MAINTENANCE AND REPAIRS TO BUILDING WORKS SUCH AS JOINERY, INTERNAL WATER SUPPLY LINES, SOIL/ WASTE/ VENT PIPES, SEWER LINE, DRAINAGE LINE ETC AT NARAINA BAGH AND CHANAKYA BAGH INCL NCS AT CHANAKYAPURI IN THE AOR OF AGE B/R NAVY UNDER GE NEW DELHI

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed.

Material and Labour for Brickwork with sub-class `B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar (1:6) complete all as specified and as directed.

Material and Labour for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.

Material and Labour for 15mm thick rendering in cement mortar 1:6 on fair faces of brickwork of walls, finished even & smooth without using extra cement complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as directed.

Material and Labour for Polymer modified cementious bonding coat, prepared and applied on the concrete/ masonry surfaces with 1 part of Styrene Butadiene Rubber latex emulsion (SBR latex) with 4 parts of water and 6 parts of cement by weight, Coverage of SBR latex -0.25Ltr/sqm for one coat complete all as specified and as directed.

Material and Labour 15 mm thick polymer modified plaster in CM (1:4) on fair face of brickwork or concrete surfaces of walls finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and as directed.( SBR latex shall be measured and paid separately)

Supply only Styrene Butadiene Rubber latex emulsion.

Material and Labour for preparation of new plastered surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over and including one coat of putty complete all as specified and as directed.

Material and Labour for Preparation of new plastered or un-plastered surface of walls and applying two coats of oil bound distemper on walls over a coat of primer over and including a coat of putty complete all as specified and as directed.

Supply and fix GI wire netting 0.9mm dia and 12mm mesh lathing to wood or metal studding, joist etc in walls, ceiling stachions, beams etc incluidng all laps cutting and waste complete all as specified and as directed.

Material and Labour for 10 mm thick polymer modified plaster in cement mortar (1:4) on fair face of brickwork or concrete surfaces on ceiling finished even and smooth without using extra cement and using SBR latex emulsion @ 4% by weight of cement complete all as specified and as directed.( SBR latex shall be measured and paid separately)

Material and Labour for Preparation of new plastered or unplastered surface of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed.

Material and Labour for washed stone grit plaster on exterior walls in two layers, under layer 12mm thick in cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 2 kg of cement per square metre, top layer 15mm thick in cement plaster 1:1/2:2 (1 cement: 1/2 marble powder : 2 marble chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the marble chippings and forming groove of uniform size 15 mm wide and 15 mm deep in top layer of grit plaster using wooden battens all round as per approved pattern. The groove shall be finished with two coats of bitumenous paint complete all as specified and directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) n.exc 1.5 sqm each complete all as specified and as directed.

Taking down chowkhats with shutter (without taking off shutters from the frame) exc 1.5 sq m but n.exc 4sqm each complete all as specified and as directed.

Taking down shutters of any description exc. 1 sqm and n.exc. 2 sqm each complete all as specified and as directed.

Supply and fix factory made PVC internal door frame of the size 100mmx45mm with a wall thickness of 5mm, made out of extruded 5mm thick prelam sheet, mitred cut at two corners and jointed with 2 nos. of 150mm long brackets of 15mmx 15mm MS tube. The two vertical door profiles are to be reinforced with 40mmx20mm MS tube of 19 gauge through out the frame. The door frame shall be fixed to the wall using 65/100mm long MS Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2 Nos. for horizontal member etc. complete as per manufactures specification and directed by Engineer-in-charge

Supply and fix 35mm thick factory made solid PVC Moulded door shutter, consisting of solid core single leaf flush door of 30mm thickness, lipped with 15mm(5mmx3) thick 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick termite proof and fire resistant moulded PVC sheet with 2,4 or 6 raised panel design in different plain and / OR prelam colours on one side after routing the moulded design on flush door & 2mm thick plain and/ OR prelam PVC sheet on the other side using rubber adhesive on flush door & solvent cement adhesive on the PVC lipping etc complete as per direction of Engineer -in charge, manufacturer’s specification and drawing

Supply and fix 35mm thick 2nd class hardwood rail and style, glazed and skeleton shutters open rebated and prepared to receive glass or gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of rail and stile, etc. as specified in SSR part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats, complete all as specified and as directed.

Material and Labour 35mm thick 2nd class HW rail and style, factory made plain framed panelled shutter (two panels) with lock rail and panel of 9mm BWP commercial ply. The sizes of rail and stile as per IS: 1003 (Part-I) kiln seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides,supplied and fitted to chowkats complete all as specified and as directed.

Supply and fix steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed.

Supply and fix steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed.

Material and Labour for MS framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete Fe 410-W (Gde-E-250 quality -A) complete all as specified and as directed.

Supply and fix MS Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to FE-290 Gde-E-165

Supply and fix Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Supply and fix 3mm thick plain sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Supply and fix butt hinges100mm medium weight, cold rolled, mild steel complete all as specified and as directed.

Supply and fix aluminium handles cast type anodised 150mm complete all as specified and as directed.

Supply and fix 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Material and Labour for preparation of new wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Supply and fix in repair aluminium powder coated 3 track bombay sliding window 2 bays made out of hollow extruded aluminum section as mentioned below and glazed with 4 mm thick clear glass and stainless steel wiremesh fixed with rubber beading/gasket and aluminiun anodised beading all around and lock type handle of size 75mm, provision of rollers with track etc complete all as specified and directed (a) Chowkat - size 50.30 x 26 x1.60 mm thick, (b) Shutter top and bottom rail - size 37.50 x 15 x 1.00 mm thick (3 set shutter), (c) Shutter inner rail - size 37.50 x 15 x 1.00 mm thick (for 3 set shutter) Make:- Jindal/Indel

Supply and fix in repairs aluminium powder coated glazed window chowkhat made out of section 63.5x38.10x1.60 mm and shutter made out of 47x44.45x1.60 mm thick complete with 02 No 75 mm Al hinge, 01 No 150 mm long aluminium tower bolt, aluminium stay one No and two No aluminium handle 100mm long in each shutter including 4mm thick glass fixed with aluminium beading, rubber packing etc. complete all as specified and as directed.

Supply and fix in repairs aluminium powder coated wire gauzed window chowket made out of section 63.5x38.10x1.60 mm and shutter made out of 47x44.45x1.60 mm thick complete with 02 No 75 mm Al hinge, 01 No 150 mm long aluminium tower bolt, aluminium stay one No and two No aluminium handle 100mm long in each shutter including galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm including aluminium beading, etc. complete all as specified and as directed.

Supply and fix in repairs aluminum powder coated grill made of 6mm dia aluminium bars, size of mesh 100mm by 100mm fixed together with aluminium U channel all round the grill complete fixed in position and as specified & directed.

Supply and fix in repairs aluminium powder coated door using 101.6mm x44.45mm x 2.00mm chowkhats and 85mmx44.45mm x 2 mm section vertical stile and 101.6mm x44.45mm x2mm rails including 5 mm thick glass and Partly/fully fixed with 12mm thick prelaminated particle board fixed with aluminium snap beading and rubber gasket, each shutter will be fitted with 01 No tower bolt 200mm, 02 Nos handle D type 200 mm long and one hydraulic floor spring & mortice lock all as specified.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each and refixing after easing & adjusting in same opening complete all as specified and as directed.

Taking down shutters of any description nexc 1 sqm each and refixing after easing & adjusting in same opening complete all as directed

Resecuring or easing & adjusting without taking down shutters of any description nexc 1 sqm each complete all as specified and as directed.

Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and nexc 2 sqm each complete all as specified and as directed.

Supply and fix in repair 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

Supply and fix in repairs butt hinges 100mm medium weight, cold rolled, mild steel fixed with welding or screws on position complete all as specified and as directed.

