REPAIR REPLACEMENT OF WORN OUT PARTS PAINTING POLISHING OF STEEL AND WOODEN FURNITURE AND RECANNING OF CHAIRS AT JINDRAH AND DANSAL UNDER GE ARMY DHAR ROAD

Amount

WOODEN FURNITURE : Taking down worned out components of the following furniture items, S&F new component without having any defect as per shape and size as specified and shown on respective drawings and as directed by Engineer-in-charge

BED PLYTOP WOODEN (FD 246/247) ,

Head rest complete

Foot Rest complete

Long rail

Short rail

Stiffener

Right angled MS bracket 200mm long x 25mm wide x 3mm thick duly fixed with screw

12mm thick BWR Ply wood top in one piece

CHAIR DINING (FD-203/279)

Rear Leg

Front Leg

Side rail with holes for weaving

Front/back rail with holes for weaving

Bottom stiffener

Back stiffener

Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

Chair Dining for JCO/OR FD/MAP-II/05

Rear Leg

Front Leg

Side rail with arrangement for fixing of PVC Sheet

Front/back rail with arrangement for fixing of PVC Sheet

Bottom stiffener

Back stiffener

PVC Sheet seat of Make : Amko/Cello as approved by Enginner-in-Charge

Provn of wooden tringular bracket of size 75mm x 75mm x25mm at joint of leg and rail made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

CHAIR WRITING (FD-261/280)

Rear legs

Front Legs

Side rail with holes for weaving (spacing of holes shall be as per old one)

Front/back rail with holes for weaving (spacing of holes shall be as per old one)

Bottom stiffener

Back stiffener

Arm rest

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PVC/Rubber Shoe as per sample approved

CHAIR DINING OFFICERS (FD/E6/MAP/10 & FD/E6/MAP/10 (R)

Rear Leg

Front Legs

Back rail of seat frame

Front/side rails of seat frame

Seat made out of 75mm foam cushioned of 40 density covered with fabric as approved by Engr-in-Charge fixed on12mm thick ply

Bottom stiffener

Vertical back stiffener

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed with as directed by Engineer-in-Charge

PVC Shoe as per sample approved

CHAIR EASY(FD-229)

Rear Leg

Front Leg

Side Rail

Front/Back Rail

Arms rest

PVC Shoe as per sample approved

TEAPOY (FD-278/382)

Long rail

Short rail

Side stiffener

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

Provn of wooden tringular bracket of size 75x75x30mm at joint of leg and rail made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

PEG TABLE (FD-236/277/384)

Long rail

Short rail

Side stiffener

Provn of wooden tringular bracket of size 75x75x20mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

TABLE WRITING (FD-275)

Long rail

Short rail

Bottom centre stiffener

Bottom side stiffener.

Side of the box out of 18mm thick MDF board

Back of the box out of 6mm thick one side teak face commercial ply

Drawer as specified in drawing

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed with adhesive and screws as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

TABLE 900mm x 600mm WITH DRAWER and WITHOUT DRAWER (FD-283/284)

Long Rail

Short Rail

Bottom Side stiffener

Bottom Centre stiffener

Drawer as specified in drawing

Provn of wooden tringular bracket of size 75x75x25mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe as per sample approved

TABLE DINING 06 PERSON( FD-239/273)

Long rail

Short rail

Stiffener

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Provn of wooden tringular bracket of size 75x75x40mm at joint of leg and rail made out of hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

SIDE BOARD (FD-241/371)

Top made of 18/19mm prelaminated particle board with wooden beading to edges of the top

Bottom made of 18/19mm prelaminated particle board with wooden beading to edges of the top

Side made of 18/19mm prelaminated Particle board with wooden beading to edges of the top

Drawer made out 18/19mm thick prelaminated particle board at sides and 6mm thick commercial ply at bottom

Shutter made of 18mm thick prelaminated particle Board with hinges

Back made of 6mm thick commercial plywood.

Bottom frame with 4 Nos of legs shall be made of Ist class hard wood

TABLE CENTRE (FD-274/375)

Long rail

Short rail

Side stiffener

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Provn of wooden tringular bracket of size 75mm x 75mm made out of 40mm thick hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

TABLE 900mm x 900mm (FD-291)

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Provn of wooden tringular bracket of size 75mm x 75mm made out of 35mm thick hard wood and shall be fixed as directed by Engineer-in-Charge

PVC Shoe as per sample approved

TABLE DRESSING GENTS(FD-230/379)

Looking glass complete with frame and back ply.

Hat Stand with Mirror (FD-FD-233/361/FD-362)

5mm thick Mirror of size 300mmx440mm.

4mm thick commercial plywood for back

Aluminium Pegs with screw as per sample approved.

SOFA SET (FD-281/373)

Foam cushion for sofa set size 525x525x100mm, 40 density, Make-Sleepwell duly covered with best quality tapestry cloth as approved by Engineer-in-Charge complete all as directed and specified Note:- Rate of tapestry cloth shall not be less than Rs 250/- per RM

Table Bedside (FD/E-6/MAP/15 (R))

Top made of 18mm thick prelaminated particle board

Side 18mm thick prelaminated particle board

Back ply of 6mm thick commercial plywood of existing shape & size

Drawers as specified

Chromium plated Handle 100mm long

Telescopic channel of good quality.

TABLE DRESSING LADIES INCL STOOL(MAP) (FD/MAP-II/07)

5mm thick Mirror of size as per drawing with Back ply of 6mm thick commercial plywood

Sliding glass shutter of 3mm thick as per existing size.

Drawer of 6 mm thick ply wood commercial with 18mm pre-laminated MDF board as per existing shape and size with telescopic channel

Foam cushion 75mm, 40 density covered with fabric on seat to be fixed on 12mm thick ply on stool as per existing shape and size

Wheel at the bottom of stool as per existing shape and size

RE-CANNING OF CHAIRS : Re-canning of wooden chairs as per Godrej pattern with 2 mm wide half round superior quality cane plastic after taking out existing cane. Border of canning shall be woven with 4 mm half round plastic cane of superior quality as shown in drawing and directed by Engineer-in-charge.

Polishing of Wooden Furniture Items : All wooden surfaces of the following wooden furniture items wheather exposed to view or not when placed in position shall be polished with high gloss french polish to be finished as directed by Engineer-in-Charge duly preparation of surface with emery paper and applying putty as and where required.

Bed Plytop wooden - FD 246

Chair Dining FD-228/270/279

Chair Writing FD/261/280

Chair dining officer's FD/E6/MAP/10 (R) & FD/E6/MAP/10

Chair Easy FD-229

Teapoy (FD-278/382)

Peg Table (FD-236/277/384)

Table Writing (FD-275)

Table 900x600mm with drawer/without drawer

Table Dining 6 presons (FD-239/273)

Side Board (FD-241/371)

Table Centre FD-274/375)

Table 900 x 900mm FD-291

Hat Stand with Mirror (FD-FD-233/361/FD-362)

Sofa Single Seater

Sofa Set 2 Seater (FD-281/373)

Sofa Set 3 Seater (FD-281/373)

Sofa Set 4 Seater (FD-281/373)

Sofa Set 5 Seater (FD-281/373/FD/MAP-II/02)

Chair dining for (JCO's/OR's) FD/MAP-II/05

STEEL FURNITURE : Taking down worned out components of the following steel furniture, S&F new component as per shape and size specified on respective drawings and as directed by Engineer-in-charge

ALMIRAH LARGE STEEL WITH SHELVES (FD-351/1031)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side after preparation surfaces

Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Six Levers lock Make : Godrej/Harrison/Link with duplicate keys

Three way Locking Device of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer

Chromium plated Steel Handle 125mm

Chromium plated MS Key plate fixed with screw and nuts

Leg made of 1.6 mm thick MS sheet with Gas welding incl a coat of red oxide primer

Almirah Small/ Medium steel (FD-350 /1032/243)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Six Levers lock Make : Godrej/Harrison/Link with duplicate keys

Three way Locking Device of 10 mm dia MS rod as per trade pattern incl a coat of red oxide primer

Chromium plated Steel Handle 125mm

Chromium plated MS Key plate fixed with screw and nuts

Leg made of 1.0 mm thick MS sheet with Gas welding incl a coat of red oxide primer

Locker Bedside Steel ( FD-257/1029)

Shutter (Single Leaf) made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Back made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Side made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Bottom made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

Shelves made of 1.0 mm thick MS sheet applied with a coat of red oxide primer on both side

125mm Steel Handle 'D' type for Locker Bedside steel

Leg made of 1.0 mm thick MS sheet with Gas welding incl a coat of red oxide primer

75mm haps & stapple fixed with rivets of locker steel

Hanging Rod of 1.6mm thick chromium plated MS Rod

TABLE DINING OR's ( FD-165(M) )

Top of 18/19 mm thick MDF board of size 1900 mm x 685 mm covered with aluminium sheet 22 guage on top complete all as specified and fixed with frame with machine screws, as directed by Engineer-in-Charge

Rubber shoe to legs

CHAIR CB STEEL WITH ARMS/WITHOUT ARMS ( FD-75(M)

Seat frame of Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality as shown in drawing

All as per item No 28.01 here-in-before but back frame

Arms rest for Chair CB Steel with Arms of 1st class hard wood duly polished with high class black polish

PVC cap at top of the frame of the chair (02 Nos to each chair).

PVC Shoe at bottom of the frame of the Chairs (04 Nos to each chair).

TABLE OFFICE CLERK/TYPIST STEEL (FD-84(M)/1004/FD-1006)

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Drawer made of 22 gauge MS sheet with a coat of red oxide primer

Six levers Lock of Godrej/Harrison with duplicate keys.

PVC Shoe at bottom of the leg of the Table

TABLE OFFICE OFFICER STEEL (FD-84(M)/1003)

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Drawer made of 22 gauge MS sheet with a coat of red oxide primer

Six levers Lock of Godrej/Harrison with duplicate keys.

PVC Shoe at bottom of the leg of the Table

TABLE 3' x 2' STEEL WITH DRAWER ( FD-283/1008)/Table for Hav & OR Steel (FD-223/1007)

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

Drawer made of 22 gauge MS sheet with a coat of red oxide primer

PVC Shoe at bottom of the leg of the Table

TABLE 3' x 3' STEEL (FD-291/1009)

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe at bottom of the leg of the Table

Charpoy GI Pipe with Plytop: (FD-220)

3 way Galvanized Iron Elbow 32 mm dia. Note weight of each elbow shall not be less than 450 grams

Galvanized iron check nut 32 mm dia. Note :- weight of each check nut shall not be less than 125 grams

Long rail of 32 mm dia galvanized iron pipe medium grade incl threading at both ends as directed

Short rail converted out of retrieved Long rail, Item No 33.03 above incl cutting, threading as required and directed

Leg converted out of retrieved Short rail, Item No 33.04 above incl cutting, threading as required and and directed

Provn of Two Nos MS cleat as shown on drg to hold the MNF set and one MS plate at the bottom to each Leg converted out of retrieved Short rail

12mm thick ply wood top BWR Grade ISI Marked of size 1980mm x 900mm (Single piece).

Teapoy Verandah

Top made of 18/19mm thick both side prelaminated MDF board with PVC edge band tape/wooden beading to edges of the top as directed by Engineer-in-charge

PVC Shoe at bottom of the leg

FOAM WITHOUT BACK (FD-77(M)

Wooden plank for seat of size 1525MM x 255mm x 25mm made out of 1st class hard wood including applying two coats of french polish complete and fixed to steel /iron frame with suitable GI nuts complete all as specified and directed by Engr -in charge.

CHAIR WRITING MAP (FD/E6/MAP/12)

Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, as directed

Hand rest one piece made of black integral skin,reinforced with MS insert it.

CHAIR SCHOOL WITH HAND BOARD (FD/E6/MAP/05)

Hand board of 18 mm pre-laminated MDF board exterior grade with 2mm PVC edging & screwed at right hand side of chair arm fixed to frame as shown on drawing.

Seat & back in one piece made of PVC and fixed with frame

PVC shoe at bottom of the leg

BED HARD STEEL( FD/E6/MAP/08(R))

12mm thick ply wood top of size 1950mm x 900mm (Single piece) BWR Grade ISI Mark with MS screws, complete all as specified

18mm thick prelaminated particle board at head side of the bed as specified

18mm thick prelaminated particle board at foot side of the bed as specified

PVC shoes at the bottom of leg.

CHAIR COMPUTER (FD/E6/MAP/01)

Replacement of complete seat and back with new moulded foam cushioned 40mm density as shape and size, covered with tapestry cloth as approved along with PVC liping all round, as directed

Hand rest one piece made of black integral skin,reinforced with MS insert it. Hand rest have slope towards front as specified

Pedestal assembly complete

Twin wheel coasters press fitted at the bottom of leg.

Hydraulic system

TABLE COMPUTER (FD/E6/MAP/03)

Top of 18mm thick pre-laminated MDF board incl PVC lipping all around the top

Drawer of 18 mm thick pre-laminated MDF board fixed with telescopic channel

Keyboard tray of 18 mm thick pre-laminated MDF board fixed with telescopic channel .

PVC shoes at the bottom of leg.

CHAIR WITH HAND REST (FD-120(M)

Seat frame 1st class hard wood duly polished with high gloss finish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality as shown in drawing

Back frame 1st class hard wood duly polished with high gloss finish incl weaving with 2 mm wide half round plastic cane with Godrej pattern & border with 3 mm wide plastic cane superior quality as shown in drawing

Arm rest of 19mm prelaminated MDF Board with piano hinges

Chair Verandah (FD-256, 259, 359)

Taking out old U/S cane/newar and rubber shoes from chair verandah, removing of foreign materials from the iron frame by rubbing with sand paper, painting two coats with white synthetic enamel paint and recanning seat and back with 4 mm wide half round white plastic cane of superior quality as directed by Engineer-in-Charge

PVC/Rubber shoes as per sample approved

Double Bunk Charpoy (FD-263)

12mm thick plywood in one piece fixing with nut and bolts

Welding to frame and prepparation of surface

Cutting down wornout portion of MS Tube of the steel frame of Tables and replace with 25mm/32mm dia 1.6mm wall thickness MS tube in one piece to bring into original size as per drawing duly welding , applying of red oxide primer after preparation of surface. Upto 300mm long piece will be counted as one.

Painting of the following furniture items with two coat of synthetic enamel paint (colour as approved by Engineer-in-Charge) after preparation of surfaces :-

Almirah Steel Large with Shelves, FD-351/1031

Almirah Small/medium steel (FD-350 /1032/243)

Locker Bedside Steel ( FD-257/1029)

Table Dining OR (FD-165(M)

Chair CB steel with arms ( FD-75(M) )

Table office ckerk steel (FD-84(M)/1004)

Table for Hav & OR Steel (FD-223/1007)

Table (900x600x760)mm steel with drawer (FD-283/1008

Table 3'x3' steel (FD-291/1009)

Table officer officer steel (FD-84(M)/FD-1003)

Book Shelf open steel Small (FD-69(M)

Charpoy IP with plytop (FD/MAP-II/01)

Almirah Steel Large 1/2 H 1/2 SH (MAP)

Chair writing MAP(FD/E6/MAP/12

Chair School with hard board FD/E6/MAP/05

Bed Hard FD/E6/MAP/08®

Rack six tier steel (FD-1038)

Teapoy Verandah (FD-255)

Book Case Steel

Form without back

Deduct Schedule of Credit of Rs. (-) 53651.50 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

R C TRADERS

PACHNANDA BUILDERS

VEE KAY IND