Loading…
Loading…
Tender Value
₹20.8 Cr
EMD Value
₹41.5 L
Closing Date
1 Sept 2026, 12:00 pm
Yes (up to 3 members)
No
Two Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
90 days
Expenditure
Capital (Works)
TENDER
15 conditions · 3 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V= Advertised value of the tender in crores of Rupees, N= Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/ audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-B of Chapter-7 along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/ Certificate from Chartered Accountant duly supported by Audited Balance Sheet, otherwise the offer is liable for rejection.
Any Civil Engineering Project comprising the construction of Road Over Bridges (ROB)/ Rail over Rail Bridge/ Major bridges including both substructure and superstructure, with the following attributes:Superstructure:Construction involving Plate Girders/ Steel- Concrete Composite Girders/ Open Web Girders/ Bow-String Girders.Substructure:Construction involving deep foundations (either pile or well foundations) for at least one major span.
N.B. Tenderers must submit work experience certificates as mentioned above for similar nature works completed/substantially completed in the last 7 years, along with all supporting documents duly self- attested/digitally signed. No clarifications regarding credentials will be entertained after bid submission; incomplete/inadequate submissions will be summarily rejected.
63 conditions · 9 needing a document upload
All Optional documents to be submitted before signing of Contract Agreement/or at the time of submission of Bid.
List of documents which are to be submitted by the tenderer along with their offer failing which the tender shall be summarily rejected.
If Bid Security is submitted through mode of Bank Guarantee then submission of scanned copy of the Bank Guarantee towards Bid Security of the bid on e-tendering portal (IREPS) and original of above Bank Guarantee before closing date of submission of bids (i.e. excluding the last date of submission of bids) as per Para-5 of Instructions to Tenderers (ITT) in Chapter- 2 and Para-6, Annexure-I in Chapter-2 of Annexed Document.
Technical Eligibility Criteria as per Para 10.1 & Para 17.15.1 of Chapter-2
Financial Eligibility Criteria as per Para 10.2 & 17.15.2 of Chapter-2 along with Certificate issued from Chartered Accountant.
Bid Capacity as per Para 10.3 & 17.15.3 duly filled up Annexure- G, Chapter-7 of Annexed Document.
Certificate as per the proforma enclosed vide Annexure-A and an additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be as per Annexure-A1 vide Chapter-7 of the Annexed Document.
Power of attorney duly notarized and in in favour of a single individual should be submitted. As per Para 14,15, 17 & 18 of SGCC.
List of important documents which are to be submitted by the tenderer along with their offer.
Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Certificates regarding contractual payments received, along with duly filled up Annexure-B, Chapter-7 of Annexed Document, to this effect which may be an attested Certificate from the concerned department/client or Audited Balance Sheet duly certified by the Chartered Accountant duly supported by Audited Balance Sheet.
List of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document.
List of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure- E, Chapter-7 of the Annexed Document.
Details of works completed/substantially completed during previous 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document.
All documents reflected as Mandatory in the Commercial Compliance are to be submitted other wise the offer is liable to be rejected.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please submit the Certificate of familiarization to the work site as per Chapter-6 of the Annexed Document.
Please submit copy of Certificate as per the proforma enclosed vide Annexure-A, Chapter-7 of the Annexed Document. An additional certificate in case of other than Company/Proprietary firm, Annexure-A-1 shall also be submitted by the each member of a Partnership Firm/ Joint Venture (JV)/ Hindu Undivided Family (HUF)/ Limited Liability Partnership (LLP) etc. as the case may be. Non-submission of the Certificates by the bidder shall result in summarily rejection of his/their bid. It shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Please submit details of the constitution of Firm i.e. Proprietary Firm/Partnership Fm/HUF/JV/Company Registered under Companies Act-2013/Limited Liability Partnership/Registered Society & Registered Trust etc along with signed Annexure-C, Chapter-7 of the Annexed Document.And also submit the following mandatory supporting documents such as copies of Partnership Deed, Power of Attorney, Memorandum of Articles, Articles of Association, Authorisation, Certificate of Incorporation, Certificate of Registration, Deed of Formation, Memorandum of Understanding, JV Agreement etc as applicable under Para 14, 15, 17 & 18 of Annexure-I, Chapter-2 of Annexed Document. Important Note:-(a)The Power of Attorney duly Notarized shall be submitted even if such specific person is authorized for above purpose through Partnership Deed/Memorandum of Understanding/Article of Association or such other document. (b) In case one or more of the members of JV is/are partnership firm(s)/Proprietary Firm/HUF/Companies/LLP Firm(s)/Society(s)/Trust(s), the required documents of each individual member of JV shall be submitted along with the documents to be submitted on behalf of the JV. (c) Non- submission of above documents (except PAN Card & Undertaking regarding not blacklisted/debarred from participation of tenders/contracts) or submission of incomplete documents shall lead to summarily rejection of the offer.
Please submit copy of the PAN Card.
Please submit list of Plant & Machinery available on hand and proposed to be inducted and hired for the tendered work as per the format vide Annexure-D, Chapter-7 of Annexed Document. Non-compliance with this condition liable to result in the tender being rejected.
Please submit list of personnel/organization on hand and proposed to be engaged for the tendered work as per the format vide Annexure-E, Chapter-7 of the Annexed Document. Non- compliance with this condition liable to result in the tender being rejected.
Please submit details of works successfully completed or substantially completed during last 07 years ending last day of month previous to the one in which tender has been invited as per the format vide Annexure-F, Chapter-7 of the Annexed Document. Non-compliance with this condition is liable to result in the tender being rejected.
The tenderer(s) are required to upload the information as per Annexure-G of Chapter-7, Annexed Document duly signed by the tenderer(s) and verified by Chartered Accountant since the information is required to evaluate the bid capacity of the tenderer(s) for tenders valuing more than Rs. 10 Cr. However, the tenderer(s) may submit any additional information, if they desire so. In case, the tenderer(s) failed to submit the minimum required information as per Annexure-G of Chapter- 7 along with the offer or submit in any other format omitting required information essential to work out Bid capacity, his/their offer shall be rejected summarily. This information is to be based on Annexure-B & Annexure-G1, Chapter-7 of Annexed Document.
Please submit the required information for evaluation of Bid Capacity as per Annexure-G1, Chapter-7 of the Annexed Document.
Please submit the information regarding association of Railway Officers with tenderer(s) in reference to Clause 16, Chapter-2 of Annexed Document along with the declaration as per the format vide Annexure-H, Chapter-7 of the Annexed Document. Also non-submission of information required as per Clause 16 (a), (b) & (c) of Chapter-2 in Annexed Document, contract is liable to be dealt in accordance with provision of Clause 43 of Chapter-3 (Clause 62 of General Conditions of Contract).
Please submit list of court cases as per the format vide Annexure-I, Chapter-7 of the Annexed Document.
Please submit list of arbitration cases as per the format vide Annexure-J, Chapter-7 of the Annexed Document.
Please submit broad plan of execution of work as per the format vide Annexure-K, Chapter-7 of the Annexed Document.
Please submit details of other credentials/facilities as per the format vide Annexure-N, Chapter-7 of the Annexed Document.
Please submit your bank details i.e. Name of Bank along with Bank Branch Code, Accounts Number as appearing in the cheque book, IFSC Code and PAN Number, duly certified by the authorised official of the bank, to facilitate payment through ECS/NEFT/RTGS as per Annexure-O of Chapter-7 of Annexed Document. In lieu of Bank Certificate, scanned copy of a cancelled cheque may be attached for verification of the above particulars.
If Bid Security is submitted through mode of Bank Guarantee then please upload scanned copy of the Bank Guarantee (as per Specimen Format at Annexure-Q, Chapter-7 of Annexed Document) submitted towards Bid Security, original of which should be delivered in person to the official nominated as indicated in the tender document before closing date of submission of bids (i.e. excluding the last date of submission of bids). Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within above specified period shall lead to summary rejection of bid. In case of the Bid Security deposited through e- payment gateway, then the same should be confirmed by the tenderer.
Please submit the option for taking payment through Letter of Credit (LC) arrangement for tenders having advertised cost of Rs. 10 lakhs and above. For details refer Clause-7, Chapter- 4 of Annexed Document.
Please submit the required certificate (duly certified by a Cost Accountant /CA)as per Clause 8.9(b), Chapter-4 of Annexed Document.
Please submit the Tender Form i.e. Annexure-I of Chapter-2 of Annexed Document.
Construction of Road Over Bridge (1x36.0m+1x18.0m) Composite Girder (Bridge proper) for Rly. portion and 5x18m RCC Girder on Golanthara/NH-16 & 13x18.0 RCC Girder on State portion at km614/23-25 in lieu of LC no.-322 at km 614/21-23 in between stations Golanthara-Surla road on HWH -VSKP main line under Khurda Road Division. (Railway potion only)
CAOCRSPBBS-38-2026
CAOCRSPBBS-38-2026
Open
Works - General
18 Months
Khordha, Odisha
₹0
₹41.5 L
28 Jul 2026
28 Jul 2026
18 Aug 2026
107 items across 6 schedules · ₹21,11,81,984.07 total
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| Earthwork in excavation by mechanical means (Hydraulic Excavator)/Manual Means for foundations and floors of the bridges, retaining walls etc. including setting out, dressing of sides, ramming of bottom, getting out the excavated material, back filling in layers with approved material and consolidation of the layers by ramming and watering etc. including all lift, disposal of surplus soil up to a lead of 300m, all types of shoring and strutting with all labour and material complete as per drawing and technical specification as directed by Engineer in charge. Note: This item will be used for excavation work in connection with other miscellaneous works also like side drains, foundation for OHE masts and other miscellaneous structures in connection with Gauge Conversion, Doubling, New lines. | — | — | — | — | |
| 1 | All kinds of soils | cum | 1240.00 | 194.13 | 2,40,721.2 |
| 2 | Soft rock (not requiring blasting) | cum | 200.00 | 401.49 | 80,298 |
| 3 | Hard rock (blasting prohibited ) | cum | 200.00 | 1,106.76 | 2,21,352 |
| Providing and laying in position Plain cement concrete of specified Nominal Mix f o r miscellaneous works like side drains, foundation for OHE masts and other miscellaneous structures excluding the cost of Cement, centering and shuttering - All work up to plinth level : | — | — | — | — | |
| 4 | 1:1½:3 (1 Cement: 1½ coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size) | cum | 70.00 | 3,577.2 | 2,50,404 |
| 5 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 40 mm nominal size) | cum | 16.00 | 3,441.19 | 55,059.04 |
| 6 | Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality in RCC raft foundation & Pile cap including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. | cum | 800.00 | 3,777.08 | 30,21,664 |
| Providing and laying in position machine batched, machine mixed and machine vibrated Cement Concrete of specified grade as per approved Design Mix (mixed in Mobile Concrete Batching/Mixing Plant at site or RMC from approved plants) using 20mm graded crushed stone aggregate and coarse sand of approved quality for the following Reinforced cement concrete structural elements up to height of 9.0 m from foundation top level, including finishing, using Plasticiser in approved proportions (as per IS:9103), to modify workability without impairing strength and durability complete as per specifications and direction of the Engineer in charge. N o t e : 1. Payment for cement, reinforcement and shuttering shall be made extra under relevant item. 2. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. | — | — | — | — | |
| 7 | Abutment & Pier | cum | 237.68 | 3,842.31 | 9,13,240.24 |
| 8 | Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. | cum | 230.00 | 3,874.93 | 8,91,233.9 |
| 9 | Approach slab at formation level, Dirt wall/ ballast wall at formation level | cum | 500.00 | 3,809.7 | 19,04,850 |
| Boring, providing and installation of bored cast in-situ Reinforced Cement Concrete piles using Hydraulic piling Rig of specified diameter and length below pile cap of specified grade with Design Mix Cement Concrete, using 20mm graded crushed stone aggregate and coarse sand of approved quality, to carry a safe working load not less than specified, concreting by machine batching, machine mixing, scaffolding, using Admixture in approved proportion (as per IS:9103), placing with tremie pipe, chipping off of pile top to remove laitance concrete above cut off level etc., pumping and bailing out water complete in all respect as per approved drawing, specification and direction of the Engineer in charge. Note: 1. Payment for only cement, reinforcement shall be made extra. 2. Length of the pile for payment shall be measured up to the bottom of RCC pile Cap. 3. Plasticiser shall invariably be used in approved proportion to increase workability with minimum possible quantity of cement for all grade of Design Mix Concrete unless it is specifically approved citing reasons for not using plasticiser at the stage of Mix Design and in that case deduction shall be made as per relevant item. | — | — | — | — | |
| 10 | 1200mm diameter | Metre | 1000.00 | 10,029.78 | 1,00,29,780 |
| 11 | Providing, fabricating and installing permanent casing pipe for bored piles for all diameters with specified thickness of steel plate including all labour, materials, tools & complete as per approved drawing & specifications complete in all respect as per the direction of Engineer in charge. Note: Payment shall be made as per the weight of circular plate of casing pipe only. | MT | 85.00 | 1,08,148.95 | 91,92,660.75 |
| Extra for chiselling in addition to boring of piles, if chiselling is required to be resorted to in hard rock or big stone boulders larger than 30cm, manually or by any other means. | — | — | — | — | |
| 12 | 1200mm diameter pile | Metre | 150.00 | 4,471.66 | 6,70,749 |
| Conducting load test of a single pile up to specified capacity in accordance with IS:2911 (Part-IV) including installation of loading platform and preparation of pile head or construction of test cap and dismantling of test cap after test etc. with all labour, material, tool & plants, equipment, machinery, etc. complete as per drawing and specification, as directed by the Engineer. | — | — | — | — | |
| 13 | Initial load test above 100 ton and up to 250 T capacity pile | Each | 6.00 | 89,785.37 | 5,38,712.22 |
| 14 | Extra for every increase of 50 ton in pile capacity or part thereof over 250 ton | Each | 12.00 | 4,907.26 | 58,887.12 |
| Lateral load testing of single pile in accordance with "IS Code of practice IS:2911 (Part-IV) for determining safe allowable lateral load of pile" with all labour, material, tool & plants, equipment, machinery, etc complete as per drawing and specification as directed by the Engineer. | — | — | — | — | |
| 15 | Piles with lateral load capacity of up to 50 ton | Each | 6.00 | 20,283.13 | 1,21,698.78 |
| 16 | Providing and applying two coats of coal tar or bitumen confirming to IS:3117- latest version on the top and sides of RCC box/slabs @ 1.70 kg/sqm after cleaning the surface with all labour and materials complete job as directed by the Engineer. | Sqm | 650.00 | 126.98 | 82,537 |
| Centering and shuttering including strutting, propping etc. and removal of form for : | — | — | — | — | |
| 17 | All types of bridge sub-structures, e.g. pier, abutment, wing wall, retaining wall, RCC box type foundations, Abutment cap, Pier Cap, Inspection Platform & Pedestal over Pier cap, Fender wall, Diaphragm wall etc. up to 5m above ground level | Sqm | 1754.40 | 665.63 | 11,67,781.27 |
| 18 | All types of bridge super-structures, e.g. slabs, I-girders, T-girders, Box girders etc. up to 5m above ground level. | Sqm | 448.00 | 868.54 | 3,89,105.92 |
| 19 | Extra for additional height over item no. 025031 & 025032 wherever required with adequate bracing, propping etc. over initial height of 5 metres for every additional height of 1 metre or part thereof. | Sqm | 250.00 | 107.45 | 26,862.5 |
| 20 | Supplying, spreading and filling coarse sand (no cohesive materials to be used) of approved quality including watering and ramming in foundation, behind the abutment, wing wall, retaining wall in layers not exceeding 150mm thick including its compaction as per direction of Engineer-in-charge. The rate includes all lead, lift, ascent, descent, crossing of Railway line etc. complete with contractor's labour, materials, tools and plant. | cum | 104.00 | 1,841.69 | 1,91,535.76 |
| Schedule total | ₹3,00,49,132.7 | ||||
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
etenderSpecialConditionforLC322.pdf
ATTACHMENT
Railway Board Letter
ATTACHMENT
2026_06_16Acceptanceofe-BankGuaranteee-BGinWorksContractsandPGMS_PMS_PSSAGC.pdf
ATTACHMENT
CombineGADforROB322.pdf
ATTACHMENT
ReferenceDWG36mCGRDSO-B-11778.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].