Spl Rep to Toilet, Bathroom and Spl Rep/Replacement of main MCB DB with allied works and Provn of Certain Revenue / Minor Works at Mil Stn Gaya

Amount

Surface excavation not exc 30cm deep and averaging 15 cm deep and getting out in soft/loose soils.

M&L Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete.

M&L Sand filling under floors are in foundation including watering and consolidation complete.

M&L 75mm thick cement concrete type C1, PCC 1:3:6 (20mm graded stone agg) as in path/hardstanding.

M&L Machine pressed precast concrete interlocking paver block coloured glossy finish, with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade complete.

Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point

M&L Glazed ceramic tiles in vertical surface 600x 300x 10mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match and incl 10mm thick screed bed or bedding layer with CM 1:4 including taking down existing tiles complete.

M & L 10mm thick rendering as in backing coat for receiving wall tiles in CM 1:4 with WPC as per manufacturer instruction.

Taking down cement plaster on brick or stone walls etc, including racking out joints, hacking for key, scrubbing down with water etc.

M & L Application of 1.00mm thick SmartCare Damp Block 2K along with Smartcare Vitalia in two layers and making the surfaces smooth & uniform on new plastered surfaces of walls including removing existing treatment all as specified and as directed. Make Asian Paint or Dr Fixit or equivalent

M & L One coat of royal distemper on walls and making the surfaces smooth & uniform all as specified and as directed. Make Asian Paint Royale or equivalent

Supply only integral water proofing compound Sika Latex or equivalent

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil etc complete.

Excavation in trenches not exc 1.5m wide and exc 1.5m and n.exc 3m in depth for foundation etc or for shafts, wells, cesspits, manholes pier holes etc not exc 10 sqm on plan and not exc 1.5m in depth and getting out in hard/dense soil etc complete.

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick complete.

M&L PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls of 110 mm bore of pipe etc complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or un equal of 110 mm bore of pipe complete.

S&F PVC (SWR) vent cowl of 110 mm bore of pipe complete all as specified and directed

M&L Brick work using fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M&L Brick work using fly ash bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete all as specified and directed.

M&L Rendering on brick work or concrete surface of wall 15mm thick in CM 1:4 and to be finished even and fair with out using extra cement complete.

M&L PCC 1:2:4, type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, drains and channels etc and similar work incl form work.

M&L Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover slab (for manholes etc) and similar work incl form work and set in CM 1:4 complete

M&L Mild Steel TMT bar 6 to 8 mm dia cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with & incl Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exc 200 mm thick for rough finished flat surface of concrete complete.

M&L RCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in slab supported on wall, beam and column in floors, roofs, landings and similar work complete.

Excavation in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation and not exc 1.5m in depth and getting out in Soft/loose etc complete.

M&L Rendering on brick work or concrete surface of wall 5mm thick in CM 1:4 and to be finished even and smooth with using extra cement complete.

M&L Rendering on brick work or concrete surface of wall 10mm thick in CM 1:4 and to be finished even and smooth with using extra cement complete.

M&L RCC NP-2 drain pipes laid and jointed complete with collars in trenches of 450 mm internal diameter of pipe complete.

M&L Brick work using sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc.

Cutting holes into or through brick wall n exc 150 Sqcm in cement mortar and making good in cement mortar (1:3) or cement conrete (1:2:4) type B1 as required.

S&F 15mm dia bore stop valves/angle valves cast copper alloy (CP) fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and as directed. Make: Parryware/Hindware/Jaguar

S&F 600mm long tublar tower rail brass chromium palted 20mm dia, D type fixed with two plugs (Gutties) of 2nd class hard wood embeded in cement in cement mortar (1:3) with MS screws complete all as specifed and as directed. Make: Parryware/Hindware/Jaguar

S&F Shelf (100 x 600mm) of PTMT fixed with and including CP brass screws and wooden/ plastic cleats all as specified and as directed. Make : Prayag/Polytuff

Cutting in 15mm dia bore existing steel tubing for alterations or additions

S & F Vitreuos china wash hand basin size 550 x 400 mm flat back incl brackets or fixed to walls with anchor fasteners all cutting for and pinning in end of brackets or erecting stand, and inclusive of fixing and supply and 32 mm dia and 90 cm long PVC waste pipe and one CP pillar cock 15 mm dia , PVC connecting tube 15 mm dia with brass check nuts and CP waste coupling 32 mm dia complete Make-Parryware/Hindware/Jaguar

S & F CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors incl necessary cutting/chasing of walls and floors complete.

S & F CPVC pipes 25 mm outer dia SDR 11 & Plain CPVC SDR 11 includig all fittings on walls/ceiling or laying in floors incl necessary cutting/chasing of walls and floors complete.

S & F CVPC Brass threaded Elbow /Tee/ Reducing Elbow/Reducing Tee 20 mm outer dia.

S & F CPVC Male Brass Threaded Adaptor (MTA/ MBTA) or Female Brass Threaded Adaptor (MFTA/MFBTA) 20 mm outer dia

S& F PVC ( SWR ) floor trap 75 mm dia plain with grating & nahani trap including jointing with solvent cement complete all as specified and as directed. Make - Reliance, finolex, supreme, kisan, prince

S & F 75 mm dia bore PVC (SWR) bends any radius Make-Reliance, finolex, Supreme, Kisan, Prince

S & F 75mm dia bore PVC (SWR) bends with acess door. Make-Reliance, finolex, Supreme, Kisan, Prince

S&F PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors

S&F PVC(SWR) 75mm bore junction double (double T) equal or unequal with access door Make-Reliance/finolex/ Supreme/ Kisan /Prince

S&F PVC (SWR) 40 mm dia pipes incl fittings in floor/wall including necessary chase cutting complete all as specified and as directed

M&L Preparation of new or old plastered surfaces and applying 1 mm thick birla white putty/ JK white wall care putty and making the surfaces smooth & uniform including removing existing treatement all as specified and as directed.

M&L Preparation of new or old plastered surfaces and applying two coats of acrylic distemper on walls as specified and as directed.

Taking down chowkhats or frames exc 1.5 sqm but n exc 4 sqm each (without taking off shutters from the frame).

M & L 15 mm thick rendering in CM 1:4 over fair faces of brick work or concrete surfaces of wall and finished surfaces fair and even without using extra cement with WPC.

M & L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165

M & L Extra only over framed work for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc

M & L Applying two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces including preparation of newly plastered surfaces

S & F Galvanised steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

S & F Mild steel, plain, black sheet 1.25 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

S & F Stainless stell but hinges 100 mm size and welded to angle iron complete.

Taking down shutters of any description exc 1 sqm but n.exc 2 Sqm each and refixing in the same opening complete all as directed by Engr-in-Charge

Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness below or above GL

M & L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6.

M & L Two coats of cement based paint incl preparation of newly plastered wall surfaces.

Use & waste of formwork to rough finished flat surface of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete.

S&F Mild steel rolled section as in main posts fixed with angle cleats or other connecting plates confirming to Fe 410 W(Gde E - 250 quality).

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc Fe 410 W(Gde E - 250 quality) complete.

Cuttting holes exc 150 sq cm but not exc 400 sq cm into or through brick walls built in CM or cement lime mortar and stone walls built in cement mortar and making good in PCC 1:2:4 type B1 as complete.

S & F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, 12 mm dia and exc 5cm but n.exc 10 cm long complete.

S & F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for and removing from the site.

M & L Providing PCC type B1, 1 : 2 : 4, (using 20 mm graded aggregate) as in coping, and the like including weathering, slightly rounded or chamfered angles and throating complete with using WPC (Sika Latex power or equivalent) as per manufaturer instructions.

M & L Rendering 15mm thick internal surfaces on brick work in CM 1:6 and finishing surfaces even and fair without using extra cement complete.

M & L Rendering 15mm thick in two layers (10 mm thick & 5 mm thick) on external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC as per manufacturer instructions. Note :- WPC measured and paid separatly

M & L Two coats of cement base paint white or tinted on walls or fascia of roof or chajjas on old decorated prepared plastered/painted surfaces of bldg complete all specified & directed.

