixing/laying of galvanized iron strip of size 32x6 mm as earth continuity conductor provided in between earth test point terminal and upto the equipment incl nuts, bolts and washers complete all as specified and directed.
Supply and fixing in replacement of danger notice plate of 1.6mm thick, MS sheet, vitreous enamelled white, with letters, figuers and conventional skull and bones in signal red colour and fixed with MS clamps made out of flat iron 25x3 mm, nuts-bolts, of approved size for LT 20 x 15 cm.
S&F in replacement new genration,post top energy saving environment friendly long life aesthitally designd with symmetrical light distribution LED gate light of capacity 70 watt with spun aluminium landscape luminaire with high power LED as light source all as directed by Engr-in-charge. Cat part No.RUBYPT70WLED757PSYMTOPC of Havells or equivalent model in Philips/Crompton/Wipro as approved by GE
S&F in replacement new genration,post top energy saving environment friendly long life aesthitally designd with symmetrical light distribution LED gate light of capacity 35 watt with spun aluminium landscape luminaire with high power LED as light source all as directed by Engr-in-charge. Cat part No.RUBYPT35WLED757PSYMTOPC of Havells or equivalent model in Philips/Crompton/Wipro as approved by GE
S&F in replacement new genration,post top energy saving environment friendly long life aesthitally designd with symmetrical light distribution LED gate light of capacity 30 watt (Warm white) with spun aluminium landscape luminaire with high power LED as light source all as directed by Engr-in-charge.
M&L for replacement of worn out street light bracket made out from GI Pipe 40 mm , light grade,1 m long bent to shape including fixing clamp made out from MS Flats of size 25x5 mm complete with nuts and bolts and washers of suitable size duly painted with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed .
M&L for replacement of worn out street light bracket made out from GI Pipe 40 mm , light grade ,2.5 m long bent to shape including fixing clamp made out from MS Flats of size 25x5 mm complete with nuts and bolts and washers of suitable size duly painted with two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed .
Disconnecting cable connection from pole box and street light fitting keeping safe for re use , making two nos holes with gas cutter in pole , one above the pole box and other near bracket for passing cable through pole includig reconnecting the twin core cable with pole box and fitting complete all as specified and directed .
M&L for replacement of worn out RCC street light pole with steel tubular swaged poles 9 mtrs long (straight) type 410-SP-31 swan neck type complete with cast iron base plate , nuts, bolts top cover and screws making two Nos hols on pole for cable protection inside of pole for connection including necessary excavation and earth work and applying two coat of aluminum paint over a coat of red oxide primer on pole and painting 03 Nos band/ strip with fluorescent sky blue synthetic enamel paint (30 cm wide each at distance of 30 cm from plinth block including writing numbers with white paint above 1.5 Mtr above ground level over black painted surfaces all as directed by Engr-in-Charge. Note:- PCC (1:3:6) type C2 for foundation and PCC (1:2:4) type B2 as in coping shall be measured & paid seperetely.
M&L for PCC(1:3:6) type C2 using 40 mm graded stone aggregate as in foundation of steet light pole all as directed by Engineer in Charge.
M&L for PCC(1:2:4) type B2 using 40 mm graded stone aggregate as in coping of steet light pole all as directed by Engineer in Charge.
M&L for replacement cross arms bracings clamps, gate light cages fabricated from structural steel including nuts bolts and washers welding , bending , cold or hot etc. including one prime coat one under coat and one final coat of approved colour paint all as specified and directed.
S&F SMC junction box (water proof) of size 250x250x160 for street light poles with connector for connection incoming and outgoing cables including provn of 01 No MCB SP 06 Amp to control the pole light circuit including 04 x aluminium bus bars strips 150x30x3mm of size mounting in the insulator and MS brackets made out of 32x4 mm, F1 clamps with suitable nut, bolts and washers including suitable size of double compression cable glands for incoming and outgoing cables.
M&L for replacement of PVC twin core unarmoured cable weather proof flat of size 4 sq mm solid aluminium conductor including making connection complete all as specified and directed.
M&L for replacement of PVC twin core unarmoured cable weather proof flat of size 6 sq mm solid aluminium conductor including making connection complete all as specified and directed.
Disconnecting and taking down street light fitting from pole keeping safe for re-use and taking out pole after necessary excavation work shifting to new location and errecting the pole at new location including necessary excavation and earth work , PCC in foundation and around the pole below GL and copping above the GL up to 20 cm including painting work to pole refixing the fitting making cable connection testing complete all as specified and directed by Engineer -in-Charge. Note: Location of shifting from and to shall be entered in MB
M&L for replacement of unserviceable street light fitting with energy efficient LED street light fitting powder coated PDC aluminium 30 Watt heat resistance toughened glass with lens dimmable (1V-10V DC input control voltage of 10% to 100% ) LED street light fitting with lens and surge protector upto 5 V internal & 10 V external complete with all acessories such as LED dirver and testing complete and connection with copper wire 1.5 Sqmm three core from pole box to street light fitting all as specified & directed by Engineer in Charge. Cat Part No. ENDURASUNDOWNSL30WLED757PASYBOPC of Havells or equivalent model in Crompton/Philips/Wipro as approved by GE
M&L for replacement of unserviceable street light fitting with energy efficient LED street light fitting powder coated PDC aluminium 70/72 Watt heat resistance toughened glass with lens dimmable (1V-10V DC input control voltage of 10% to 100% ) LED street light fitting with lens surge protector upto 5 V internal & 10 V external complete with all acessories such as LED dirver and testing complete connection with copper wire 1.5 Sqmm three core from pole box to street light fitting all as specified & directed by Engineer in Charge. Cat Part No. ENDURASUNDOWNSL70WLED757PASYBOPC of Havells or equivalent model in Crompton/ Philips/ Wipro as approved by GE
M&L for replacement of unserviceable street light fitting with energy efficient LED street light fitting powder coated PDC aluminium 100 Watt heat resistance toughened glass with lens dimmable (1V-10V DC input control voltage of 10% to 100% ) LED street light fitting with lens surge protector upto 5 V internal & 10 V external complete with all acessories such as LED dirver and testing complete connection with copper wire 1.5 Sqmm three core from pole box to street light fitting all as specified & directed by Engineer in Charge. Cat Part No. ENDURASUNDOWNSL100WLED757PASYBOPC of Havells or equivalent model in Crompton/ Philips/ Wipro as approved by GE.
M&L for replacement of unserviceable bulk head fitting of any type with LED bulk fitting with 10 watt LED complete connection with copper wire 23/0076 two core from ceiling rose to bulk head fitting complete all as specified and directed. Cat Part No. HEXAFT10WLED857SSYMBOPC of Havells or equivalent model in Crompton/ Philips/ Wipro as approved by GE.
M & L for replacement of Decorative bollard fitting (Garden Light) 1 x 10 Watt LED complete with lamp, including foundation work with brick work (300 x300 x 300 mm) in cm (1:6) duly plastered in cm (1:6) on exposed surface of brick work foundation including fixing junction box (ABS enclosure two pole complete with 1 No MCB SPN, 6 Amps) complete all as specied & directed by Engineer in Charge. Cat Part No. TURINBLS10WLED857PSYMTOPC of Havells or equivalent model in Crompton / Philips / Wipro as approved by GE.
Supply and fixing in replacement of aviation obstruction light LED type 30 W complete including testing complete all as specified & directed by Engineer in Charge.
M & L for applying one coat of superior quality aluminium paint on all exposed surface on steel tubler poles (HT/LT poles) with street light brackets including all associated fitting after necessary surface preparation of old painted surface complete including making strips as colour specified by Engr-in-charge with synthetic enamelled paint of 30 cm height, each alternative strip upto 1.5 mtr height marking space for numbering by good quality black paint on steel surface of size 150 x 100 mm at 1.5 Mtr from ground level & writing the number with white paint complete all as directed.Note: Pole number shall be entered in MB for payment purpose.
M & L for replacement LED flood light luminaire 100 Watts with high power LED and unique flood optics to ensure uniform distribution and savings of electricity maintenance free system ideal for area lighting, high mast and billboard including testing all as specified and directed. Cat Part No. JETAIRISFL100WLED757ARWBLTG of Havells or equivalent model in Crompton / Philips / Wipro as approved by GE.
M & L for replacement LED flood light luminaire 150 Watts with high power LED and unique flood optics to ensure uniform distribution and savings of electricity maintenance free system ideal for area lighting, high mast and billboard including testing all as specified and directed. Cat Part No. JETAIRISFL150WLED757P2AV2WBLTG of Havells or equivalent model in Crompton / Philips / Wipro as approved by GE.
Taking down care fully street light fitting of any type from wall /pole for repair and dismantling of the same cleaning thoroughly from out side and in side including replacement of unserviceable parts such as LED drivers etc and re fixing on the pole /wall and testing complete all as specified and directed. Note: Spare parts required for repair shall be measured and paid separately as supply only.
Supply only LED driver suitable for capacity 75/72/70/60/45 watt
Supply only LED driver suitable for capacity 80/90/100 watt
Supply only LED driver suitable for capacity 60/35/30 watt for Gate Lights
Supply only LED driver of capacity 12/10 watt for garden lights
Supply only of Integral LED street light module with complete PCB and LED bulb suitable for 75/72/70/60/45 W LED street light/flood lights for existing make and model complete all as specified and directed.
Supply only of Integral LED street light module with complete PCB and LED bulb suitable for 80/90/100 W LED street light/flood lights for existing make and model complete all as specified and directed.
Supply ,fixing ,commisioning and testing of Nature timer switch control Street Lights complete with MCB, Power and Panel duly complete with wiring Model : SWADEEP-02EC 8KW 3P, three phase ,max load 8.0 KW Manufactured by KAKATIYA ENERGY SYSTEMS LTD HYDERABAD or equivalent of other make complete all as specified and directed. Note :- CA No & date of installations shall be painted / marked on all timer switch provided by the contractor
Supply ,fixing ,commisioning and testing of Nature timer switch control Street Lights complete with MCB, Power and Panel duly complete with wiring Model : SWADEEP-02EC 5KW 1P, single phase ,max load 5.0 KW Manufactured by KAKATIYA ENERGY SYSTEMS LTD HYDERABAD or equivalent of other make complete all as specified and directed. Note :- CA No & date of installations shall be painted / marked on all timer switch provided by the contractor
Repair to foundation of garden light as existing of any type and size by using PCC 1:2:4 type B1 using 20mm graded stone aggrgate and plastering in CM 1:3 on exposed surface complete including excavation,returning filling and removal etc complete all as specified and directed.
M & L for Cutting/trimming of the tree branches 1.5 Mtr distance on both side of the LT poles/Panel and throwing to a distance not less than 50 meters all as specified and directed. Note : All the tools and safty equipment required for trimming of tree branches are to be arranged by the contractor and this shall be deemed to the quoted rates
Repair and maintinance of 20 Mtrs high mast including replacement of wiring, fixing of luminaire, low density aviation / obstruction light and checking of lighting arrester including greasing replacement of shaft and bearing and replacement of hinges of doors complete all as specified and directed. Note: Spare/ item to be replaced shall be measured & paid seperetely
Supply and fixing of copper wire 3 core 2.5 sqmm suitable for LED flood light from junction box to light fitting at the top of high mast 20 mtrs all as specified and directed.
Supply and fixing of steel wire rope suitable for 20 mtrs high mast 2-3 suspension including bull dog grips all as specified and directed.
M& L for repairing of High mast motor of capacity up to 2 hp including oiling greasing repairing of burn out copper wiring rewinding complete all as specified & direced by Engr-in -charge.
Supply and fixing of LED flood light luminare 200 watt unique flood optics to ensure uniform distubutionm maintenace free system powder coated, pressure die-cast aluminium housing nclear toughened flat galss cover. The entire housing protection will be dust and water proof having IP 65 protection ideal for area light high mast alll as spcified and directed. Cat Part No. JETAIRISMAXFL200WLED757PWBKTG of Havells or equivalent model in Philips/Wipro/Crompton as approved by GE
S& F in relacement of solar street light 18 W All in one type with 2 days back up. complete all as specified and directed by Engr-in-charge.
M/S M.S.ENTERPRISES
M/s A S Electrical
VEE KAY ENTERPRISES
MTR GROUP & COMPANY
SAKSHAM SUPPLIERS BUILDERS
Kumar Electricals
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .