REPAIR REPLACEMENT OF INTERNAL WIRING COMPLETE WITH ALL ACCESSORIES OF 15 FAD JINDRAH UNDER GE ARMY DHAR ROAD

Amount

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc. all as specified and directed.

Taking down MCB DB of any size and disposal under schedule of credit and making good disturbed surfaces all as specified and directed.

Taking down old unserviceable LED tube light fittings/Post top light fittings/ security light fittings any type/ any wattage and removal from site and making good disturbed surfaces of walls, ceiling etc complete all as specified and directed by Engineer-in-Charge to match with existing surface all as directed.

- Ditto - all as per item No - 4 above but controlled by two way switch.

- Ditto - all as per item No - 4 above but one call point controlled by one bell push switch.

- Ditto - all as per item No - 4 above but for one 3 pin 5 Amp socket on same board all as directed.

- Ditto - all as per item No - 4 above but for one 3 pin 5 amp socket on indipendant board all as directed.

- Ditto - as per item No: 4 here in before but with 2.5 sqmm copper conductor for 15 amp socket with 1.5 sqmm earth continuity conductor.

Taking out /dismantling unsv Sub main wiring and S & F Sub main wiring with PVC insulated, FRLS cable 2 single core 6 Sq mm 1100 V grade with stranded copper conductor on and incl PVC rigid non metalic conduit (ISI marked) in concealed incl all specials like joint, elbow , Tee ,junction , bend etc and provision of PVC insulated copper conductor single core 4.0 sq mm for earth continuity conductor complete all as directed by Enginer-in-charge .

All as per item No 10 here in before but 2 run of 4 sqmm and one run of 2.50 Sqmm earth contuinity conductor

All as per Item No-10 above but 2 single core 1.5 Sq mm,one single core 1.0 sq mm for earth continuity conductor complete all as directed by Enginer-in-charge .

S & F of Modular snap switch SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular snap switch SP two way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular bell push switch, SP one way 5/6 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular socket 5 pin 5/6 Amps suitable for 2 Module complete all as specified and directed.

S & F of Modular snap switch SP one way 15/16 Amps suitable for 1 Module complete all as specified and directed.

S & F of Modular socket 5/6 pin 15/16 Amps suitable for 2 Module complete all as specified and directed.

S & F of Modular Fan step Regulator electronic, 120 watts, 2 Module complete all as specified and directed.

S&F of Modular blanking plate suitable for 1 Module complete all as specified and directed.

S & F of Modular white cover plate incl Modular base frame & powder coated Modular sheet metal concealed box for 8 module complete all as specified and directed.

All as per Item No-21 above but 6 module complete all as specified and directed.

All as per Item No-21 above but 3 module complete all as specified and directed.

All as per Item No-21 above but 2 module complete all as specified and directed.

S & F of ceiling rose surface backalite 65mm x 50 mm, two to three terminals complete all as specified and directed.

Supply and fixing of Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete all as specified and directed.

Supply and fixing Electric bell, AC,230 Volts single phase ding dong type complete all as specified and directed.

Supply and fixing Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed.

Supply and fixing Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 Amp flush type complete all as specified and directed.

Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and directed.

Supply and fixing Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed.

S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed.

Supply and fixing PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.

Ditto, but 175 x 100 x 50 mm deep

Ditto, but 200 x 150 x 50 mm deep

Ditto, but 250 x 200 x 50 mm deep

Ditto, but 350 x 300 x 50 mm deep

Supply and Fix MCB protected socket (Modular AC box) 4 module plasic box with 25A cap MCB SP complete all as directed and specified.

Supply and fixing of LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. complete all as specified and directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC,decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 8, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc flushed on the existing wall , to match with existing surface and making all necessary connections complete all as directed.

All as per item No: 43 here in before but SPN 04 way, 240 volts complete all as directed.

All as per item No: 43 here in before but SPN 12 way, 240 volts complete all as directed.

All as per item No: 43 here in before but TPN 04 way, 415 volts complete all as directed.

Supply and fixing of MCCB Incomer distribution board double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating surface mounting, TPN 4 way, 415 volts with bus bar rating 200 Amps, dust and vermin proof and IP 43 - IK 09 protection suitable for incorporation of MCCB complete all as specified and directed. Note : The cost of removing old MCCB box and making good of surface as original i.e. brick work, plastering, white washing etc is included in quated rate.

Supply and fixing of MCCB 3 Pole .415 V. fixed type, 100 Amps with breaking capacity 16 KA, including spreader terminals / thimble of suitable size and making connections incl taking out old one complete all as specified and directed.

S & F of isolator DP 63 amp 230 Volt complete all as specified and directed.

All as per item No: 49 here in before but isolator TPN 63 Amps, 415 volts complete all as directed.

S & F of isolator SP, 6-40 Amps, 230 Volts complete all as specified and directed.

Supply and fixing round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

Supply and fixing LED luminaire 600 mm x 600 mm,35/36 watt (Warm yellow/Warm white), 220 V AC Surface/recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 20W, 220V,(Warm yellow/Warm white) AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED flood light 70 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistantcomplete with driver and lamp complete including taking down old unsv fittings of any size / watt complete all as specified and directed.

Supply and fixing of Post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete incl necessary mounting pole of GI tubing light grade suitable dia of required length incl necessary form work , all fixing accessories,monkey menace protection using steel spikes & barbed wire etc and all electric connections and testing complete incl taking out unserviceable fittings all as specified and as directed.

Supply and fixing of decorative wall mounting Antique handmade cylinderical fixtures with frosted glass light fitting suitable for 1 x 12 watt retrofit(Warm yellow) type holder (base B-22) incl 01 Nos of LED bulb 12 watts(WArm yellow) with connector block, etc. complete with all accessories prewired and including connecting up with two core round flexible copper conductor cable in white with suitable size complete all as specified and directed.

Supply and fixing of decorative wall mounting chrome finish fixtures with frosted glass light fitting suitable for 1x 12watt retrofit type holder (base B-22) incl 01 Nos of LED bulb 12 watts(Yellow colour) with connector block, etc. complete with all accessories prewired and including connecting up with two core round flexible copper conductor cable in white with suitable size complete all as specified and directed.

Supply and fixing of polycarbonate integrated directly retrofit LED tube light T8,18/20 watt(base aluminium) colour cool day light 4 feet white,operating voltage:142-270 volts in existing FTL fitting of capacity 36/40 watts in repairs all as specified and directed.

Supply and fixing of 15 watts LED bulb retrofit type(B-22) suitable for decorative light fittings complete all as specified and directed.

Supply and fixing of 7 Watts LED bulb retrofit type(B-22) suitable for decorative light fittings complete all as specified and directed.

S&F of LED high bay light fitting out door type 80 watts pressure die cast aluminium housing,electronic driver unit and LED lamp with refector and IP 66 protection incl necessary mounting bolts, connecting up incl taking down old unsv fittings all as directed .

Supply and fixing of LED surface mounting light fitting 15 watts with lamp consisting of prewired high efficiency electronic driver high translucent frosted diffuser glare free smooth high distribution and connected up with white flexible 2 core cable incl taking down Unsv fitting complete all as specified and directed.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impactand cor rosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete including taking down old unsv fittings of any size / watt complete all as specified and directed.

Supply and fix in replacement of security light fitting bracket made up of 25/32 mm dia medium grade pipe of length 0.9 mtr with bending in shape by hot or cold method with 2 nos 50x4 mm MS flate clamps with nut bolts and washer etc all as directed

Supply and fixing of IP 65 protection LED bollard fitting 9 watts with electronic driver unit and lamp for landscape lighting having aluminium housing translucent diffuser tube polycorbonate, the colour of bollard is gray or silver and height of bollard 60 cm including mounting nut bolts PVC connecter incl monkey menace protection using steel spikes & barbed wire etc and taking down old unserviceable lights complete all as directed.

Material & Labour of MCCB 3 Pole .415 V. fixed type,125Amps with breaking capacity 16 KA and making connections of incoming and out going wires are properly fitted in suitable lugs/thimples including taking out old unserviceable MCCB complete all as specified and directed.

M&L in replacement of fabrication of sheet metal enclouser to accommodate 04 Nos electric meters of size 800 mm x 500 mm x 150 mm deep and 1.6 mm thick MS sheet, powder coated, bakelite sheet with side hung shutter including provision of locking arrangement and niche covered with 4 mm thick plain glass , including locking arrangement & open Wiring coverd with Flexible Pvc Pipe of suitable size complete all as specified and as directed.

Supply and fixing of On load Change over switch, 4 Pole,415 Volts,50 Hz,AC,200 Amps side handle operated conforms to IS 60947-1 & 3 incl making all incoming and out going wires are properly fitted through lugs/thimbles incl taking out old one complete all as specified and directed.

Supply and fixing of Switch disconnector fuze 200 Amps , 3 Pole & Neutral ,AC,415 Volts,50 Hz with Panel mounting cubical type in sheet steel Encl, with 3 No's HBC fuses incl making all incoming and out going wires are properly fitted through lugs/thimbles incl taking out old unsv one complete all as specified and directed.

Supply and fixing in replacement of 1100 volts grade heavy duty cable PVC insulated aluminiumconductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular of size 10 sqmm 2 core complete all as directed.

All as per item No 71 above but 06 sqmm 2 core omplete all as directed

Supply & fixing in replacement of Busbar chamber 200 Amps, TPN 8 way minimum length 460mm long enclosed in sheet metal enclosure with and including 04 No's of angle iron legs length 1.2 made out of 50mmx50mmx6 mm thick MS angle mounted on plateform suitable for operation on 3 phase,4 wire ,440volts, AC supply system including consisting of sufficient no's of circular cable entry holes at bottom only with suitable PVC/Rubber bushes to prevent water/moisture inside the enclosure ,required no's of holes to be fixed with chromium plated brass cable glands for cable entry and exit complete with necessary internal wiring with strandard copper conductor FRLS wires of adequate size,duly powder coated internally & externally of approved shade including all the fixing arrangements, making all incoming and out going connections through the lugs/thimbles all as specified and directed .Note: PCC item will be measured and paid separately.

M& L for Painting of ceiling fans/Exhaust fan complete, in situ with synthetic enamel paint by spraying including filling cavities with filler, one coat after cleaning all dust etc all as specified and directed.

Meterial and labour for cement concrete in foundations for pole or any other work type C2 1:3:6 with 40 mm gradedcrushed stone aggregate all as directed

Meterial and labour for cement concrete in foundations for pole coping or any other work type B1 1:2:4 with 20mm graded crushed stone aggregate all as directed

Meterial and labour for cement concrete in foundations for pole or any other work type D2 1:4:8 with 40 mm graded crushed stone aggregate all as directed.

M&L for Galvanised iron pipe light grade 40mm bore with fittings for fixing of LED Post top lantern light fitting 20 Watts(Gate light), excavation wherever required at site including taking down old unserviceable complete all as specified and directed.

M&L for Earthing complete with copper plate earth electrode of size 60 cm X 60 cm X 3.15 mm thick burried directly in ground earth pit not less than 2.25 mtr deep below ground level with top edge of the plate not less than 1.5 mtr below normal ground level connected to copper strip of 20mm X 3mm thick by means of brass or copper alloy nuts, bolts, check nut and washer including earthing pit made by PCC (1:3:6 )type C-1, RCC (1:2:4) type A-1 pre cast cover (54cm X 54cm x 5 cm) duly reinforced with and including 8 mm dia TMT steel bars @ 150 mm C/C both way, one lifting handle made of 8 mm dia TMT bar embedded in precast cover slab and 15 mm dia medium grade GI pipe for watering with funnel having wire mesh and 40 mm dia medium grade GI pipe for protection of copper strip including providing charcoal or coke and salt in alternative layer of 15 cm complete all as shown in electrical plate No-3 including necessary earth work such as excavation, removal of soil n.exc 50 mtr, returning and refilling dismantling the old unserviceable earthing all as specified and directed.

Material and labour for fixing of Copper strip 20mm x 3.15mm with saddles and fixing screws,porcelain insulator with copper/brass nuts and bolts over the roof, wall, & pillar etc including taking down old one complete all as specified and directed.

Material and labour for making test point for lightning arrestor by providing of four numbers procelain insulator fixed on wall through rowal plug, rectangular block of size 75mmx75mmx25mm made of phosphorus bronze or gun metal mounted over the insulator in horizontal shape, connecting the earth strip and down lightning conductor with the help of copper or brass nuts, washers over the phosphorus bronze block including material and labour for making enclosure for test point made of mild steel steet of 1.6mm thick of size 250mmx250mmx250mm in box shape, openable from front side with locking arrangement,handle etc mounted/grouted into wall covering to the test point including taking down old one all as specified and directed at site.

Supply & fixing of switch flame proof rotary type with termination box LM6,16 Amps single pole 250 volt, 1 way complete all as directed.

Supply and fixing of Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A, 250V, P+earth complete all as directed.

Supply and fixing of Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 25A, 250V, P+earth complete all as directed.

Supply and fixing LED light fitting 1x40 Watt flame proof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size.

Supply and fixing of Flameproof on-off rotary switch rated current 16 A-125A , rated voltage 415 Volts, AC complete all as specified and directed by Engr-in- Charge.

Supply and fixing in replacement of GI Pipe medium grade 80 mm bore inclusive of all fittings such as tees bends, elbows, reducer, bell mouth tube ends and all fixing accessories such as couplers hook, nuts, saddlers, pipe hook etc (8.0 meter long) complete with GI base plate, finial taper plug, bolts, nuts & screws etc including making the holes on the pole (bottom and top) suitable size for drawing of wire 1.5 sqmm 3 core round flexible for connection of security light fitting from junction box to light fittings including of one primer coat, one under coat and one finishing coat of silver paint, excavation wherever required at site including dismantling/taking out old unserviceale one all as specified and directed.

Supply and fixing of Modular LED foot lamp 4 Module complete all as specified and directed.

Supply and fixing of Exhaust fan 300 mm sweep heavy duty complete with self closing MS louvers, mounted in suitable opening arrangement and suitable for operation on 230/240 Volts single phase, 50 Hz,1400 RPM , AC supply with and including two core PVC insulated, PVC sheathed copper conductor flexible cable 24/ 0.2 mm and making all necessary connection and fixed by using 4 Nos 100 mm long 10 mm dia bolts, nuts and washers and grouted in wall in CM 1:3 (including opening of wall etc) completed all as directed.Note :-Air delivery not less than 1250 Cum/Hr and power consumption not more than 60 Watts .

Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rating electric 230 volts AC,50 Hz complete with all accessories such as safety valve, thermostate,NRV, connection piece etc. fixed on wall by means of anchor fastners-04 Nos ,12mm dia and 150mm long grouted into wall and making good the disturbed surfaces with existing finishes complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and ccessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) ® with provision of cable PVC insulated and sheathed FRLS grade 3 core 1.0 sqmm copper conductor flexible wire 1100 volts grade from porcelain connector /ceiling rose to ceiling fan complete all as specified and directed.

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm with provision of cable PVC insulated and sheathed FRLS grade 3 core 1.0 sqmm copper conductor flexible wire 1100 volts grade from porcelain connector /ceiling rose to ceiling fan complete all as specified and directed.

Supply and fix single phase Electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH making all electric connections complete all as specified and directed.

Supply and fix three phase Electronic meters temper proof LCD display with polycarbonate cover 415V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time,current reading, load, PF, voltage and KWH making all electric connections complete all as specified and directed.

Note: The UNSV old one Item Srl No 92 to 97 are MES property and will be handed over to MES Store Yard .

Taking down fan, sealing cable end,dismantling blades and removing fan and blades to store complete all as specified and directed.

Supply and fixing LED wall reading light fitting 1x 5W (Warm white), 220V, AC decorative type with with ON/OFF switch including driver etc connecting up with three core flexible copper conductor cable of suitable size complete all as directed.

Supply and fixing LED Hanging Pendant light fitting 1x 10W(Dimension 22cmx32cm), 220V, AC decorative type with holder including 1x10 Watt warm yellow bulb connecting up with three core flexible copper cord length not less than 80cm from ceiling rose complete all as specified and directed.

Material and labour for road / path way any type (Concrete) cutting , including excavation, returning filling in, spreading, leveling, well ramming in layers, soiling with broken boulders/ stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix, carpeting 25 mm thick using ready mix patch mate material, rolled and compacted for road patch repair work, complete all as directed.

Excavation in trenches n exc 1.5 mtr wide and n exc 1.5 meter in depth for foundation, laying of cable, pole etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc. 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engr-in-Charge

Returning, filling in including spreading, levelling, watering and well ramming excavated soil in layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested,poles, stays , struts have been errected and tested , all as specified.

Removing excavated surplus (soil) obtained from excavation to a distance not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete, all as specified.

M & L for Brick protection for LT cable with sub class "B" bricks laid dry and flat abutting each other with gaps between adjacent bricks not exceeding 10mm with width equal to length complete all as specified and directed by Engr-in-Charge

Supply and laying dry river sand to be laid in 8 cms before laying of cable and 15 cms above cable in trenche as cable cushioning and covering complete all as specified and directed. Note: for payment purpose punned thickness shall be measured.

Taking out defective/unserviceable XLPE UG of size 16 sqmm 4 core to 25sqmm 4 core from roads/trenches required at site complete all as directed by Engr-in- Charge.

Supply, laying , jointing ,testing and commisioning LT underground cable 1100 volts grade XLPE insulated and steel strip or wire armoured heavy duty with multistranded aluminium conductor 25 Sqm 4 core size including taking out unserviceable complete all as specified and directed. Note:- (i) Excavation and earth work cable protection and sand cushioning shall be measured and paid seperately .

Ditto all as per item No 108 but size 16 sqmm 4 core

Supply and laying double wall corrugated pipe (DWC) confirming to IS 14930 Part-I of size 63 mm outer dia and 50 mm inner dia incl taking out old unserviceable complete all as directed.

Earthing complete with Galvanised steel earth plate electrode of size 60cmx 60cm x 6mm thick electrode buried directly in ground (earth pit not less than 2.25 meters deep below the normal ground level) with top edge of the plate not less than 1.5 m below normal Ground Level connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers and earth lead protected by 15mm dia GI pipe medium grade connected to main distribution board/ earthing test point all as shown on electrical plate No-03 of SSR Part-1 and all as specified including testing on completion.Note: The unit rate shall also include for excavation, earth work in hard/dense soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bars @ 150mm c/c both ways , GI funnel with watering pipe 20 mm dia, wire mesh, salt and charcoal, protection pipe for earth lead upto 7.50m long complete in addition to item No 1 (a) to (e) of preamble (notes) under sub heading earthing, specified in SSR part-II earth lead wire and protection pipe beyond 7.5m shall be measured and paid separately.

Deduct Schedule of Credit of Rs. (-) 101773.00 (Minus) as listed in Schedule 'A' Part-II. Contract Sum shall be arrived after deducting the credit amount Note: Tenderers will not quote against this item being a firm amount.

DAVINDER SINGH (BID ID -3481813)

K S BUILDERS (BID ID -3473502)

MAMTA ENTERPRISES (BID ID -3482483)

PRATAP TRADING CO (BID ID -3477207)