PROVN OF TOILET AND BATHROOM AT OR LIVING ACCN OF HQ 134 WE AND OTHER SANCTIONED WORKS AT OAF UNDER GE 970 EWS

Amount

Surface dressing n.exc 15cm deep in soft/loose soil complete all as specified and directed.

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavation in trenches n.exc 1.50m wide and n exc 1.5m depth for foundation or for shafts, wells, etc and getting out in soft/loose soil complete all as specified and directed

Returning filling incl spreading leveling watering and well rammings in layers n exc 25cm complete all as specified and directed.

Removal of surplus soil n exc 50m and depositing where dirtected at a level n exc 1.5m above the starting point complete all as specified and directed.

M&L for cement concrete 1:4:8 type D-2 (40mm graded aggregate) in foundation, filling and mass concrete complete all as specified and directed.

RCC (1:2:4) type B-1 using 20mm graded stone aggregate in foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc. basement slabs, underreamed piles and mass concrete complete all as specified and directed

RCC (1:2:4) type B-1 using 20mm graded stone aggregate as in column, pier, post and struts complete all as specified and directed.

RCC (1:2:4) type B-1 using 20mm graded stone aggregate in beams, cantilevers, bressummers, Inlets complete all as specified and directed

M&L formwork for sides of concrete foundations, footing, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L formwork for sides of columns etc and similar work; vertical or to batter complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc complete all as specified and directed

M&L for RCC (design mix) M-25 (using 20mm graded aggregate) in foundation, including rafts, footing, foundation beams, plinth beams; bases for columns, etc. basement slabs, underreamed piles and mass concrete complete all as specified and directed.

M&L for RCC (design mix) M-25 (20mm graded aggregate) in Columns, piers, post and struts complete all as specified and directed.

M&L for RCC (design mix) M-25 (20mm graded aggregate) in beams, cantilevers, bressummers, Inlets over 1.5m span complete all as specified and directed.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

ditto- as above but 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious built in CM 1:6 complete all as specified and directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious built in CM 1:4 complete all as specified and directed.

Rendering 15mm thick on fare faces of brick work or concerete surfacec in CM 1:6, finished even and smooth without using extra cement complete all as specified and directed

M&L for 15mm thick Rendering on fair face of brick/concrete surface in CM 1:4 finished even and smooth without using extra cement using liquid WPC @ 200 ml per bag of cement complete all as specified and directed. Note - Rate of WPC shall deemed to be included in this unit rate.

Preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (OBD) over a coat of cement wall primer complete all as specified and directed.

Preparation of newly plastered surface of wall and applying two coats of cement based paint over a coat of alkali resistant primer complete all as specified and directed..

Structural steel work for roof truses, purlins, crane, gantries, rails incl distance pieces, cleats etc conforming to Fe 410 (Gde-E-250) quality B complete all as specified and directed.

Plate (plain or chequered) cut or notched (ordinary and counter sunk) with riveted, bolted or welded attachment conforming to Fe 410 (Gde-E-250) quality B complete all as specified and directed.

Mild steel bolts, purpose made, with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long with dia of neck 16mm to 20mm complete all as specified and directed.

Preparation of new steel surfaces on any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick any colour having tensile strength 550 Mpa as in roof coverings/cladding to wall, fixed with self tapping screws etc complete all as specified & directed.

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridge, hips , valley gutters, drip and straight flashing (length and girth as fixed), fixed with self tapping screws complete all as specified & directed.

Anodised aluminiun snap grid frame work for false ceiling of size 605mm x 605mm with and including 12mm thick gypsum board and G.I hanger 6 mm dia (upto 1200 mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40x3 mm size 60 mm long and expansion hold fasteners 12.5 mm dia. 40 mm long, complete all as specified and directed.

Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom raols. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail: panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as specified and directed.

Solid PVC solid door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, in opening as per specification & drawing complete all as specified and directed.

Powder coated anodised aluminium louvered ventilator made with hollow rectangular section of size 63.5mm x 25 x 1.5 mm including 4mm thick frosted glass and fixed with mosquito frame with jaali complete all as speicified and directed.

2nd class hardwood Plain, solid, straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplies and fixed, complete all as specified and directed.

Supply & fix pressed steel frames made out mild steel sheet 1.25 mm thick, with size of frame 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc and applying a shop coat of zinc chromate / red oxide primer including providing PCC 1:3:6 type C-0 using 12.5 mm graded crush stone aggregate for filling back of chowkhats complete all as specified and directed.

30mm thick flush shutters, solid core construction, with block bopard core and plywood face one face is covered with decorative face veneer with lippling/frame to match including cupboard partitions/shelves etc complete all as specified and directed.

S&F Box type Steel window (Factory made ) outer frame made out ERW tube 'P' section 65mmx45mmx25mm and shutters of ERW tube 'P' section 50mmx35mmx20mm openable (double) shutter with glazed openable shutter on (External side) and wire gauzed openable shutters on (Internal side) with steel pintal hinges, steel handle 100 mm long, mild steel tower bolt 02 Nos on each suhtter, stopper of 'Z' section and its locking arrangement at mild steel hook and eye including 0.6 mm dia nominal dia of stainless steel wire cloth avg width of aperture 1.40 mm dia and 4mm thick steel glass window and 4mm figured glass for ventilators all as specified and directed.. Note : The quoted rate against the above item shall also include :- (i) For provn of one shop coat of zinc chromate primer on all exposed steel surfaces and one coat tar on the ends of steel frame in contract with bricks/ concrete surface. (ii) 04 Nos MS Steel Lugs of 20x5mm MS flat 20cm long over all welded to frames (iii) PCC block for embedding lugs. (iv) 0.36mm dia SS wire mesh (v) 4mm thick sheet glass - for window. (vi) 4mm thick figured glass - for vent.

100mm size but hinges, medium weight cold rolled mild steel and fixed complete all as specified and directed.

Aluminium anodised cast type handle of size 150mm complete all as specified and directed.

Aluminium anodised barrel tower bolts of extruded section and fixed 200mm length complete all as specified and directed.

300 mm long aluminium alloy anodised sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of exturded sections or cast aluminium alloy, complete all as specified and directed.

Supply & fix floor door stopper 140mm long aluminium alloy body anodized with hard drawn steel spring complete all as specified.

Material & labour for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Demolition of cement concrete in ground floor and paving n. exc. 15cm thickness (below or above ground level) complete all as specified and directed.

M&L for hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.

75mm PCC 1:4:8 type D2 (using 40mm graded aggregate) as in sub base complete all as specified and directed.

75mm PCC 1:3:6 type C2 (using 40mm graded aggregate) as in sub base or hardstanding finished even and fair complete all as specified and directed.

Material & labour for 25mm thick PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate), as in leveling concrete in floor finished even & rough to receive top floor layer/finish complete all as specified & directed.

60mm thick machine pressed precast concrete coloured interlocking paver block of required shape and size confirming to IS 15658-2006 of M-35 Grade with grey cement and pigment laid over and including 25mm thick sand cushioning complete all as specified and directed.

Material & labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and directed.

Non-skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick screed bed in CM 1:4 complete all as specified and directed.

Glazed ceramic coloured tile for vertical surfaces of size 450mmx300mmx7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to matched including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

Providing precast cement concrete kerb stone/building blocks 10cm thick built in PCC 1:2:4 type B-1 (with plain or interlocking joints as directed) setting in cement mortar 1:4, complete all as specified and directed.

75mm PVC (SWR) pipe single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

110mm PVC (SWR) pipe single socketed, in any length with rubber ring joints. laid in trenches or in floors complete all as specified and directed.

110mm PVC (SWR) pipe single socketed, in any length with rubber ring joints. fixed to wall complete all as specified and directed.

PVC (SWR) bend any radius 75mm complete all as specified and directed.

PVC (SWR) bend any radius 110mm complete all as specified and directed.

PVC (SWR) vent cowl 75mm bore complete all as specified and directed.

PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement complete all as specified and directed.

Floor trap 75mm, plain with grating incl jointing with solvent cement complete all as specified and directed.

Grating doom 100mm dia of PTMT. (Min weight 25 gms) complete all as specified and directed.

