Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Lowest Bid L1 rank is competitive and reasonable during Scrutiny amongst bidders | |
| 2 | L2₹23.6 L+₹1.7 L (7.78%)Rejected-AOC | L2 | Rejected-AOC Not lowest | |
| 3 | L3₹23.7 L+₹1.7 L (7.90%)Rejected-AOC 2ND 6 KEDIA HOUSE MA ROAD BYELANE 1 REHABARI GUWAHATI ASSAM 781008 | KAMRUP METRO | ASSAM | 781008 | L3 | Rejected-AOC Not lowest | |
| 4 | L4₹24.4 L+₹2.5 L (11.4%)Rejected-AOC | L4 | Rejected-AOC Not lowest | |
| 5 | L5₹24.8 L+₹2.8 L (12.8%)Rejected-AOC | L5 | Rejected-AOC Not lowest |
Tender Value
₹39.5 L
EMD Value
₹79,000
Closing Date
20 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (AF) BAMRAULI
CWE (AF) BAMRAULI
SPECIAL REPAIR TO ROAD AND ROAD FURNITURE AT NORTH CAMP AIR ENCLAVE PJ ENCLAVE AND SNCOs MESS AT AIRFORCE STATION BAMRAULI
2024_MES_661380_1
87375/E8
Open Tender
Civil Works - Roads
Item Rate
120 days
BAMRAULI PRAYAGRAJ
Class D Category a v and other criteria as per NIT and Tender Doc
8 documents required · 8 mandatory
₹500
GE(AF) BAMRAULI
₹79,000
Yes
1 Oct 2024
22 Jun 2024
22 Jul 2024
22 Jun 2024
20 Jul 2024
6 Jul 2024
22 Jun 2024 - 29 Jun 2024
Amount
M & L for Preparing of old black top surface by brushing with wire brushes for removing caked mud etc, sweeping with mechanical blower or brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed.
M & L for applying evenly a priming/ tack coat with bituminous primer of paving bitumen (VG-10) @ 5 Kg per ten Sqm over bituminous surface using pressure sprayer complete all as specified and directed.
Repair to pot holes not exceeding one sqm each including sweeping free from dust and mud water, scoring sunken surfaces in roads, paths etc cutting around edges to atleast 25mm in depth making good by applying tack coat @ 5kg per 10 sqm using paving bitumen grade VG-30, putting in and including premixed bituminous macadam, well rammed and sealed with binder 9.8 Kg per 10 Sqm using bitumen grade VG-30, binded with 0.09cum of stone chippings, 6.3mm size and again well rammed depth of pot holes exceeding 30 mm complete all as specified and as directed.
M&L for preparing unsurfaced WBM surface by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc complete all specified directed at site.
M&L applying evenly a priming/ tack coat with bituminous primer @ 10 kg per 10 sqm of paving bitumen grade VG-30 over WBM surface using pressure sprayer complete all specified directed at site.
Premix bituminous macadam (consolidated thickness 75 mm or less of Premix bituminous macadam ) using crushed stone aggregate with binder (paving bitumen VG- 30) with 4% by weight of total mix laid with hydrostatic mechanical paver, rolled and compacted to required gradient and camber to smooth uniform surface with 8 to 10 tonne tendom vibratory road rooler to achieved desired compaction all as specified in particular specifications. Note:- (i) The quoted rate shall be worked out on the basis of binder contents (bitumen VG-30) of 4% by weight of total mix. (ii) Work shall be executed as per design mix as approved by GE and less bitumen shall be deducted from the quoted rate.
M & L for Providing Bituminous premix asphaltic semi dense concrete 30 mm consolidated thickness with minimum 5.50% binder content by weight of total mix, using paving bitumen (VG -30), laid with hydrostatic mechanical paver, rolled and compacted to required gradient and camber to smooth uniform surface with 8 to 10 tonne tendom vibratory road rooler to achieved desired compaction all as specified in particular specifications. Note :- (i) Work shall be executed as per design mix as approved by GE. (ii) The binder content specified is minimum. Any variation in binder content during design mix at site on plus side shall be borne by the contractor without any extra cost to the Government. (iii) Cement shall be used as filler at a minimum of 2% by weight of total mix. In the event of variation in the mix design in the percentage of filler content on plus side. nothing extra shall be paid.
M & L for preparing the new bituminous surfaces by removing or cleaning of all dirt,scales, oil grease and foreign materials etc and providing 2.5 mm (minimum) thick and width as per required hot thermoplastic paint (Retro reflective type)for road marking in white/yellow shade by fully automatic thermoplastic paint applicator machine,fitted with profile shoe,gun , beads dispenser, propane tank,heaters and profile shoe,heaterdriven by skilled operator on road surfaces complete all as specified and directed. Note:-(i) Road marking work shall be carried out accordance with manufacture's instructions and as specified in particular specification. (ii) Refer MORTH specification of para 803.4.2.1 and 800.4.2.2 on bituminous surface/surfaces in white colour or yellow colour and super imposed with glass beads confirming to BS 6088 and MORTH specification para 803.4.3.3
M & L Moorum filling in road side berms laid in layers not exceeding 15 cm thick, rolled and consolidated to required gradient and camber complete all as specified and as directed.
M & L for 75mm thick stone aggrage (compacted thickness) for WBM, with coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.
S & F in repair Traffic Mirror (Convex) 800mm dia, made out of ABS or Fibre or Plastic body fixed in position with mild steel post of 75mm dia with 6mm thick mild steel base plate 100mm dia , 1.0m high embeded in PCC 1:2:4 type B-1 using 20mm graded stone aggregate in block of size 300mmx300mmx600 mm duly anchored in ground on various location and after finishing with plaster 10mm thick in CM 1:6 and three coat of white wash including preparation of surface and on mild steel portion, two coat of synthetic enamel paint over a coat of red oxide primer to exposed surfaces with imported outdoor Polycarbonate convex mirror of 800mm diameter with 130 degree plus actual viewing angle equipped with adjusting swivel and mounting bracket for infinite adjustment.complete all as specified and as directed. Make : Dark eye cat part No CM/04(I) or equivalent make as per appendix B.
Removing old road sign boards any type and size and taking on credit with provision of new Informatory Road sign Boards of size as directed by the GE made of 3 mm thick aluminium sheet with HIGH INTENSITY PRISMSTIC RETRO REFLECTIVE SHEETING on both sides of colour and letters of appropriate size as directed by the Engr-in-Charge as per IRC specifications, and as per type-III of ASTMD 4956-01 and IRC-67-2001 in Silver white letters and signages fixed on SS Pipe of 75 mm dia (02 Nos) and base plate (150 x 150 x 3.15) mm at the bottom with overall height upto 3000 mm fixed on pedestal of size (300 300 x 600) mm of PCC 1:2:4 type B1 (using 20 mm graded stone aggregates) duly anchored in ground on various locations complete as per manufacturer's instructions and all as specified and directed by the Engr-in-Charge. Note: (a) Contractor shall quote his rate by considering the description of item as above. No other claim whatsoever on account of this will be allowed. (b) SS pipe including nuts and bolts will be measured and paid separately.
Supply and fixing stainless steel (Grade 304) pipes and columns made of hollow tubes, channels, plates etc including welding, grinding, buffing, polishing and making curvature (where ever required) and fittings the same with stainless steel nuts and bolts complete including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size , on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed
Dismantling wrought iron, or mild steel / stainless steel work of any description not otherwise provided complete all as specified as directed.
S & F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.
M & L for preparing new or previously untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M & L for PCC (1:2:4) type B-1 (20mm stone graded aggregate) Cement concrete , in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed etc complete all as specified as directed.
YOU SEE CONSTRUCTION (BID ID -3060153)
Aditi Construction Company (BID ID -3060534)
M/S Garg Sons (BID ID -3060745)
DKS ENGINEERING WORKS (BID ID -3068572)
A S ENTERPRISES (BID ID -3058380)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .