Special repair works to the PTB building at Old CPO Campus in Madurai City

Amount

1.5) Earth work excavation for Open foundation (excluding refilling) a. 0 to 2 mt.

b. 2 to 3 mt.

52) Supplying, laying, fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 including the cost of suitable PVC/GI/GM specials a. 32 mm dia

b. 25 mm dia

Electrical arrangements 69) Supplying and fixing of 15 Amps 3 pin Power plug socket

74) Charges for assembling and fixing of ceiling "Fan"

112) Supplying and fixing of Exhaust Fan 300 mm dia

Annexure 2.1.3) Supplying and filling in foundation and basement with Crushed stone sand

3.1.1) C.C.1:5:10 using 40mm size HBSJ for Foundation & Basement using crushed stone sand

3.2.1) P.C.C. 1:2:4 using 20mm size HBSJ for Foundation & Basement and other similar works using crushed stone sand with Admixture

4.4.1) Standardized Concrete mix M20 Grade using crushed stone sand with Admixture a. In Foundation and basement

9.7.1) Brick work in C.M. 1:6 using fly ash bricks of size 23 x 11 x 7 cm using crushed stone sand with admixture a. In Ground Floor

c. In Second Floor

10.7.1) Brick partition wall in C.M. 1:4 using fly ash bricks of size 23x11x7 cm 110 mm tk (B.P.) using crushed stone sand with admixture a. In Foundation and Basement

b. In Ground Floor

18.1) Formwork using M.S.Sheet b. Plain surfaces such as Roof slab, floor slab, Beams, lintels, lofts, sill slab, staircase, portico slab and other similar works

23.2.1) Supplying and fixing of 4mm thick pin headed glass panels with Aluminium beedings

28.1) Finishing the top of flooring in C.M. 1:4, 20mm thick. using crushed stone sand with Admixture

29.8.1) Supplying and fixing of Glazed tiles using Grout (Tile Joint Filler) using crushed stone sand

29.9.1) Supplying and laying of Floor ceramic tiles (Anti-skid) using Grout (Tile Joint Filler). using crushed stone sand

32.1.1) Pressed tiles (23cmx23cmx20mm thick) mixed with water proofing compound @ 2% by weight of cement using crushed stone sand

33.1) Plastering in C.M. 1:5, 12 mm tk. using crushed stone sand with Admixture

35.2) Spl. Ceiling plastering in C.M 1:3, 10 mm tk. using crushed stone sand with Admixture

37.2) White washing two coats for old ceiling surfaces

38.4.3) Painting the old walls with two coats of Oil Bound Distemper including thorough scrapping

40.1) Two coats of painting over the old wood work including Removing old paint from doors, windows & wood works by manual labour

41.1) Two coats of painting over the old iron work and other similar works including scrapping and Removing old paint from structural steel by manual labour

43.1) Supplying, Fabricating and fixing of Mild steel / RTS grills (without cement slurry wash) reinforcement for all sizes of rods

44.6) Supplying and fixing of PVC SWR 110 mm dia with ISI mark type-A for rain water down fall pipe

51.1) Supplying and fixing of HDPE water tank 1000 lit capacity with ISI mark

52.4) Supplying laying fixing and jointing the following dia PVC pipes as per ASTM D-1785 of schedule 40 threaded PVC water supply ASTM pipe (fully consealed in walls) with necessary PVC/GI/GM specials c. 20mm dia

53.4) Supplying and fixing of CI Manhole cover of size 60 x 60cm (50kg weight)

53.5) Supplying and fixing of Wash hand basin (White without Pedastal type) of size 550 mm x 400 mm (22"x16")

54.1.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (long body)

54.2.1) Supplying and fixing of 15mm dia Half turn Brass core C.P. Tap (Short body)

56.3.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - in G.F. using crushed stone sand

56.4.2) Supplying and fixing of Indian Water closet white glazed (Oriya type) of size 580 x 440mm with PVC SWR Grade 'P' or 'S' trap - Other than G.F. using crushed stone sand

57.2) Supplying and fixing of EWC (White) 500mm with PVC SWR grade "P" or "S" Trap

60.1) Supplying and fixing of PVC Nahani trap (4way/2way)

64.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990. (Open wiring) a. Light point with ceiling rose

b. Light point without ceiling rose

66.1.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for Staircase Light Point.(Open wiring)

68.2.2) Wiring with 1.5 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark confirming IS: 694:1990 for 5 amps 5 pin plug socket point at Convenient Places.(Open wiring)

75.1.2) Supplying and delivery of fan with electronic dimmer with ISI mark a) 48" (1200mm) sweep

84.4.1) Run off 4 Wires of 4 sqmm PVC insulated single core multi strand fire retardant flexible copper cable with ISI mark (Open wiring)

100) Supplying and fixing of 9 watts LED Bulb

102) Supplying and fixing of 4'18 watts crystal LED tube light

103.1) Supplying and fixing of water tight Bulk Head fitting with guard suitable for 15 watts LED bulb

104.1) Supplying and fixing of 15 watts LED bulb for bulk head fittings

119) Supplying and delivery of 5 HP submersible pumpset suitable for borewell

119.1) Supplying and delivery of 3 HP open well submersible pumpset suitable for installation in Sump Duty - 50 lpm x 25 m

120) Labour charges for erection of submersible pumpset in borewell / openwell upto 5 HP

121.1) Supplying and fixing of 3 Phase Panel Board including labour charges

122) Supplying and fixing of following dia of the GI, CI & GM specials a) 50mm dia CI Foot valve with stainer

b) 65 mm dia GI Elbow

c) 50mm dia GI Elbow

d) 50mm dia GI Union

e) 50mm dia GI Tee

f) 50mm dia GI Hex Nipple

g) 50mm dia GM Non Return valve

h) 50mm dia GI Coupling

i) 50mm dia GM Gate valve (Heavy duty)

j) 32mm dia GI Elbow

k) 32mm dia GI Coupling

l) 32mm dia GI Union

m) 32mm dia GM Gate valve

123) Supplying and Delivery of PVC insulated and sheathed 3 core 4 sq.mm flat type copper cable for submersible pumpset

124) Supplying and delivery of following dia GI pipes 'B' class in position a) 65mm dia GI pipe

b) 50mm dia GI pipe

c) 25mm dia GI pipe

125) Supplying and delivery of following dia UPVC Pipe a) 50mm dia UPVC pipe

b) 32mm dia UPVC pipe

125.1) Labour charges for laying of following dia UPVC pipe below ground level

126.1) Supplying and fixing of following dia M.S. Clamp set a) 40 mm dia MS clamp set

127) Supplying and delivery of required dia Nylon rope for tieing of submersible motor pump

132.3) Drilling of 6" dia (150mm) vertical bores in hard rock area a) Upto 150 m below ground level

b) Upto 151m to 180m

c) Upto 181 m to 210m

d) Upto 211 m to 240m

132.4) Drilling of 4 1/2" diameter borewell by using Calyx Drill including transporting charges and insertion of casing pipes (excluding cost of casing pipe) for plain area

133) Supplying and fixing of following dia PVC casing pipe as per IS 12818/2010 a) 150mm dia PVC Casing Pipe

134) Supplying and fixing of 160mm dia PVC end cap suitable for covering the 150mm dia borewell casing pipe

134.2) Supplying of following dia UPVC column pipe for Borewell a) 32mm dia UPVC column pipe

134.3) Supplying and fixing of PVC mould CI Steps for Sump

378.2) Supplying and fixing of Vitrified tiles (Ivory) in CM 1:3, 20mm tk using crushed stone sand

796.1) Two coat of Plastic emulsion paint with primer for old wall surfaces including thorough scrapping

800.1) Dismantling, clearing away and carefully stacking materials useful for re-use of Reinforcement cement concrete by manual / by using deploying machineries

800.2.1) Dismantling, clearing away and carefully stacking materials useful for re-use of One Course of Pressed Tile Roof finish in cement mortar

800.4.1) Dismantling clearing away and carefully stacking materials useful for reuse of existing damaged compound wall brick masonry in cement mortar walls a) Under 3.00m height

800.5) Dismantling and clearing away of Floor finish and dadooing walls in cement mortar with Mosaic tiles / Glazed Tiles / Clay Tiles / Cuddapah slabs

U.Murugesan