1000 litre capacity, double layered, HDPE, rotational moulded polythylene water storage tank, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including Ball valve high pressure 20 mm bore of PTMT with epoxy coated aluminium rod high denisty plastic ball screwed for iron pipe and fixed complete all as specified and directed.

500 litre capacity, double layered, HDPE, rotational moulded polythylene water storage tank, ISI marked (cylindrical vertical with closed top) hoisted and fixed in position including Ball valve high pressure 20 mm bore of PTMT with epoxy coated aluminium rod high denisty plastic ball screwed for iron pipe and fixed complete all as specified and directed.

15mm bore stop valve (Minium weight of stop valve 90 gms) standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified and directed.

Angle valve 15mm bore, cast copper alloy, CP, screwed down high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

15mm bore bib taps, chromium plated, cast copper alloy with crutch or butterfly handle screwed down, screwed for pipe or for brass female and fixed complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet seat cover white and 10 ltr capacity flushing cistern with PVC connection 450mm long and connection to drain, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 360mm wide x 390mm high and 415 to 445mm long flexible pipe complete all as specified and directed.

Vitreous china bowl urinal flat back, size of 465 x 355 x 265 mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe) complete all as specified and directed.

Vitreous china squatting pan, 'Orissa' pattern, size 630 x 450 mm white with integral foot rest complete with P or S trap and including PVC flushing cistern 10 ltr capacity and flush pipe, PVC connection 450mm long complete all as specified and directed.

Vitreous china, wash hand basin, coloured, oval type of size 460 x 310 x 220 mm fixed on 20mm thick granite slab including brass chromium plated waste fittings and PVC waste pipe 32 mm bore, connection to water tubing, complete all as specified and directed..

PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

15mm bore brass CP mixer for WHB for mixing hot & cold water screwed down for iron pipe complete all as specified and directed.

Swivel shower PTMT with shower arm 195mm long with bend of 45 degree 15mm dia (minimum weight 40 gms) complete all as specified and directed.

Material & labour for granite (of any type) work, 18 to 20mm thick machine cut (table rubbed and polished) in steps jambs, pillars, window cills, cooking platforms, shelves in cupboard, handwash places and like including necessary cutting and grooving to walls and rounding to edge and making good including 10mm thick in cement mortar (1:3) screed bed or bedding layer and pointing with cement mortar (1:2) with admixture of pigment to match with shade of granite complete all as specified and directed.

Galvanised iron tubes 15mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Galvanised iron tubes 20mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc complete all as specified and directed.

Lagging to pipe of internal dia 20 mm pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842, complete all as specified and directed.

Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified and directed.

Material and labour for compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc. complete all as specified and directed.

20mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

Material & labour for salt glazed stone ware drain pipe Grade-A 150mm bore laid in trenches, jointed and tested as per IS-651-1980 complete all as specified and as directed.

M&L for reinforced concrete pipes, class NP2, internal daimeter 150 mm laid in trenches and jointed complete with collars all as specified and directed.

M&L for concrete bed to drain pipes of bore 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate including necessary shuttering and supports complete all as specified and directed Note:-(0) Thickness of bed below of pipe-10cm. (i) Width of bed-outer dia of pipe plus 30cm

Point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated multistranded, copper conductor cable (FRLS-H) drawn through and including PVC casing and caping (ISI marked) and accessories (fixed on wall/ceiling surfaces), terminated in and including pressed steel terminal boxes with plastic laminated backlite sheet top cover 3 mm thick (hylum) fixed with nickel polished screws with washers, earth continuity PVC cable(FRLS-H), copper conductor 1.5 Sqmm (nominal area) stranded with green insulation earth wire connected with earth dolly One light point / fan point / bell push point controlled by one way switch 5 Amprs and/or through regulator complete all as specified and directed.

All as per description of srl item No 89 here in before for 3/5 pin socket out let 5 Amps on independent board.

All as per description of srl item No 89 here in before but using 2.5 sqmm (nominal area) PVC stranded copper conductor cable with 1.5 Sqmm PVC insulated copper cable for continuous earth continuity conductor for 3 pin socket out let 15 Amps on independent board.

Switch piano flush type, 5 Amps, 240V AC, single pole, one way complete all as specified and directed .

