Repairing and rectification and allied works at Dihibatpur w s scheme P H No I Block Pursura Dist Hooghly under Electrical Division PHE Dte

Amount

Labour charges for dismantling the main switch, starter, changeover, busbar cum panel box, MS angel frame, stabilizer, chlorine machine, 220 volt & 440 volt wiring, internal & outside lighting set, other usable accessories from damaged pump house and manual carrying to PHE civil room by engaging skilled and unskilled labour as per direction of EIC.

Outgoing:- For 15HP-25 HP Starter: - a) Motor Protection Circuit Breaker(30-42Amp) (Make - ABB) - 1 no. b) Motor Protection Relay (0.5-80 Amp) a Over Current,Under Current,Phase Loss,Phase Imbalance,Phase Reversal and Locked Rotor Protection (Make - EOCR-Schneider) - 1 no. c) Power Contactor,AC-3Duty,40Amp,230V,AC(Make-ABB/L&T)-2nos., d) Power Contactor,AC-3Duty,32Amp,230V,AC(Make-ABB/L&T)-1no., e) Star-Delta Timer, (Make - Siemens/ ABB/GIC/Minilac) - 1 no. f) Capacitor (8.3/10KVAR), (Make - Epcos) - 1 no. g) TP MCB for Capacitor (20Amp), (Make - ABB/L&T) - 1 no. h) Contactor (18 Amp) for Capacitor, (Make - ABB / Siemens) - 1 no. i) On delay timer, (Make - Siemens/ ABB/GIC/Minilac) - 1 no. j) SP MCB (6 Amp) for control, (Make - ABB/Siemens) - 1 no. k) Indicator (R/Y/G), (Make - ABB/Siemens/Sumo) - 3 nos. l) Push Switch (R/G), (Make - ABB/Siemens) - 2 nos.

For Chlorine:- a) TP MCB (16 Amp), (Make - ABB/L&T). - 1 no. b) Contactor (9 Amp), (Make - ABB/L&T) - 1 no. c) Over Load Relay (1.3-1.8 Amp), (Make - ABB / Siemens) - 1 no. d) Push Switch (R/G), (Make - ABB/Siemens) - 2 nos. e) Indicator (R/Y/G), (Make - ABB/Siemens/Sumo) - 3 nos. f)Over Load Relay Mounting Kit(Make-ABB/L&T)-1no g) Water Level Controller, (Make - GIC) - 1 no.

For Yard Light:- a) TP MCB (16 Amp), (Make - ABB/Siemens). - 1 no. b) Contactor (17 Amp), (Make - ABB/Siemens) - 1 no. c) Toggle Switch, (Make - Kaycee) - 1 no.

Supply & delivery of 35 sq. mm. 3 1/2 core PVC insulated Al. armoured cable (1.1 KV grade), IS 1554 (Part - I) / IS 7098 (Part-I) (Make : INCAB / Gloster / NICCO / Polycab / Crystal)

Supply & delivery of 100 amp. 440 V, 50 Hz. TPN Main switch with rewireable type fuse link (Make: Havells / Standard)

Installation of pumping machinery with valves, pipe & pipe specials, sort piece, presurre gauge including hoisting of column pipe making all electrical and water line interconnection complete as per direction including supply of necessary materials as required for the work.

Installation of panel and interconnetion with electrical equipments (say Main switch, submersible cable etc.) by supplying necessary materials as per requirement including masonry works and mending good damages and testing commissioning all complete asper direction of EIC.

Installation of Existing chlorinator pump set and drawing of power line by supplying of necessary wire and continuous earthing connected to auto/ manual panel. This includes the cost of making necessary brick foundation base with neat cement finish by supplying all requered materials and testing entire set as per direction of EIC

Making internal electrification with 16Amp main switch/MCB (Make: Havells/ Any approved) by 1.5 sq.mm FRLSH grade copper PVC insulated single core multistrand wire (Make: Havells/ Mescab/ Finolex/ Any approved) in PVC casing of pump house consisting of 2 nos. bracket point, 1 no. tube light point, 1 no. bulk head point and 1 no. five pin 5 amp. socket point, 1 no. ceiling fan point with controlling switches including supply of 2 nos. bracket with 12W LED lamp, 1 no. 20 watt LED tube light set, 1 no. outdoor type bulk head with 9W LED lamp and drawing of necessary earthing (1.0 sq.mm) material all complete as per direction EIC. (LED light Make: Philips/ Havells/ Any approved)

Supply and fitting fixing of 40 watt. x 2 nos. LED light set [Make - Philips, Model: BRP409 LED 040 CW HO MR FG S1 PSU GR] with 2 nos 40 mm dia 2.5 mtr. long G.I pipe bracket fixed on the roof of the pump house with properly grout including making power connection by 2 x 1.5 sq. mm copper FR grade flexible wire through PVC casing/conduit with drawing earth conductor (1.0 sq mm copper flexible wire), fitting fixing of 15 amp switch on board with all complete as per direction of EIC.

Earthing confirming to IS: 3043 by 50mm dia GI pipe 3.64mm thick x 3.04m long and 1 x 4 SWG GI (Hot Dip) wire (4 mts. Long), 13mm dia x 80mm long GI bolts, double nuts, double washers including supply & fixing of 15mm dia GI pipe protection (1 mtr long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 mtrs below the ground level and restoring surface duly rammed as below. a) For Soft Soil By TATA - Medium GI pipe

Drawing earth by M.S. Flat strip (20mm x 3mm) from earth bus / electrode to above different components as per I.E. Rules and as per direction of EIC.

Supply, delivery & fitting fixing of 48'' sweep 230 volt, 50 Hz, AC ceiling fan (Make : Havells/ CG/ Approved make) including fitting fixing on ceiling and making electrical connection complete.

Supply & delivery at site 2 nos. Plastic Chair & 1 no. Plastic Table (Make: Cello / Supreme / Nilkamal)

Add: 18% GST

Add: 1% CESS

DEY ENTERPRISE (BID ID -5716264)

EASTERN INDIA SALES AND SERVICE (BID ID -5717048)