Periodical services of Marketing Cell, Pension cell office and perimeter wall at W-II at Gun and Shell Factory, Cossipore, Kolkata - 700002.

Amount

Demoliation of brick work, PCC, RCC work built in cement morter at any place and heigh.

Dismantling wrought iron or mild steel work of any description like rolling shutter etc. at any place and height and place it from site to designated place . All complete in all respect.

Preparation of old ceiling surface to remove all accumulated dust, dirt, oil before application of white washing and M&L for applying two coats of white wash with blue and approved adhesive as required on ceiling. .

Preparation of old wall surface to remove all accumulated dust, dirt, oil before application of colour washing and M&L for applying two coats of colour wash with pigment and approved adhesive as required on wall.

Preparation of old wooden surfaces by sand papering so as to remove all accumulated dust,dirt,oil etc before application of paint and M&L for applying of one coat synthetic enamel paint on wooden surfaces of any description. (Brand - Asian paints, Berger Paints, ICI or it's equivalent)

Preparation of old iron surfaces of any description before application of paint and M&L for applying one coat of synthetic enamel paint on iron surfaces of any description. (Brand - Asian paints, Berger Paints, ICI or it's equivalent).

Complete removal of exisitng treatment and priming plastered surface with alkali resistance priming paint and applying two coats of oil emulsion distemper.

Preparation of wall surfaces to complete removal of existing surface and M & L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ litres and UV resistance as per IS 15489:2004, alkali and fungal resistance , dirt resistance exterior paint of required shed (company depot tinted) with silikon additives @ 1.43 litres/ 10 sq.m. over and including priming coat of exterior primer applied @ 0.90 litres/10 sq.m. over new surface. all complete in all respect. (Brand - Asian paints, Berger Paints, ICI or it's equivalent)

M & L for Brick work with sub class brick-B in cement morter 1:6).Complete in all respect .(Cement Brand: ACC/ Ambuja/ Ultratech or it's equivalents )

S & F of Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured

S & F of Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded.

S & F of Sheet glass, ordinary quality 3mm thk. and glazing with oil putty in square n exc 0.5 sq. m in each pane.

S & F of 1st class soft wood 30mm thk. Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats.

S & F of 125 mm Butt hinges, medium weight, cold rolled mild steel, and fixed

S & F of 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed

Dismantling of plain /Corrugated / semicorrugated steel sheeting any gauge and thickness, in roof covering.

M&L for doing MS framework with angle, channel, joist, tee section [Fe 410 - W (Gde-E-250) quality-A ] as per requirement including cutting, bending, welding fixed with angle cleats or other connecting plates at any place and height.

S&F of pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet ( 0.50 mm thk). of any colour having tensile strength of 550 Mpa as in roof covering , fixed with self taping screws/bolts & nuts, neoprene and limpet washers with 150 mm end laps.

M & L for 3mm thick wall care putty on wall.

Providing, mixing and applying epoxy bonding adhesive having coverage 2.20 sq.m. / kg of of approved make on chipped portion of RCC surface as per specification.

Taking down plastering with cement morter and M & L for cement plaster 10 mm thick with 1:4 cement morter over concrete / brick surface.

Taking down plastering with cement morter and M&L for 15 mm thk. 1:4 ratio new cement plaster at any place and height. (Brand : Ambuja, ACC, Ultratech or equivalent).

M&L for doing PCC with 12.50 mm stone chips @ 1:2:4 nominal mix. At any place and height (Brand : Ambuja, ACC, Ultratech or equivalent).

Preparation of new surface and M & L for applying two coats of synthetic enamel paint over one coat red oxide primer over new iron surface. (Brand : Asian Paints, Berger Paints, Dulux or its equivalent).

Preparation of new surface and M & L for applying two coats of synthetic enamel paint over one coat pink primer over new wooden surface. (Brand : Asian Paints, Berger Paints, Dulux or its equivalent).

Removing the demolished building material outside the factory premisses.

CHARIOT CONSTRUCTION (BID ID -858761)

M/S. BASU ENTERPRISE (BID ID -857165)

J.K.CONSTRUCTION (BID ID -858584)

Runjen Construction (BID ID -858799)

T K MAZUMDER (BID ID -858785)