REPAIR TO CHAJJA ,FACIA, LEAKAGE SEEPAGE AND MISC B/R WORK TO OTM AND MD ACCN IN ZONE-III UNDER AGE B/R-III OF UNDER GE (SOUTH) MEERUT CANTT.

Amount

Complete removal of existing roof treatment, washing down the surfaces with water and removing debries from site complete all as specified and directed

Material & labour for 20mm thick rendering in CM 1:4 mixed with water proofing admixture as per manufacturer's instructions on fair faces of brick wall or concrete surfaces , finished even and smooth complete all as specified (Note:- WPC shall be measured and paid seperately)

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a tack coat @ 1.20 kg per Sqm using 85/25 grade industrial bitumen , over it laid with APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3.60 kg per Sqm, unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed

Supply only liquid water proofing compound complete all as specified and directed.

Material & labour for providing cement concrete 1:2:4 Type B-0 (using 12.5mm graded crushed stone aggregate) in roof kerbs or mud stop, padding concrete on roof slab etc complete all as specified and directed

Material & labour for sunken slab treatment comprising of the following :- (a) Taking out/ down old existing sunken slab treatment including plaster and PCC etc and cleaning the old RCC surfaces of sunken slab including removal of the rubbish from the site of work to a distance n.exc. 250metre (b) 25mm thick PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) over cleaned sunken slab surfaces. (c) Applying bituminous priming coat/tack coat over PCC surfaces @ 0.30 Kg per square meter of surfaces. (d) Applying bitumen grade 85/25 over priming coat @ 1.20 Kg per Square meter. (e) 25mm thick plastering in CM 1:4 mixed with water proofing admixture as per manufacturer instruction (f) PCC 1:5:10 type E-2 (using 40mm graded broken brick aggregate) for filling in the sunken portion of slab up to its floor level. (g) 32mm dia GI pipe medium grade, 450m long as in drain out pipe complete as specified and directed. ( Note :- WPC shall be measured and paid for seperately)

Dismantling, floor, hearth or wall tiling including cement mortar bedding but not backing and removing rubbish off the premises complete all as specified & directed.

Material & labour for non skid ceramic coloured tiles 400mmx400mm size and 7-8 mm thick (Square / rectangular) in floors ,set and jointed in neat cement slurry and pointed with white or colour cement to match the colour of tiles laid over and including 15mm screed bed in cement mortar 1:6 complete all as specified & directed.

Material & labour for joint free glazed ceramic coloured tiles, of size 450mm x 300mm x 7-8 mm thick in dado/skirting , set and jointed in neat cement slurry and pointed with white or colour cement to match the shade of tile over and including 15mm plaster in cement mortar 1:4 complete all as specifed & directed.

Material & labour for light shade vitrified tiles 10 mm thick (Square/rectangular) polished area of each tiles n.exc 0.36 Sqm in floor, set and jointed in neat cement slurry and joints filled with white cement mixed with colour pigment to match laid over and including 15 mm thick screed bed in CM 1:6 complete all as spfd and directed

Material & labour for light shade vitrified tiles 10 mm thick (Square / rectangular) polished, area of each tiles n.exc 0.36 Sqm on vertical surface as in skirting/dado set and jointed in neat cement slurry and joints filled with white cement and pigment to match with colour of tiles laid over and including 10 mm thick rendering in CM 1:4 complete all as specified and directed.

Material & labour for 25 mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) finished fair & even as in Sub base flooring complete all as specified & directed.

Material & labour for repair to overhang portion of chajja, facia, dropwall etc. for continuous work by providing PCC(1:2:4) Type B-0 and finished with CM(1:3) after taking down of damaged portion of RCC work by maintaining same level and finished the surface to match with the existing surface by providing same finish including taking down old chajja, facia, dropwall and incl removal of damaged portion of repairing scrubbing down with water and removal of debris from site and disposed out side the MD land ) complete all as specified and directed.(Height of work upto 4.00m from FFL of Ground Floor.)

All as per serial item No.13 above but height of work exc. 4.00 mtr and up to 7.5 mtr from FFL of ground floor complete all as spd and directed.

All as per serial item No.13 above but height of work 7.5 mtr and up to 11.00 mtr from FFL of ground floor complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone walls, etc including racking out joints, hacking for key, scrbbing down with water etc complete all as specified and directed.

Material and labour for 10 mm thick rendering in Cement mortar 1:6 on brick or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in Cement mortar 1:4 on brick or concrete surfaces finished fair and even without using extra cement complete all as specified and directed.

Material and labour for 10mm thick rendering in Cement mortar 1:3 on brick or concrete surfaces as in ceiling, finished even and smooth without using extra cement, complete all as specified and directed.

Demolition of brick work built in cement mortar including all quoins, arches, pillar etc complete all as specified and directed.

Material and labour for fly ash brick work with sub class ‘B’ bricks, old size bricks , straight or curved on plan exceeding 6 mtr mean radius built in cement mortar (1:6) complete all as specified and directed.

Material & labour for brick work with sub class' B' bricks(except bricks) of old size including cleaning of old brick , straight or curved on plan exc 6 m mean radius built in cement mortar 1:6.complete all as specified and directed. ( Note:- old bricks obtained from item No 20 shall be used )

Material and labour for applying two coats of white wash on ceiling surfaces including preparation of new plastered surfaces complete all as specified and directed

Material and labour for preparation of new plastered or un-plastered surfaces of walls and applying two coat of cement base paint over one coat of cement base primer complete all as specified and directed

Materials & labour for preparation of new plastered surface of wall etc and applying two coats of OBD over and including a coat of wall care putty to match the existing surfaces of wall as required complete all as specified & directed

Materials and labour for preparation of new plastered surface of walls and applying two coats of exterior emulsion paint (weather proof) over prepared surfaces of walls complete all as specified and directed.

Material and labour for TMT bars 10mm dia and over cut to length, bend to shape required including crankin, bending spirally for chajja and binding with and including mild steel wire (concealed) not less than 0.90 mm dia or securing with clips all as specified and directed.

vibha associates

Manglam Engineers and Construction Co

jitendra AND Co