Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹7.0 LAccepted-AOC 492 PHASE 6 MOHALI | MOHALI | ₹7.0 L | L1 | Accepted-AOC Quoted Lowest rate |
| 2 | L2₹8.6 L+₹1.6 L (22.9%)Rejected-AOC AO 144 GF SECTOR 48 C MOHALI | FATEHGARH SAHIB | PUNJAB | 140405 | ₹8.6 L+₹1.6 L (22.9%) | L2 | Rejected-AOC Quoted Higher rate |
Tender Value
₹9.1 L
EMD Value
₹18,170
Closing Date
26 May 2026, 4:00 pmClosed
Executive Engineer Provincial Division Chandigarh
Room No. 315-16 Third Floor, 17 Bays Building, Sector 17, Chandigarh
PROVIDING ALUMINUM PARTITION AT ALL FLOORS IN STAIR CASE AREA NEAR LIFT IN MAIN BLOCK VIT-TE-YOJNA BHAWAN, SECTOR 33, CHANDIGARH
2026_CEPW_168384_1
12 Dated 15.05.2026
Open Tender
Civil Works
Percentage
90 days
Sector 33 Chandigarh
Please refer Tender Documents
3 documents required · 3 mandatory
₹5,000
₹18,170
Yes
9 Jul 2026
15 May 2026
28 May 2026
15 May 2026
26 May 2026
15 May 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate z sections and other sections conforming to Is: 733 and IS : 1285 of Jindal, Hindalco, Mahavir or equivalent make approved by Engineer in Charge , fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC Plug/neoprene felt etc. aluminum sections shall be smooth, rust free, straight, mitered and jointed mechanically wherever required including cleat angle, aluminum snap beading for glazing/paneling, C.P.brass/stainless steel screws, all complete as per architectural drawings and the directions of Engineer-InCharge. (Glazing and paneling to be paid for separately) : For fixed portion and chawkhats (CSR 17.45) (a) (Rs.352 + 5.35%) | 1,060.9 | Kg | 370.83 | ₹3,93,413.55 |
| 2 | For shutters of doors, windows & ventilators including providing and fixing hinges/pivots and labour for fixing of fittings wherever required including the cost of PVC Plug / neoprene gasket required (CSR 17.45) (b) (Rs.368 + 5.35%) | 199.18 | Kg | 387.69 | ₹77,220.09 |
| 3 | Providing Polyester Powder coating 50 micron any coloured specified to alumnum section of various sizes including carriage of material from market to workshop & workshop to site of work. (CSR 18.48) (Rs.68.00 + 5.35%) | 1,260.08 | Kg | 71.64 | ₹90,272.13 |
| 4 | Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with PVC Plug/ neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminum snap beading shall be paid in basic item) (i) Float glass panes of 5 mm thickness. (CSR 17.47) (i) (Rs.1035 + 5.35%) | 140.52 | Sqm | 1,090.37 | ₹1,53,218.79 |
| 5 | Providing and fixing film on glass complete in all respect | 1,134 | Sft | 100 | ₹1,13,400 |
| 6 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture IS : 6315 marked, for doors including cost of cutting floors as required, embedding in floors and cover plates with brass pivot and single piece MS sheet outer box with slide plate and with stainless steel cover plate etc. complete as per the direction of Engineerin-charge. (CSR 17.48) | 24 | Each | 1,961.62 | ₹47,078.88 |
| 7 | Dismantling brick or flagged stone flooring including concrete base. (CSR 8.18) | 1.12 | Sqm | 89.55 | ₹100.3 |
| 8 | Providing & fixing 125mm with Plate 175mm X 32 mm anodized aluminum Mat Finish handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.(CSR 17.82) | 24 | Each | 25.28 | ₹606.72 |
| 9 | Providing and fixing aluminum door stopper | 12 | Each | 120 | ₹1,440 |
| 10 | Providing & fixing 250 X 10 mm anodized aluminum Mat Finish tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. (CSR 17.85) | 24 | Each | 76.91 | ₹1,845.84 |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.49 MB
BOQ_342925.xls
BOQ • 0.29 MB
SBDVitTeYojan.pdf
Tender Documents • 5.11 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .