Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.5 LAccepted-AOC 30 H SELBOURNE ROAD NEAR S M HOSPITAL UDHAGAMANDALAM THE NILGIRIS TAMIL NADU 643 001 | UDHAGAMANDALAM | THE NILGIRIS | TAMIL NADU | 643001 | L1 | Accepted-AOC BEING L1 BIDDER | |
| 2 | L2₹24.7 L+₹3.2 L (15.1%)Rejected-Finance CHENNAI | L2 | Rejected-Finance BEING NOT L1 BIDDER | |
| 3 | L3₹25.9 L+₹4.5 L (21.1%)Rejected-Finance 20 1 CHANDRA NIVAS APPLEBY ROAD WELLINGTON COONOOR NILGIRIS 643 232 | COONOOR | NILGIRIS | TAMIL NADU | 643232 | L3 | Rejected-Finance BEING NOT L1 BIDDER |
Tender Value
₹24.5 L
EMD Value
₹49,000
Closing Date
13 Feb 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE DSSC WELLINGTON
GE DSSC WELLINGTON BARRACKS-POST, WELLINGTON, THE NILGIRIS, TAMIL NADU,PIN-643231
ADDN ALTN TO FOUR SYNDICATE ROOMS AT BLDG NO 58 AT DSSC WELLINGTON
2023_MES_575799_1
8294/E8
Open Tender
Civil Works
Item Rate
60 days
WELLINGTON
PLEASE REFER TENDER DOCUMENTS AND NIT
8 documents required · 8 mandatory
₹500
GE DSSC WELLINGTON
₹49,000
Yes
25 Mar 2023
18 Jan 2023
15 Feb 2023
18 Jan 2023
13 Feb 2023
1 Feb 2023
Amount
B/R PORTION Dismantling wooden boarding of any size & thickness fixed on wall on wooden battens with screws and removing from site all as specified and directed.
Demolition of unreinforced plain cement concrete in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing debris from site all as specified and directed.
Demolition of floor hearth or wall tiling stone slab and tiles laid bedded and pointed in any mortar of any description or thickness in floor, approns etc all as specified and directed.
Taking door frame with shutter (without taking off shutters from the frames) n. exc. 1.5 Sqm each includiing forming jambs, etc. to openings in cement mortar 1:4 including cutting toothing and properly bonding into old work also facing,jointing and pointing to match existing work complete all as specified and directed.
Taking door Chowkhats or frames with shutter (without taking off shutters from the frames) exc 1.5 sq. m but n exc 4 sq. m each includiing forming jambs, etc. to openings in cement mortar 1:4 including cutting toothing and properly bonding into old work also facing,jointing and pointing to match existing work complete all as specified and directed.
Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets and suspension grid complete all as specified and directed.
Dismantling mangalore pattern tiles laid dry in roofing all as specified and directed.
Dismantling battens for tiles, shingles etc of any size including tilting fillets all as specified and directed.
Dismantling boarding, any description, fixed in any position with nails all as specified and directed.
M&L for providing and injecting chemical emulsion for Post construction Antitermite treatment along the Internal/external walls below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed.
M & L for roof tiles mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.
Fixing only roof tiles mangalore pattern, interlocking at side joints, laid dry complete all as specified and directed.
M & L for Ridge or hip tiles to suit Mangalore pattern of roofing tiles, bedded and jointed in lime mortar 1:3 or cement mortar 1:6 all as specified and directed.
All as per item No. 15 here-in-before but exept tiles all as specified and directed.
M&L for 2nd class hardwood tile battens clean sawn witrh sectional area exc 15 sqcm but n exc 25 sqcm at 30 cm centres complete all as specified and directed.
All as per item No. 15 here-in-before but except battens all as specified and directed.
M & L for preparation and applying one coat of tile guard paint over mangalore pattern tiles complete all as specified and directed.
M&L for Steel work in tubular trusses, sections including special shaped washer, plates, angle cleats etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed.
M & L for rolled mild steel in Joinst, channel, angle, MS flats or tee sections, fixed independently, without connecting plates, etc (cut to ordinary length i.e. within 20mm of the length indicated) complete, all directed and specified. (Fe-290 Gde E-165) all as specified and directed.
S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed.
M & L for 20mm thick 2nd class hard wood boarding, supplied and fixed with nails in any situation (except flooring and skirting) complete all as specified and directed.
Fixing only 20mm thick 2nd class hard wood boarding, supplied and fixed with nails in any situation (except flooring and skirting) complete all as specified and directed.
M&L for Preparation of old painted wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.
M&L for Preparation of new/previously untreated wooden surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
M&L for Plain fillets 2nd class hardwwod exc 6 sqcm but n.exc 25 sqcm. square, rectangular or triangular in section, clean sawn, secured with wooden rawl plugs and screws (plugging to wall) all as specified and directed.
M&L for Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with Creosote Oil all as specified and directed
M & L for 8mm thick Pre-Engineered laminated wood for wall panelling planks of any colour and desigen (as approved by GE) fixed over and including to 8/9mm thick plywood fixed on wall or floor all as per manufacturers instructins and as directed. Make : Florz, Sapphire, Terazzo or equivalant all as specified and directed.
M & L for pre-engineered hardwood for Cornices/beading/nosing/moulding as used in pre-engineered wall panelling etc of cross sectional area n.exc 25 Sq Cm as as specified and directed.
M&L for plain cement concrete 75mm thick 1:3:6 (type C-1), (using 20mm graded stone aggregates) as in subbase complete all as specified and directed.
M&L for vitrified double charged/Ultracharged joints less tiles 9-10 mm thick (square/rectangular). area of each tile exc 0.36 sqm but n.exc 1.00 Sqm in floor etc set and jointed in neat cement slurry and pointing in white or coloured cement to match the coloure of tiles over and including 15 mm thick screed bed in CM 1:6 complete all as directed and specified
All as per item No. 30 above but on vertical surfaces over and including 10 mm thick rendering in CM 1 :4 complete all as specified and directed.
M&L for 12 mm thick Gypsum board ceiling with and including GI frame grid, gypsum conrnices any shape and design as approved by GE and applying two coats of Royale shine paint (Pearl white) over and including a coats of primer and wall care putty complete, all as specified and directed.
M&L for Granite stone slab flooring 18-19 mm thick any colour/shade (as approved by GE) machine cut and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, rounding edges as required over 15 mm thick rendering in CM 1:3 to be fixed as in door/window cladding/openings and flooring complete all as specified and as directed.
Roundiing to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations.
M & L for UPVC windows with glazing, white colour provided all as per manufacturer's direction and following specifications all as directed. 1. The profile for construction of UPVC window frame shall be made of UPVC material confirming to IS 10151. 2. The frame shall be made of extruded UPVC section having overall dimension of 65 × 50 mm having wall thickness 2 mm ± 0.2 mm 3. Corners of wall frame shall be joined by MS galvanized brackets, joints mitred and plastic welded . 4. The hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provided at the bottom of the frame. 5. The profiles should be single chamber system which shall provide high insulation properties. 6. The window system should be glazed with 6 mm thick plane glass fixed in window frame as per manufacturer's instruction . Note: The entire fixing shall be done as per manufacturer's instructions and specification and as directed by Engg-in-Charge.
M&L for providing UPVC Door with Shutters. The construction profile for UPVC Door shall be overall frame sectional size 60 x 58 mm with wall thickness 2.70 +/- 0.2 mm extruded sections. The corners shall be plastic welded. The hinge side vertical outer frame shall be reinforced with galvanised steel profile of wall thickness 1.2 mm +/- 0.2 mm. The door shall be fixed to walls using 8 mm dia 80 mm long MS screws minimum 3 Nos on each side. The glazing shall be fixed to door frame with UPVC standard beadings of sectional size 24.05 x 16 mm & 2 mm thick. The bottom portion of door shutter shall be provided with UPVC board 5 mm thick & 1 mtr in height and the balance shall be glazed excluding the shutter frame area. The shutter shall be fixed to frame using 3 nos of 3D hinges. The Door shutter shall be provided with 12 mm thick sheet glass & 5 mm UPVC board with EPDM rubber gasket, one motice lock with powder coated handles and two numbers powder coated MS tower bolts complete all as specified & as directed.
M&L for UPVC Fixed ventilators with glazing all as per manufacturer's direction and following specifications :- (1) M&L for UPVC ventilator frame shall be made of PVC matereial confirming to IS 10151.the Ventilator frame shall be made of extruded UPVC section having overall dimension of 60 ×60 mm having wall thickness 2.5 mm ± 0.2 mm . Corners of wall frame shall be shall be joined by MS galvanized brackets.joints mitred and plastic welded . the hinge side vertical outer frame shall be reinforced with galvanized MS tube of wall thickness 1 mm ± 0.1 mm and the tie rod shall be provide at the bottom of the frame. (2) Glazing shall be provide with 5mm thick frosted glass fixed with approprite size beading as per manufacures specifications. Make : Madhu indrusties/AMD overseas Ltd/Gadli industries.
M & L for 10 to 12mm thick granite tiles of any size or colour ( as approved by GE ) in floor set and jointed with in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
S&F Factory made machine pressed Chequered cement concrete colour tiles 30 cm X 30 cm X22 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors , over 20 mm thick screed bed in CM 1 :4 complete all as specified and as directed.
Demolition of Brickwork or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified
Taking down cement or cement lime plaster of any description on brick or stone wall etc incl racking out joints, hacking for key scrubbing down with water etc.
M &L for precast Cement Concrete block masonry (1:3:6) type C1 with solid block,exceeding 10 cm in width and setting in cement mortar 1: 6 .
M & L for walling of Ashlar stone masonary, Plain, well bonded, build in cement mortar 1:4 complete all as specified and direcred.
Extra over stone walling for hammer dressing facings with maximum depression on face from straight edge held against the dressed surface n.exc 20mm to block-in-course masonary as in punched dressed face as in granite and trap stone complete all as specified and directed
M & L for raised pointing to ashlar masonary or polygonal rubble masonry in Cement mortar 1:4 all as specified and directed,
S & F in repair precast cement concrete louvres and jallies, 35 mm thick , including all mould- ings casted in cement concrete 1:2:4 using 12.5 mm graded aggregate and set in cement morter(1:4)
M&L for rendering 15 mm thick on fair faces of brick work/Stone work in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparing new surfaces of wall and applying two coats of distemper oil emulsion over and including one coat of primer and one coat of wall care putty complete all as specified and directed.
M & L for applying two coats of Royal shine over and including one coats of primer and two coats of wall care putty complete all as specified and directed.
M & L for complete removal of existing treatment from old wall surfaces applying two coats of Royal shine over and including one coats of primer and two coats of wall care putty complete all as specified and directed.
M & L for complete removal of existing treatment from old celing surfaces applying two coats of oil bound distemper over and including one coats of primer and one coat of wall care of putty complete all as specified and directed.
M&L for preparing new or previsioly untreated steel surface and applying two coats of synthetic enamel paint exc 10 cm width or girth over and including one coat of primer complete all as specified
M&L for preparing old painted steel surface and applying one coats of synthetic enamel paint exc 10 cm width or girth complete all as specified
M & L for applying two coat of external weather coat with brush/roller finished even and smooth on old plastered and unplastered surfaces of walls and all as dirceted and as specified.
M & L for applying one coat of external weather coat with brush/roller finished even and smooth on old plastered and unplastered surfaces of walls and all as dirceted and as specified.
Taking down and fixing at same location stainless steel railing made of 50mm dia stainless steel tube with stainless steel caps cone top, vertical, 900mm high, 900/1200mm centre to centre and 75mm inserted in PCC, 02 nos stainless steel chain pole to pole, indutrial type, in two rows horizontally, welded to vertical stainless steel post embedded in concrete/stone masonry all as directed embedded in concrete/stone masonry all as directed.
E/M PORTION Taking down carefully old existing unserviceable Aluminium/ Copper batten /surface conduit /concealed conduit point wiring (light /exhaust fan /socket /call bell / power point) complete including (fittings and fixtures such as switches, ceiling roses, shades, brackets, sockets, holders, light fittings, call bells, fluorescent tube light fitting) removing the unserviceable retrieved materials from site making good the disturbed surfaces of walls/floors/ ceilings etc. complete all as specified and directed. Note : Old existing 2' x 2' light fittings and recess type ceiling and picture lights of any size/type taken down/dismantled to be deposited to MES E/M Storeyard and cost of transportation of the same from site of work to MES E/M Storeyard is deemed to be included in the unit quoted rates.
Taking out unserviceable PVC insulated/sheathed sub main wiring with 2 single core aluminium conductor cable of size upto 10 Sqmm on wooden batten /PVC conduits complete with battens /conduits and shall be removed from site and making good the disturbed surfaces of wall complete all as specified and as directed.
Disconnecting /dismantling of old existing un serviceable DB's any way 240 /415 Volts with their old/unserviceable burnt MCBs complete all as specified and as directed.
M & L for point wiring with 1.5 Sq mm, PVC insulated, FRLS, single core, copper conductor cable, 1100 Volt grade, multi stranded drawn through and including medium grade Rigid non metalic PVC conduit concealed in wall/ceiling/roof etc with all necessary accessories for One light/fan/call bell point controlled by one switch controlled by one switch with and including continuous 1.5 Sqmm PVC insulated single core copper conductor cable earth continuity conductor connected to common earth and earth dolly, in the modular flush boxes etc. complete all as specified and directed by Engr-in-Charge. Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth. (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates. (iii) Modular flush boxes will be measured & paid seperately. Make of Cable : Havells/ Finolex/ Polycab Make of Conduit : Finolex/ Precision/ Bajaj Plast/ Modi
Description all as per Item No 59 above, but One 5 Amps 5 Pin socket outlet on independent board complete all as specified and as directed. Make of Cable : Havells/ Finolex/ Polycab Make of Conduit : Finolex/ Precision/ Bajaj Plast/ Modi
Description all as per Item No 61 above but with PVC insulated copper conductor cable of size 2.5 Sqmm and 2.5 Sqmm for earth continuity conductor for 16A switch socket complete all as specified and as directed. Note: (i) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (ii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates.(iii) Modular flush boxes will be measured & paid seperately Make of Cable : Havells/ Finolex/ Polycab Make of Conduit : Finolex/ Precision/ Bajaj Plast/ Modi
M & L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS cable with multi stranded copper conductor of size 2.5 Sqmm drawing through and including medium grade non mettalic rigid PVC conduit concealed in wall/ceiling/roof etc. including continuous PVC insulated copper conductor single core earth continuity conductor of size 2.5 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Note:(i) 3 runs of 2.5 Sqmm cable and one run of conduit shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates. Make of Cable : Havells/ Finolex/ Polycab Make of Conduit : Finolex/ Precision/ Bajaj Plast/ Modi
M & L for sub main wiring with two single core, multi stranded, PVC insulated, 1100 Volt grade, FRLS cable with multi stranded copper conductor of size 4 Sq mm drawing through and including medium grade non mettalic rigid PVC conduit concealed in wall/ceiling/roof etc. including continuous PVC insulated copper conductor single core earth continuity conductor of size 4 Sqmm connected common earth complete all as specified and directed by Engr-in-Charge. Note:(i) 3 runs of 4 Sqmm cable and one run of conduit shall be measured as one unit length (ii) The wiring shall be done in proper color coding using red,yellow,blue for phases, black for neutral and green for earth (iii) The cost of cutting chases and making good the disturbed surfaces is deemed to be included in the unit quoted rates Make of Cable : Havells/ Finolex/ Polycab Make of Conduit : Finolex/ Precision/ Bajaj Plast/ Modi