S & F Powder coated aluminium partition, frame/shutters for windows, ventilators sliding/ openable etc icluding joining cleat for fixing, locking arrangement, rubber beading, screws etc complete all as specified. Make : JINDAL/HINDALCO/INDALCO. Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item. (ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight (iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing.

Supply only Galvanised steel wire cloth. 0.56 mm nominal dia of wire and average width of aperture 1.18mm complete

Supply only 3 mm thick Sheet glass, ordinary quality, in squares n exc 0.5 sq. m each pane

Dismantling floor, hearth or wall tilling including cement mortar bedding and rubbish off the premises.

M & L Coloured Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed in CM 1:4 complete.

M & L Coloured vitrified outdoor tiles 10 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed in CM 1:4 complete.

M & L Coloured Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick screed in CM 1:4 complete.

M & L Providing 75 mm thick,cement concrete1:3:6 type C-1 (using 20mm graded crushed stone agg) as in plinth protection and simillar works finished even and fair without using extra cement. Note: Joints 12 mm wide to the full depth of PCC shall be provided at every 3 m and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provn shall be deemed to be included in the quoted rate

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using sub class old bricks (except bricks) straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

M & L RCC type B-1 1:2:4 as in Beams, cantilevers, bressummers, lintels over 1.5m span complete.

Use & waste for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc

S & F Vitreous China wash down water closet pan (pedestal pattern), white including fixing bolts, but excuding flushing cistern and flush pipe complete.

S & F 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets.

S & F white seat cover for pedestal pattern water closet including fixing bolts complet as in repair.

S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed. (Make : Jaguar/Parryware/Hindware)

S&F in repair 15 mm dia stop valves/angle valves, cast copper alloy, fancy type chromium plated with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe. (Make : Jaguar/Parryware/Hindware)

S & F C P rubber hose 15mm size with brass nuts of length 450 mm all as specified and as directed. (Make : Jaguar/Parryware/Hindware)

S & F Stack clamps out of flat iron, round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete.

M&L Mild steel TMT bars 10mm dia and over cut to lengh bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and incl MS (annealed) wire not less than 0.9mm dia.

Supplying and laying as in repair of CPVC pipes 20mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supplying and laying as in repair of CPVC pipes 25mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

Supplying and laying as in repair of CPVC pipes 32mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified or laid in floors concealed or open of any length including taking down or up existing GI tubing & connections all as specified and directed by Engr-in-charge.

M & L Ball brass valves 25 mm, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule

S&F 1000 Ltrs capacity Rotational Moulded ploythene water storage tank (cylinderical vertical with closed top) hoisted and fixed in position incl dismantling of existing tanks complete..

M & L Gun-metal, globe or gate valves of 25 mm bore with iron wheel head, screwed both ends for iron pipe and fixedor brass ferrule and fixed

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors and connecting with manholes or disposal place Make- Reliance,fnolex,Supreme, Kisan, Prince all as specified and as directed.

S & F 110mm dia bore PVC (SWR) bends Make-Reliance,finolex,Supreme, Kisan, Prince

Excavation in trenches exc 1.5m but n.exc 3.0m depth and n.exc 10 Sqm on plan in soft/loose soil and getting out complete all as spd and directed by EIC

S & F Vitreous China Urinal, Half stall type, white (including waste coupling and waste pipe) complete. (Make : Jaguar/Parryware/Hindware)

S & F Pillar taps15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type long shank, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed

Demolition and breaking up drain pipe (salt glazed stone ware, AC or reinforced concrete ) set in cement mortor any size internal dia of pipe complete all as specified and directed.

M&L DWC HDPE pipes class SN-8 laid and jointed complete as per manufacturer instruction in trenches of 150 mm ID/180 mm OD of pipe complete.

S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S&F Aluminium handles, cast type, anodised of size 150mm D Shape

S&F 100mm long aluminium anodised barrel tower bolt complete.

S&F Stainless steel butt hinges, medium weight cold rolled of size 75 mm .

M & L Rendering 10mm thick on ceiling surfaces in CM 1:3 finished even and fair without using extra cement.

M & L Preparation of old plastered surfaces and applying two coat of acrylic distemper in ceilings complete all as specified and as directed.

