REPAIR/REWIRING OF INTERNAL ELECTRIFICATION AND OTHER ALLIED WORKS OF OTM AND MD ACCN ZONE A AT DHAR ROAD UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Taking down old unserviceable/deteriorated batten/PVC conduit point wiring aluminium/ copper from existing place i.e. light, fan, socket or power points complete with all unserviceable fittings such as switches, sockets, bell push, ceiling rose, pendants, holders, etc and making good all disturbed surfaces of wall, floor etc by means of cement mortar (1:3) or plaster of Paris and to match / finish new surface as per the existing surface either by using same colour distemper, putti or white / colour wash all as required and directed by Engineer-in-Charge.

M&L for concealed point wiring on wall and ceiling/roof with necessary fixing arrangements with PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade drawn in and including rigid non metallic white/ivory PVC conduit medium grade ISI marked not less than 20 mm dia with all conduit accessories/ fittings such as junction boxes, bends, tees, elbows etc including anodized MS sunken boxes made out of MS sheet of thickness not less than 1.6 mm with earth dolly and bakelite laminated sheet 3mm thick ISI marked for fixing of switches, sockets, fan regulators, wall mounting fittings, door bell & bulkhead etc with MS screws and cup washers including PVC-FRLS insulated and unsheathed copper multi-stranded conductor of size 1.5 Sqmm, 1100 volts grade for continuous earthing including cutting the chases and making good the surfaces by cement mortar (1:3) and for matching / finishing of new surfaces either by means of plaster of Paris/ Putti or distemper / colour wash with same existing colour of surfaces for one light/fan/bell point controlled by one switch 6/5 Amp one way single pole complete all as specified and directed.

All as per srl item No 2 above but for one 3 pin socket outlet 6/5 Amps controlled by one switch on the same board with other switches complete all as specified and directed.

All as per srl item No 2 above but for one 3 pin 6/5 Amp socket outlet controlled by one switch independent board complete all as specified and directed.

All as per srl item No 2 above but for one power point wiring with 2.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 1.5 Sqmm PVC-FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable as continuous earth lead complete all as specified and directed.

S&F switch piano flush type (ISI marked), single pole, one way 6 Amp, 240 Volts complete all as specified and directed. Make : Anchor/SSK/Havells/Cona

S&F switch piano flush type (ISI marked), single pole, one way 16/15 Amps, 240 Volts including complete all specified and directed. Make : Anchor/SSK/Havells/Cona

S&F socket outlet 3 pin, 6 Amp piano flush type complete all as specified and directed. Make : Anchor/SSK/Havells/Cona

S&F socket outlet, 2 in 1, 3/5 pin 6/16 Amp, piano flush type complete all as specified and directed. Make : Anchor/SSK/Havells/Cona

S&F bell push 5/6 Amps SP flush type complete all as specified and directed. Make : Anchor/SSK/Havells/Cona

S&F ceiling rose, surface bakelite, 65mm x 50mm, two to three terminals complete all as specified and directed. Make : Anchor/SSK/Havells/Cona

S&F for batten angle lamp holder insulated body with back plate suitable for batten fittings including complete all as specified and directed. Make : Anchor/SSK/Havells/Cona

S&F Ding dong sound door call bell electric AC 240 volt, 50 Hz ding dong type including taking down unserviceable complete all as specified and directed. Make : Anchor/SSK/Havells/Cona

S&F medium step type fan regulator, 240 Volts, AC, socket size medium, step ISI marked complete all as specified and directed. Make : Cona / Anchor/Havells/Crabtree

M&L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 6.0 Sqmm, 1100 Volts grade and one run of 4.00 Sqmm FR PVC insulated unsheathed as earth wire (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS-694 with latest amendments and drawn in PVC rigid conduit complete in all respect all as specified and directed. Make of wire : Havells/Finolex/Polycab. Note :- 1. Two run of single core cable with one run of continuous earth wire of copper conductor shall be measured and paid as one unit length. 2. PVC conduit shall be measured and paid for separately.

M&L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 4.0 Sqmm, 1100 Volts grade and one run of 2.5 Sqmm FR PVC insulated unsheathed as earth wire (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS-694 with latest amendments and drawn in PVC rigid conduit complete in all respect all as specified and directed. Make of wire : Havells/Finolex/Polycab. Note :- 1. Two run of single core cable with one run of continuous earth wire of copper conductor shall be measured and paid as one unit length. 2. PVC conduit shall be measured and paid for separately.