S & F Modular type socket outlet (ISI Marked) 2 in 1, 6/16 Amps complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVKCWW163 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F in repairs Modular type switch single pole 16 Amps one way complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No : ACVSXXW161 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F in repairs Modular type switch single pole 6 Amps one way complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No: ACVSXXW061 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F in repairs Modular type socket outlet (ISI Marked) 6 Amps 2/3 pin combined 2 module complete all as specified and as directed. Make : Verona of Crabtree (Havells), Cat No: ACVKWW063 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F concealing modular metal flush box suitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX01 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F concealing modular metal/PVC flush box suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F concealing modular metal flush box suitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACTXMIIX06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F modular cover plate suitable for fixing switches/sockets of 1/2 modules complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV01 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F modular cover plate suitable for fixing switches/sockets of 3 modules complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV03 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab
S & F modular cover plate suitable for fixing switches/sockets of 6 modules complete all as specified and as directed. Make : Verona of Crabtree ( Havells), Cat No : ACVPPCWV06 or techno-commercially equivalent in Legrand/Anchor Roma/Polycab Note for item Nos 65 to 74:- The make/model of modular metal flush boxes & modular cover plates shall be same as that of modular switches & sockets.
S & F of ceiling rose surface mount PVC / Polycarbonate, isolated body with face bakelite two /three terminal complete all as specified and directed. Make: Havells/CG/Anchor
Supply,install,testing and commissoning of fan exhaust,single phase,250mm sweep, PVC body with their all accessories fixed properly on window/ stone wall surfaces of thickness not exceeding 50cm including making proper sized exhaust hole of 250 mm dia, Louver Shutter suitable for the same exhaust fan and which shall easily be operated with exhaust air pressure. Any disturbed surfaces of wall shall be made good by cement work/plastering and matching by existing colour white/colour wash including removing of old exhaust fan and handed over to MES Store complete as directed.Make: Havells ,Code:Venti Air-DX white or equiv in Crompton/ Usha.
S & F IP>=20, Class I, Wall mounted 4 feet LED lighting fixture with integrated electronic driver & polycarbonate difuser complete with all accessories, prewired, 20 W with min 1800 lumens, 6500 K, PF>=0.90, CRI>=80 and connecting of flexible wire twin core from ceiling rose to fitting in flexible conduit complete all as specified and as directed. Make: Havells, Cat No: ENDURALINEARN EOBS20WLED865SPCWH or techno-commercially equivalent in Philips/Jaquar
S & F ultra modern, surface mounted, 18W, 6500K LED Elegant surface panel complete with electronic driver & high brightness LED incl taking down old/unsv fittings complete all as specified and as directed. Make: Luker, Cat No: LNPSRS18 or techno-commercially equivalent in Jaquar/Philips
S & F IP >= 65, IK>=07, Class I energy saving and environment friendly long life high power LED as source of building security light of 25W made up of pressure die cast aluminum housing with acrylic cover as diffuser with including GI pipe bracket made out of 40mm dia light grade pipe of length 1.2 Mtrs, bend to shape 120-130 degree and MS clamps made out of 25 x 3mm flat iron 2 Nos including nut and bolts for fixing the bracket and making connections in flexible conduit complete all as specified and as directed. Make: Havells, Cat No : ENDURAPEARLSL25 WLED757SASYTOPC (Endura Pearl) or techno-commercially equivalent in Philips/Jaquar
S & F ceiling /wall / panel mounted LED TRACKLIGHT (WHITE COLOUR) 18 W or next higher rating suitable for Track Channel 1/2 Mtrs span, CRI > 80, CT=6500 K (White), twin / three core twisted flexible copper conductor cable of suitable size in flexible conduit complete all as specified and as directed. Make: Luker,Cat No : LSPT18 or techno-commercially equivalent in Philips/Jaquar. Note: The cost of making good and matching to the existing surface is deemed to be included in the unit quoted rates.
