REPAIR TO FLOORING PLASTERING SANITARY PLUMBING FITTINGS AND MISC BR WORK IN ZONE A AREA OF AGE BR I CENTRAL UNDER GE CENTRAL KIRKEE

Amount

Demolition of cement concrete (unreinforced) in ground floor and paving below or above GL Complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection and paths laid in alternate bays & surfaces finished even and smooth without using extra cement complete all as specified and directed.

M & L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor to maintain required gradient/undulation, finished even and fair complete all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including Demolition of existing floor tiles, stone slab of any description complete all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 300x 450x 7 mm/ 300X 600X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including including 10 mm thick cement plaster in CM (1:4) and dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including Demolition of existing floor tiles, stone slab of any description complete all as specified and directed.

M & L for coloured non skid ceramic tiles tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6 including Demolition of existing floor tiles, stone slab of any description complete all as specified and directed.

M & L for Machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick screed bed in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, including Demolition of existing floor tiles, stone slab of any description complete all as specified and directed.

M & L for 100mm thick Cement concrete type B - 2, 1:2:4 (40mm graded aggregate) as in flooring laid in alternate panells, finished even and smooth using extra cement, complete all as specified and directed.

M&L forming Contraction (Dummy) joints 100mm deep x 10mm wide, filled with sealing compound Garde 'A' complete all as specified and directed.

M & L for 75mm thick Cement concrete 1:4:8 Type D-2 (using 40mm graded agg) as in sub base of floors/interlocking tiles complete all as specified and directed.

M & L for Machine pressed precast cement conctete interlocking paver block rubber moulded glossy finished any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment including 50mm thick sand cushion including dismantling of existing Interlocking tiles of any type/size and in any position complete all as specified and directed.

M&L for Machine cut cudappah stone laid vertical or horizontal 18 to 22mm thick jointed with adhesive to make a cooking platform including dismantling existing RCC/PCC or any type of platform.

M & L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window - cills, cooking platforms and like over 15mm thick cement plaster in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

S & F in repair cast iron floor trap square type with CP grating with or without hole including provision of jointing to waste pipes in run lead joint dia of outlet 75 mm, complete all as specified.

Taking down cement plaster on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M & L rendering 10 mm thick on concrete surfaces in CM 1:6, finished with sagol finish on plastered surface of internal wall, complete all as directed.

M & L rendering 20 mm thick in two layer on stone masonry surfaces in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

M & L for rendering 15mm thick in CM (1:4) on fair faces of brick work or concrete surfaces including finishing the surface fair and even using water proofing compound all as specified and directed. (Note: (i) Plaster work in Four story building on wall surface. (ii) Water proofing compound paid and measured separately)

M & L rendering 5 mm thick on concrete surfaces as in ceiling in CM 1:3, finished with sagol finish on plastered surface of internal wall, complete all as directed.

M & L for preparing newly plastered surfaces of wall including preparation of surfaces and applying two coats of oil bound distemper over a coat of primer on wall surfaces complete as specified and directed.

M & L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of cement base paint over a coat of primer complete all as specified.

M&L for preparation of new plastered surfaces and applying three coats of white wash on ceiling/chajjas complete all as specified and directed.

M&L for making hole in concrete or tiles surface and fixing the metallic packer for injecting hydrophobic PU form and sealer as manufacture's instuction (Avg one metallic packer per sqm) (Make : Build core chemicals, MC bouchmie, Pidilite or equivalent approved make.)

M&L for CORESEAL 357A/ CORESEAL 357 CAT (forming agent for carring out non desrtuctive waterproofing treatment of sunken portion slab, floor and wall of bath, WC, WHB and floor trap (combined unit) by using construction chemical methods such as 1. HYDROPHOBIC PU GROUTING incl cleaning of surfaces with wire brush detecting the sources of leakages. (Make : Build core chemicals, MC bouchmie, Pidilite or equivalent approved make.)

M&L for second course injection of CORESEAL 135A/CORESEAL 135B (sealing agent) (Make : Build core chemicals, MC bouchmie, Pidilite or equivalent approved make.)

Repair to sunken floor including inside wall as follows : 1) Cut, open and clean cracks in the sunken floor and side wall and repair them with polymer modified mortar 15mm thick modified with Dr. Fixit Pidicrete URP. 2) Prime the surface with Dr. Fixit Primeseal and allow it to dry. Apply the first coat of Dr. Fixit Newcoat. 3) While it is still wet, place a woven glass fibre mesh of measurements 2 mm x 2 mm and allow it to soak completely. 4) Immediately apply the second coat with a roller or squeeze, to ensure complete coverage of the fibre mesh. 5) Apply the third coat after 6 to 8 hours, once the second coat is dry.

M&L for PCC 1:5:10 type E-2 (using 40mm graded agg) as in sub base of WC sunken floor complete all as specified and directed.

S & F in repairs water closet (Squat Pattern) complete including provn of lime concrete bedding Orissa pattern size 580 x 440mm white integral foot rests (excluding flush pipe or flushing cisterns) including S&F PVC 'P' trap 100/110mm bore dia, 100/110mm PVC (SWR) WC connector with lip ring and connection to flushing pipe anti syphonage pipe etc complete and making good to floor as directed.

S & F in repairs Vitreous china wash down water closet pan (Pedestal pattern) white (excl fixing bolts, flushing cistern and flush pipe) but including plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel CP or aluminised hinging device complete all as specified and directed.

S & F in repairs, Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum) with grating and union for discharge pipe (excl flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

S & F in repairs Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe (minimum weight 60 gms) complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litres complete all as specified and directed.

S & F in repairs viterious china wash basin white flat back size 550 x 400 mm excluding taps waste chain and plug and porcelain stopper but including necessary brackets CP wastes and other fittings all as specified and directed.

S & F in repairs pillar taps chromium plated cast copper alloy with capstan heads screwed down high pressure with or without lettered Hot Or Cold With long screwed shanks and fly nuts screwed for iron pipes 15mm dia all as specified and directed.

S & F in repairs Bib tap 15 mm bore, brass CP, with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule complete all as specified.

S & F in repairs angle stop cock CP Brass fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe 15mm dia all as specified and directed.

S & F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guities embeded in cement mortar (1 : 3) with steel screws etc, complete all as specified.

S & F GI tubing 15mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors complete including taking up or down Galvanised steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm complete all as specified and directed.

S & F GI tubing 20mm bore medium grade, galvanised, ISI marked with all fitting and fixed complete to walls and ceilings or laid in floors including taking up or down GI tubing 20mm bore and connections complete all as specified and directed.

S & F 110mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings, heads, shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and as directed.

S & F 75mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls or laid in floors as sanitary fittings, rain water pipes etc in any position including taking down sanitary pipes, eaves gutters and rainwater pipes (any size or pattern), in any type and position including all fittings, heads, shoes, bends, swan-necks, branch pieces, couplers, reducers, vent cowl, stack clamps etc. complete all as specified and directed.

S&F in repair 110mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair 75mm PVC (SWR) vent cowl complete all as specified and directed.

S&F in repairs 75mm PVC (SWR) bend with access door of any radius complete all as specified and directed.

S&F in repairs 110mm PVC (SWR) bend with access door of any radius complete all as specified and directed.

S&F in repair 110mm PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 500 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 1000 lts capacity, double layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia brass float valve and polyethylene ball including taking out existing unserviceable overhead tank of any description complete all as specified and directed.

V.R.PRAJAPATI AND CO.

M/S DARSHAN ENTERPRISES

MAHESH DADAJI BACHHAV

L.K.R.TIWARI CONSTRUCTION

S.R.M.K Enterprises

Shri Sant Cosntruction

Om Construction