C.o stage at Nehru Madan at Theog Distt. Shimla H P

Amount

Excavation in soil in Hilly area by manual means including cutting and trimming of side slopes and disposing of excavated earth with a lift upto 1.5 mtr. And a lead upto 50 mtr. As per technical specification clause 1603.1 including in all leads and lifts as per direction of Engineer-in-charge.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level including carriage of materials in all leads and lifts as per the direction of the engineer-in-Charge 1:4:8 (1 Cement : 4 coarse sand) : 8 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:2:4 (1 cement : 2 coarse sand) : 4 graded stone aggregate 20 mm nominal size) complete including carriage of material in all leads and lifts as per the direction of the engineer-in-Charge.

Providing, hoisting and fixing above plinth level upto floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering shuttering but, excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size). In ahelves.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm. so as to give a fair finish including centring, shuttering, and propping etc. with wooden attens and ballies, height of propping and centring below supporting floor to celling not exceeding 4 mtrs. And removal of the same for insitu-reinforced concrete & plain concrete work in shelves.

Providing, hoisting and fixing above plinth level upto floor five level precast reinforced cement concrete in mouldings as in cornices, windows sills etc. including setting in cement mortar 1:3 (1 cement : 3 coarse sand) cost of required centering shuttering but, excluding the cost of reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand :3 graded stone aggregate 20mm nominal size).

Providing mild steel/Tor steel reinforcement for RCC work including bending binding and placing in position complete upto floor two level including all leads and lifts as per direction of the Engineer-in-charge. Mild or tor steel.

Stone masonry stone in cement mortar 1:6 ( 1 cement : 6 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in charge.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and size in : in cement mortar 1:6 (1 cement : 6 coarse sand ) complete including carriage of material in all leads and lifts as per direction of the Engineer in charge.

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:4 (1 cement : 4 coarse sand) complete including carriage of material in all leads and lifts as per direction of the Engineer in charge.

Boulder filling tightly hand packed under floor including watering, ramming, condolidating etc. complete including carriage of material in all lead and lifts as per direction of the Engineer in charge.

Baroda green Marble work ( table rubbed and polished) in steps, jambs, walls, pillars and other plain work in cement mortar 1:2 (1 white cement : 2 marble dust) with an admixture of pigment to match the marble shade.

Providing and laying vitrified tiles in different size ( thickness to be specified by manufacture), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete.

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete.

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing and fixing 19mm thick commercial board water proof shutter for cup boards including fixing with nickel plated piano hinges for cup board including fixing with nicked plated piano hinges with screws etc. complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing 6mm thick ply wood lining with butt jointing and nails ( frame work and cover fillets to be measured and paid for separately complete including carriage of material in all leads and lifts as per direction of the Engineer in Charge.

Providing and fixing 19mm thick commercial board water proof in shelves, lining, box, for cup board with butt joints fixed with butt joints fixed with nails and screws etc. complete including carriage of material in all leads and lifts as per direction of the engineer in charge.

Providing and fixing 1.00mm thick coloured or plain lamination sheet ( sunmica) on boards/ply wood sheets with approved adhesive and nails etc.

Providing and fixing square edges cover fillets ( beading) 19mmx6mm section i/c mitring at junctions with wood screws etc. complete:

Providing and fixing brass handles, ISI marked, anodized transparent or dyed to required colour or shade, with necessary screws etc. complete:

Providing and fixing brass ball catcher of approved quality including necessary screws etc. complete.

Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete

Providing and fixing 0.60mm thick prepainted steel sheet tata durashine of approved brand and shade and design in roofing with hot dipped metallic zinc coated sheet with top coated sheet with top coat of reqular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5 microns primer coating including fixing with G.I.self drilling screws of required sizes/ prepainted iron J or L hooks, bolts and nuts 6mm dia meter with prepainted limpet and rubber washers complete upto floor all level with all accesoriees :- 0.60 ( zero point sixty millimeter) thick sheet including carriage of material within all leads and lifts as per direction of Engineer-in-charge.

Providing and fixing ridges or hips 60cm overall with 0.45mm thick prepainted steel sheet tata Durashine of approved brand, shade and design in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating + back coat of polyster of 5 microns over 5 microns primer coating inciuding fixing with G.I self drilling screws of required size / prepainted iron J or L hooks bolts and nuts 6mm dia and prepainted G.I limpet and bitumen washers complete upto floor all level with all accessories as required as per the direction of engineer in Charge of material within all leads and lifts as per direction of engineer-in-charge.

Providing and fixing vally 90cm overall 0.45mm thick prepainted steel tata Durashine of approved brand, shade and design in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5 microns over 5 microns primer coating i/c fixing with G.I. self drilling screws of required size/ prepainted iron J or L hooks bolts and nuts 6mm dia with prepainted G.i. limpet and bitumen washer complete with all accessories as re

Providing and fixing MS BP sheet 2.00mm thick in eves board/ facial/ soffits/ ceiling including cutting fixing and welding to sheet roof members and applying a coat of red lead primer complete as per the instruction of engineer-in-charge ( base members of steel work shall be measured and paid separately).

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint in trusses and trussed purlins in

In grating framed guard bars, ladders, railing, brackets and similar works.

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, of steel shutter openable of Z – sections style F-78 of T-Section for shash bar of 25x25x3mm in size jointed and mixed and welded together making one shutter and angle iron 25x25x3mjmwelded on existing window frame of ISI marked channel and providing and fixing glass panes 3.5 mm thick with glazing clips and special metal sash patty of approved make openable shutter with hing also applying a coat of red lead paint fixed steel window and ventilators including carriage of material within all lead and lifts as per direction of engineer in charge. Fixed Shutter

15mm cement plaster in single coat on the rough side of brick/ concrete / stone wall for interior/ exterior plastering upto all floor level including arrises, internal rounded angles, chamfers and/ or rounded angles not exceeding 30cm in girth and finished even and sand opapered smooth in cement mortar 1:6 (1 cement :6 sand ) with complete scaffolding works upto all hights including carriage of material within all lead and lifts as per direction of Engineer in charge.

15mm Cement plaster in single coat on the rough side of brick/ concrete/stone walls for interior plastering upto floor two level including arrises,internal rounded angles,chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth, Cement Mortar 1:6 (1Cement:6 Sand) with complete scaffolding works upto all heights including carriage of material within leads and lifts as per direction of engineer in charge.

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture including carriage of material and as per the direction of the Engineer in charge.

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. including carriage of material and as per the direction of the Engineer in charge. Two coats

Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour etc. complete

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With ready mixed pink or grey primer on wood work (hard and soft wood)

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new works over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

Providing and fixing PVC floor trap of self cleaning design including fixing with approved adhesive cost of cutting and making good the wall and floor etc. complete. 110mmx90mm.

Providing and fixing PTMT liquid soap container 109 mm wide, 125mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fitting of approved quality and colour weighing not less than 105 gms.

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing Polyethelene-Aluminium- Polyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer-incharge.

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end)

Providing and fixing uplasticised PVC connection pipe with brass unions 45cm long 20mm bore

Constructing masonry Chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size ), i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm nominal bore

Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge.

Providing and fixing PVC water storage tank of ISI : 12701 marked G.I inlet and outlet connection , 15mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting upto all heights above ground level:- 1000 ltr. Caqpacity.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings.

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

Providing and fixing 100 mm sand cast Iron grating for gully trap.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P.brass screws and washers complete.

Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.

Providing and fixing toilet paper holder

Providing and fixing soil, waste and vent pipes : 100 mm dia

75mm dia

Providing and filling the joints with spun yarn, cement slurry and cement mortar 1:2 ( 1 cement : 2 fine sand) in S.C.I./ C.I. Pipes : 75mm dia

Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. 100 mm dia

75mm dia

Providing and fixing plain bend of required degree including in all leads and lifts as per direction of Engineer-in-charge. 100mm

75 mm dia

Providing and fixing double equal plain junction of required degree. 100x100x100x100 mm

Providing and fixing collar : 100 mm

Providing lead caulked joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of diameter 100 mm.

Tisha Mehta

Sunil Khachi

Akhil Sharma

Arun Hetta

VIRENDER KUMAR