Work of making of power distribution board, switch board and wiring work etc at different locations under GM Unit, Dhori Area

Amount

Part A: Power distribution board and wiring at D1 & D3

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Nut, bolts with washer 1/2" X 3 "

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and re-filling the trench etc as required: upto 35 sqmm

Supply and fixing of DB 200 A

Supply and fixing of 100 A changer

Supplying installation, testing and commissioning of following capacity TPN tap off box made of 1.6 mm thick sheet steel enclosure duly painted with powder coating on existing rising main complete with TPN disconnector FSU and HRC fuses, connections, earthing etc as required: 100 Amps TPN

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : 2 X 6 sqmm + 1 X 6 sqmm earth wire

Supplying & fixing wooden board (Size: 6' X 2')

Part B: Switch board, power distribution board at GM colony, HMS room, GM office, CHD colony

Providing & fixing Angle 50 x 50 x 6 mm

Erection & fabrication of M.S. angle

Supply and fixing of nut, bolt with washer ½” x 3”

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and re-filling the trench etc. as required. : upto 35 sqmm

Supplying, installing, testing and commissioning of following capacity end feed unit made of 1.6 mm thick sheet steel enclosure duly painted with powder coating to existing rising mains complete with TPN disconnector FSU and HRC fuses, mounting stands, cable end box, brass compression gland, connections, earthing etc as required 300 amps TPN

Supply & fixing copper lugs 150 Amp

Supply & fixing 63 Amp. Timer switch

Supply & fixing of wooden board 15’ x 4’

Making and fixing of MS clamp for fixing of timer switch

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2x 6sqmm + 1x6sqmm earthwire

Part C: Wiring of quarters no. C - 6 and quarters of Dr. Abhimanyu Saket, Dr. B. Satish Kumar and Auditor house

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required: Group B (a) Bulb point (b) Tube point (c) Fan point (d) Call bell point

Supplying and fixing metal box of 150 mm x 75 mm x 60 mm deep (nominal size) on surface in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 3 pin 5/6 amps socket outlet and 5/6 amps piano type switch, connection, painting etc. as required. (For light plugs to be used in non residential buildings).

Supplying and fixing metal box of 180 mm x 100 mm x 60 mm deep (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including providing and fixing 6 pin 5/6 & 15/16 amps socket outlet and 15/16 amps piano type switch, connection, painting etc. as required.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, ‘’C’’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole & neutral.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/isolator). : 2 + 4 way/ 6 way, double door.

Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required : 2 x 4 sq.mm + 1 x 4 sq.mm earth wire.

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 4 x 2.5 sq.mm

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required. 32 Amp TP&N.

Earthing with G.I. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long with charcoal/ coke and salt as required.

Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate as required.

Supply and fixing of LED bulb 12 watt.

Supply and fixing of LED tube light 18 watt.

Supplying and drawing following sizes FRLS PVC insulated copper conductor, single core cable in existing surface/ recessed steel/ PVC conduit as required. : 4 x 4 sq.mm

Supplying and fixing brass batten/ angle holder including connection etc. as required.

Supplying and fixing 3 pin, 5 amps ceiling rose on the existing junction box/ wooden block including connection etc. as required.

Providing and fixing 50mm dia x 3.2 metres G.I. pipe (including accessories) complete with 50mm x 50mm x 6mm angle iron bracket on wall and 75mm x 90mm shackle insulator with straps for house service connection including painting the angle and flat iron with primer and finish paint etc. as required

Supplying and fixing 20 amps, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top along with 20 amps ‘’C’’ curve, SP, MCB, in sheet enclosure, on surface or in recess, with chained metal cover for socket out let and complete with connections, testing and commissioning etc. as required.

Total impact of GST for the purpose of CTC

M/s Arvind Kumar Singh

M/s Saloni Sales