S & F ceiling /wall /panel mounted LED TRACK CHANNEL (WHITE COLOUR) 1 Mtrs length suitable for mounting of 02 Nos Tracklights 18 W, integrated type with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible conductor cable of suitable size complete all as specified and as directed. Make : Luker, Cat No : LTM1 or techno-commercially equivalent in Philips /Jaquar /Havells. Note: Track Lights 18 W shall be measured & paid separately under relevant items twin/three core twisted flexible copper conductor cable of suitable size in flexible conduit
S & F LED square shape,ultra modern, recess mounting, 40W, CT=6500K(white) integrated type with high efficiency, electronic driver, surge suppression/protection & high brightness,LED slim panel of size 2' x 2' with suitable fixing arrangment incl cutting existing false ceiling any type(if reqd) & matching complete with all accessories internally prewired and including connecting up with and including twin/three core twisted flexible copper conductor cable of suitable size incl taking down old/unsv fittings complete all as specified and as directed. Make: Luker, Cat No: LPS40 or techno-commercially equivalent in Jaquar/Philips
S & F MCB, SPN, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make: L&T, Cat No : BB20320C or techno-commercially equivalent in LEGRAND /SIEMENS.
S & F Miniature circuit Breakers, single pole and neutral, C-Series 240 volts of capacity (40 Amps) as ordered with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No: BB20400C or techno-commercially equivalent in Legrand/ABB/Siemens.
S & F MCB, SP, C-Series 240 Volts of capacity 6-32 Amps with breaking capacity 10 KA complete all as specified and as directed. Make : L&T, Cat No: BB10(6-32)0C or techno-commercially equivalent in LEGRAND/SIEMENS.
S & F SPN DB, 12 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. Make: L&T, Cat No: DBSPN012DD or techno-commercially equivalent in Legrand/ABB/Siemens. Note:- The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F SPN DB, 8 Way IP43, IK09, Metal double door type 240 volts fitted with busbar and blanking plates, neutral link and making good making good the disturbed surfaces with all other accessories including necessary connection complete all as specified and as directed. Make: L&T, Cat No: DBSPN008DD or techno-commercially equivalent in Legrand/ABB/Siemens. Note:- The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F MCB DB, DD, TPN 4 way, IP 43, IK 09, metal double door type 415 volts fitted with busbar & blanking plates, neutral link complete all as specified and directed. Make: L&T, Cat No: DBTPN004DD or techno-commercially equivalent in Legrand /ABB /Siemens. Note:-The cost of making good the disturbed surfaces is deemed to be included in the unit quoted rates.
S & F MCB TPN/ 4 Pole, 63 Amps, 10 KA breaking capacity, C-Series complete all as specified and as directed. Make: L&T, Cat No : BB40630C or techno-commercially equivalent in Legrand /ABB /Siemens.
M & L for earthing complete with galvanised steel earth plate electrode 600 x 600 x 6mm thick buried directly in ground (earth pit not less than 2.25mtrs deep below ground level) with top edge of plate not less than 1.5mtrs below normal ground level, connected to GI strip of size 32 x 6mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 connected to earthing test point on completion with and including 40mm bore medium grade GI protection pipe (upto 7.5mtr long) for earth and 20mm GI medium grade for watering including PCC chamber pit & cover with suitable lifting hooks, with funnel, wire mesh, common salt, charcoal filling, necessary excavation and earth work in any type of soil including taking out the existing u/s earthing accessories complete all as specified and as directed. Note: On testing after completion, if the desired earth resistance is not obtained the earthing shall be redone at no extra cost till the entire satisfaction of Engr-in-Charge.
VVM CONSTRUCTIONS
P K ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .