Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | l-1₹17.2 LAccepted-AOC | l-1 | Accepted-AOC Tender accepted due to lowest and quoted reasonable rates | |
| 2 | l-2₹18.0 L+₹79,939.65 (4.65%)Rejected-Finance BALSUA P O JHAKOLARI PATHANKOT PATHANKOT PUNJAB 145001 | PATHANKOT | PUNJAB | 145001 | l-2 | Rejected-Finance Higher side quoted amount | |
| 3 | l-3₹18.7 L+₹1.5 L (8.76%)Rejected-Finance HOUSE NO 104 WARD NO4 MOHALLA WADHERIAN PATHANKOT GURDASPUR PUNJAB 145001 UDYAM PB 16 0006453 | PATHANKOT | PUNJAB | 145001 | l-3 | Rejected-Finance Higher side quoted amount | |
| 4 | l-4₹20.4 L+₹3.2 L (18.4%)Rejected-Finance | l-4 | Rejected-Finance Higher side quoted amount | |
| 5 | l-5₹20.5 L+₹3.3 L (19.1%)Rejected-Finance | l-5 | Rejected-Finance Higher side quoted amount |
Tender Value
Refer Docs
EMD Value
₹47,080
Closing Date
26 Aug 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(W)Pathankot
GE(W)Pathankot
SPL REPAIR OF BLDG NO. T-143C TO 145C AND T-24B TO T-29B (BATHROOM AND TOILETS) AT SUJANPUR IN AOR OF AGE BR-II UNDER GE (WEST) PATHANKOT
2023_MES_610552_1
GE/PKT-23/2023-24
Open Tender
Miscellaneous Works
Item Rate
180 days
Pathankot
AS PER TENDER AND NIT DOCUMENTS
8 documents required · 8 mandatory
₹500
GE(W)Pathankot
₹47,080
25 Sept 2023
25 Jul 2023
27 Aug 2023
25 Jul 2023
26 Aug 2023
14 Aug 2023
Amount
Sch 'A' Part-I B/R work:- Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)
Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames)
Taking down shutters of any description exc. 1.00 sqm but not exc. 2.00sqm for refixing or removal from site all as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.
S&F 100mm long butt hinges, medium weight, cold rolled mild steel
S&F 200mm long aluminium anodised, barrel tower bolts of extruded section
S&F 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy.
S&F 150mm long extruded aluminium alloy handles, cast type, anodised
S&F in repair steel window/Ventilator factory made box type and shutter (double shutter) with sash bar made out of section using flash butt welding, hinges shall be provided to both shutters complete including all fittings including grills made out of 10 mm dia round bars glazing with 3 mm thick oridinary glass, guaging (wire mesh stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.18mm and fixed with stainless steel wire staples or using metal nut and bolts ) and two coat synthetic enamel paint over and including a coat of red oxide primer all as per drg No CEPZ/ TD/032/13 Sheet 1/2 including taking out old windows complete all as specified & directed.
S&F in repair Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified
Dismantling timber scantlings 40sqcm and over in section, in any position as in wooden trusses in framed work of any description complete all as specified and directed..
M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240
M&L for Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. confirming to Fe-290 (Gde E?165)
M&L for preparation of new surfaces of steel of any description , over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge ..
M&L for preparing old steel surfaces of any description over 10cm width/girth and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.
Demolition of brick or stone/block masonry built in cement mortar including all quions, arches, pillars etc., but excluding ashlar facings, dressed stone works and precast cement articles, complete all as specified and directed by Engr-in-Charge.
M&L for Fly ash brick work, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed.
M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6 m mean radius built in cement mortar 1:4 complete all as specified and directed.
Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for Rendering 15 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified.
M&L for Rendering 20 mm thick on fair face of brick work or concrete/stone surfaces in CM 1:4 finished even and smooth without using extra cement complete all as specified.
Rendering 15 mm thick otherthan fair face of brick work or concrete/stone surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.
M&L for 3 coats of white wash on new plastered surfaces of wall including preparation of surfaces all as specified and as directed.
M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge ..
M&L for complete removing existing treatment of old plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed by Engr-in-Charge ..
M &L for preparation of old plastered or unplastered ,old/un decorated surfaces of brick/concrete/stone wall surface by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying three coats of white wash complete all as specified and as directed.
Demolition of Roofs, floors (other than ground floors), beams staircases, landing, cooking platform ,chajjas, & similar suspended work cement concrete is reinforced (reinforcement cut as required to facilitate demolition) and disposal of debris out of MoD land complete all as specified and directed. Note:- Demolition will be done only by mechanical cutter only .
Demolition of PCC (un-reinforced) in ground floors & pavings n.exc 15 CM thickness below or above ground level, complete all as specified and directed by Engr-in-Charge.
M&L for 25 mm thick PCC 1:2:4 type B-0 using 12.50 mm graded crushed stone aggregate as in flooring and surface finished rough all as specified and as directed.
Dismantling of floor hearth and wall tiling including cement mortar bedding (but not backing) and removing serviceable like to store and rubbish off the premises, complete all as specified and directed by Engr-in-Charge
M&L for Non skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles including laid over screed bed of 15mm thick of cement mortar 1:6 all as specified and directed.
M&L for Glazed coloured ceramic tiles in vertical surface 450X 300X 7-8mm thick such as skirting dado, etc set and jointed in neat cement slurry and pointed in white or colour cement to match the shed of tile including laid over 10mm thick backing layer of cement mortar (1:4)
M&L for non abrasive paving (endura) tiles 300mm x 300mm x10mm thick (square/ rectangular) polished, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed CM 1:4 to match including 75mm thick sub base of PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate complete al as specified and directed.
M&L for Cement Concrete , 1:2:4, type B-1 using 20mm graded crushed stone aggregate as in lintel upto 1.50 m span, cills, steps, seismic and other silmilar bands, plinth courses, sring courses,lacing courses, parapets and railings upt 60 cm in height, copings, kneelers, apex stones, bed plates, water troghs and the like including weathering, slightly rounded or camphered angles and throating, complete all as specified and directed by Engr-in-Charge.
S&F in repair Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed
S & F in repair 15 mm bore long body CP Bib taps cast copper alloy fancy type with capstan heads (chromium plated),and cup screwed down , high pressure for iron pipe complete all as spd & directed.
S&F in repairs Viterous China wash basin, white, flat back, size 550x400mm excluding taps etc but including brackets,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specfied and as directed.
S & F in repair 15mm bore dia fancy type long sank, chromium plated angular valves /stop valves, cast copper alloy, screwed down, high pressure ,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed.
S&F in repair for 15mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type),cast copper alloy, screwed down, high pressure, with crutch or above butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified .
S&F in repair 1000 ltr rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 02 nos 20mm dia tank nipple and 01 Nos 32mm dia drain plug complete all as specified in SSR Part I
S&F in repair PVC low level valveless, flushing cistern 10 Ltr capacity with inlet , ball valve, float valve and handle & including brackets for fixing to walls and PVC flush pipe of LDPE pipe of pressure rating 6 kg (f)/ sq.cm complete all as specified and directed by Engr-in-Charge.
Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed.
S&F in repair galvanised iron, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors in any length of 15 mm bore pipe complete all as specified and directed by Engr-in-Charge
All as per Srl item no. 43.00 here-in-before but 20 mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repair 15 mm dia PVC connection of 450mm long including PTMT nuts
S & F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic ball screwed for iron pipe & fixed. (min. weight 20mm-210 gms) complete all as specified and directed.
S&F in repair Vitreous China squatting pan 'Orissa' pattern size 580 x 440 mm white, with integral foot rests with connection to drain and to flushing pipe antisyphonage pipe, PVC (SRW) 'P' trap including making good to floor complete all as specified and dirtected by Engr-in-Charge .
S & F in repairs 15 mm dia Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts.
S & F in repair brass chromium plated shower roses 125mm size with or without swivel joints including fixing to steel pipe or union complete all as specified and directed by Engr-in-charge.
S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed by Engr-in-Charge.
S & F in repair corner glass shelf with bracket fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and as directed.
S&F in repair Flush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern
S&F in repair 20mm dia Aluminium anodised tubular towel rail 600mm long D type incl a pair brackets fixed to wall complete all as specified and directed by Engr-in-Charge.
S&F in repair Grating doom 100 mm dia of PTMT (Minimum weight 25gms) complete all as specified & directed.
M&L for 75 mm thick PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in flooring, PCC path, plinth protection and surface finished even and fair with out using extra cement all as specified and as directed.
Excavation in trenches, not exceeding 1.5 m wide and not exc 1.5 m in depth for foundation, laying of pipes etc and not exceeding 10 sqm on plan for manholes etc and getting out in any type of soil, complete all as specified. and directed by Engr-in-Charge.
Excavation over area not exceeding 1.5 m depth and getting out in any type of soil, complete all as specified and directed by Engr-in-Charge.
All as per item No 58 here-in-before but exceeding 1.5 m and not exceeding 3.00 m depth.
Demolition and breaking up drain pipe (salt glazed stone water or AC)/SWG of any dia set in cement mortar, complete all as specified and directed by Engr-in-Charge.
M&L for HDPE DWC pipe 200mm internal dia and external dia 230mm SN-08 laid in tranches and jointed with cement solvent including testing complete all as specified and as directed by Engineer-in-Charge.
M&L for concrete bed to drain pipe in PCC (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) including packing under and haunching against the sides of pipe after laid and tested for 200 mm bore pipe, complete all as specified and directed by Engr-in-Charge.
Returning filling in including spreading, levelling, watering and well remming in layers not exceeding 25cm thick in hard/dense soil complete all as specified.
Removal to excavated material (Soil) to a distance not exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed by Engr-in-Charge.
M&L for Plain cement concrete 1:4:8 type D-2 (using 40 mm graded crushed stone aggregate) as in foundation filling and mass concrete, complete all as specified and directed by the Engr-in-Charge.
M&L for PVC (SWR) gully/floor trap 110 mm with grating and 300mm long outlet, setting and jointing with solvent cement
S&F in repair PVC (SWR) bends any radius of 110mm bore complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall of 110mm bore pipe complete all as specified and directed by Engr-in-Charge.
S&F in repair PVC (SWR) junction single, (single-T), equal or unequal of 110mm bore complete all as specified and directed by Engr-in-Charge.
M&L for RCC nominal mix, M-20 ( using 20 mm graded crushed stone aggregate ) as in Beams, cantilevers, bressummers, lintels over 1.5m span (Note:-TMT bars will be masured and paid sepretly)
M&L for RCC nominal mix, M-15 type B-1 ( using 20 mm graded crushed stone aggregate ) as in slabs supported on walls, beams and columns in floors, roofs, complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)
Precast reinforced cement concrete, type B-1,1:2:4 (using 20mm graded crushed stone aggreagate)as in manhole cover set in cement mortor 1:4 , complete all as specified and directed by Engr-in-Charge. (Note:-TMT bars will be masured and paid sepretly)
S&F mild steel TMT bars 10 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
S&F mild steel TMT bars 6 to 8 mm dia and over, cut to length , bent to shape required including cranking , bending spirally for hooping for columns, hooking ends, binding with and including mild steel wire ( annealed ) not less than 0.9mm dia , complete all as specified and directed by Engr-in-Charge.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.
M&L for form work to soffits of suspended slabs such as roof slabs, floor slabs, shelves and similar work not exc.200 mm thick (horizontal or slopping) for fair finished flat surfaces all as specified and as directed.
S&F in repair 100mm dia Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall complete all as specified.
S&F in repair 100mm dia Cast iron cowls
M&L for brocken brick as Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells
Taking out [desilting] silt, bricks bats, debris, liquid waste, sludge in solid / semisolid state from the manholes including pumping out sludge wherever necessary, slugging, diverting the flow in the drain, if necessary and staking the removed silt/sludge in deposit away from the edge of manholes as directed including use of safety belt, dry cells torch for lighting in side the man hole and taking similar safety measures and removing the sludge to a distance exceeding 250 m but not exceeding 500 m and cleaning the manholes with clean water etc complete all as specified and as directed for manholes of following size of manholes of depth not exceeding 1.00 meter
Taking out [desilting] silt, bricks bats, debris, liquid waste, sludge in solid / semisolid state from the manholes including pumping out sludge wherever necessary, slugging, diverting the flow in the drain, if necessary and staking the removed silt/sludge in deposit away from the edge of manholes as directed including use of safety belt, dry cells torch for lighting in side the man hole and taking similar safety measures and removing the sludge to a distance exceeding 250 m but not exceeding 500 m and cleaning the manholes with clean water etc complete all as specified and as directed for manholes of following size of manholes of depth exceeding 1.50 meter but not exceeding 2.00 meter
Cleaning of sewage line in any depth including affected/connected manholes and desludging, dewatering of man hole of any size by mechanical sucking/pressure pump(truck mounted) including cleaning of connected sewage pipe line of size 100/150/160/200/300mm bore laid in trenches and any length,including water closet, gully trap etc by hydraulic jet pressure machine as required at site flushing the line and manholes with water as to make the fully functional line with man hole to entire satisfaction of Engr-in-charge and removing sludge out side the periphery of defence land at his own arrangement where sanitary hazards do not take place as per direction/instruction of civil authority and burried in excavated pits and covering the same. Adequate water for flush out sludge to be arranged by the contractor without any extra cost.Pipe line including manholes cleared/ cleaned under this item is to arranged by the contractor without any extra cost.pipe line including manholes cleared/cleaned under this item is to be maintained by the contractor and kept fully functional by removing any type of blockage of entire period of completion of work without any extra cost and refixing manhole cover after cleaning all as specified and directed. Note: unit rate quoted by tendere shall include taking out sludge from line and manhole(liquid,semi-liquid,solid) excavation of borrow pit for dumping sludge, removing including loading, unloading and transportation etc
Material and labour for cutting down plants / trees of girth not exc 15 cm & surface are not exc 0.36 Sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of of rain water / soil /waste vent pipes including taking out roots entered in wall/slab surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions and as specified. Note:- Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, trestles, ladders, cradles etc ,hoisting, lowering and protective measures etc up to four storeys height of bldgs and removing of debris out of MoD land complete all as specified and as directed.
Sch 'A' Part-II E/M work:- Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc
M&L for point wiring for one light/one fan controlled by one switch with 1.5 Sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with and including PVC concealed conduit heavy duty 20 mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked for switches and sockets , including 1.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly, including cutting chiseling for concealed piping and making good disturbed surface to match with the existing surface complete all as specified and directed.
All as per Srl item No 86 here-in-before but for 5 pin 5 amps socket outlet on independent board complete all as specified and directed.
All as per Srl item No 86 here-in-before but for 5 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed.
M&L for point wiring with 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable with in and including PVC concealed conduit heavy duty 20mm dia having thickness not less than 1.8 mm with all fittings including anodise pressed steel sunken box having thickness not less than 2mm with 3mm thick bakelite laminated sheet ISI marked suitable for 5 pin 15 amps socket outlet ,including 2.5 sqmm PVC insulated unsheathed multistrand copper conductor FRLS cable as earth continuity conductor connected to comman earth dolly in and including cutting chiseling for concealed piping and making good disturbed surface finishing the surface to match with the existingsurface complete all as specified and directed.
S&F in repair switch piano flush type one way 5 amps SP 240 volts complete all as specified and directed.
S&F in repair switch piano flush type one way 15 amps SP 240 volts complete all as specified and directed.
S&F in repair socket outlet 2 in 1, 3 pin 5 amps flush type 240 volts complete all as specified and directed.
S & F socket outlet 2 in 1, 5 pin, 5 and 15 amps flush type 230 volts complete all as specified and directed.
S&F in repair lamp holder/batton holder/angle holder insulated body with bakelite back plate suitable for fittings complete all as specified and directed.
S&F in repair ceiling rose 65 x 50mm three terminals complete all as specified and directed.
S&F in replacement sleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.
S&F in replacement LED bulb, B22 type ,14 watt,complete all as specified and directed.
S&F in replacement sleek LED Batten light fitting 4 feet long 1x20 W including LED tube 4 feet long of same make having ballast , bipin holder, connector block etc. complete with all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 Sqmm 3 core complete all as required at site or directed.
S&F in repair LED Bulkhead fitting 10 watt with PDC aluminium housing and polycarbonate diffuser with IP-66 protection all as specified and directed by Engr-in-charge.
M & L for providing/ cutting the round/ square hole of required size in wall finishing the distrubed surfaces as per existing finishes complete all as spd and supply and fixing propeller steel body AC ventilating fans, Single phase, 230 volts 300 mm sweep complete and supply and grouting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 1.5 sqmm copper cable from ceiling rose to exhaust fan motor and writting MES No. with black synthetic enamel paint 2.0 cm high complete all as spd and directed by Engr-in-charge.
S&F in repair distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 8 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed
S&F in repair distribution board double door made out of sheet metal enclosure (CRCA sheet) dust and vermin proof SPN 4 way with 200 Amps rated copper bus bar neutral bar, earth bar IP 43 protection, single pole and neutral 250 volts, flush to wall / fixed on surface complete all as specified and directed
S&F in repair MCB SP 6-32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in repair MCB SPN 32 Amp 240 volt AC with 10KA breaking capacity of 'C' series in distribution boards all as specified and directed.
S&F in replacement sub Main Wiring with two Run of single core PVC insulated unsheathed multistrand FRLS flexible copper conductor cable of size 2x6 sqmm and one PVC insulated multistrand unsheathed FRLS flexible copper conductor cable of size 6 sqmm (green colour) as earthing lead connecting to main earthing dolly drawn in and including non metallic PVC concealed conduit 20mm dia complete and making good to disturbed surface complete of wall/floor with cement mortar and finishes to match the existing surface complete all as specified and directed. Note:-Two run of submain wire (phase and neutral) and one run of earth wire including PVC conduit and accessories will be measured as one run.
S&F in replacement bldg secuirty light fitting energy saving high efficiency LED street light fitting 30 Watts, 5700 K, IP 66, having pressure die cast housing with toughened glass and individual high power LEDs with secondary optics, prismatic polycarbonate cover complete including GI bracket of size 32 mm dia bent to shape having length not less than 1.5 mtr fixing with clamp etc and making connections using cord flexible 3 core copper cable of size 23/ .0076 from ceilling rose/ PVC connector to light fittings or as directed by Engr-in-chrage.
M & L for earthing complete with galvanised steel earth plate electrode , 600 x600 x 6mm thick burried directly in the ground (earth pit not less than 2.25 mtr deep below ground level)with top edge of the plate not less than 1.5mtr below ground level connected to galvanised iron wire 4mm dia as earth lead by means of bolts, nuts and washers of GI up to test point , GI tubing 15 mm bore light grade protection pipe , GI watering pipe 20mm bore light grade with funnel and wire mesh , charcoal ,salt packed around the earth plate and precast PCC 1:2:4 (Nominal mix ) reinforced with XPM having weight not less than 4 kg /sqm including suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover including earth work in any type of soil , removal of surplus soil to a distance n.exc 50m and connecting , testing on completion complete all as shown on electric plate No 03 of SSR -2009 Part I and connecting to existing earth test point complete all as specified and directed or including testing on completion.(Note: Excavation and earth work is deemed to be included in the rates quoted).
Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 47,911.00 and any other reduction if any from quoted amount.
GANDOTRA CONSTRUCTION CO
Ambika Construction Co
M/S Raghuvanshi Builders
M/S BISHAN DASS AND SONS
V K Sharma and Sons
JP AND CO.
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .