REPAIR / MAINT OF ROOF, FLOORING, FALSE CEILING, JOINERY, SANITARY FITTINGS, PLUMBING AND PETTY REPAIRS WORKS TO MD ACCN OF SITE-II, SITE-III AND MES QUARTERS UNDER AGE B/R-II AT FATEHGARH CANTT

Amount

Demolition of brick work or stone / boulder masonary built in cement mortar including all quoins arches ,pillars etc. complete all as specified and directed.

M&L Brick work with sub class 'B' bricks , straight or curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed.

M&L for brick work using old size bricks (Except brick) straight or curved on plan exc. 6m mean radius built in cement mortar 1:6 complete all as specified and directed. (Serviceable bricks reuse as obtained from item No.1)

Demolition of cement concrete of ground floor in any position not otherwise specifically provided complete all as specified and directed.

M&L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, finished even and smooth using extra cement complete all as specified and directed.

M&L Cement concrete 1:3:6 type C2 using 40mm graded stone aggregate in plinth protection, 50 mm thick, finished even and smooth without using extra cement, including making joints 12mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen and sand 1:3 by weight complete.

Dismantling of floor hearth or wall tiling of any type including cement mortar bedding but not backingcomplete all as specified and directed.

S&F Glazed ceramic coloured tiles 300mm x 200mm x 5mm to 6mm thick, in floors, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles as in vertical surfaces of skirting / dado complete over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

S&F Glazed ceramic coloured tiles 350mm x 250mm x 7mm thick / 450 mm x 300 mm x 7 mm as in floors, etc set and jointed in neat cement slurry and pointed in coloured cement to match tiles as in vertical surfaces of skirting / dado complete over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed or bedding layer in cement mortar (1:4) complete all as specified and directed.

M&L for 20 mm thick granite (of any type) work (table rubbed and polished)_ in steps, jambs, pillars, window cills, cooking plateforms and like in cement mortar (1:4) including pointing in white cement (1:2) usingmarble dust with mixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of cement concrete (Reinforcement) of any description complete all as specified and directed.

S&F in repair framed brackets of angles of tees with web and flanges cut to shape, drilled and counter sunk for screw, including bending and welding angles, as necessary gussets plates, reivting etc n.exc. 10 kg each brackets, conforming to Fe-290 gde E-165 including fixing to wall with rawl plug to walls complete all as specified and directed.

M&L for cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting exceeding 20 cm girth complete all as specified and directed.

Taking down cement plaster of any description built in cement mortar of any description complete all as specified and directed.

M&L for 15 mm thick cement plastering in CM 1:6 on brick or concrete surfaces fair finished the surfaces even and smooth without using extra cement complete all as specified and directed.

All as per item No. 16 above but in CM 1:4 complete all as specified and directed.

M&L for 5 mm thick cement plastering in CM 1:3 on ceiling and finished the surface even and smooth without using extra cement complete all as specified and directed.

M&L for three coat of white wash on new plastered surface of wall including preparation of surface complete all as specified and directed.

M&L for two coat of oil bound distemper on new plastered wall surfaces over a coat of white cement primer and applying 3mm thick wall care putty including preparation of surface complete all as specified and directed.

M&L for two coats of cement base paint over a coat of white cement primer on new plastered wall surface including preparation of surface complete all as specified and directed.

M&L for three coat of white wash on new plastered ceiling surfaces including prearation of surface complete all as specified and directed.

Taking down chowkats with shutter n. exc.1.50 Sqm each (without taking off shutter from the chowkhats) complete all as specified and directed.

All as per item No. 23 above but exc. 1.50 sqm but n. exc. 4 Sqm each complete all as specified and directed.

Taking down shutter of any description exc. 1.00 Sqm but n.exc. 2.00 Sqm complete all as specified and directed.

Taking down shutter of any description not exc. 1.00 Sqm each complete all as specified and directed.

S&F mild steel framed work of angle or any other section (grade 410 - 0 or Fe-310-0) as in door and door frame, gates of angle frame work etc including necessary welding etc complete all as specified and directed.

S&F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing complete all as specified and directed.

M&L for PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in fixsing of hold fast including necessary use & waste of form work complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,panelling of plain colour PVC sheet to be fitted inthe MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F factory made 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels commerical type on both sides complete all as specified and directed.

S&F 35 mm thick factory made glazed & skelton shutter of 2nd class hardwood open rebated and prepare to receive glass, gauge etc (with sash bar) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass gauge etc size of members of shutters as specified in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chowkats complete all as specified and directed.

S&F factory made second class hard wood 30 mm thick glazed and skeleton shutters, open rabated and prepared to received glass, gauze etc with out sash bars edges of raming plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauge etc sizes of members of shutters as specified in SSR part-I section 8 clause 8.24(a) complete all as specified and directed.

S&F factory made second class hard wood 30 mm thick glazed and skeleton windows, ventilators shutters, open rabted and prepared to received glass, gauze etc devided into square with plain, chambered or rounded, mitered and rebated with sash bars, any numbers edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc size of members of shutters as specified in SSR part-I section 8 clause 8.24(b) complete all as specified and directed.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks complete all as specified and directed.

S&F stainless mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.00 mm fixed with tinned tacks complete all as specified and directed.

S&F aluminium anodized barrel tower bolt of extruded section 150 mm long complete all as specified and directed.

S&F in repair aluminum anodized barrel tower bolt of extruded section100 mm long complete all as specified and directed.

S&F aluminium alloy handle cast type anodized of size 150 mm long complete all as specified and directed.

S&F in repair aluminum aloy handle cast type anodized of size 100 mm long complete all as specified and directed.

Supply & Fixing in repair butt hinges medium weight cold rolled mild steel 100 mm size complete all as specified and directed.

S&F in repair (welding if repair or fixing in wooden chowkhat as per site requirement) butt hinges medium weight cold rolled mild steel 100 mm size complete all as specified and directed.

S&F 100 mm butt hinges extruded aluminium alloy with galvanized mild steel hinges pin, anodized and fixed type B-21 complete all as specified and directed.

S&F 300 mm long mild steel sliding door bolts, plate type, stove enamelled black with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts four on bolts plate and two on staple plate and fixed complete all as specified and directed.

S&F in repair 250 mm long aluminium alloy, anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sectionsand fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed.

S&F in repair 300 mm ordinary rat tail made out of MS rod battern spring including roller and roller plate complete all as specified and directed.

S&F in repair curtain rod PVC coated anodized aluminium alloy rod 25 mm bore with fixing fancy type brackets, stops,rollers, side dooms etc complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 15 mm bore of pipe complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning if refixing required for 20 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 15 mm bore pipe complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) or 15 mm bore of pipe complete all as specified and directed.

S&F GI tubes medium grade with all fittings fixed to walls and ceiling or laid in floors of 20 mm bore pipe complete all as specified and directed.

Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) or 20 mm bore of pipe complete all as specified and directed.

S&F in repair 15 mm gun metal, gate or globe valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based sufaces of any description over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of wooden pink primer complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of steel of any description over 10 cm in width or girth and apply two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F for steel windows or ventilaors, fixed type, with glazing bars complete all as specified and directed.

S&F for steel window with side hung shutters including projecting type hinges with steel handle, and steel peg stay complete with glazing bars, dovetailed or welded complete all as specified and directed.

S&F for steel window with side hung shutters including projecting type hinges with steel handle and steel peg stay complete without glazing bars, dovetailed or welded complete all as specified and directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden / steel frame glazed with putty of fixed with beads complete all as specified and directed.

S&F 3 mm thick sheet glass, ordinary quality and glazing with mitred beads or oil putty incuding glazing clips in square not exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3 mm thick figured glass, pin head type and glazing with mitred beads or oil putty incuding glazing clips in square not exc. 0.50 sqm in each pane complete all as specified and directed.

S&F in repair vitreous china water closet squatting pan "Orrissa pattern" white of size 580 x 440 mm with internal foot rest with 'P' or 'S' trap for 100 mm pipe (excluding flush pipe and flushing cistern) complete all as specified and directed.

S&F in repair for PVC low level flushing cistern 10 litre capacity with cyphonic, action type PVC float valve, brackets and 32 mm bore PVC flush pipe etc including PVC connection 450 mm long complete all as specified and directed.

S&F in repair 15 mm dia bib tap standard of PTMT any colour screwed for iron pipe and fixed (minium weight 90 gms) complete all as specified and directed.

S&F in repair CP bib taps, long screwed shank (fancy type) 15 mm bore cast copper alloy, screwed down high pressure screwed for iron pipe or brass ferrule complete all as specified and directed.

S&F in repair angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed of size 15 mm complete all as specified and directed.

S&F in repair 15 mm dia stop valve standard of PTMT any colour screwed for iron pipe and fixed (minium weight 15 mm - 90 gms) complete all as specified and directed.

All as per item No. 68 above but CP concealed type with long screwed shank and capstan head for (Bath shower) complete all as specified and directed.

S&F in repair CP shower of 75 mm dia rose for 15 mm bore pipe complete all as specified and directed.

S&F in repair PVC connection 15 mm size with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe, fency type complete all as specified and directed.

S&F in repair 20 mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min wt. 20 mm 210 gm) complete all as specified and directed.

S&F for rotational moulded polyethylene water storage tank vertical with closed top of 500 ltrs capacity and fixed in position all as specified in SSR part-I including disconnecting existing tanks complete all as specified and directed.

S&F in repair CP brass towel rail 'D' type 60 cm long fixed to wall complete all as specified and directed.

S&F in repair vitreous china wash hand basin white flat back of size 500 x 400 mm including brakcet, waste coupling 32 mm dia and waste pipe complete all as specified and directed.

Supply and fix in repair 15 mm bore pillar taps cast copper alloy with capstan head, chromium plated screwed down high pressure with or without lettered hot of cold with long screwed shanks and fly nuts screwed for iron pipe, fency type complete all as specified and directed.

Supply and fixing in repair 32 mm dia PVC waste pipe suitable for wash hand basin complete all as specified and directed.

S&F fixing in repair 0.63 mm thick plain galvanized mild steel sheeting fixed with screws as in crumple bathroom door, gully gutter etc joints complete all as specified and directed.

Dismantling framed work timber scantlings 40 Sq cm and over in section, in any position complete all as specified and directed.

M&L for 2nd class hard wood scantling as in frame work complete all as specified and directed.

Dismantling of asbestos cement, (corrugated or semi corrugated etc) sheeting in roof covering complete all as specified and directed.

M&L for 6 mm thick asbestos cement, corrugated or semi corrugated sheets in roof, fixed with L type or J type or cranked hook bolt complete all as specified and directed.

M&L for pre-painted zink coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, fixed with self taping screw complete all as specified and directed.

M&L for pre-painted zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation board / slabs / blankets any thickness including cover fillets complete all as specified and directed.

S&F 6 mm thick asbestos cement plain building boards, fixed to timber frame work with screws on ceiling complete all as specified and directed.

S&F plain fillets clean sawn square, rectangular or triangular, section fixed with nails (second class hard wood cross sectional area exc. 6 sqcm n.exc. 13 sqcm) including two coat of synthetic enamel paint over a coat of wood primer complete all as specified and directed.

S&F plain fillets clean sawn square, rectangular or triangular, section fixed with nails (second class hard wood cross sectional area exc. 3 sqcm n.exc. 6 sqcm) including two coat of synthetic enamel paint over a coat of wood primer complete all as speci

Taking out existing treatment like felt etc and cleaning the surface of roof having brick tiles by roughening, sweeping clean and washing down and applying cement slurry @ 3 Kgs / sqm complete all as specified and directed.

M&L for 25 mm thick cement concrete 1:2:4 type B-0 (12.5 mm graded stone aggregate) as in RCC roof surface with mixing of water proofing compound 3% by the weight treatment take fallet cement to horizontal or verticdal sufaces finished cement concrete surface even and smooth using extra cement including necessary form work (water proofing compound will be measured and paid separately) complete all as specified and directed.

M&L applying water proofing treatment to roof slab with APP modified polymeric membrane with centre core 100 micron HMHDPE out film 20 micron each having thickness 3 mm, weight not less than 3.00 kg / sqm with 100 mm side overlap and 150 mm end lap and laid with following course of description as below :- (a) Applying evenly a coat of bituminous primer conforming to IS 3384-1965 @ 0.50 ltr / sqm prepared surface till the surface is properly impregnated and solvent oil in primer shall be allowed to evaporate completely. (b) Second coat of bonding material using hot air blown grade bitumen 85/25@ 1.2 kg / sqm conforming to IS-702-1988 over bituminous primer. (c) Third course i.e. laying APP modified polymeric membrance describe here in before with 100 mm overlap in longitudinal direction and 100 mm in transverse direction. (d) Applying two coat of aluminium paint @ 100 gm/Sqm in each coat (minimum) as per manufacturer’s instructions and guidance complete

Supply only liquid water proofing compound of ISI marked complete all as specified and directed.

S&F built in steel cupboard (shutter and frame) of pressed steel frame of size 75 mm x 45 mm x 1.25 mm thick with pressed steel shutter 1.00 mm thick godrej pattern inlcuding lock, handle and key in duplicate fixed to masonary walls by hold fast made out of 25 x 3 mm F1 embeded in PCC 1:2:4 type B-1 complete including two coats of spray painting over a coat of red oxide primer on steel surfaces after taking out of old existing cupboard frame with shutters complete all as specified and directed.

S&F 19 mm veneered particle boards interior grade, solid core, general purposes type, with face of decorative veneers on both sides fixed as in shelves complete all as specified and directed.

S&F angle, joist, channel or tee sections fixed independently without connecting plats etc (Fe-290 Gde-E-165) complete all as specified and directed.

Demolition and breaking up drain pipes 100/75 mm dia (salit glazed ware, AC or reinforced conc PVC) set in cement mortar fixed in any position complete all as specified and directed.

S&F 100 mm dia GI pipe as in spouts fixed to parapet walls on roof terrace, including setting in cement concrete 1:2:4 and making necessary repairs complete all as specified and directed.

S&F in repair vitreous china pedestal pan and trap including anti syphonage pipe, PVC seat cover etc complete all as specified and directed.

S&F for door seal 0.80 mtr to 1.20 mtr long with brush complete all as specified and directed.

S&F in repairs CP health faucet with 1 mtr tube and hook complete all as specified and directed.

S&F in repair 15 mm brass CP mixer (single hole) for mixing hot & cold water screwed down for iron pipes and fixed in repairs complete all as specified and directed.

S&F in repair plastic water closet seat, back, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC jet connector suitable for EWC complete all as specified and directed.

M/s Moti Babu Agarwal

M/S SRI JAGDAMBE TRADERS

Singh Contractor and Supplier

M/S WASEEM KHAN CONTRACTOR