Beautification of ITI Chowk, ward No.11, Municipal Corporation, Karnal (Only for L/C Societies)

Recovery of useable bricks from site during demolishing work complete in all respect.

Supply of decorative post top fixture Vak make `DOCK` having 405mm width and height of fixture is 313mm with 40W LED, which is suitable for 60mm mounting, Fitting made with corrosion resistant Dia cast aluminum, rubber gaskets are also provided for dust and water protection polycarbonates (pc) diffuser is used. Polycarbonates(pc) dual diffuser it used for anty gearing and evenness of light distribution. LED should be mounted on MC PCB Decorative casting parts are powder coated. 10kv SPD to be used. Supply of decorative Gl STEP pole (without foundation bolt total height of the pole is 3mtr, Lower part of the pole having 114mm Dia, and height is 1000mm. Upper part of the pole having 60mm Dia and height is 2000mm. DECORATIVE CASTING PART ARE Powder coated square base plate having 250mmX250mm with 10mm thickness. Out 4-way connector 40amp suitable for 105a mm wire with 6-amp ngle pole MCB.

Three Phase CCMS Panels with 5 Year Warrenty (Rate taken DULB vide memo no. 45/HR/EC/E-5/2022-23/20210 Dated 16.01.2024).

(DSR No. 2.05.01) Supplying and erecting decorative gate/garden light fitting with approximately 200 mm dia. glass bowl. suitable for LED lamp up to 12 W, complete with suitable lamp holder, LED lamp. weatherproof accessories, mounting arrangement, connections, testing and commissioning, as required and as directed by Engineer-in-Charge.

(DSR No. 2.04.20) Supplying and erecting integrated LED bollard, cylindrical/cubical shaped, approximately 800 mm high, 8 W, lP65, lK 10, extrusion aluminum housing with polycarbonate diffuser, minimum system output 800 lumens, minimum efficacy 100 lm/W, CRl )80, CCT up to 6500 K, operating voltage 140-240 V, surge protection 2 kV, including driver, mounting accessories, connections, testing and commissioning complete.

(DSR No. 2.04.22) Supplying and erecting integrated LED round burial light, 6 W, IP6S, lKl0, pressure dix-cast aluminum housing, toughened/impact-resistant glass, minimum system output 500 lumens, minimum efficacy 85 Im/W, CRI )80, CCT up to 6500 K, operating voltage 100-240 V, surge protection 4 kV, including driver, recess/mounting arrangement, connection, testing and commissioning complete.

(DSR No. 2.04.12) Supplying and erecting integrated LED flood light fitting Max. 30 W IP65 and IK07 class having pressure die-cast aluminium housing,having system lumens output of min.3000 lumnes,min efficay of 100 lumen/W ,CRI)70,CCT upto 6500K,THDO 90, operating range of 140-270 V,inbuilt surge protection of 4 kV. Life class of 50,000 Hrs. at 1.70B50,including driver with U shaped bracket with 3 Years warranty as per specification No.FGODF/FLS2.

(DSR No. 2.04.23) Supplying and erecting concealed type LED foot/step light, maximum 5W, IP67, IK10 rated pressure die-cast housing, minimum system output 500 Lumens, minimum efficacy 100 1m/W, CCT up to 5000K, including driver and necessary recess/mounting arrangement, connections, testing and commissioning complete

(DSR No (EandM).20.18)Supplying, Installation ,Testing and Commissioning of three phase open well ISI Marked submersible pumpset of 1.5 HP capacity suitable for operation on 415 V (-10%) 3 phase AC supply compatiable for opertions on dynamic frequency/speed having IP 68 Protection including providing required no`s of heavy duty M.S clamps made of flat iron and suitable size top cover made of suitable thick MS sheet as required and making of flexible IP 68 cable connections etc.complete of suitable head and discharge etc. complete as required.

(DSR No (EandM).20.3) Supplying, Installation, Testing and Commissioning of 40mm dia SS Difuser Nozzles in SS 304 Gr to produce water effect etc.complete as required.