REPAIR TO CERTAIN WOODEN FUNITURE AND SOFA SET AT AEC TRG COLLEGE AND CENTRE PACHMARHI

Amount

DRG NO-FD-242 : STOOL DRESSING LADIES: Supply & fixing in replacement of Seat made of 75 mm thick , 40 density foam with fabricated leathorised Rexine on 12 mm thick commercial ply wood as per existing , of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD-242 : STOOL DRESSING LADIES: Supply & fixing in replacement of fabricated leathorised Rexine on seat of stool dressing as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD-242 : STOOL DRESSING LADIES: Supply & fixing in replacement of legs 380 mm long of size 50 mm x 30 mm of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish Make - Asian/Burger including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD-242 : STOOL DRESSING LADIES: Supply & fixing in replacement of side rail of size 300 x 65 x 25mm of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish Make - Asian/Burger including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD/E6 /MAP/14: STOOL DRESSING LADIES: Supply & fixing in replacement of stiffener of existing size and shape of Ist class hard wood MP teak including polishing with Hi-gloss French polish Make - Asian/Burger including preparation of surface to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD-242 : STOOL DRESSING LADIES: M&L French Polishing Make - Asian/Burger Stool Dressing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD-26 & 241: SIDE BOARD: Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply/Century/Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-26 & 241: SIDE BOARD: Supply and fixing in replacement drawer made out of 12 mm thick teak wood plank and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-26 & 241: SIDE BOARD: Supply and fixing in replacement shutter made out of 18 mm thick prelaminated particle board (Make - Green Ply/Century Ply/Action Tesa) as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- charge.

DRG NO-FD-26 & 241: SIDE BOARD: Supply and fixing in replacement of back made out of 6 mm thick ply at back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-26 & 241: SIDE BOARD: M&L French Polishing with Hi-gloss French polish (Make - Asian/Burger) of any description width of girth including preparation of surface for polish complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD-248, 276, 210: TABLE BED SIDE: Supply & fixing in replacement sides of 18 mm thick pre-laminated particle board Make - Green Ply/Century Ply/Action Tesa of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD-248, 276, 210: TABLE BED SIDE: Supply & fixing in replacement top of 18 mm thick pre-laminated particle board Make - Green Ply/Century Ply/Action Tesa of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD-248, 276, 210: TABLE BED SIDE: Supply & fixing in replacement of centre and bottom shelf made out of 12 mm thick pre-laminated particle board (Make - Green Ply / Century Ply) of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD-248, 276, 210: TABLE BED SIDE: Supply & fixing in replacement of back made out of 6 mm thick commercial ply wood of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD-248, 276, 210: TABLE BED SIDE: M&L French Polishing Table Bed side of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-CEJZ/SKD/337: TABLE BED SIDE SPL: Supply and fixing in replacement Back sheet Size 680mm x 400mm of 6mm thick BWR Ply of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-CEJZ/SKD/337: TABLE BED SIDE SPL: Supply and fixing in replacement of drawer size 400mm x 360mm the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board (Make - Green Ply / Century Ply) of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by engineer-in- Charge.

DRG NO-CEJZ/SKD/337: TABLE BED SIDE SPL: Supply & fixing in replacement of bottom rail size 300mm x 50mm x 25mm thick of existing size and shape Ist class hard wood MP teak including polishing to match with the existing complete all as specified, shown on drawing ad as and as directed by Engineer-in- Charge.

DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply / Century Ply/ Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement of drawer size 720mm x 380mm the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board Make - Green Ply/Century Ply/Action Tesa of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by engineer-in- Charge.

DRG NO-CEJZ/SKD/343: TABLE DINING (930 x 930 x 790 MM): Supply and fixing in replacement of drawer size 350mm x 380mm the bottom of drawer shall be 6mm BWR commercial ply and sides and back of drawer 18 mm particle board Make - Green Ply/Century Ply/Action Tesa of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by engineer-in- Charge.

DRG NO-FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply/Century Ply/Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: Supply and fixing in replacement drawer made out of 12 mm thick teak wood plank and 6mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: Supply and fixing in replacement 5 mm thick looking mirror (Make - Modi Guard/ Saint Gobin) as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 251 & 378: TABLE DRESSING LADIES WITH MIRROR: M&L French Polishing with Hi-gloss French polish Make - Asian/ Burger of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engineer-in-Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply/ Century Ply / Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of side stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement of centre stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement drawer made out of 12 mm thick teak wood plank and 6 mm thick ply at bottom and back as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement shutter made out of 18 mm thick prelaminated particle board Make - Green Ply/Century Ply/Action Tesa as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: Supply and fixing in replacement side and back ply made out of 6 mm thick ply as per existing size and pattern complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD - 33, 249, 275: TABLE WRITING: M&L French Polishing to Table writing of any description width of girth including cleaning and preparing the surface for the articles of table writing complete all as specified, shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of rear and front legs of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of front rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of rear rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of top rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD- 201 & 229: CHAIR EASY: Supply & fixing in replacement of arm rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD- 201 & 229: CHAIR EASY: M&L French Polishing make - Asian / Burger to Chair Easy of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply/ Century Ply/ Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in charge.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: Supply and fixing in replacement of front/ side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in-Charge.

DRG NO-FD-34, 232, 278, 382 & DB-3974: TEAPOY: M&L French Polishing to teapoy of any description width of girth including cleaning and preparing the surface for the articles of teapoy complete all as specified, and shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of front legs of existing size and shape / pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of rear legs of existing size and shape/ pattern as shown on drawing of Ist class hard wood MP teak including polishing to match with the existing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of side/front/rear rail of existing size and shape Ist class hard wood MP teak including polishing to match with the existing complete all as specified, shown on drawing ad as and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of back vertical strips as per existing size & shape of Ist class teak wood MP teak including polishing to match with the existing complete all as specified, as shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of stiffener of existing size and shape of Ist class hard wood MP teak including polishing to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of back rest of of existing size and shape of Ist class hard wood MP teak including polishing to match with the existing complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of Seat made of 75 mm thick, 32 density foam with fabricated leathorised rexine on 12 mm thick commercial ply as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: Supply & fixing in replacement of fabricated leathorised rexine on seat of chair dinning as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/10: CHAIR DINING: M & L Wooden portion shall be smoothened to apply best quality water base French polish glossy finish ( Make- Asian / Burger Paints) including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of top 18mm thick pre-laminated particle board (Make - Green Ply / Century Ply / Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all sround including polishing to match the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in-Charge.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer- in- Charge.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of front/rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: Supply and fixing in replacement of stiffener made out of Ist class hard wood MP teak of existing size and shape including polishing of surface to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 29, 274, 235, 375: TABLE CENTRE: M&L French Polishing make - Asian / Burger to Table Centre of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD- 25, 236 & 384: PEG TABLE: Supply and fixing in replacement top of 18mm thick pre-laminated particle board (Make - Green Ply / Century Ply/ Action Tesa) of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all around including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 25, 236 & 384: PEG TABLE: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 25, 236 & 384: PEG TABLE: Supply and fixing in replacement of front/ side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 25, 236 & 384: PEG TABLE: M&L French Polishing to peg Table of any description width of girth including cleaning and preparation of the surface for the articles of peg table complete all as specified and directed and shown on drawing.

DRG NO-FD – 250, FD-280: CHAIR WRITING: Supply & fixing in replacement of front legs of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD – 250, FD-280: CHAIR WRITING: Supply & fixing in replacement of rear legs of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD – 250, FD-280: CHAIR WRITING: Supply & fixing in replacement of side /front /rear rail of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD – 250, FD-280: CHAIR WRITING: Supply & fixing in replacement of arm rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD – 250, FD-280: CHAIR WRITING: Supply & fixing in replacement of stiffener of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD – 250, FD-280: CHAIR WRITING: Supply & fixing in replacement of back rest of Ist class hard wood MP teak including polishing to match with the existing, of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD – 250, FD-280: CHAIR WRITING: M&L French Polishing to Chair Writing of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of 5 mm thick looking mirror (Make - Modi Guard/ Saint Gobin) Size 1200 x 600mm as per existing size and shape including fitting with the teak wood frame & polish to frame with High glossy French polish (Make - Asian/ Burger) and complete all as specified, as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of back made of 6 mm thick commercial ply Size 1200 x 600mm as per existing size and shape complete as specified, all as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: S & F in replacement of plain glass shelf of size: 565 x100 x 5mm thick duly grinded smoothly to edges as per existing size and shape as shown on drawing complete all as specified, as shown in drawing and as directed by Engineer -in- Charge.

DRG NO-FD/E6/ MAP/16: TABLE DRESSING GENTS WITH MIRROR: M & L French Polishing Table Dressing gents with mirror of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of 12 mm thick commercial plywood type AA ( ISI -303 Marked Make - Century Plywood of existing size and shape complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of long rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of head rest ply of 4mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of foot rest ply of 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of stiffener made out of Ist class hard wood MP teak including polishing to match with existing size and shape complete all as specified, shown on drawing and as directed.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of head rest made out of Ist class hard wood MP teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: Supply and fixing in replacement of foot rest made out of Ist class hard wood MP teak frame with 4 mm thick plywood of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD – 246, 247: BED HARD PLY WOOD TOP: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparing of the surface for polish complete all as specified, as shown on drawing and as directed by Engineer-In-Charge.

DRG NO-FD & DB: RECLEANING OF CHAIRS: Taking down old cane from the all type of chairs and re-canning with 2 to 2.5 mm wide half round new plastic cane in Godrej pattern with 3 strands in two in central holes both way (in place of two in other holes using minimum weight of cane mentioned below and complete all as per drawing and as directed :- (a) Chairs dining/Chair Writing /Chair CBB/ Chair CBA 75 to 100 Gram. (b) All type of Chair Easy (c) Stool Dressing

DRG NO-CEJZ/SKD/334: BOOK RACK: Supply and fixing in replacement of 6mm thick Open able Glass Shutter size 305mm x 56mm with Steel Hinges and Magnetic Catcher existing size and shape complete all as specified, as shown in drawing and as directed by Engr-in- Charge.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply and fixing in replacement of top 18mm thick pre-laminated particle board Make - Century Ply / Green Ply / Action Tesa of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: Supply & fixing in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in Charge.

DRG NO-FD- 55, 231, 284: TABLE 3'x2' WITHOUT DRAWER: M&L French Polishing to Table of any description width of girth including cleaning and preparation of the surface complete all as specified, shown on drawing and as directed by Engineer-In-Charge

DRG NO-FD -291: TABLE 900 x 900 x 760 MM: Supply and fixing in replacement top of 18mm thick pre-laminated particle board Make - Century Ply / Green Ply / Action Tesa of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed.

DRG NO-FD -291: TABLE 900 x 900 x 760 MM: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD -291: TABLE 900 x 900 x 760 MM: Supply & fixing in replacement of top side rail of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD -291: TABLE 900 x 900 x 760 MM: M&L French Polishing with Hi-gloss French polish of any description width of girth including preparation of surface for polish complete all as specified, as shown on drawing and as directed by Engineer-In-Charge

DRG NO-FD/E6/MAP/15 (R): TABLE BED SIDE: Supply & fixing in replacement sides of 18 mm thick pre-laminated particle board Make - Century Ply / Green Ply / Action Tesa as per existing size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/15 (R): TABLE BED SIDE: Supply & fixing in replacement top of 18mm thick pre-laminated particle board Make - Century Ply / Green Ply / Action Tesa existing size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/15 (R): TABLE BED SIDE: Supply and fixing in replacement of drawer made out of 12mm thick pre-laminated particle board Make - Century Ply/Green Ply of size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/15 (R): TABLE BED SIDE: Supply and fixing in replacement of back made out of 6mm thick commercial ply wood existing size and shape as shown on drawing complete all as specified and as directed by Engineer-in- Charge.

DRG NO-FD/E6/MAP/15 (R): TABLE BED SIDE: Taking Out old U/S rubber Shoes from table bed side and Supply and fixing with new PVC shoes for table bed side complete all as shown in drawing and as directed by Engineer-in- Charge.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement top of 18mm thick pre-laminated particle board Make - Century Ply / Green Ply/Action Tesa of size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by engineer-in- Charge.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: Supply and fixing in replacement of front / rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD -30, 239 & 273: TABLE DINING 6 PERSONS: M&L Polishing with Hi-gloss French polish Make – Asian/ Burger of any description width of girth including preparation of surface complete all as specified, as shown on drawing and directed by Engineer-In-Charge.

DRG NO-FD-273, 376: TABLE DINING 8 PERSONS: Supply and fixing in replacement top of 18mm thick pre-laminated particle board Make - Century Ply / Green Ply/Action Tesa of exterior grade melamine base grade -I type -II ISI Certification Mark IS- 3087 / 2823 size as shown on drawing, one side with shade as approved and balancing white with 4 mm teak wood edging all round including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-273, 376: TABLE DINING 8 PERSONS: Supply and fixing in replacement of leg made out of Ist class hard wood MP teak of existing size and shape including polishing with to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-273, 376: TABLE DINING 8 PERSONS: Supply and fixing in replacement of side rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-273, 376: TABLE DINING 8 PERSONS: Supply and fixing in replacement of front/rear rail made out of Ist class hard wood MP teak of existing size and shape including polishing to match with the existing complete all as specified, shown on drawing and as directed by Engineer-in- Charge.

DRG NO-FD-273, 376: TABLE DINING 8 PERSONS: M&L French Polishing Make – Asian/ Burger to Table dinning 8 Pers of any description width of girth including cleaning and preparation of the surface complete all as specified, as shown on drawing and as directed by Engineer-in-Charge.

DRG NO-FD-281 SOFA SET( one three seater and 2 single seater): Removing existing U/S Tapestry cloth coir, cotton. Hessian cloth, long cloth, coton thread , springs and S and F new seat and vback of 12 mmthick commercial plywood of adequate size on existing surface and 100mm thick cushion foam 32 density (Make Sleep well, Harmony) is to be fised/Paste properly on the seat and 75 mm thick cushion foam 32 density (Make: Sleepwell , Harmony ) on the back, 25 mm thick foam is to be fixed/pase on the Arms. All sofa excluding legs is to be covered with tapesty cloth not less than Rs 250/- per RM . All work ie. Fixing of Plywood, Cushion and stictiching of tapesty cloth etc should be in good workmanship to maintain good looking shape and size complete all as specified and shown on drg.

DRG NO-FD-281: SOFA SET (1 three seater & 2 single seater) All as per item No-1 above but sofa chair without arms

DRG NO-FD-281: SOFA SET (1 three seater & 2 single seater) Removing of old unserviceabel Legs and S and F new Leg of 1st class teak wood to sofa set complete all as specified and shown on drg

DRG NO-FD-281: SOFA SET (1 three seater & 2 single seater) Removing existing unserviceable cushion from sofa set 3 piece 5 seated and supply of new cushion 32 density of make-Sleepwell/Hormony/National of size 530x560x100 mm thick covered with markine cloth duly stiched on all side of cushion, stiched cushion with markine cloth is to be covered with tapestry cloth of best quality of not less than Rs 200/- RM as approved and direcgted by Engr in Charge

Budget Furniture Industries

Bidder Name

NIHAL ENTERPRISES

Budget Furniture Industries