Supply and fix in repairs stanless steel hinges 100mm medium weight, fixed with welding or screws on position complete all as specified and as directed.

Supply and fix in repairs aluminium handles cast type anodised 150mm complete all as specified and as directed.

Supply and fix in repairs 200mm aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix in repairs drapery rod 25 mm dia stainless steel of grade 304 with side caps etc fixed in position with stainless steel brackets complete all as specified and as directed.

Supply and fix in repairs Stain less steel plate rack made of stainless steel 1mm thick 900mmx 600mm complete all as specified and as directed.

Supply and fix in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including PVC waste pipe and CP waste fitting overall size 915mmx460mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

Supply and fix in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, including PVC waste pipe and CP waste fitting overall size 495mmx420mm bowl size 410mmx330mmx160mm complete all as specified and as directed.

Supply and fix in repairs galvanised mild steel wire cloth 0.56 mm nominal dia or wire and an average width of aperture 1.18 mm and fixed with tinned tacks or galvanised wire staple etc complete all as specified and as directed.

Material and Labour for Securing glass of any description in existing wooden frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed.

Material and Labour for Securing glass of any description in existing metal frames glazed with putty/ beads including removing loose or decayed putty/beads, painting/oiling one coat on rebates, grooves, reputtying and painting/oiling puttied surface to match existing work (New length of frame reputtied shall be measured) complete all as specified and as directed.

Material and Labour for running welding in repairs exc 2.5 cm length but n.exc 5 cm (thickness of metal to be welded n.exc 6 mm) complete all as specified and as directed.

Hacking out old broken glass any thickness, size quality or description from steel or wooden frame fixed, glazed with putty or fixed with beads and Supply and fix 3 mm thick frosted glass in square fixed with putty or beads complete all as specified and as directed.

Hacking out old broken glass any thickness, size quality or description from steel or wooden frame fixed, glazed with putty or fixed with beads and Supply and fix 4 mm thick plain sheet glass in square fixed with putty or beads complete all as specified and as directed.

Dismantling boarding, any description fixed in any position with screws complete all as specified and as directed.

Material and Labour for 12 mm thick Gypsum board false ceiling fixed with counter sunk screws on and including GI frame work comprising GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to sorrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.90mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at apprx 900 mm centre to centre with GI cleat and steel expansion fastener with and including ceiling section (n exc 1.20 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across intermedate at 457mm centre to centre at desired heights below roof slab, including two coats of plastic emulsion paint (approved colour) over a coat of primer on exposed surfaces of ceiling boards complete all as specified and directed.

Supply and fix to true horizontal level 600x600mm grid panels false ceiling manufactured by M/S Armstrong World Industries using hot dipped galvanised steel sections exposed surface with precoated capping, Main Tee of size 24x32 at every 12mm c/c maxi, rotary stitched cross Tee of size 24x27 mm at every 1200 mm c/c and wall angle of size 19x19 mm fixed to perimeter wall. The complete grid is to be suspended at every 600 mm c/c in both directions by using 2 mm dia pre straightened GI wire at every 1200 mm interval at the main Tee using fine finished tagular edge and Material and Labour for mineral fibre ceiling boards of size 600x600x16mm fixed with staples on snap grid complete all as specified and directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for exc 500 Ltrs and n. exc. 1000 Ltrs capacity of tanks complete all as specified and as directed.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc for exc. 250 Ltr but n. exc 500 Ltrs capacity of tanks complete all as specified and as directed.

Material and Labour for cleaning inlcuding clearing of main sewage line choke/blockage and de-silting of sewage lines upto and including 300mm internal diameter of any depth upto three meter depth. The cleaning shall be carried out with sewage equipments (sewage pump, sewage cleaning cable, scaffolding, fawra etc ). The sludge deposited in the sewage line shall be fully cleaned and disposed off the same outside the MoD land at any distance and without any additional cost on the same day when it was taken out. The job shall be carried out with safety precaution equipments and with strict supervision complete all as specified and directed.

Cleaning to blockage of floor traps, WC and Wash hand basin,Bath room complaints received from the users of NSB-ll Naraina and NSB-I Chanakyapuri complete all as specified and directed.

Cleaning of manholes by removing the sludge from manhole by manually or by mechanically (by pump or mortar) and dispose off the sludge outside defence land any depth n exc 3.00m complete all as specified and directed.

Excavation in trenches in soft/ loose soil not exceeding 1.5 m wide n.exc 1.5m depth for foundation, etc for shaft, wells, cesspits, man holes, pier holes etc. n.exc 10sqm on plan and n.exc 1.5m depth and getting out including removal of surplus soil outside MoD land complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.in soft or loose soil complete all as specified and as directed.

Supply and fix in repairs factory made manholes covers with MS flat all round the cover and including reinforecement with cement conc 1:2:4 type B-1, (using 20mm graded stone aggregate) of any thickness and size laid with cement mortar 1:6 in position complete all as specified and as directed.

Material and Labour for complete removal of existing treatment from old decorated plastered wall surfaces and applying two coats of oil bound distemper over a coat of primer and over and including 3mm thick wall care putty complete all as specified and as directed.

Material and Labour for preparation of old plastered surface of walls and applying one coat of oil bound distemper on walls complete all as specified and as directed.

Material and Labour for complete removal of existing treatment from old surfaces of wall and applying two coats of Exterior Emulsion paint over one coat of primer and over incl one coat of Birla putty all as specified and directed.

Material and Labour for preparation of old wood or wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and Labour for preparation of old steel and iron surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Material and Labour for complete removal of existing treatment from old plastered surfaces of ceiling and applying three coats of white wash complete all as specified and as directed.

Supply and fix PVC chhaja (Factory made) exc 0.2 sqm and not exc 0.6 sqm and fastener 150mm long with complete set as per sample including demolition of old RCC chhaja complete all as specified and directed by Engr-in-charge and approval by GE Note: Work has to be executed upto (G + 3 storey) building

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Material and Labour for vitrified ceramic light coloured tiles10 mm thick (square /rectangular) area of each tiles not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed with white or coloured cement laid over 20mm thick Screed bed or bedding layer of cement mortar 1:6 complete all as specified and as directed. ( Make: Kajaria, Somany, Orient, Nitco, Marboniite)

Material and Labour for vitrified ceramic light coloured tiles10 mm thick (square /rectangular) polished, area of each tiles not exceeding 0.09 sqm, in skirtings or vertical surfaces etc. set and jointed in neat cement slurry and pointed with white or coloured cement laid over 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed. ( Make: Kajaria, Somany, Orient, Nitco, Marboniite)

Supply and fix Non skid joint less coloured ceramic tiles 7-8mm thick, area of each tile exc 0.11 Sqm n.exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with over and including 15 mm thick screed bedding in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for glazed ceramic coloured digital tiles in vertical surfaces 450x300x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement over 10mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and as directed.

Supply and fix glazed ceramic coloured tiles in vertical surface 300x200x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 10mm thick rendering or bedding layer of cement mortar 1:4 complete all as specified and as directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing 25 mm bore and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply and fix 15mm bore medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

Supply and fix 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

Supply and fix 25mm bore medium grade galvanised steel tubing with all fittings and fixed complete to wall or laid in floor complete all as specified and as directed.

Supply and fix in repairs CP grating 100 mm dia round fixed on floor/Nahani trap fixed with white cement including necessary cutting etc complete all as specified and as directed.

Supply and fix in repair brass chromium plated shower rose 125mm size with or without swivel joints including fixing to steel pipe complete all as specified and as directed.

Supply and fix in repairs 15 mm dia brass chromium plated pillar tap, with capstan head screwed for 15 mm bore of pipe complete all as specified and as directed.

Supply and fix in repairs chromium plated cast copper alloy angle valve with capastan head screwed down ends for high pressure for 15 mm bore iron pipe complete all as specified and as directed.

