WELCOME MAINTENANCE, REPAIR TO EXTERNAL INTERNAL PLASTERING, JOINERY, FLOORING , TILLING , PLUMBING , SANITARY FITTINGS, CERTAIN BR WORKS AND CERTAIN INTERNAL EM WORKS AT AF STN DHANSA UNDER AGE BR AF RAJOKRI AND AGE EM AF RAJOKRI OF GE AF

Amount

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of Cement base paint complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper complete all as specified and as directed.

All as per item No-2 above but on surfaces of ceiling.

M&L preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and as directed.

Preparing of old French polishing surfaces of any description , width or girth including cleaning surface including a coat of wood filler and applying two coats French polishing complete all as specified.

Preparing of old external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying two coats of exterior emulsion paint over a court of primer complete all as specified and as directed.

Taking down plaster of any description on brick or stone walls etc. including raking out joint, hacking for key, scrubbing down with water etc incl patches of any size complete all as specified and as directed.

M&L 15mm thick rendering in cement mortar 1:4 on brick or concrete surfaces including rendering on fins , fascias, chajjas, parapets etc. and finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:6 on brick or concrete surfaces including finishing the surfaces even and fair without using extra cement complete all as specified and as directed.

M&L 10mm thick rendering in cement mortar 1:3 on concrete surfaces of ceiling including finishing the surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls/ceiling and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls, fascias, chajjas, parapets etc. and applying two coats of Exterior Imulsion paint over a coat of primer complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered surfaces of walls/ceiling and applying two coat of cement base paint complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each and removing from site complete all as specified and as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm and n.exc 4 Sqm each and removing from site complete all as specified and as directed.

Taking down shutter of any description exc 1 Sqm and n.exc 2 Sqm and removing from site complete all as specified and as directed.

Dismantling of alumuinium work ie. Door frame and windows , shutter any description etc complete

S&F anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for door shutters, windows and ventilators with one or more rebates with and including joining cleats for fixing etc complete all as specified and directed.

S & F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutters, fixed , aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S & F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) window and ventilator shutters, fixed or side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified.

S&F in repair fabricated anodized aluminium grill of size 75x100mm, using 5mm dia bars fixed to frames using U/V section runners complete all as specified and directed by Engr-in-Charge

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs with glazing bars, dovetailed or welded complete all as specified and as directed.

S&F steel windows with side hung shutters including projecting type hinges/box type hinges with steel handle, and steel peg stay, complete including lugs without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood plain framed, panneled shutters (Two panels) with lock rail and pannel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rails and stiles as per IS-1003 (Part-1) Kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F factory made 35mm thick flush shutters solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying a coat of wooden filler liquid and applying two coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

S&F solid PVC door frame of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing. Make:- Rajshri

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing as specified. Make:- Rajshri

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

Dismantling mild steel work of any description not otherwise provided for

S & F Rolled Mild Steel Plates (plain or Chequered) channels, square cut or notched, forming holes, without any attachment confirming to Fe 410 - S

S&F steel work as in tubular, rafters, purlins, posts and similar work (round/sqare/rectangular shape of pipes as approved by Engr-in-charge ) trusses of semi circle/ curved shape up to height 6 mtr including post special shaped washers etc complete incl necessary nut bolts wind ties and gusset plates etc using ERW or induction butt welded tubes conformining to IS 1161-1998 garde St-240

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with selftapping screws as specified & directed.

S&F in repair MS framed work such as grills, gratings, etc with ends of bars, shouldered and/ or riveted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk way, railing and framed work of water tanks and similar work confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F in repair mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering, doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering running rails and guides) and hanging also fastening including holdfast and fixing complete all as specified and as directed.

Cutting holes in brick walls or stone wall built in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in CM 1:3 or cement concrete 1:2:4 depth exc half brick but n.exc one brick complete all as specified and as directed.

S&F 200mm long aluminium anodised barrel tower bolt of extruded section complete all as specified and as directed.

S&F 125mm size aluminium handle cast type anodised complete all as specified and as directed

S&F 250mm long aluminium alloy anodised sliding door bolts with hasp stapple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and as directed

S&F stainless Steel Butt hinges of 100 mm size, complete all as specified and directed.

All same as per item No 44 here-in-before but 75mm size.

S&F double legged door stopper of aluminium alloy with rubber complete all as specifified and as directed.

S&F mild steel ordinary rat tail rod pattern springs including rollers and roller plate complete all as specified and as directed

M&L for cement concrete Type B-0, 1:2:4 using 12.5mm graded stone aggregate as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and as directed.

S&F in repair door seals made of aluminium strip powder coated 20 mm wide and provided rubber/ cotton mat lining fixed with screws to door shutters up to 1m width opening complete all as specified and as directed.

S&F 25mm thick flush shutters, as in cupboard , solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed

S&F 18 to 19mm thick block board grade 2 quality interior grade decorative type with decorative face veneer on one face fixed with screws to timber framework as in shelves, drawers etc complete all as specified and as directed.

S&F 40mm dia cup board/ kitchen cabinet knob of wood finish fixed with nut, screw and washer complete all as specified and as directed.

S&F magnetic catcher 50mm long complete with plate fixed with screws complete all as specified and as directed.

S&F in repair 15 mm bore bib tap cast copper alloy with crutch or butterfly handles screwed down for iron pipes or for brass ferrule complete all as specified and as directed

S&F in repair 15 mm bore bib tap copper alloy chromium plated, fancy type, long shunk screwed down for iron pipes or for brass ferrule complete complete all as specified and as directed

S&F as in repair 15 mm bore pillar taps cast copper alloy capaston head chromium plated, fancy type screwed down high pressure with or without lettered “ HOT” or “ COLD” with long screwed shanks and fly nuts screwed for iron pipes fixed as in repair complete all as specified and as directed

S&F in repair 15 mm bore stop valve/angle valve cast copper alloy chromium plated, fancy type, screwed down high pressure, screwed both ends for iron pipe or for union complete all as specified and as directed

S&F as in repair shower rose of 100mm circular type cast copper alloy, chromium plated, fancy type, with swivel joint fixed to 15 mm bore iron pipe complete all as specified and directed

S&F in repair waste fitting brass chromium plated of 32 mm dia for wash hand basin with long screwd sanks and fly nuts flange end bedded in red lead cement and other end fixed complete all as specified and directed

S&F in repair 610 mm long PVC waste pipe flexible type 25 mm dia suitable for couplings 32 mm & 40 mm dia complete all as specified and directed

S&F in repair PVC flushing cistern low level of 10 Ltr capacity valveless, symphonic action type (white colour) with inlet, balll valve, float end handle including flush pipe of 32 mm bore MS chromium plated and connection to pipe etc complete all as specified and as directed.

S&F in repair 100mm/125mm dia mild steel chromium plated grating fixed on floor trap/Nahni trap with CM 1:6 complete all as specified and as directed

S&F 32 mm bore chromium plated bottle trap for wash hand basin with inlet & outlet screwed for iron pipes or connection including necessary packing , union and cap as in repair complete all as specified and as directed

S&F as in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and as directed

S&F as in repair vitreous china wash down water closet pan (Pedestal Pattern) EWC white (excluding flushing cistern & flush pipe) incl connection to out going pipe and flushing pipe complete all as specified and as directed

S&F as in repair plastic water closet seat cover, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed

S&F in repair vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed

S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or liboratory with plugs washers and waste incl bedding in cement mortar to dwarf walls or including fixing cantilever brackets and connecting union to pipe over all size 915mmx460mm bowl size 410x330x160mm complete all as specified and as directed

S&F plate rack of stainless steel, sheet 1mm thick for kitchen overall size 750x900x250 mm ,fixed with plugs and washers on wall complete all as specified and directed. Make :- Pryag or equivalent

Taking down 15 mm bore mild steel tubing and connections incl cleaning for refixing or removal from site complete all as specified and as directed

All as per item No 70 above but for 20 mm bore

S&F 15 mm bore mild steel water tubing medium grade galvanized with all fittings and fixture fixed to walls ceiling , concealed in walls or laid in floors complete all as specified and as directed

All as per item No 72 above but for 20 mm bore

Disconnecting to existing PVC tanks , setting aside ( for lowering down if required ) for repairs , if hoisting if required reconnecting and refixing in position cap upto 1000 ltr including cleaning of overhead tank including removing the sludge washing down with detergent powder & writing the date of cleaning with paint complete all as specified and as directed

S&F as in repair rotational moulded polythene water storage tank of capacity 500 Ltr 3 layer (cylindrical vertical with closed top cover), hoisted and fixed in position all specified in SSR part –I ( 1991) complete all as specified and as directed by Engineer-in-Charge Note : The cost of accessories like inlet and out let pipe ball valve to air vent pipe shall be measured and paid separately under concerned item No thing extra admissible on this account

All as per item no 75 above but 1000 ltrs 3 layer

S&F in repair brass face heavy duty for pillar cock, CP stop cock CP Bib cock and concealed stop cock complete all as specified and directed

M&L 40 mm thick PCC ( 1:24) type B-1 , 20 mm graded stone aggregates laid in alternate bays as in floor surface finished even and smooth without using extra cement including roughening to existing concrete surface and using cement slurry @ 3 Kg/Sq mtr before laying concrete in floor complete all as specified and as directed

S&F 3mm thick & 28mm wide glass dividing strips

Dismantling of floor , hearth , or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed

M&L for ceramic coloured / non-skid tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed

M&L for ceramic coloured / non-skid tiles 7 to 8 mm thick (square / rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed

M&L for Vitrified ceramic coloured tiles 9 to 10 mm thick (square / rectangular) area of each tiles not exceeding 0.36 Sqm as in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface of tiles including 15 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed

Ditto all as per item No 81 above but on vertical surface such as skirting / dado etc

Ditto all as per item No 82 above but on vertical surface such as skirting / dado etc

Ditto all as per item No 83 above but on vertical surface such as skirting / dado etc

M&L for Glazed ceramic coloured tiles in vertical surface 450X 300X 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tiles including 10 mm thick screed bedding layers in CM (1:4) and pointed complete all as specified and directed.

Cutting holes in brick walls/concrete surface to clear the junction of CI pipes & fitting coming at outer face of the out side wall or any other situation ands making good the dismantled portion in cement mortar 1:4 or cement 1:2:4 type BI to match the existing surface.

Easing andAdjusting aluminium door and window including refixing beading after replacement of defective portions such as door closer, aluminium handles, hinges, locks, new rubber gasket, aluminium beading, preleminated prarticle board, sheet glass etc complete. all as specified & as directed by Engineer-in-Charge. Notes : Door closer, door spring, aluminium beading, preleminated gasket, aluminum beading, preleminated particle board, sheet glass shall be measured and paid separately under respective item of schedules.

S&F of 12 mm thick particle board preleminated on both side decorative choice etc complete all as specified and as directed

S&F of floor door spring etc complete all as specified and as directed

S&F of door closer hydraulically regulated design No 2etc complete all as specified and as directed

S&F of Mortice lock vertical type 4 lever etc complete all as specified and as directed etc complete all as specified and as directed

S&F of Rubber gasket for fixing aluminium door and window shutters etc complete all as specified and as directed

S&F of aluminium beading for fixing of aluminium door and window shutter etc complete all as specified and as directed

S&F of 150 mm long aluminium tower bolts for aluminium door and window shutter etc complete all as specified and as directed

S&F of aluminium handles 150 mm long for aluminium door and window shutter etc complete all as specified and as directed

S&F of aluminium handles 100 mm long for aluminium door and window shutter etc complete all as specified and as directed

S&F in repair curtain rods with mild steel conduit pipe 25 mm bore with covering of PVC sheet with fancy eves with wall thickness 1 mm thick incl MS chromium palted brackets holders or screwed to pelmet boxes or to fixed in walls incl domes and side walls complete all as specified and directed

S&F in repair MS chromium plated tubular towel rail 20 mm dia ‘D’ type 60 Cm long between flanges to wall with chromium plated brass screw, washers and nylon sleeves complete all as specified and directed

S&F in repair 18/19 mm thick block board of commercial quality Gde-1 fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and directed

Petty repairs to leaking water in bib taps, pillar taps, stop cock , angle valve, PVC connection waste pipes, float valves, concealed stop cock. GI pipe joints bottle traps etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed

M&L for repairs to rolling shutter including necessary gressing, welding, locking arrangement including serviceing to gear box etc complete as to bring in service condtions etc all as specified and directed

M&L for repairs to collapsible steel gate including necessary gressing, welding, locking arrangement including serviceing etc complete as to bring in service condtions all as specified and directed

S&F Toilet paper holder model NL 55 make ESS ESS or equivalent.

S&F Acrylic shelf 46X13cm make ESS ESS model (TM 07) chrome or equivalent complete all as specified.

S&F in repair corner shelf with CP railing 300mm x 300mm complete all as specified

S&F in repair CP jet for EWC along with pvc connection complete all as specified.

S&F CP brass Health faucet with 15mm bore pipe all as specified.

S&F for CP brass liquid soap container fixed with and incl CP brass screws.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or any insulations boards/slabs/blankets, any thickness, including cover fillets.

S & F 605x605x6mm thick Non asbetstors fiber cement building boards in Aluminium snap grid 600x600mm powder coated fixed in slope/flate Ceiling shall be hanged to RCC roof, roof truss/purline rafters with the help of GI Wire not less than 4mm dia at an interval n.exc 1 mtr size of complete all as specified & directed.

M&L for clip in type Armed Strong powder coated 0.5mm thick ceillig with GI frame made up of standard tee, angle or any other section as in grid type ceilling frame work as approved by GE . Ceilling shall be hanged to roof truss/purline rafters with the help of GI Wire not less than 4mm dia at an interval n. exc. 1mtr the size of metalic powder coated ceiling tiles 600x600mm size complete all as specified .

Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed

M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge

Demolition of cement concrete (un-reinforced) in any description and in any postion incl tiles if any not other wise otherwise specifically provided for

M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings including necessary use and waste formwork, weathering, slightly rounded or chamfered angles and throating etc complete all as specified and directed

M&L 75mm thick PCC 1:4:8 type D-2 using 40mm graded stone aggregate as sub base of floor all as specified..

M&L Machine pressed precast concrete interlocking paver block any shape and size confriming to IS 15658-2006 of 60 mm thickness , M-35 grade with Grey Cement and no pigment, laid over 20 mm thick sand cushion all as specified.(Sand cushion will be measured and paid seprately).

M&L for sand cushioning including watering and consolidations etc complete all as specified and as directed

Dismantling of granite/Chequered tiles including cement motrar bedding cement mortar bedding (but not backing ) removing serviceable stone to store and rubbish off the premises.

M&L for granite (of any type) stone slab 12 to 14 mm thick machine cut and machine polised, as in Dado , skirting, etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and directed.

M&L for 15mm thick in CM 1:4 as backing coat of dado/skirting etc complete all as specified and as directed

M&L for 20-25 mm thick chequered designer coloured tiles, Size, colour and shape as approved by GE, set and jointed in neat cement slurry and pointed with coloured cement to match etc complete all as specified and as directed

Demolition of stone slabs and tiles in any position all as specified and directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete

M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed.

M&L 25mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in sub base of floors.

S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

S&F Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed

Removing building materials (debries) etc. (other than spoil payable under Section-3—Earthwork) to a distance exc 3Km but n. exc 5Km, beyond the lead included in the rates, including loading, unloading and stacking at the destinationcomplete all as specified and directed.

Dismanting of rolling shutter

S&F 1.25mm thick Steel rolling shutters, gear operated type with bevel gear box and crank handle, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified.

S&F Safety lever locks mild steel with 4 levers incl ball bearing for rolling shutters complete all as sspecified and directed.

Dismantling of PVC wall panelling

M&L for solid colour wood grain printed PVC sheets 5mm thick as in wall panelling inclusive of solvent cement incl necesssary PVC frame work for fixing on brick or concrete wall with all as specified and as directed , Make :- Rajshree/Sintex

Removal existing roof treatment etc (APP membrane) and including taking down of cement plaster on roof.

M&L15 mm thick rendering in CM 1 : 4 on roof top of concrete surface including finishing the surfaces even and smooth without using extra cement with water proofing compound as per manufacture instruction etc. complete all as specified. Note: WPC shall be measured and paid seperately.

Supply only WPC

M&L PCC 1:2:4 tpye B-1 using 20mm graded stone aggregate as in copping benching gola and the similar items complete all a specified and as directed.

M&L for 3mm thick APP modified prefabricated membrane in five layers & weight not less than 3.6 Kg/Sqm water proof membrane reinforced with non-wooven polyster two coats of aluminium paint over top surface of water proofing membrane with 10cm longitudinal and horizontaling over lapping and joints finally thermo-fused with LPG flames laid over and inluding a tack coat of bitumen primer @ 0.30Kg per Sqm as per manufacturer's instructions of APP modified membrane sheet complete all as specified and directed.

S&F in repair 15mm bore Two in one angle valve cast copper alloy chromium plated, fency type, scewd down high presure, screwed both ends for iron or for union complete all as specified

S&F in repair 20mm Gun metal glove or gate valve with iron wheel head scrwwed both ends for iron or for union complete all as specified

S&F in repair 20mm PVC ball valve high presure with epoxy coated aluminium road and high density plastic ball both ends for iron or for union complete all as specified

Cleaning of blockage of S trap P traps floor traps Gully traps, Nahani trap and WC etc without disturbing existing system and removal of all blockage Complete all as directed

Desludging of manholes manually by removing all scales loosed material s and sludge taken out from camp area and removing in covered container away from the camp and cleaning the same with water manhole not exc 1m depth complete all as directed

Ditto all as per item No 148 but exc 1m not exc 3m depth

Ditto all as per item No 148 but 150 user septic tank

Ditto all as per item No 148 but 100 user septic tank

Ditto all as per item No 148 but 25 user septic tank

Cleaning and desludging of existing sewage line of 150mm to 200 mm bore and depth upto 3.00mtr from manhole and Gt to manhole complete all as directed

Dewatering of soak well 2.40 mtr dia and 6 Mtr depth all as directed

S &F in repair concertina coil of 900mm dia with warbed tape of 0.5mm thick galvalined steel sheet or core wire of dia 2.5mm dia high tensile steel wire including Galvalnized staples/clips for tying at crossing all as directed

S& F in repair Galvanized 2 Strand steel barbed wire 2.24 mm dia barbed with 2mm dia at 75 mm speacing all as directed

E/M WORKS Taking down carefully old copper/alluminium point, wiring (light, fan, socket or power) complete, including fitting such as switches, ceiling roses, pendants, regulator socket tube light fitting of any type, Bulk head fitting etc segregation serviceable fitting/fixture and keep them safe custody for reuse and removing materials from the site and making good disturbed surface of walls&floors etc as per existing specification complete all as directed

Taking down old unserviceable main switch, DB's/RCBOs/MCCB/Sheet Metal Enclosures including MCBs & wooden/GI/MS sheet board etc and removing materials from the site of work complete all as directed

Taking down old unserviceable sub main wiring any size/core/type of copper/alluminium conductor. including making good the disturbed surfaces and removing materials from the site of work complete all as directed .

Taking down carefully Single phase Electronic metre and removing materials to store for keeping in safe custody for reuse or for taking credit and making good disturbed surface of walls, floors etc.

M&L for point wiring complete with stranded copper conductor 1.5 Sq. mm size (Nominal area) PVC insulated unsheathed cable 650 volts grade conforming to IS drawn in and including medium duty concealed in PVC conduit conforming to IS and ISI marked not less than 19 mm dia with concealed including single core stranded copper conductor 1.5 sqmm PVC insulated unsheathed cable as earth wire to common earth and connected to earth dolly drawn in same concealed conduit complete all as specified for :-

(a) One light point/bell point/one fan/exhanust fan controlled by one,one way switch.

(b) For one 5 pin, socket outlet 5/6 amp on independent board with other switches

(c) For one 3 pin socket outlet 5/6 amp on same board

M&L for point wiring complete with stranded copper conductor 4 sqmm single core (nominal area ) PVC insulated and unsheathed cable 650 volts grade drawn in and including medium duty concealed in PVC concealed conduit conforming to IS and ISI marked not less than 19 mm dia with 1.6mm thick concealed pressed steel terminal boxes with plate and framecover for rquired module including single core stranded copper conductor 2.5 sqmm PVC insulated unsheathed cable in same conduit as earth wire to the common earth and connecting to earth dolly all as specified for one 6 pin socket outlet two in one 16/6 amps on an independent board.

M&L for switch piano, flush type single pole one way 5 amps complete all as directed by Engr - in - charge.

Refixing of switch piano, flush type single pole one way 5 Amp complete all as specified(Note :- Old serviceable material shall be obtained from Ser item No 1 here in before for reuse.)

S&F Bell push flush type 5 Amp complete all as directed by Engr - in - charge.

M&L switch socket combination 2 in 1, 5 Amp Flush Type 5 pin multipurpose suitable for independent board complete all as specified by Engr-in-Charge

Refixing of socket combination 5 pin multipurpose 5 A(Independent) flush type complete all as specified by Engr-in-Charge (Note :- Old serviceable material shall be obtained from Ser item No 1 here in before for reuse.)

M&L socket outlet 2 in 1,3/5 pin 5 Amp Flush Type multipurpose suitable for same board complete all as specified by Engr-in-Charge

Refixing of socket outlet 5 pin multipurpose 5 A(same board) flush type complete all as specified by Engr-in-Charge (Note :- Old serviceable material shall be obtained from Ser item No 1 here in before for reuse.)

M&L switch socket combination 2 in 1, 5 pin multipurpose 16 A , flush type.

Refixing of switch socket combination 2 in 1 5 pin multipurpose 16 A flush type complete all as specified by Engr-in-Charge (Note :- Old serviceable material shall be obtained from Ser item No 1 here in before for reuse.)

Supply & fix submain wiring alongwith earth wire single core multi stranded copper conductor FRLS unsheathed PVC insualted 1100 V grade cable drawn into and including PVC casing capping sleeves and caps of adequate width and length with accessoris and fittings like bend, crosses wall crossing etc 2x 4.0 sqmm 1x 2.5 sqmm wire Make of wire: Havells/Plaza/Finolex. Make of PVC casing capping: Plaza/Horse/Pesto plus Note : 2 Run 4 Sqmm & 1 Run of 2.5Sqmm shall be measured as single run

M&L PVC/Wooden blocks as suitable to site condition for fixing tube light fitting on wall/ceiling complete all as directed by Engr-in-Charge.

S&F in replacement of tube light fitting 1X20 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS20WLED865SPCSSor equuivalent make of phillips,Crompton,Bajaj, vipro.

S&F in replacement of tube light fitting 1X10 w,LED Batten wall mounted with alumunium housing and integrated electronic driver . Make havells cat part no LUMLINEPLUSBS10WLED865SPCSSor equuivalent make of phillips,Crompton,Bajaj, vipro

S&F sheet metal enclosures for DB-4 way, SPN, 200 Amps Bus bar 240 Volts single door

S&F sheet metal enclosures for DB-08 way, SPN, 200 Amps Bus bar 240 Volts Single door

S&F sheet metal enclosures for DB-12 way, SPN, 200 Amps Bus bar 240 Volts Single door

M&L MCB SP 240 volt, 5 to 32 Amps, B series, 10 KA Make : Havell's / Plaza / Legrand

M&L MCB SPN 240 volt, 5 to 32 Amps, B series, 10 KA .Make : Havell's / Plaza / Legrand

Re fixing of MCB SP /SPN of any type and capacity all as directed by Engr-in-Charge

S&F electronic type fan regulator . Make : Anchor/Surya/Havells

Re-fixing electronic type fan regulator complete all as specified and directed by Eng-in-Charge

M&L ceiling rose , single phase /PVC /Polycarboante isolated body.

Re fixing of Ceiling rose all as directed by Engr-in-Charge

S&F Bell Multi Music type Make : Anchor/Surya/Havells

M&L for earthing complete with galvanised steel earth plate electrode 60cm X 60cm X 6mm thick, buried directly in ground (earth pit not less than 2.25 meters deep below ground level) with top edge of the plate not less thatn 1.5 meters below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers GI earth wire with protected by 15mm dia light grade GI pipe and other end connected to earth testing point or main controlling switch as directed incl funnel with watering pipe 20mm bore light grade GI pipe, wire mess , charcol and common salt, concrete earth pit in PCC (1:3:6) type C1 cast iron frame cover , including necessary excavation, earth work in soft/loose soil and disposal of soil to a distance not exc 50mtr and necessary testing complete all as shown in electrical plate No 3 of MES schedule Part I and testing all as directed.

Fixing only and connecting Electric meter upto 25 Amps

S&F Higly efficient LED Bullbs of 15 W

S&F in replacement of Decorative wall light fitting made up of high grade engineering plastic material suitable for LED Lamp 15/20 WATT. All as directed. Make : Havelles cat part No LHFDGBE1TZ1W035 or equivalent make f philips/CG/Vipro

M/S RK Builders

KISHAN SINGH AND CO

M/S Rohit Enterprises