M&L for sub main wiring in replacement of worn out aluminium conductor wire with two run of FR PVC insulated unsheathed flexible copper conductor (Multistrands), single core of size 10.0 Sqmm, 1100 Volts grade and one run of 6.0 Sqmm FR PVC insulated unsheathed as earth wire (In Green Colour), flexible copper conductor (Multistrands) for continuous earthing conforming to IS-694 with latest amendments and drawn in PVC rigid conduit complete in all respect all as specified and directed. Make of wire : Havells/Finolex/Polycab. Note :- 1. Two run of single core cable with one run of continuous earth wire of copper conductor shall be measured and paid as one unit length. 2. PVC conduit shall be measured and paid for separately.

S&F in replacement non metallic rigid PVC conduit ISI marked, conforming to IS 9537, medium grade of size 20 mm dia including all fittings like bends, elbows, reducers, junction boxes, tees, bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including cutting & chasing required on brick wall or conc surfaces not exceeding 10 cm in girth for concealed conduit wiring and making good to disturbed surfaces with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed. Make of conduit : Plaza/Kalinga/AKG

S&F in replacement non metallic rigid PVC conduit ISI marked, conforming to IS 9537, medium grade of size 25 mm dia including all fittings like bends, elbows, reducers, junction boxes, tees, bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including cutting & chasing required on brick wall or conc surfaces not exceeding 10 cm in girth for concealed conduit wiring and making good to disturbed surfaces with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed. Make of conduit : Plaza/Kalinga/AKG

S&F in replacement non metallic rigid PVC conduit ISI marked, conforming to IS 9537, medium grade of size 32 mm dia including all fittings like bends, elbows, reducers, junction boxes, tees, bell mouth all fixing accessories such as coupler lock, nuts, saddles pipe hooks etc complete including cutting & chasing required on brick wall or conc surfaces not exceeding 10 cm in girth for concealed conduit wiring and making good to disturbed surfaces with cement mortar 1:3 and distemper / colour wash etc to match with existing surfaces including facing / finishing complete all as specified and directed. Make of conduit : Plaza/Kalinga/AKG

S&F service connection with twin core 10 Sqmm, 240 volts heavy duty un armoured PVC insulated, stranded aluminium conductor cable with GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete all as specified and directed. Make : Plaza /Polycab/Havells/finolex

S&F service connection with twin core 6 Sqmm, 240 volts heavy duty un armoured PVC insulated, stranded aluminium conductor cable with GI supporting wire of suitable size in replacement of old unseriveable conductor cable complete all as specified and directed. Make : Plaza /Polycab/Havells/finolex

S&F in replacement of old unserviceavle DB with SPN Distribution Box, double door of protection grade IP 43, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 4 way, conforming to IS 13032 & 8623 complete all as specified and directed. Make : legrand Cat No. 507610 or equivalent of Schneider (Electric)/L&T.

S&F in replacement of old unserviceable DB with SPN Distribution Box, double door of protection grade IP 43, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, conforming to IS 13032 & 8623 complete all as specified and directed. Make : legrand Cat No. 507601 or equivalent of Schneider (Electric)/L&T.

S&F in replacement of old unserviceable DB with SPN Distribution Box, double door of protection grade IP 43, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 12 way, conforming to IS 13032 & 8623 complete all as specified and directed. Make : legrand Cat No. 507602 or equivalent of Schneider (Electric)/L&T.

S&F in replacement of old unserviceable DB with TPN Distribution Box double door of protection grade IP 43, in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar of 8 way, conforming to IS 13032 & 8623 including chasing/cutting of wall and concealed and making good as per existing surfaces complete all as specified and directed. Make : legrand Cat No. 507782 or equivalent of Schneider (Electric)/L&T.

S&F in replacement of AC box with steel sheet enclosure in single pole and neutral fitted with two pin and earth plug and socket complete with one single pole MCB, 240 volts, 20 Amps , 'C' series of suitable rating complete all as specified and directed. Make : legrand Cat No. 507811 or equivalent of Schneider (Electric)/L&T.

Taking down old unserviceable MCB TPN/SPN/SP all as specified and directed.

