GE(P)AF/GUR-31/2020-21

Amount

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) n.exc. 1.5 Sqm each complete all as specified and as directed by Engr-in-charge.

Taking down chowkhat or frames with shutters (without taking off shutters from the frame) exc. 1.5 Sqm but not exc 4.00 sqm each complete all as specified and as directed by Engr-in-charge.

Taking down shutters only exc 1 Sqm and n.exc. 2 Sqm each complete all as specified and as directed by Engr-in-charge.

S&F 30mm thick factory made flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both the faces, ISI marked complete all as specified and as directed.

S&F 35mm thick factory made flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both the faces, ISI marked complete all as specified and as directed.

S&F 40mm thick factory made flush shutter, solid core construction, with particle board core and plywood face panels, commercial type on both the faces, ISI marked complete all as specified and as directed.

S&F anodised aluminium window in repairs with sliding shutters /fixed type as per STD drawing with section of 16 guage including necessary jointing cleats, glazing clips, rubbers packing anodised aluminium snap beading, screw, powder coated aluminium anodised fittings complete all as specified and as directed by Engineer-in-Charge.

S&F PVC door frame of size 50x47mm with a wall thickness of 5mm made out of extruded 5mm rigid prelaminated PVC foam sheet mite cut at two corners and jointing with 2 Nos of 150mm long brackets of 15x15mm MS square tube of two vertical door profiles are to be reinforced with 19x19mm MS square tube of 19 guage WPDM rubber gasket weather seal tobe provided throughout frame the door frame shal be fixed to the wall using 100mm long MS screws through the frame by using PVC fastners. A minimum of 04 Nos screws to be provided for each vertical members and minimum 02 Nos of horizontal members,Make:-Rajshri,Sintex or Equivalent.

S&F for 30mm thick factory made solid panel prelaminated PVC door shutter consisting of frame made out of MS tube of 19 guage thickness and size of 19x19mm for styes and 15x15mm for topo and bottom rails. MS frame shall have a coat of steel primer of approved make and manufacturer. MS frame adhered with 5mm thick heat moulded PVC `L' channel of size 30x75mm forming styles and 5mm thick, 100mm wide PVC sheet for top rail lock rail and bottom rail on either side and 5mm thick 20mm wide PVC sheet as gap inserted for top rail and bottom rail. panelling of 5mm PVC sheet to be fitted in MS frame to the styles and rails with 5mm thick 30mm wide PVC sheet beading on either side and jointed together with solvent cement adhesive etc Complete all as specified and as directed by Engineer- in- Charge.

S&F in repair 18/19 mm thick prelaminated particle board interior gde prelaminated one side with with decorative choice and other side white lamination fixed with screws as in cup board shutters & shelves and pelmet boxes etc complete all as specified and as directed by Engineer-in-Charge. Make : Duro/National/Archid Ply wood.

S&F in repair 25 mm thick Block board interior Gde 2 quality commercial type decorated face veneer on one face fixed with screws as in cup board shelves etc complete all as specified and as directed by Engineer-in-Charge. Make : Duro/National/Archid Ply wood.

S&F 2nd class hard wood plain fillets not exc 3 sqcm sectional area, square, rectangular or tringular in section, wrought fixed with nails complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 100 mm long,designer pattern ss handles for fixing in cupboards complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, Magnet catch for fixing in cup board complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs, 50 mm long stainless steel butt hinges complete all as specified and as directed by Engineer-in-Charge.

Taking down old Aluminum windows of any description size exc.1.5 sqm but not exc. 4.00 sqm and M&L for complete overhauling of the glass pane/rubber beeding/aluminu glazing clip if necessary/locking system incl.necessary oiling and adjustment etc and refixing in same location complete all as specified and as directed by Engineer-in-Charge. Note :- Glass Pane/rubberbeeding/aluminum beeding will be measured and paid separately under subsequent items.

All as per item No 16 here-in-before but n.exc 1.5 Sqm.

S&F in repair rubber beeding to be fixed over glass panes in Aluminum widows complete all as specified and as directed by Engineer-in-Charge.

S&F in repair, aluminum anodised glazing clip to the alumiinum window frames after fixing the glass panes complete all as specified and as directed by Engineer-in-Charge.

Dismantling structural steel work incl. steel door,gate,window guard bars,grills etc. complete all as specified and as directed by Engineer-in-Charge.

M&L for fabricated frame work as in doors of gate of angle iron or other section with gusset plate rails, braces etc. complete drilled for fixing steel sheeting or other covering door etc to be prepared for hanging with and including hinges (Exclusive of steel sheeting or other covering and fixing complete) complete all as specified and as directed by Engineer-in-Charge.

M&L for mild steel works as in grills and railing of Fe-410-0or Fe 310-0, complete all as specified and as directed by Engineer-in-Charge.

M&L for PCC for 1:2:4 type B-1 (using 20mm graded stone aggregate) as in coping, benching & for fixing railing, holdfast etc including necessary form work complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass (any th size, quality or description) from wooden or steel frames glazed with putty or fixed with wooden beads complete all as specified and as directed by Engineer-in-Charge.

S&F sheet glass 4mm thick of best quality and glazing with clip complete all as specified and as directed by Engineer-in-Charge.

S&F in repair for Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of apoerture 1.40mm and fixed with aluminium/woodem/steel beads complete all as specified and as directed by Engineer-in-Charge.

S&F stainless steel medium weight butt hinge ISI Marked 100mm size, fixed with screw complete all as specified and as directed by Engineer-in-Charge.

S&F as in repair stainless steel medium weight butt hinge ISI Marked 100mm size, fixed with screw complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs, MS Helical door spring 300 mm long complete all as specified and as directed by Engr in Charge. (Note:-Helical spring will be fixed by welding)

S&F 75 mm butt hinges made up of extruded anodised aluminum, complete all as specified and as directed by Engineer-in-Charge.

S&F extruded anodised aluminum alloy handle 150mm long fabricated type complete all as specified and as directed by Engineer-in-Charge.

S&F anodised aluminum barrel tower bolt of extruded section 150mm long complete all as specified and as directed by Engineer-in-Charge.

S&F aluminum alloy sliding door bolt 300mm long with hasp, staple (bolt type) adnd fixing clips of sheets, cast of exctruded sections and fiing bolts or extruded section and complete all as specified and as directed by Engineer-in-Charge.

S&F in repair telescopic drawer channel 19" long complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 300mm long MS Stove enamelled black with 16mm dia sliding door bolt with and including 06 No bolt and nuts, four on bolt plate and two on staple plate, complete all as specified and as directed by Engineer-in-Charge.

S & F in repair floor door stopper of size 75 mm long aluminium alloy body and tongue, anodized with hard drawn steel spring incl cleats etc fixed to door complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs 25mm dia alluminium powder coated curtain rods including cutting and fixing complete all as specified and as directed by Engr-in-Charge.

S& F in repairs designer pattern wall bracket suitable for 25mm dia curtain rods complete all as specified and as directed by Engr in Charge.

S& F in repairs designer pattern side knobs suitable for 25mm dia curtain rods complete all as specified and as directed by Engr in Charge.

M&L preparation of new or previously untreated surfaces of wood of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of pink primer complete all as specified and as directed by Engineer-in-Charge.

M&L preparation of new or previously steel surfaces of any description not otherwise described width or girth and applying two coats of synthetic enamel paint over & incl one coat of red oxide primer complete all as specified and as directed by Engineer-in-Charge.

S&F contineous (piano) hinges, mild steel bright finish of 40 mm width of flaps(when open) complete all as specified and as directed by Engineer-in-Charge.

All as per srl item No 44 here-in-before but of size 900mmx600mmx5mm thick.

All as per srl item No 44 here-in-before but of size 800mmx600mmx5mm thick.

S&F in repairs aluminum door seal fixed to bottom of door shutters complete all as specified and as directed by Engineer-in-Charge.

Taking down 200 Ltr PVC loft tank, including disconnection from Existing GI tubing and float valves and cleaning the tank (Removal of silt and other particles) and refix the tank in same position all as specified and as directed by Engineer-in-Charge.

S&F in repair (HDPE) water storage LOFT Tank 200 Ltrs capacity in kitchen, hoisted and fixed in position all specified in MES Schedule Part-I, including tank nipple, union and lowering of unservicable Water Storage Tank with Float valve of any description complete all as specified and as directed by Engineer-in-Charge.

S&F repairs brass phase with washer including removing old unserviceable phase and fixing with solvent complete suitable for 15mm bore bib tab/stop cock complete all as specified and as directed by Engineer-in-Charge.

S&F repairs brass phase with washer including removing old unserviceable phase and fixing with solvent complete suitable for 15mm bore Piller tab/Mixer Valves complete all as specified and as directed by Engineer-in-Charge.

S&F in repair health fauset with double lock 1 meter brass plated stasinless steel flexible hose and wall hook complete all as specified and as directed by Engineer-in-Charge. Make Jaquar, Cat Part No 563 or equivalent out of make specified in list of make.

S&F in repair, High pressure connection pipes 18" long with chrome plated Checknut, complete all as specified and as directed by Engineer-in-Charge. Cat No-AE-06 of Make-nixo/Shakti or equivalent out of makes specified in list of makes.

S&F in repair, High pressure connection pipes 24" long with chrome plated checknut, all as specified and directed by Engr-in-charge. Cat No-AE-06 of Make-nixo/Shakti or equivalent out of makes specified in list of makes.

S&F Galvanised Steel Water Tubing 25mm Bore (dia), ‘Medium Grade’ with all ISI marked Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation including Taking up or down unserviceable Steel Water Tubing with Fittings and Connections, etc. complete all as specified and as directed.

S&F of SDR-11 CPVC pipe 20 mm dia fixed to concealed in wall ceilling,laid in floor etc incl all fittings and jointing with solvant and brass threaded fittings for fixing taps and valves etc and other situation including Taking up or down unserviceable Steel Water Tubing 15mm bore with Fittings and Connections, etc., complete all as specified and as directed.

S&F of SDR-11 CPVC pipe 25 mm dia fixed to concealed in wall ceilling,laid in floor etc incl all fittings and jointing with solvant and brass threaded fittings for fixing taps and valves etc and other situation including Taking up or down un serviceable Steel Water Tubing 20mm dia bore with Fittings, complete all as specified and as directed.

S&F as in repair Gun metal globe or gate valves with half turn lever, screwed both ends for iron pipe 20 mm bore and fixed complete all as specified and directed by Engineer-in-Charge : Make-SANT/KARTAR/Leader/Zoloto (duly ISI Markrd)

S&F as in repair Gun metal globe or gate valves with half turn lever, screwed both ends for iron pipe 25 mm bore and fixed, complete all as specified and directed by Engineer-in-Charge : Make-SANT/KARTAR/Leader/Zoloto (duly ISI Markrd)

S&F as in repair Gun metal globe or gate valves with half turn lever, screwed both ends for iron pipe 32 mm bore and fixed complete all as specified and directed by Engineer-in-Charge : Make-SANT/KARTAR/Leader/Zoloto (duly ISI Markrd)

Taking down up to 100mm dia PVC pipe and fitting from wall and floor of any description complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC SWR pipe laid to floor/ fixed to wall with rubber washer complete and fixed to clamp complete all as specified and as directed by Engineer-in-Charge.

S&F 75/80mm dia PVC SWR pipe laid to floor/ fixed to wall with rubber washer and fixed to clamp complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75mm dia out let multi outlet floor trap and fixed in floor complete including fixing with concrete and making good, complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm PVC SWR Bend including fixing with rubber washer complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm PVC SWR Bend with access door including fixing with rubber washer complete all as specified and as directed by Engineer-in-Charge.

S&F 75/80 mm dia PVC SWR Bend including fixing with rubber washer complete all as specified and as directed by Engineer-in-Charge.

S&F 75/80 mm dia PVC SWR Bend with access door including fixing with rubber washer complete all as specified and as directed by Engineer-in-Charge.

S&F 110mm dia PVC SWR Single branch/Tee with access door including fixing with rubber washer complete all as specified and as directed.

S&F 110mm dia PVC SWR WC connector with lip ring/bent type complete all as specified and as directed by Engineer-in-Charge.

S&F in repair 75/80 mm dia PVC SWR Single branch/Tee with access door including fixing with rubber washer complete all as specified and as directed.

S&F 32mm dia PVC LDPE pipe with fitting such as elbow/socket of pressure rating 6kgf/sqcm laid in wall and floor including cutting chase and fixing in complete and making good complete all as specified and as directed by Engineer-in-Charge.

S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 75 mm dia pipe and fixed to wall complete all as specified and as directed by Engineer-in-Charge.

S&F Stack Clamp GI Channel with 10mm dia U clamp with nut bolt and washer suitable for 110/100 mm dia pipe and fixed to wall complete all as specified and as directed by Engineer-in-Charge.

Dismantling of floor, hearth, or wall tiling including cement mortar bedding ( but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer-in-Charge.

M&L for Ceramic coloured/ printed non-skid tiles of size 7-8 mm thick( square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exec. 0.11 Sqm laid as in floors setting and jointed with neat cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:4) and pointed with coloured cement to match with surfaces of tiles complete all as specified and as directed by Engineer-in-Charge.

M&L for vitrified tiles tiles light shade 10mm thick (square/rectangular) polished, double charged area of each tile n.exc. 0.36 sqm, in floor etc.,set and jointed in neat cement slurry over 15mm thick screed bed in CM 1:4 and pointed in white or coloured cement with pigment to match for laying floor fineshes complete all as specified and as directed by Engineer-in-Charge.

M&L for Glazed Ceramic Coloured Tiles, 300X450X7mm to 10mm in size, set on Vertical Surfaces such as Skirting, Dado, etc,over and including 10mm thick screed bed in cement mortar 1:4 Set and Jointed in Neat Cement Slurry and Pointed in White or Coloured Cement to match the shade of the Tiles, complete all as specified and as directed by Engineer-in-Charge.

Dismaintling of Stone slabs and tiles of any description or thickness in floor orwall, aprons and laid badded and pointed in any mortar. Etc complete all as specified and as directed by Engineer-in-Charge.

M&L for 20 Granite (of any type) work (table rubbed and polished, rounded and chamfered ) in steps, jambs, pillars, window- cills, cooking platforms in full length upto 2.50 mtr and laid over and including 10 to 155mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite & making hole for gas pipe where required complete all as specified and as directed by Engineer-in-Charge.

Taking down and refixing of old serviceable water closet pedestal pattern after completion of Tile or other work with 75mm long Brass screw fixed in floor including pointing and making good complete all as specified and as directed by Engineer-in-Charge.

S&F in repair PVC dual flushing cistern low level of 10 Ltr capacity valveless, symphonic action type (white colour) with inlet, balll valve, float end handle including flush pipe of 32 mm bore MS chromium plated and connection to pipe etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair CP brass Bib Tap with Capston head complete all as specified and directed by Engr in charge. Cat part No: MMO-1020A of Make-marc or equivalent out of makes specified in list of makes.

S&F in repair, CP brass angle cock with Capston head complete all as specified and directed by Engr in charge. Cat No-MOR-1060A of Make-Marc/Prima or equivalent out of makes specified in list of makes.

S&F in repair, single lever sink mixer with swivel spout chromium plated brass, complete all as specified and directed by Engr in charge. Cat part No :MCR-204 of Make-Marc or equivalent out of makes specified in list of makes.

S&F in repair, 6mm thick Glass shelf (22x6") with Brass CP Bracket with brass nut, complete all as specified and directed by Engr in charge. Cat part No- ES01A of make-Nixo/hilife or equivalent out of makes specified in list of makes.

S&F in repair, 6mm thick glass corner shelf (12"x12") with C type Brass CP bracket, complete all as specified and directed by Engr in charge. Cat No-ES03A of Make-Nixo/Hilife or equivalent out of makes specified in list of makes.

S&F in repairs toilet paper holder of stainless steel fixed to wall with CP brass screws complete all as specified and as directed by the Engineer in Charge.

Taking down and refixing of old Mixer Valve (Wall Mixer/Wash Basin Mixer/Kitchen Mixer) after repairing/replacement of Water pipe line in same or different locationcomplete as all specified and directed. (MAKE : AGMECO/SONA/GEM or equivalent out of makes specified in list of makes).

S&F centre hole Brass CP mixer for mixing hot & cold WHB Mixer 15mm Bore (dia) screwed down for iron pipe and fixed including Taking down unserviceable WHB Mixer of any description, complete as all specified and directed. (MAKE : AGMECO/SONA/GEM or equivalent out of makes specified in list of makes).

S&F Wall Mixer 15mm Bore (dia) brass chromium plated without hand shower for mixing hot & cold, as Approved, fixing including Taking down unserviceable Wall Mixer of any description, complete as all specified and directed. (MAKE : AGMECO/SONA/GEM or equivalent out of makes specified in list of makes).

Taking down Cement Plaster from wall and ceiling of any description from Brick/concrete surfaces including raking out Joints, hacking for Key, scrubbing down with Water, etc., and removing same from the Site(s), complete all as specified and as directed. (Note :- Rate included for four storey building including skefolding and all safety measures)

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces including finishing even and smooth without using extra cement all as specified and as directed by Engineer in Charge.

M&L for preparing new plastered surfaces plastered on walls including cornices plasters and applying two coat of oil bound distemper over a coat of primer complete and over 1 to 2 mm thick birla putty punning complete all as specified and as directed by Engineer-in-Charge.

Note :- The amount of Rs 145400/- against Schedule of Credit on Srl Page 138 to 139 shall be deducted from the total amount quoted against Sch 'A'

a.k constructions

Satish Kumar Gupta

kailash chawla

M/S Parshant Associates

BRIJ MOHAN LAL AND CO.