APART/NOCP/ROADS/GLP-03

Amount

Setting out Unit = 1 KM Reference Bench Mark and Bench Mark pillar as per MORD and Technical Specification Clause No. - 100 v) Typical benchmark as per drawing 200

Clearing and Grubbing road land (Clearing and grubbing road including uprooting rank vegetation grass, bushes, shrubs, sapling and trees girth up to 300mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to beused or auctioned up to lead of 1000m including removal and disposal of top organic soil not exceeding 150mm thickness

Construction of Embankment with approved materials obtained from borrow pits a lift upto 1.5m , transporting to site, spreading, grading to required slope and compecting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000m as Technical Specification Clause 301.5 (A) Private Land

Construction of subgrade and earthen shoulders with material from borrow pits with all lifts and leads, transporting to site, spreading, gradaing to required slope and compacting (including land compension of earth) as per drawing Technical Specifications Clause 303.1 (A) Private Land

Construction of granular subbase by providing well graded material, spreading in uniform layers with motor grader on prepared surface mixing by mix in place mathod with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density, complete as per Tecnical Specification Clause 401 (i) For grading it materials Drainage layer Top layer Total quantity

Providing, laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the intersticks of coarse aggreate, watering and compacting to the required dencity grading 2 as per Technical Specification Clause 405 . (A) By manual means

Providing, laying spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 Kn static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill up the intersticks of coarse aggreate, watering and compacting to the required dencity grading 3 as per Technical Specification Clause 405 . (A) By manual means

i) (a) Providing and laying interlocking concrete block pavements (M 40) having thickness 80mm as per technical specification clause 1504 (including of edge block / edge resitraint and carriage)

Providing and fixing of typical in formatory singboard with logo as per MORD Specification drawing. Three MS plates of 1.6mm thick, top and middle plate duely welded width MS flat iron 25mm X 5mm Size on back on edges. The lower plate will be welded with MS angle iron flam of 25mm X 25mm X 5mm. The angle iron frame of the lower most plate and flat iron frame of middile plate will be welded to 2 Nos. 75mm X 75mm of 12 SWG sheet tubes posts duely embdded in cement concrete M-15 grade blocks of 450mm X 450mm X 600mm, 600mm below ground level the top diamond plate will be welded to middle plate by 47mm X 47mm of 12 SWG steel plate tube. All M.S will be stove enameld on bothside. Lettering and printing arrows, boder will be painted with radimixed syinthetic enamel paint of superir quality in required shade and cloure. All sections of framed posts and steel tube will be painted with primer and two coats epoxy paint as per drawing Clause 1701 and Annexure on 1700.1

Traffic Signs A Retro - reflectorised Traffic Signs (1) Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting - 1.5mm thick supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of properly designed foundation with M - 15 grade cement concrete 450mm X 450mm X 600mm, 600mm below ground level as per approved drawings and Technical Specification cluase 801 (ii) 60cm equilateral tringle

Traffic Signs A Retro - reflectorised Traffic Signs (1) Providing and fixing of retro - reflectorised cautionary, mandatory and informatory sign as per IRC : 67 made of encapsulated lens type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting - 1.5mm thick supported on a mild steel angle iron post 75mm X 75mm X 6mm firmly fixed to the ground by means of properly designed foundation with M - 15 grade cement concrete 450mm X 450mm X 600mm, 600mm below ground level as per approved drawings and Technical Specification cluase 801 (iii) 600mm circular

Painting lines, dashes, arrows, etc on road in two coats on New Work Painting lines, dashes, arrows, etc. on roads in two coats on old work with ready mixed road marking paint conforming to IS : 164 on bituminous / concrete surface - including cleaning the surface of all dirt - dust and other foreign matter, demmarcation at dsite and traffic control as per drawing and technical specification clause . 1702

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC : 8 fixing in position including painting and printing etc. as per drawing and Technical Specification Clause : 1703 (iii) 200 m Stone (Precast)

Kilometre Stone Reinforced cement concrete M15 grade kilometre stone / local stone of standard design as per IRC : 8 fixing in position including painting and printing etc. as per drawing and Technical Specification Clause : 1703 (ii) Ordinary Kilometer Stone (Precast)

Providing and laying standred single cell precast box culvert (M25) along with RCC wing wall, CC curtain wall, floor protection with CC parapet wall etc. including necessary eartwork in excavation back filling transporation of precast box to the site of work, placing, positioning, jointing with mastic joint scaler , erection joining by grouting including reinforcement etc. complete as per Assam Standard Culverts (ASC) drawing and Technical Specification Clause 1600, 1700, MORD Specification (Measurement shall be made in number) (i) Assam Standard Culvert (ASC) 1M X 1M (rate as per analysis)

JAYANTI CONTRACTORS AND ENGINEERS LTD