COMPREHENSIVE REPAIR FOR JCO AND OR MD ACCN IN RAJENDRA LINE, OLD MAP AND NEW MAP UNDER AGE B/R II AT PATIALA MIL STN AT OLD CANTT

Amount

'Notes: (i) Please refer Schedule 'A' Notes of tender documents.

Dismantling floor hearth wall tilling incl Cement mortar (beading bud not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified and directed by Engr-in-Charge.

M&L for anti-skid premium quality coloured tiles 400 X 400 mm and 7-8 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc, complete all as specified and directed by Engr-in-Charge.

M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over pointed in white cement with pigment to match the colour of tiles complete all as specified.

M&L 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

M&L for single charge, Ceramic, stain & scratch resistant, joint free, premium quality coloured tiles 600 X 600 mm and 8-10 mm thick, as in floors/skirting etc. in any pattern of light & dark tiles as approved, set and jointed pointed in white or coloured cement to match,in floors etc. complete all as specified.

M&L 15 mm thick screed in cement mortar (1:6) over and pointed in white cement with pigment to match the colour of tiles complete all as specified and directed by Engr-in-Charge.

Taking up or down existing steel tubing and connections, 15mm bore complete all as specified and directed by Engr-in-Charge.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-Charge.

Taking up or down existing steel tubing and connections, 20mm bore complete all as specified and directed by Engr-in-Charge.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specified and directed by Engr-in-Charge.

S&F in repair overhead shower 125 mm dia with 235mm long shower arm and incl all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F in repair angular Stop Cock with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F pillar taps, fency type, long neck, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for 15mm bore of iron pipe and fixed in repairs complete all as specified and directed by Engr-in-Charge.

S&F in repair Bib taps, CP, fancy type long nose with wall flange screwed for 15mm bore of iron pipe or for brass ferrule and fixed in position incl taking downcomplete in all respect complete all as specified and directed by Engr-in-Charge.

S&F in repair including taking down central hole brass chromium plated basin mixer with regular spout with/without popup waste system with 450 mm long braided hoses complete all as specified and directed by Engr-in-Charge.

S&F in repair for wall mounted mixer assembly, brass chromium plated, comprising of centre outlet tap, double inlets for hot & cold water, non telephonic shower arrangement, with connecting legs & wall flanges, inlets suitable for 15mm bore connections incl taking down complete all as specified and directed by Engr-in-Charge.

S&F Sink Cock wall mounted with swinging spout and with wall flange, fency type chromium plated cast copper alloy screwed down, high pressure, screwed one ends for 15mm bore of iron pipe or for union and fixed in position in repair complete all as specified and directed by Engr-in-Charge.

S&F Concealed Stop Cock, fancy type, CP with long shank and cup, exposed part kit with wall flange, fitting sleeve, operating lever, adjustable wall flange and including regular brass body of concealed stop cock suitable for 15mm line with protection cap fixed in position in repair complete all as specified and directed by Engr-in-Charge.

S&F vitreous china premium/1st quality wash basin, white/ivory/off white, flat back, size 500x400 mm including pedestal, screws & plug and brackets etc. all accessories as recommended by manufacturer incl. with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union and incl 32mm brass CP waste coupling and completein all respect as per manufacturer's instructions and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F in repair 5mm thick looking mirror fixed to wall with stainless steel plugs/connecter/spacers/screws aluminium bedding on sides etc. chrome finish with aluminium bedding on sides over 3mm ply, etc.complete fixed in position all as specified and directed.

S&F in repair including taking down soap dish, stainless steel of suitable size to accommodate soap, tooth brush glass and tooth paste complete all as specified and directed by Engr-in-Charge.

S&F (in repair) stainless steel plate rack size (900x900mm) of standard size, weight not less than 5kg, complete all as specified and directed by Engr-in-Charge.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dward wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm blowl size 410 x 330 x 160mm complete INCL WASTE COUPLING OF PTMT OF BORE 32 MM AND WASTE PIPE complete all as directed.

S&F in repair vitreous china premium/1st quality wash down water closet pan floor mounting (pedestal pattern/EWC) white/ivory including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc incl. plastic seat cover as recommended by manufacturer closed pattern with flat bottom and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and complete in all respect all as specified.

S&F in repair flushing cistern of PVC 10 ltr. cap. with dual flushing system, valveless syphonic action type, low level, white/ivory/off white with inlet, ball valve, float and including brackets and connection to pipe etc. and incl all necessary accessories like rag bolts/gel gasket etc as recommended by manufacturer for fixing, packing and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F vitreous china premium/1st quality squatting pan (Orissa pattern/IWC) white colour of size 580mmx440mm including connection to drain (or out going pipe) and to flushing pipe, antisyphonagee pipe,etc.,with flush pipe and incl. all necessary accessories as recommended by manufacturer for fixing, packing and including and taking down existing of any description/size complete all as specified and directed by Engr-in-Charge.

S&F in repair including taking down health faucet (ABS Body) with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair PVC connections 15mm size with brass nuts of length 600mm complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel grating 150 mm dia size shaped with cockroach trap for floor trap fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair 75mm bore pipe Stack clamps out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed by Engr-in-charge.

M&L PVC(HDPE) SWR , 110 mm bore, single socketed in any length with rubber ring joints using solvent cement as per maunfacture instruction, fixed to wall complete all as specified including fixing of pipe to wall with flat iron clamp of size 25x3mm, bolts washers, nuts, nails etc, after taking down existing damaged rain water pipe complete all as specified and directed by Engr-in-Charge.

M&L PVC (SWR) bends/tees of any radius for 110mm bore with access door as in repair complete all as specified and directed by Engr-in-Charge.

M&L cast iron soil, waste and vent pipe, Centrifugal type 100mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and directed by Engr-in-Charge including taking down of existing unserviceable pipe.

M&L cast iron soil, waste and vent pipe, Centrifugal type 75 mm bore, spun cast in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and directed by Engr-in-Charge including taking down of existing unserviceable pipe.

M&L cast iron multifloor trap 100 mm dia including jointing with solvent cement in repair complete all as specified and directed by Engr-in-Charge.

S&F cast iron juction combination 'T' equal or unequal for 100mm bore with access door as in repair complete all as specified and directed by Engr-in-Charge.

S&F CI nahani trap incl jointing to waste pipe in neat cement 100mm dia fixed in cement concrete (1:2:4) type B1 complete all as specified and directed by Engr-in-Charge.

M&L for cast iron cowl of 100mm dia complete all as specified and directed by Engr-in-Charge.

Taking down chowkhats or frames (without taking off shutters from the frame) n. exc 1.5 Sqm incl cutting holes and making good to disturbed surfaces completeincluding reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.

Supply and fixing factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet , reinforced with steel square tube, complete all as specified and directed by Engr-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement , including supplying & fixing in the frame with 3 Nos Stainless Steel butt hinges complete all as specified and directed by Engr-in-Charge including supply and fixing the following items: (a) PVC Butt Hinges 150mm - 3 nos per leaf. (b) PVC Tower Bolt 200mm long - 2 nos per leaf (c) PVC Handles 150 mm - 2 nos per leaf

Taking down chowkhats or frames (without taking off shutters from the frame) exc 1.5 Sqm and n. exc 4.00 Sqm incl cutting holes and making good reqd shape for hold fast block for new frame complete all as specified and directed by Engr-in-Charge.

Taking down Shutters of any description exc 1.00 sqm and not exc 2.00 sqm each complete all as specified and directed by Engr-in-Charge.

S&F Factory made Pressed steel frames made of size 105 x 60mm of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified, and directed by Engr-in-Charge.

S&F Factory made Pressed steel frames made of size 125 x 60mm of MS sheet of 1.20 mm thickness for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified, and directed by Engr-in-Charge.

M&L cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in holdfast blocks/ filling in chowkats complete all as specified and directed by Engr-in-Charge.

S&F factory made flush shutters 35mm thick minimum 5 ply, solid core construction, with block board core and plywood face panels, commercial type on both sides with 6mm thick lipping frame to match complete all as specified and directed by Engr-in-Charge including supply and fixing following items : (a) Mild Steel Finished Butt Hinges 150mm - 4 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16 x 300mm - 1 No per leaf (e) Stainless Steel (304 Grade) Finished Floor Door Stooper - 1 No per leaf

S&F 35mm thick glazed and skelton shutters of 2nd class hard wood (factory made) open rebated and divided to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutter as specified in SSR-91 Pt-1 section 8 clause 8.20(a), kiln seasoned and chemically pressure treated all as specified including stainless steel 304 Grade wire cloth (wire dia. 0.36mm) complete all as specified and directed by Engr-in-Charge and the supply and fixing following items: (a) Mild Steel Finished Butt Hinges 150mm - 3 Nos per leaf (b) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 Nos per leaf (c) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 Nos per leaf (d) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop 16x300mm - 1 No per leaf

M & L for PVC door cill of width 30mm with rubber beading complete all as specified and directed

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in-Charge.

M & L for Powder coated (Minimum thickness of powder coating 50 micron ) Anodised aluminium frame for doors, windows, ventilators, cupboards with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer-in-Charge.

M & L for Aluminium window and ventilator, cupboards shutters with 50 micron powder coating double shutters made and to be fixed with EPDM gasket to render the glazing, air and water tight etc. and aluminium beeds in inner shutters complete fixed in all respect as specified & directed by Enginner-in-Charge. Note :- EPDM gasket shall be measured as supply only separately

S&F 4mm thick tinted glass for aluminium windows including EPDM gasket to render the glazing, air and water tight etc and power coated aluminium beeds 20 mm size complete.

S&F stainless steel wire gauge 0.36 mm nominal dia of wire and average width of aperture 1.40mm to be fixed in Powder coated aluminium windows/ ventilators etc complete.

S&F stainless steel (304 grade) finished butt hinges 75mm complete all as specified and directed.

S&F powder coated aluiminium tower bolt 100mm long complete.

S&F powder coated aluminium handles 150mm complete.

S&F powder coated aluminium hook and eye of suitabel length adjustable to aluminium window shutters compelte.

S&F 5mm thick frosted glass fixed to aluminium ventilator including necessary EPDM gasket to render the galzing, air and water tight etc and powder coated aluminium beeds 20mm sized complete.

M&L Black colour Granite 17-18 mm thick (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like including 10 mm thick rendering in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rounding, molding and polishing on edges complete all as specified and directed by Engr-in-Charge.

Dismantling of boarding of any type/size as in CB/wardrobes or fixed in any position in hardware (if any) etc complete all as specified and directed by Engr-in-Charge.

S&F 18 mm thick HDMR board of both side plain white colour fixed with screws, solvent cement/ adhesive to make kitchen/bed rooms cabinet sides top and bottom and shelves inside the cabinets complete as per manufacturer’s specifications complete all as specified and directed.

S&F 18 mm thick HDMR board of single side rigid laminate of approved colour and other side plain white colour fixed with ss screws and solvent cement/ adhesive to make kitchen cabinet, cupboard shutters and shelves complete as per manufacturer’s instructions complete all as specified and directed.

S&F 12 mm thick HDMR Board fixed with ss screws and solvent cement/ adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete as per manufacturer’s specifications complete all as specified and directed.

S&F auto closing hinges 35 mm of 0 crank( KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F Ball bearing runners 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed by Engr-in-Charge.

S&F Piano/continuous hinge of size 20 mm stainless steel complete all as specified and directed.

S&F tower bolts 150mm long of stainless steel 304 finished/of outer plate metal matt finished complete all as specified and directed by Engr-in-Charge.

S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturer's instructions complete all as specified and directed by Engr-in-Charge.

S&F D-type cabinet handles premium quality, stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP glass self corner/center complete all as specified and directed by Engr-in-Charge.

S&F in repairs CP towel rail 60 mm long complete all as specified and directed by Engr-in-Charge.

S&F in repairs PVC cabinet mirror complete all as specified and directed by Engr-in-Charge.

Demolition of brick work or stone/boulder masonary built in cement mortor including all quoins,arches,pillars etc complete all as specified.

M&L Brick work with sub class 'B', old size bricks, designation 100, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster of any description, any thickness from external surfaces of walls/soffits etc. incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engr-in-Charge.

M&L for cement plastering 10mm thick in cemet mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for cement plastering 15mm thick in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces complete all as specified and directed by Engr-in-Charge. Note : WPC will not be measured and paid separately.

M&L for cement plastering 5mm thick in cemet mortar 1:3 as on ceilings or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

Preparation of plastered surfaces of walls etc. and applying two coat of cement base paint over a coat of chalk whiting (as primer) complete all as specified and directed by Engr-in-Charge.

Preparation of plastered surfaces of Ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

Preparation of plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whiting priming paint complete all as specified and directed by Engr-in-Charge.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed by Engineer-in-Charge.(Payment for providing grooves shall be made separately).

M&L Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

Preparation of old surfaces of walls and applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge.

Preparation of old surfaces of ceiling and applying one coat of oil bound distemper complete all as specified and directed by Engr-in-Charge.

M&L for preparing new wood & wood based surfaces of any description, not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in-Charge.

S&F in repair stainless steel tubing of 25 mm dia chromium plated min. 1.0 mm wall thickness as in curtain rod complete incl S&F 02 Nos stainless steel brackets/finials fency type, stops fixed with ss screws etc complete all as specified and directed by Engr-in-Charge. Note : For the purpose of mesurement and payment running length of curtain rod only shall be considered.

S&F in repair PTMT Jet Spray with 1.5 metre long flexible tube including making connections and fixed in position complete all as specified and directed by Engr-in-Charge.

S&F in repair 450mm long glass shelf for wash basin. Fixed in position complete all as specified and directed by Engr-in-Charge.

S&F rotational moulded polyethylene water storage tanks 500 ltrs incl 20mm float valve, 20mm union, tank nipple 20mm and dismantling old one complete all as specified and directed by Engr-in-Charge.

M&L for repair to RCC ceiling, sunshades, Chajjas, Balconies, Columns, bands, beams, roof slab and similar RCC work at any position/height by dismantling loose/disintegrated portion and dubbing out with Cement Concrete 1:1½:3, 15mm to 50mm thick using 6 to 12mm graded stone aggregate to make up and finished to required shape including provision of necessary supports if required and stitching of cracks with mild steel U clamps made out of 8mm dia @ 150mm c/c with inserting concrete block stretcher with cement mortar 1:3 mixed with adhesive chemical (Polymer based) and reinforced with PVC chicken mesh including form work where ever required and finished with10 mm thick plastering in CM 1:4 finished even and fair without using extra cement including preparation of surfaces to receive finishes complete all as specified and directed by Engr-in-Charge. Note : The extra area of 300mm around the actual affected area will be checked and repaired and only repaired portion will be taken for measurement.

S&F Framed work such as grills, cooler stands gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed by Engr-in-Charge.

M&L for preparing steel and iron surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

M&L 4 mm thick tinted glass ordinary quality and glazing with oil putty in spare not exceeding 0.5 sqm in each pane as in repair and complete all as specified and directed by Engr-in-Charge.

M&L 4 mm thick sheet glass ordinary quality and glazing with oil putty in spare exceeding 0.5 sqm in each pane as in repair and complete all as specified and directed by Engr-in-Charge.

S&F 32 mm bore PVC waste pipe for sinks, wash basins, urinals etc. of length 450 to 900 mm complete all as specified and directed by Engr-in-Charge.

Taking down carefully existing points wiring on surface conduit/concealed conduit for light/ fan/socket /power/ bell from wall & roof along with fitting and fixtures such as switches, sockets, ceiling roses, batten holders, unserviceable light fittings, piece of wires,gutties, conduit, wooden boards etc and making good the disturbed portion of all floor, ceiling etc all as specified and directed.

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH(FLAME RETARDANT LOW SMOKE AND HALOGEN) single core multi-stranded copper conductor for one light/fan and including PVC rigid concealed conduit medium grade 19/20 mm dia, chesing and cementing work to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment required for fitting of flush and junction boxes all as specified and directed (Switches and regulators shall be measured and paid for separately.) ( Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring)

All as per Sl item No 99 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed. Make of Wire: Havells/Finolex/Polycab

All as per Sl item No 99 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.Make of Wire: Havells/Finolex/Polycab

All as per Sl item No 99 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 2.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed. Make of Wire: Havells/Finolex/Polycab

M & L for point wiring with 1.5 sqmm PVC insulated and unsheathed FRLSH(FLAME RETARDANT LOW SMOKE AND HALOGEN) single core multi-stranded copper conductor for one light/fan in existing conduit to be terminated in pressed steel terminal boxes with top cover plate including 1.5 sqmm PVC insulated and unsheathed FRLSH single core multi-stranded copper earth continuity conductor controlled by one switch and/or one regulator complete including repairing the surfaces in CM 1:3 and finishing the surface as per existing treatment all as specified and directed. (Switches and regulators shall be measured and paid for separately.) (Wiring shall be done as per colour code in IS for phase, neutral and earth) (In case of Modular: Modular cover plate and metal flush boxes incl in Point wiring). NOTE:-1.The contractor must produce certificate of FRLSH wire as well as on site testing of FRLSH wire. .

All as per Sl item No 103 above herein before but one 5Amp socket point on independent board but with other switches complete all as specified and directed.

All as per Sl item No 103 above herein before but one socket out let 5 pins 5 Amp on the same board but with other switches complete all as specified and directed.

All as per Sl item No 103 above herein before but one socket out let 3 pin 15 Amp Independent with 2.5 sqmm wire including 1.5 sqmm PVC insulated and unsheathed FRLS single core stranded copper earth continuity conductor complete all as specified and directed.

S& F Modular switch 1 way, 6 Amps, 1 module complete all as specified and directed.

S & F Modular switch 1 way, 16 Amps, 1 module with indicator lamp complete all as specified and directed.

S & F Modular socket 5 pin 6 Amps, 2 module complete all as specified and directed.

S & F Modular socket 5 pin 6/16 Amps, combination type 2 module complete all as specified and directed.

S & F fan regulator modular type 2 module 6 step complete all as specified and directed.

S&F ceiling rose surface bakelite surface 65 x 50mm 3 terminals all as specified & directed.

S& F Modular Bell switch 1 way, 6 Amps, 1 module complete all as specified. ABB/Havells/Legrand/Ave-Anchor/Schneider

Suppy and fix bell ding dong type AC 230 volts complete all as specified and directed.

S&F incl taking down 20 watt wall mounted, new generation LED batten fitting 4 feet with polycarbonate diffuser andextruded thermoplastic body > 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500/3000 K with CRI of LED >90 . including all fixing accessories & connecting up with PVC insulated twin core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F MCB DB double door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for 8 ways with IP43 protection complete all as specefied and directed. (Note: MCB should be C curve as directed by engineer in charge)

S&F MCB , SPN, 240 Volt , 40 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCB should be C curve as directed by engineer in charge).

S&F MCB, single pole 240 volts 6 to 32 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: MCB should be C curve as directed by engineer in charge)

S&F MCB, single pole 240 volts 40 to 63 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: MCB should be C curve as directed by engineer in charge)

S&F MCCB DB VTPN 4 WAYdouble door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for ways with IP54 protection complete all as specefied and directed. (Note: MCCB should be C curve as directed by engineer in charge)

S&F MCCB DB VTPN 4 WAYdouble door 240 volts with 200 Amps standard bus bar of suitable size and common neutral link all enclosed in standard sheet flush mounting type, drilling holes for incoming and out going cables complete suitable for ways with IP43 protection complete all as specefied and directed. (Note: MCCB should be C curve as directed by engineer in charge)

Supply and fix metal clad Box of single phase 220V with built in socket and plug of capacity 20 amp complete all as specified and directed.

S&F MCCB , TPN, 240 Volt , 125 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCCB should be C curve as directed by engineer in charge)

S&F MCCB , TPN, 240 Volt , 63 to 100 amp for fixing in DBs of including proper thimble connections complete all as specified and directed. (Note: MCCB should be C curve as directed by engineer in charge)

Earthing complete with galvanised steel earth plate electrode, 600x600 x 6.0mm thick buried directly in ground(earth pit not less than 2.25m deep below normal level) connected to galvanised earth lead wire 4.0mm dia by means of nuts, bolts, & washers of GI as shown in electrical plate No 3 of SSR Part I. Connected to earthing test point testing complete including necessary earth pit chamber PCC 1: 3: 6 type C1, and 50mm thick RCC 1 : 2: 4 chamber cover and with 8mm dia mild steel re-enforcement of 15Cm C/C spacing both ways with a handle made of 8 mm bar for fitting, galvanised iron funnel, wire mash watering pipe GI 20 mm dia light grade, and protection to earth lead shall be provided with GI pipe light grade 15mm dia up to 7.5m from the earth plate electrode, excavation, charcoal and common salt mixed refilling of soil etc complete all as directed. Test Sheet having Earth resistance value less than 3 ohm will be submitted by contractor.

M & L for Sub main wiring with two single core 6.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 6 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 6.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 6 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 4.0 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 4 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 4.00 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 4 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 2.5 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 2.5 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 2.50 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 2.5 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

M & L for Sub main wiring with two single core 1.5 Sqmm PVC insulated and unsheathed FRLSH ,stranded copper conductor cable drawn through PVC concealed conduit 25 mm dia including 1.5 Sqmm PVC insulated unsheathed FRLSH stranded copper conductor cable as earth wire all as specified and directed by Engineer-in-charge. Note 1:- 2 Runs of 1.50 Sqmm Copper conductor cable, 1 Run of PVC conduit & 1 Run of 1.5 Sqm Copper conductor Earth wire shall be measured as one unit) Note 2 : Rate quoted for this items shall be inclusive of the cost of (i) Rigid non-metallic PVC conduit of 25 mm dia with tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc. (ii) Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to match the existing surfaces, cutting not exc. 10 cm girth . (iii) Taking out/down existing unserviceable sub main wiring.

Supply and fix incl taking down new generation energy saving 9/10 watt LED bulk head (porch light fitting) made of plasitic housing with opal diffuser With IP 65. having correleted color temperature(CCR) of Emmiting light 6500/3000 K with CRI of LED >90. connection with PVC insulated twin core flexible copper conductor cable of suitable size.complete all as specified and directed.

M&L switch piano flush type single pole, one way 6amp complete all as specified and directed.

M&L switch piano flush type single pole, one way 15 amp complete all as specified and directed.

M&L socket outlet piano flush type 2 in 1 3 pin 5 amp complete all as specified and directed.

M&L socket outlet piano flush type 3 pin 15 amp complete all as specified and directed.

S/fix fan regulator electronic socket type complete all as specified and directed.

S&F modular white/grey cover plate with frame, 1 module/2 module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 3/4module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 6 module complete all as specified and directed.

S&F modular white/grey cover plate with frame, 8 module complete all as specified and directed.

S&F Metal Flush boxes 1/2 module complete all as specified and directed.

S&F Metal Flush boxes 3/4 module complete all as specified and directed.

S&F Metal Flush boxes 6 module complete all as specified and directed.

S&F Metal Flush boxes 8 module complete all as specified and directed.

Supply and fix batten holder including flexible wire complete all as specified and directed.

S&F incl taking down 12 watt LED Bulb with base cap B22/E27 type minimum 90 lumen/watt having correleted color temperature(CCT) of Emitting light 6500 /3000 K with CRI of LED >90 complete all as specified and directed.

S/Fix in replacement of old MCB DB TPN 4 Way with 200Amp standerd bus bar factory made IP 43 protection class metal double door with Shrouded Neutral Bar & Pan assembly with connecting link complete including Provision for fixing one MCB TPN upto 125A complete all as specified and directed. (MCB TPN will be measured and paid separately under respective items of sch A)

S&F MCB TPN 240 volts 63 to 100 Amp capacity fixing in DB’s including proper thimble connections complete all as specified and directed. (Note: TPN should be C curve as directed by engineer in charge)

Supply and fix incl taking down Led Stellar Square/round SURFACE Mounted Asthetically designed energy saving LED LIGHT for indoor application of capacity 10 watt having correleted color temperature(CCR) of Emitting light 6500 OR 3000 K(According to requirement) with CRI of LED >90.complete with all electrical connection with PVC insulated twin core flexible copper conductor cable 0.75X2 Sqmm with proper clamps.complete all as specified and directed.

Supply and fix incl taking down outdoor decorative LED Post top lantern with spun aluminium die cast Housing cum heat sink PMMA diffuser in IP65 fitted LED lightf of capacity 20 watt. complete all as specified and directed.

Supply and fix LED active power factor correction (APFC) electronic gear (electronic driver) suitable for 25 watt LED light fitting O/P current upto .6A output voltage 23-36V power factor >.90 complete all as directed.

S&F PVC insulated copper conductor 3 core 1.5sqmm passing through flexible PVC conduit and fixed with clamp. complete all as specified and directed. NOTE:-cable and flexible conduit both included in quoted rates.

S&F Alluminium armoured cable 2 core 6 sqmm with PVC insulated.fixed with clamps complete all as specified and directed.

Supply and fix in replacement of 12 watt LED light fitting decorative type wall mounting fixture including LED lamp compact and energy efficient epoxy powder coated luminaire, white metal swing Arm Wall lamp with Bulb and connecting with copper conductor flexible cable from ceiling rose to conector of the light complete all as specified and directed by Engr-in-charge.Make Philips/Havells or equivalent

SWAMI ENGINEERS (BID ID -3410950)

ANIL KUMAR AND CO (BID ID -3416457)

HARJIT CONTRACTS (BID ID -3422370)

Jawandha Enterprises (BID ID -3417200)