Supply and fix in repairs 15 mm dia brass chromium plated Bib tap fancy type with capstan head screwed down for iron pipe complete all as specified and as directed.

Supply and fix in repair 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as directed. (Minimum weight -90gms).

Supply and fix in repair PVC Cup Board made of 18 mm thick (solid PVC sheet) (Plus / minus 0.7mm) celuka PVC ply complete for hold of shelf / partition and shall provide 3 edges in sizes 18 mm x 18 mm as per required length, the edges of shelf / partition / wall side to be lipped with 18 mm x 1 mm thick PVC sheet of density 600 Kg /cum manufactured by an ISO -9000 certified company , using solvent cement etc.(including all necessary Aluminium hardware fitting i.e Piano hinges, 4 handles, ball catchers including locking arrangement in each Cup board including dismantling of existing complete in all respect as specified and directed.

Supply and fix in repair 15mm bore Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and as directed.(Minimum weight -90gms)

Supply and fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe, 25 mm dia and fixed. (Minimum weight -455gms) complete all as specified and as directed.

Supply and fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe, 20 mm dia and fixed. (Minimum weight - 210 gms) complete all as specified and as directed.

Supply and fix in repairs Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe, 15 mm dia and fixed. (Minimum weight -142gms) complete all as specified and as directed.

Supply and fix in repairs PVC connection 15 mm bore 450 mm long with 2 Nos PTMT nuts with washer complete all as specified and as directed.

Material and Labour for 20mm dia CP finish brass alloy towel rail, 600mm long fixed in repairs complete all as specified and as directed.

Supply and fix in repairs corner glass shelf of size 300x300 mm made of transparent toughened glass 5 mm thick and chromium plated double railing on front side and chromium plated knobs on both sides fixed in position complete all as specified and directed.

Supply and fix glass shelf of size 500 X 125 mm conforming to Prayag Cat Part No. "DROPLETS" BEA-45 with stainless steel railing and stainless steel fasteners fixed on wall complete all as specified and directed.

Supply and fix in repairs waste fittings brass chromium plated 32 mm dia for wash hand basin complete all as specified and as directed.

Supply and fix in repair Vitreous China urinal, half stall type, white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1`:2 , securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement and including Supply and fix CP brass urinal spreader complete all as specified and as directed.

Supply and fix in repairs brass chromium plated urinal spreader heavy duty suitable for half stall urinal fixed with stainless steel screws in position complete all as specified and as directed.

Supply and fix in repairs Vitreous China wash down water closet pan, pedestal pattern, white complete all as specified and as directed.

Supply and fix in repairs plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised device suitable for pedestal pattern white complete all as specified and directed

Supply and fix in repair brass chromium plated jet suitable for pedestal pattern water closet along with flexible pipe and fixed with water closet in position with plate and nuts and bolts complete in position all as specified and directed.

S & F in repair Stainless steel finish copper alloy health faucet with 1.20 mtr long flexible pipe 8mm dia and wall hook, fixed complete in position for pedestal pattern WC all as specified anddirected by Engr-in-Charge. Make: Prayag , Johnson, Cera

Supply and fix in repairs china water closet Orissa Pan 580 X440mm long pan Ist quality ISI marked with cast iron 'P' or 'S' trap including provision of cement concrete bedding including connections to flushing cistern/pipe and making good disturbed portion to match existing surfaces complete in all respect as specified (Make: CERA, Hind ware, Parryware)

Demolittion of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed

Material and Labour for providing cement concrete type E-2, 1:5:10 (using 40mm graded stone aggregate) as in mass concrete and filling etc complete all as specified and directed

Supply and fix in repairs Wash Hand Basin of size 550mmX425mm counter top white including 32mm bore dia CP waste coupling, complete all as specified and directed

Supply and fix in repairs Wash hand basin flat back of size 550x400mm ISI marked Ist quality including CI/MS brackets including cutting for and pinning in brackets but including PVC waste pipe, PVC waste coupling complete in all respect as specified (Make: CERA, Hind ware, Parryware)

Supply and fix in repairs 32 mm bore PVC waste pipe for WHB complete all as specified and directed.

Supply and fix in repairs 40 mm bore PVC waste pipe for urinals/sink complete all as specified and directed.

Supply and fix in repairs waste fittings brass chromium plated 40 mm bore for stainless steel sink/urinals

Supply and fix in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union, end plug etc for 15 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI tubing upto 1.5 m included in rates)

Supply and fix in repairs small fittings galvanised iron medium grade such as socket, elbow, nipple, Tee, union, tank nipple, end pug etc for 20 mm bore pipe (ISI marked) complete all as directed (Note:- Refixing of old GI tubing upto 1.5 m included in rates)

Supply and fix in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete all as specified and directed

Petty repair/adjustment to washer, Syphon, Syphon washer etc, for high or low level flushing cistern and making functional complete all as specified and directed

Supply and fix in repairs PVC handle for low level flushing cistern all as directed complete all as directed

Supply and fix in repairs cast iron oval access door fixed with rubber gasket and suitable nuts for 100/75 mm bore cast iron pipes fitting as branch pieces/ door bends etc fixed in position complete upto four storey building block including necessary steel scaffolding complete all as specified and directed.(ISI marked)

Cutting into existing manholes for connecting new pipes, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished and reforming benching as required for 150mm bore of pipe complete all as specified and directed

Demolition and breaking up drain pipes of 100 mm / 150 mm (Salt glazed ware, AC / PVC/CI or Reinforced concrete) set in cement mortar or any description especified or directed by Engr in charge

Material and Labour for PVC (SWR) pipes of 150 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed

Material and Labour for Concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 type C-2 for 150mm bore of pipe complete all as specified and directed

Material and Labour for PVC (SWR) pipes of 150 mm bore single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed

Material and Labour for PVC (SWR) pipes of 110 mm bore single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed.

Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls as in rain water pipes of four storied buildings complete all as specified and directed.

S & F in repairs 15mm bore gun matel globe or gate valves, with iron wheel head, screwed both ends for iron pipes fixed complete all as specified and directed.

S & F in repairs 20mm bore gun matel globe or gate valves, with iron wheel head, screwed both ends for iron pipes fixed complete all as specified and directed.

S & F in repairs 25mm bore gun matel globe or gate valves, with iron wheel head, screwed both ends for iron pipes fixed complete all as specified and directed.

Supply and fix in repairs hydraulic floor door spring (ISI Marked) suitable for aluminium door including taking down door and refixing in position complete in all respect as specified and directed by Engr-in-Charge.

Demolition of stone slabs and tiles of any description or thickness in floors/walls, aprons etc laid bedded and pointed in any mortar complete all as specified and directed.

Material and Labour for 18 mm thick granite (of any type) machine cut as in platforms, stage top etc, bedded and jointed with grey cement slurry and pointed with white cement with admixture of of pigment to match the shade of granite stone including grinding and polishing laid over 15 mm thick screed bed or bedding layer of cement mortar 1:6 complete all as specified and directed.

Material and Labour 18 - 20 mm thick (Zet black or equivalent) granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) including one number SS clamps (graded - 202) of flat 30mm x 2mm 150mm long made to shape in each slab with drilling hole for hold fastener and12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl grinding and polishing laid over and including 10 mm thick rendering in cement mortar 1:4 complete all as specified.

Material and Labour for PU coated machine pressed precast concrete paver block of any tint, shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Grade in any tint, as in floors/pavings laid over and including 40 mm thick sand cushioning layer complete all as specified and directed.

Supply and fix in repairs water tank cover any type suitable for water tank of capacity exc. 250 Ltr but n. exc 500 Ltrs fixed with brackets and screws complete all as specified and directed.

Supply and fix in repairs water tank covers any type suitable for water tank of capacity exc 500 Ltrs but n. exc. 1000 Ltrs fixed with brackets and screws complete all as specified and directed.