S&F MCB four pole, 125 Amps, 415 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : legrand Cat No. 408705 or equivalent of Schneider (Electric)/L&T.

S&F MCB SPN, 32 Amps, 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : legrand Cat No. 408617 or equivalent of Schneider (Electric)/L&T.

S&F MCB SPN, 40 to 63 Amps, 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : legrand Cat No. 408618 to 408620 or equivalent of Schneider (Electric)/L&T.

S&F MCB SP, 06 to 32 Amps, 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : legrand Cat No. 408586 to 408595 or equivalent of Schneider (Electric)/L&T.

S&F MCB TPN, 63 Amps, 240 volts, AC, 10 KA breaking capacity 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : legrand Cat No. 408683 or equivalent of Schneider (Electric)/L&T.

S&F MCB TP, 63 Amps, 240 volts, AC , 10 KA breaking capacity 'C' Series, ISI marked and conforming to IS 8828/IEC 60898-1 complete all as specified and directed. Make : legrand Cat No. 408661 or equivalent of Schneider (Electric)/L&T.

S&F wall mounted LED batten 18/20 Watt with 01 No LED tube rod, extruded aluminium heat sink provided for efficient heat dissipation and integrated electronic driver including dismantling and taking down unsv FTL fitting T8 any type complete all as specified and directed. Make: Crompton Cat Part No LDL-20-CDL or equivalent in Philips/Wipro

S&F wall mounted Mirror light LED fitting, 10 Watt, 2 Feet long incl integrated electronic driver including dismantling and taking down unsv sketch fitting any type complete all as specified and directed. Make: Crompton Cat Part No LDL-10-CDL or equivalent in Philips/Wipro

S&F LED building security light 20 watt, 230V complete with all accessories including connecting up to ceiling rose with 0.5 sqmm three core copper flexible conductor cable, one GI medium grade suitable size bracket of total length 50 cm and fixed to wall with 2 Nos MS clamps and fastening incl dismantling and taking down unsv fitting any type all as specified and directed. Make-CROMPTON cat No LST-20-CDL-M or equivalent in Wipro/Philips

S&F Bulk head fitting 10 watt LED incl water proof, weather proof all as specified and directed in replacement of old unserviceable fitting . Make : Crompton cat No LBHP-10-CDL or equivalent in Philips/Wipro

S&F LED lamp 12 watt, CDL, B-22 cap, (Pin type), 230V, PF-0.95 (min) incl dismantling and taking out unsv CFL/LED bulb. Make : Philips/Wipro/ Havells/Crompton

S&F in replacement of Mirror optic fitting with recess mounted mirror optic LED luminaire fitting not less than 100 lumen/watt, 30 watt, dimension 600mm x 600mm fitting for grid type ceiling including control driver and other accessories complete all as specified and directed. Make : CROMPTON Cat No LCTLRNE-30-FO-CDL or equivalent in Philips/Wipro/Havells.

S&F in replacement of Mirror optic fitting with surface mounted mirror optic LED luminaire fitting not less than 100 lumen/watt, 30 watt, dimension 600mm x 600mm fitting for grid type ceiling including control driver and other accessories complete all as specified and directed. Make : CROMPTON Cat No LCTLSNE-30-FO-CDL OR equivalent in Philips/Wipro/Havells.

M&L for earthing as per IS:3043 with galvanized steel earth plate electrode 600 x 600 x 6.0 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level connected to galvanized iron wire 4 mm dia (8 SWG) as earthing lead protected by GI pipe medium grade 15 mm bore for protection of GI earth wire and 20 mm dia GI pipe medium grade for watering with alternate layers of charcoal /coke and salt including all accessories like nuts, bolts, reducers, nipples, wire mesh/screened funnel and making brick masonry finished chamber of internal size 300 mm x 300 mm x 300 mm with concrete base, covered with PCC cover which shall be embedded in the block masonry including excavation works, refilling, connected to main switch/MCB DB for feeding the electric supply to domestic quarters compete all as specified and as shown in electricall plateNo. 3 of SSR Part-I and testing of earth resistance as required. Note : Earthing lead/G.I.earth wire upto 7.5 metre length shall be deemed to be included in quoted unit rate. Beyond 7.5 metre, the same shall be measured and paid separately).

HIMALAYA ENTERPRISES

m/s shanti trading company

K S BUILDERS

GURU KRIPA ENTERPRISES