Supply only stainless steel wire cloth. 0.36 mm nominal dia of wire and average width of aperture 1.40mm complete

S & F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe complete.

S &F as in repair chromium plated Shower rose 15 mm size, 125mm long with 300 mm arms complete. (Make : Jaguar/Parryware/Hindware)

S & F CP rubber hose 15mm size with brass nuts of length 450 mm all as specified and as directed. (Make : Jaguar/Parryware/Hindware)

Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete.

Excavating over areas, exc 1.5 m deep but n.exc 3.0 mtr deep and getting out in soft/loose soil complete.

M & L Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in cement mortar 1:4 complete.

S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long

S & F PTMT Soap dish /tray

S&F Solid PVC factory made Door shutter of 30mm (style) consisting of frame made out of MS tubes for top bottom rails MS frame shall be covered with heat moulded plain coloured PVC 'C' channel having a PVC sheet strip 20mm width stuck inside with solvent cement for stilesa and plain coloured PVC sheets for top rail, lock & bottom rail on either sides & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beeding and jointed together with solvent cement as pere specification and drawing.

S&F 150mm long aluminium anodised barrel tower bolt complete.

M&L in replacement of AC wring concealed/surface wring complete with two single core PVC insulated unsheathed FR copper conductor 1100 volts grade, multistranded of size 4 Sqmm and incl drawn through and including non metalic rigid PVC conduit and conduit accessories of 20mm external dia and conduit accessories of ISI marks medium grade including 2.5 Sqmm copper wire for earth continuity wire and connected of comon earth dolly, all as specified including dismantling unseriveable sub main wiring and accessories. Note :-One run of conduit two run of 4 sqmm copper condictor & one run of 2.5 spmm copper conductor is measured as one unit.

Sub main wring complete with two runs of 6 sqmm single core PVC insulated unsheathed single core cable 1100 volts grade, multistranded with copper conductor drawn through and including 25 mm dia non metallic rigid PVC conduit and conduit accessories concealed in walls/roofs/floors etc., with one run of 4 Sqmm single core multistranded copper conductor as earth continuity conductor, all as specified including dismantling unserveable sub main wiring and acessories. Note :-One run of conduit two run of 6 sqmm copper condictor & one run of 4 spmm copper conductor is measured as one unit.

M&L Replacement of Sheet metal enclosure MCCB DBs, Triple pole & neutral 4 way with 200 Amp rated bus bar double door suitable for 01 No incoming MCCB of 125 Amp capacity and 12 Nos out going MCB SP complete all as specified and directed. Havells/L&T/ legrand. Note :-MCCB & MCB'S ARE MEASURED AND PAID IN SEPARATE ITEMS AND SAME MAKE.

Supply and fix sheet metal enclosure distribution board SPN, 8 ways 240 volts, with 200 amps rated bus bar, with IP 42 protection and double door, suitable for mounting MCBs all as specified and as directed including taking down old MCB DB complete.

Supply and fix MCB single pole and neutral, 240 volts, up to 40 Amps, all as specified and as directed.

Supply and fix MCB single pole , volts, up to 40 Amps, all as specified and as directed

S&F in replacement of MCCB 4 pole, 125 Amps with breaking capacity 16 KA, 415 volts complete all as specified and directed. Make : havells/L&T/ legrand

M&L Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter blow normal ground level connected to galvanized earth leath wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 pf MES sch pt I testing on completion with & incl. 15 mm bore light grade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete. (GI Pipe & GI wire beyond 7.5 mtr will be measured and paid respectively)

M&L Modular type single phase motor started 240 volt grade up to 25 Amos.

M & L Modular metal flush box for 1/2 module

M & L Modular white cover plate with frame 1/2 module

M&L Modular socket outlet 20 Amps 6 Pin 240 Volts twin socket heavy duty complete all as specified and directed metl flush box for 1/2 module.

M/S MAGADH CONSULTANT

M/s Vinay Kumar

M/S ABHAY KUMAR AND BROTHERS

M/S ASHOK KUMAR

M/S SHEO KUMAR SINGH AND SONS

MS HARI MOHAN GUPTA