SPL REPAIR TO INTERNAL ROADS IN THE AREA OF AGE B/R-III UNDER GE(SOUTH) MEERUT CANTT

Amount

Material and labour preparing the existing black top surface with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose, dirt etc and material and labour for applying evenly a priming/tack coat with bituminous primer (paving bitumen) (VG-10) viscosity grade @ 5 Kg per 10 Sqm complete all as specified and directed.

Material and labour for bituminous premixed semi dense asphaltic concrete 30mm thick (consolidated thickness) stone chippings mixed with 5.5% of binder contents paving bitumen (VG-10) viscosity grade by weight of total mixed in hot mix plant, transported to site on tippers and laid with mechanical paver and rolled to a uniform smooth surface with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.

Material and labour for premix bituminous macadam bitumen @4% (by weight of total mix) binder contents (VG-10) viscosity grade any penetration laid and rolled and compacted to required gradient and camber (consolidated thickness n exc 75mm) with 8 to 10 ton power roller complete all as specified and directed.

Material and labour for repair to pot holes any depth, not exceeding 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 25mm in depth and making good by filling in screened and graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat at 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again rammed (including supply or premixed macadam,binder and chippings),depth of potholes exc 30mm complete all as specified and directed

Material and labour for cleaning the road surface from dirt, oil/grease spots and foreign material etc and applying 2.50 mm thick road marking strips (retro reflective) of white/yellow colour using Hot Themoplastic material by fully/semi automatic thermoplastic paint applicator machine fitted with profiles shoe, glass beads dispenser, propane tank heater and profile shoe heater driven by experienced operator complete all as specified and directed make of paint STP or Equvaliant as approved by GE.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions.

Supply and fix solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed Colour :Red/amber/green.

Material and labour preparation of old surface of kerbs stone and applying two coats of synthetic enemal paints to cement concrete surface over 10 cm width or girth on kerbs all as specified and directed.

Supply and fix in repair speed breaker providing rounded (of 17 meter radius) hump of 3.7 meter width and 0.1 meter height, applying providing and laying bituminous premixed asphaltic semi dence concrete 30 mm thick consolidated thickness with machanical paver mixed at hot mix plant , transported to site on tippers,stone chipping mixed with 5.5% by weight of total mix of paving binder (VG-10) viscosity grade by weight of total mix rolled to uniform smooth surface with 8 to 10 tone power roller to required gradient.

Tridev Construction Company

choudhary construction company

Keshav Brothers

M/S AMAR ELEKTRO CENTRE

VERMA CONSTRUCTION CO

Harsha Consultant and Builders

G. K. CONSTRUCTION