Dismantling water tanks exc 250 ltr but n.exc 500 ltr and removal from site complete all as specified and directed.

Dismantling water tanks exc 500 ltr but n.exc 1000 ltr and removal from site complete all as specified and directed.

Supply and fix 500 litres capacity polyethylene three layered water storage loft tanks (rectangular or square with closed top) hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and directed. Make of tank :- Sintex/Rotex/Polywell

Supply and fix 500 litres capacity Rotational moulded polyethylene five layered water storage tanks (Cylindrical vertical with threaded top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and directed. Make of tank :- Sintex/Rotex/Polywell

Supply and fix 1000 litres capacity Rotational moulded polyethylene five layered water storage tanks (Cylindrical vertical with threaded top cover) white or blue in colour, pure anti bacterial film inside of tank, hoisted & fixed in position including Tank Nipple and with union (Two Nos each) , fittings complete all as specified and directed. Make of tank :- Sintex/Rotex/Polywell

Material and Labour for dismantling of Asbestos cement (Corrugated semicorrugated,etc ) sheets including hooks any type in roof covering complete all as specified and directed.

Supply and fix Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description and any position not otherwise provided for complete all as specified and directed.

Supply and fix MS framed work as in tubular trusses or square hollow sections for trusses, purlins, posts and the like fixed with angle cleats and connecting plates etc. including necessary cutting and welding etc fixed in position complete all as specified and directed.

Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed.

Supply and fix 6.00 mm thick mild steel, plain, black sheet in water tank platform and similar work ,cut to size, holes punched; including welding to steel framing with including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

Prepration new steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling of brick tiles single layer on roofs complete all as specified and directed.

Demolition of mud in roofs any thickness complete all as specified and directed.

(a) Material and Labour for cleaning the surface, remoive dust, dirt, loose particles and unsound substrate and providing 20mm thick cement screed in cement mortar (1:4) mixed with Dr Fixit/STP/Sika tonic liquid 200 gram/Bag over Dr Fixit bonding coat MPB .(b) Applying primer coat with solvent based bitumen primer @ 3.50 ltr/XSqm.(c) Align Dr Fixit/STP/Sika torch shield water proofing 3mm thick membrance using gas burner to heat substrate, pressing firmly from lower end to upper end with 100mm over lap.(d) Heat both overlap with round trowel to seal over lap excess compound smoothened,pressed into seam using hot trowel.(e) Seal edges well into grooves & protect with cement mortar 1:2.

Material and Labour for Providing cement concrete type B-0,1:2:4 (using 12.5mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028 , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Material and Labour for precast PCC plain tile 20mm thick and each tiles exc 0.02 sqm and n.exc 0.09 sqm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed pointed in CM 1:3 mixed with 5% crude oil by weight of cement complete all as specified and directed.

Material and Labour uprooting of plants (girth n.exc 15 cm of trunk to any height of plants) grown along the pipes or walls, chajjas, parapets and roof of bldgs and making good the surfaces as per existing surfaces and pouring acid not less than 100 ml for each plant in the root to avoid further growth as directed. Any other grass plants etc below 45 cm height shall be deemed to be removed from the premises complete all as specified and directed. Note: Work has to be executed up to (G + 3 storey) building

Removing building materials /old waste unwanted existing material of any description or any type etc. (other than spoil payable under items 03028 to 03031 in Section-3-Earthwork of SSR Part-I) to a distance of 5km or beyond the lead included in the rates, including loading, unloading and stacking at the destination in all respect as specified directed by Engr-in-charge

Supply and fix in repair 12mm thick toughened frosted/smoked glass door swing both side with self locking vertical spring fitted with necessary fixing arrangement with wall and stainless steel pivot complete including top rail in all respect as specified & directed. Make : Modiguard/ Saint Gobain/ Atul or equivalent.

B S R Enterprises

M/S SONU ENTERPRISES

sony engineering works