Switch socket combination 2 in 1, 3 pin, 5 Amps 240 V AC flush type universal complete all as specified and directed.

Switch socket combination 5 in 1, 3 pin 5/15 Amps 240 V AC flush type universal complete all as specified and directed.

Ceiling rose 3 terminals complete all as specified and directed

Sheet metal enclosures for DB's with 200 Amp rated bus bar double door class IP-43 epoxy coated inside and outside 8 way SPN 240 volts complete all as specified and directed.

MCB SPN 63 Amp, 240 volts,10 KA, complete all as specified and directed.

MCB SP 6 to 32 Amp, 240 volts,10 KA, complete all as specified and directed.

PVC lamp holder, pin type with 1X9 watt LED lamp complete all as specified and directed.

1X20 watt 4 ft long LED Batten housing made of extruded alluminium with milky white diffuser and inbuilt electronic driver system lumen output should be at least 1800 lumen with a CCT of 6000 K, power factor should be greater than 0.95 complete all as specified and directed. make : Bajaj Cat part No : BCLSB 18 WH or equivalent in : /Philips/Wipro.

Supply and Fixing of exhaust fan 300mm sweep, heavy duty with speed of 900 rpm, metal body, single phase complete all as specified and directed.

Supply and Fixing of ceiling fan with blades, regulator and accessories 1200m sweep, metal body, single phase complete all as specified and directed.

Material and labour for earthing complete with galvanized steel plate electrode 60cm X60cm X6mm surrounded by charcoal & salt buried directly in a pit of depth not less than 1.5m below ground level with top edge of the earth plate at a depth of not less than 1.50m below ground level, connected to and including GI wire 4mm dia as earthing lead by means of bolts, nuts, check nuts & washers of galvanized iron, protected by galvanized steel pipe 15 mm bore (medium grade) upto 57.5m & connected to main control board including necessary excavation & earth work, disposal of surplus soil not exceeding 50m, in any type of soil. (The rate also includes for cost of charcoal & salt in alternate layers of 15 cm thickness, 20 mm bore GI pipe (medium grade) for watering, funnel, wiremesh, PCC chamber in cement concrete (1:3:6) type C-1, 20mm thick RCC(1:2:4) type B-1 cover & frame etc) including GI protecton pipe for earth lead complete all as indicated in electric plate No 3 of SSR 2009 Part I including testing complete all as specified and as directed.

Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 16 sqmm 2 Core laid in pipes or fixed to poles/walls with suitable saddle & glands complete all as specified and directed Note : Excavation & Earthwork shall be measured and paid separately.

Supply, laying and testing of XLPE insulated, armoured heavy duty electric cable with aluminium conductor ISI marked as per IS-7098 (Part-I), 1100 Volts grade, cross-sectional area 10 sqmm 2 Core laid in pipes or fixed to poles/walls with suitable saddle & glands complete all as specified and directed Note : Excavation & Earthwork shall be measured and paid separately.

Supply and Fixing galvanised iron tubes 25mm bore, medium grade including all fittings fixed to wall, ceilings and or laid in floors/tenches/under road etc complete for cable protection complete all as specified and directed.

Sand cushioning to underground cables 8cm thick before laying cable and 15cm thick after laying and streching the cable, complete all as specified and directed.. Note :- For payment purpose punned thickness shall be measured.

Brick well burnt locally available sub class 'B' laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable complete all as specified and directed.

25mm dia gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

PCC 1:2:4 type B-2 using 40mm graded stone aggregate as in surface channels, drains complete all as specified and directed.

Extra for forming fair finish to drain or channels 30cm internal girth in cement concrete using extra cement incl forms, moulds/mitred stopped ends in manholes etc complete all as specified and directed.

RCC 1:2:4 type B-1 using (20 mm graded crushed stone aggregate) but in landing cover slabs (for manhole etc) chullah hoods, chajjas, water trough, mangers, shelves and similar articles with plain face set in CM 1:4 complete all as specified and directed.

Material and labour for septic tank, excavated in any type of soil, foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame, vent shaft and sludge chambers etc for 50 users complete all as per drawing No CESZ/TD-1080/2011 sheet No 1/2 and 2/2 complete all as specified and directed.

Material and labour for septic tank, excavated in any type of soil, foundation in PCC 1:2:4, brick work in cement mortar 1:4, RCC slab cover including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame, vent shaft and sludge chambers etc for 10 users complete all as per drawing No CESZ/TD-1086/2011 complete all as specified and directed.

Material and labour for soakage well of size 3m x 3m deep, excavated in any type of soil, foundation in PCC 1:3:6 type C2, brick masonry in CM 1:4, RCC work in 1:1.5:3 (nominal mix) using TMT bar, loose filling with brick bats complete all as per drawing No CESZ/TD-1078/2011 sheet No 1/1 complete all as specified and directed.

Material and labour for soakage well of size 1.8m x 3m deep, excavated in any type of soil, foundation in PCC 1:3:6 type C2, brick masonry in CM 1:4, RCC work in 1:1.5:3 (nominal mix) using TMT bar, loose filling with brick bats complete all as per drawing No CESZ/TD-1078/2011 sheet No 1/1 complete all as specified and directed.

Material and labour for soakage well of size 1.3m x 3m deep, excavated in any type of soil, foundation in PCC 1:3:6 type C2, brick masonry in CM 1:4, RCC work in 1:1.5:3 (nominal mix) using TMT bar, loose filling with brick bats complete all as per drawing No CESZ/TD-1078/2011 sheet No 1/1 complete all as specified and directed.

Supply and fixing LED street light fitting 120 watts with high efficiency long life LEDs In-built replaceable electronic driver complete housed in pressure die-cast aluminium alloy covered with polycarbonate cover with IP65 degree of protection and fixing on existing bracket complete all as specified and directed. Make: Bajaj Cat No. ENXT P 120LED CR or latest upgraded equivalent model in Havells/ Wipro/Crompton Greave

Supply and fixing LED street light fitting 45 watts with high efficiency long life LEDs In-built replaceable electronic driver complete housed in pressure die-cast aluminium alloy covered with polycarbonate cover with IP65 degree of protection and fixing on existing bracket complete all as specified and directed. Make: Bajaj Cat No. ENXT P 45w LED CR or latest upgraded equivalent model in Havells/ Wipro/Crompton Greave

Supply and fixing LED post top light fitting made in cast aluminium with decorative opal polycarbonate diffuser with IP 65 protection 40 watts with high efficiency long life LEDs In-built replaceable electronic driver complete fixing on existing bracket complete all as specified and directed. Make: Bajaj Cat No. BGCL 40W LED WH or latest upgraded equivalent model in Havells/ Wipro/Crompton Greaves

Supply and erection of steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts, screws as specified type 410 SP-31 (9.0 mtr long) and shifting of conductors and insulators etc including painting the exposed portion of the pole with two coats of aluminium paint over a coat of red oxide primer and internally through out plus embedded portion with two coats of black bituminous paint over a coat of red oxide primer. Marking of pole number with black paint in yellow circle complete all as specified and directed.

PCC 1:3:6 type C-1 using 20mm graded stone aggregate as in coping of pole, complete all as specified and directed.

M&L GI Pipe Bracket made out of Galvanised Iron Tubing 40mm bore (dia), light grade, 1.20 Metre long bent to shape as per specified for fixing Street Light Fitting including suitable size of clamps complete all as specified and as directed.

Street light junction boxes IP 66 protected “halogen free and weather proof” suitable for out door type ( with metric knockouts for cable entry) of size 200 x 150 x 100 mm including necessary suitable fixing clamps made up of GI flat 32mm x 6 mm including GI nut and bolt complete all as specified & directed. Makes : Sintex / National/ Hensal

Sheet metal enclosure DB SPN 4 Way 415 V double door complete all as specified & directed.

MCB 40 Amps SPN 10 KA braking capacity C curve complete all as specified & directed.

MCB 20 Amps SPN 10 KA braking capacity C curve complete all as specified & directed.

M/S IEE BEE CONSTRUCTIONS

FIRDOUS AHMAD BABA

M/S Haji Zahoor Hussain Ganai

M/S NEW JOHAN TRADERS