Augmentation of electrical panel

Amount

Providing, laying , testing & commissioning of 'C' class heavy duty MS pipe confirming to IS 3589/IS 1239 including welding fittings like elbows, tees, flanges, tapers, nut bolts, gaskets etc. and fixing the pipe on the wall/celing with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as reqd.

200 mm dia (wall thicknes 6.3 mm )

250 mm dia (wall thicknes 6.3 mm )

300 mm dia (wall thicknes 7.1 mm )

500 mm dia (wall thicknes 9.5 mm )

P & F of M.S.Blank Flange with required nut bolts & packing sheet etc complete as required of following Dia:-

150 mm (10 mm thickness)

200 mm (20 mm thickness)

500 mm (25 mm thickness)

P & F of M.S. Flange with required nut bolts & packing sheet etc complete as required of following Dia:-

75 mm (10 mm thickness)

200 mm (20 mm thickness)

250 mm (20 mm thickness)

300 mm (25 mm thickness)

500 mm (25 mm thickness)

Replacement of M.S. Bend with required nut bolts & packing sheet etc complete as required of following Dia:-

75 mm (5 mm thick),length 0.3 m

200 mm (8 mm thick),length 0.5 m

250 mm (8 mm thick),length 0.5 m

500 mm (5 mm thick),length 1 m

Supply of Ball Valve with Flange Confirming to IS-9890-1981 (Three piece design) of following size

Ball valve 80 mm , class 125

Supply of Antivibrating Cushy Foot Mounting of following size

B-Series

Providing, installation, testing & commissioning of valve of non-retern valve of following sizes confirming to IS:5312 complete with rubber gasket, GI bolts, nuts, washers etc as reqd.

NRV 80 MM

NRV 250 MM dia

Providing and laying in position reinforced cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

Hiring of Air compressor 250 cfm with two leads for pneumatic cutters/hammers with Opoerator for cutting of RCC lantel slab over the sump well.

Providing & filling of Transformer oil in Auto Transformer Starters.

S & f of LT Power Capacitors super Heavy duty suitable for 3 phase 440 V. (Box type, MPP resin filled) with ISI mark of following ratings as reqd.

S & F TP sheet steel enclosure on surface/recess along with 16/25/32 A 415 V ''c'' curve TP MCB complete with connections , testing and commissioning etc. As reqd.

Wiring for circuit / submain wiring alongwith earth wire with the following size of FRLS PVC insulated copper conductor , single core cable in surface/recess medium class PVC conduit as required.

2 x 6 sqmm + 1 x 6 sqmm earth wire

2 x 10 sqmm + 1 x 10 sqmm earth wire

S/F of compartmentalized cubical type panel board duly powder coated made out of 16 SWG M.S sheet with insulated 600 amp. Aluminium bus bar interconnection hard strip arrangement for mounting for switch gears, changeover switches, MCCB i/c making the foundation brick work/angle iron frame on floor / wall with proper locking arrangement , CT,PT meter etc complete as required at site

Upto 60 to 90 cm

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 A, 16 KA,TPMCCB

250 A, 25 KA,TPMCCB

630 A, 50 KA,TPMCCB

S/I/TC of oN load manually operating handle change over switch (confirming to 60947-3, IS/IEC 60947-3) suitable for fixing in existing cubical panel board including drilling holes in cubicla panel , making connetions etc. Complete as reqd

4 Pole 630 Amp.

Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/unloading by skilled labour, to & fro cartage along with replacement of its parts/accessories i/c gland plate/spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing, replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects.

Having suction of 250 mm (Model no. MF 20/25)

Replacement of shaft sleeve of following dia/models of storm water pump etc. as required.

Having suction of 250 mm (Model no. MF 20/25)

Replacement of bearing of following dia/models of storm water pump etc. as required.

Having suction of 250 mm (Model no. MF 20/25)

Replacement of Impeller of following dia/models of storm water pump etc. as required.

Having suction of 250 mm (Model no. MF 20/25)

Replacement of coupling complete as required with nut/bolts etc as reqd following sizes. (a) TC/N/016

Lifting the existing sewage submersible pump set with its all accessories from sumpwell and lowering the same along with all accessories from following depths complete as reqd. From depths more than 10 M to 15 meters deep.

Repairing of Sewage Submersible Pump set of 5 Hp A) Supply of Spares for sewage Submersible:-

O Ring set

Cable Grommet

Lead Grommet

Mech. Seal (Upper)

Mech. Seal (Lower)

Seal Holder

Ball Bearing (Upper)

Ball Bearing (Lower)

Pump Base

Seal Housing

Hardware

Rewinding Kit

B). Job Work

Labour charge for rewinding

Labour charge for repairing & balancing of rotor

Labour charges for dismantling/assembling/ painting.

PVC cable 4 core 2.5 sq.mm + 2 core 1 sq.mm

Supply and fabrication of pole protection system made up of 8SWG steel wire mesh of size 25 mm x 75mm rectangular with 50mmx50mm x6mm MS angle iron for supporting the mesh and grounding the protection system in suitable quality of CC etc as reqd.

S.I.T.C. of 150 Watt LED flood light luminiare fitted with lense made of pressure die cast aluminium housing and Toughened glass cover complete with following specifaction as reqd. a) Total system wattage = 150 watt +- 5 % b) Lumnairer efficacy >= 100 luman/watt c) Power Factor>= 0.95 d) protection Class- IP-66

bharat electricals & electronics