Supply Installation Commissioning Testing of 01 No 20 M Galvanized LED High Mast Light Cabling and Repairing of LT Line Cable laying etc works at NMY Dadri

Supply & fixing of 20 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 4 mm. Top dia minium 150 mm, Bottom dia 410 mm base plate 32 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 to 12 luminaries & its control gear boxes 1.5 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect

Supply and fixing of 25 Amp. TPN of automatic street light cubicle control panel painted with anty corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses, isolating switch metering instrument & instrument box with CTs etc. in case TPN, complete in all respect.

Supply & fixing of factory wired integral LED fiood light luminaires with die cast Aluminium housing with Touhed glass luminaires UV Stablized PC cover and Lense built mandatory driver set suitable for 170 to 200 watt. Confiming to IP 66,IK 07 and above Protection complete in all respects. labour 20400 - 24000 system lumens high powar LED with lenses >120 lm/w,PF>0.95 THD<10% at Full load CRI>70,Pottde driver set (Not circuitory) Phase to Phase Protection at 440 V&>300 V auto cut and restart Feature , 4 KV internal Surge Protection with 5 years warrantee. CAT-AAA

Supply and fixing of single unit LED aviation obstruction light complete with transfarmer and LED spiral etc,complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served, sheathed cable 1100 volts grade on Wall surface as directed by the Engineer-Inchange, complete in all respect. The armoring of the cable shall be properly connected with the earthy conductor by clamps etc. 25 sq. mm. 3.5 core cable. 20c1.10

Supply and fixing of brass nickel plated compression gland for PVC insulated and armored served sheathed under ground cable i/c rubber ring etc. Complete in all respects. The armoring of the cable shall be properly connected with the earth as per direction of E/ I. 25 Sq mm 3.5 Core

Supply and erection of overhead line with ACSR conductor on poles/service bracket including binding etc. complete in all respects.

Tighting of ACSR conducter complete in all respect.

Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint .

Supply and erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia × 1.80 Metre long stay rod, 30 cm × 30 × 6.3 mm anchor plat, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete in all respects.