8272 REPAIR/MAINT ALL TYPE OF STEEL FURNITURE ITEMS OF OTM ACCN OF ALL UNITS UNDER GE (CENTRAL) PUNE

Amount

Material and labour for preparation of old painted steel surfaces including dent/ bends, welding of joint if required, scrapping and cleaning the surfaces and applying synthetic enamel paint with spray gun to a uniform finish of approved colour/ shade to almirah large steel with shelves complete all as specified and as directed. (Drawing No.FD-1031/ FD-67)

Material and labour for preparation of old painted steel surfaces including dent/ bends, welding of joint if required, scrapping and cleaning the surfaces and applying synthetic enamel paint with spray gun to a uniform finish of approved colour/ shade to almirah large steel 1/2H x 1/2S with shelves complete all as specified and as directed. (Drawing No.FD-1033)

Material and labour for preparation of old painted steel surfaces including dent/ bends, welding of joint if required, scrapping and cleaning the surfaces and applying synthetic enamel paint with spray gun to a uniform finish of approved colour/ shade to almirah medium steel with shelves complete all as specified and as directed. (Drawing No.FD-1032)

Material and labour for preparation of old painted steel surfaces including dent/ bends, welding of joint if required, scrapping and cleaning the surfaces and applying synthetic enamel paint with spray gun to a uniform finish of approved colour/ shade to locker steel complete all as specified and as directed. (Drawing No.FD-257/ FD-1029)

Material and labour for preparation of old painted steel surfaces including dent/ bends, spot welding of joint if required, scrapping and cleaning the surfaces and applying synthetic enamel paint with spray gun to a uniform finish of approved colour/ shade to book case steel complete all as specified and as directed. (Drawing No.FD-1028)

Removing old unserviceable lock from steel almirah large and medium and supply and fix for new lock mild steel with key in duplicate complete all as specified and as directed. (Drawing No.FD-1031, FD-1032, FD-1033, FD-67)

Removing old unserviceable handle from steel almirah large and medium and supply and fix for new handle 100mm size mild steel chromium plated complete all as specified and as directed. (Drawing No.FD-1031, FD-1032, FD-1033, FD-67)

Supply and fix for MS clamps made out of 25mm x 3mm flat iron, 150mm long and fixed without bolts/ welded to support the shelving (each shelf) for almirah steel large and medium complete all as specified and as directed. (Drawing No.FD-1031, FD-1032, FD-1033, FD-67)

Removing old damaged hinges and supply and fix for mild steel 75mm size hinges to steel almirah large, medium, steel locker by welding to make them smooth functional complete all as specified and as directed. (Drawing No.FD-1031, FD-1032,FD-1033, FD-257 FD-1029)

Removing old unserviceable locking arrangement alongwith complete set of iron rod of almirah steel large with shelves and supply and fix for new locking arrangement alongwith complete set of iron rod complete all as specified and as directed. (Drawing No.FD-1031/ FD-1033)

Removing old unserviceable locking arrangement alongwith complete set of iron rod of almirah steel medium steel with shelves and supply and fix for new locking arrangement alongwith complete set of iron rod complete all as specified and as directed. (Drawing No.FD-1032, FD-1034)

Removing old unserviceable handles and supply and fix for handle 100mm size mild steel chromium plated to steel lockers to match the existing complete all as specified and as directed. (Drawing No.FD-257, FD-1029)

Removing old unserviceable hasp and staple and supply and fix for new 75mm size mild steel chromium plated hasp and staple to steel locker to match with the existing complete all as specified and as directed. (Drawing No.FD-1029)

Removing old damaged/ unserviceable foot rest of steel almirah large and 1/2H x 1/2S and supply and fix for new mild steel foot rest of same size complete all as specified and as shown on drawing. (Drawing No.FD-1031, FD-1033)

Removing old unserviceable hanging rod and supply and fix for new mild steel chromium plated hanging rod to steel locker to match with the existing complete all as specified and as directed. (Drawing No.FD-1029)

Removing old unserviceable top of table 3' x 3' steel and supply and fix for new top made out of 18mm thick prelaminated particle board exterior grade one side decorative teak finish and other side balancing white with 6mm thick first class teak wood edging duly polished and painted the steel frame with one coat of synthetic enamel paint colour and providing 04 Nos hard rubber shoes complete all as specified and as shown on drawing. (Drawing No.FD-1009)

Removing old unserviceable top of table 3' x 2' steel with drawer and supply and fix for new top made out of 18mm thick prelaminated particle board exterior grade one side decorative teak finish and other side balancing white with 6mm thick first class teak wood edging duly polished and painted the steel frame with one coat of synthetic enamel paint colour and providing 04 Nos hard rubber shoes complete all as specified and as shown on drawing. (Drawing No.FD-1008)

Removing old unserviceable top of table 3' x 2' steel without drawer and supply and fix for new top made out of 18mm thick prelaminated particle board exterior grade one side decorative teak finish and other side balancing white with 6mm thick first class teak wood edging duly polished and painted the steel frame with one coat of synthetic enamel paint colour and providing 04 Nos hard rubber shoes complete all as specified and as shown on drawing. (Drawing No.FD-1007)

Removing old damaged/ unserviceable foot rest of steel almirah medium and supply and fix for new mild steel foot rest of same size complete all as specified and as shown on drawing. (Drawing No. FD-1032, FD-1034, FD-1031)

Removing old unserviceable table top of table office clerk steel and supply and fix top of size 1220mm x 710mm x 18mm thick prelaminated particle board exterior grade with one side decorative teak face and other side balancing white ISI marked with 1st class teak wood beading 5mm thick alround as in table top duly polished with french polish complete all as specified and as directed. (Drawing No.FD-84/ FD-1004)

Removing old unserviceable table top of table office officers steel and supply and fix top of size 1370mm x 760mm x 18mm thick prelaminated particle board exterior grade with one side decorative teak face and other side balancing white ISI marked with 1st class teak wood beading 5mm thick alround as in table top duly polished with french polish complete all as specified and as directed. (Drawing No.FD-84(M)/ FD-1003)

Removing of unserviceable lock from table office clerk and table office officers steel and supply and fix for new lock of approved quality as per existing complete all as specified and as directed. (Drawing No.FD-84(M)/ FD-1004/ 1003)

Removing old unserviceable shelves of steel almirah large and supply and fix for new shelf including painting to the same complete all as specified and as directed. (Drawing No. FD-1031)

Removing old unserviceable shelves of steel almirah medium and supply and fix for new shelves including painting to the same complete all as specified and as directed. (Drawing No. FD-1032)

Taking down old/ damaged plywood top and supply and fix for 12mm thick commercial ply BWR grade to the bed hard with plywood top complete all as specified and as directed. (Drawing No.FD/E-6/MAP/08R)

Material and labour for preparation of old painted steel surfaces including spot welding, dent/ bends, scrapping and cleaning the surfaces and applying synthetic enamel paint with spray gun to a uniform finish of approved colour/ shade to bed hard with plywood top complete all as specified and as directed. (Drawing No.FD/E-6/MAP/08R)

Removing of existing unserviceable plywood top from GI pipe charpoy, tightening all check nuts, elbows, long rails, short rails and legs to hold the charpoy tight by welding the elbows and legs with two spots on each side and supply and fixing 12mm thick commercial plywood of grade BWR of size 6-1/2' to 7' x 3' (cut to suitable size to charpoy GI pipe) fixed with 06 Nos stainless steel nuts & bolts of 6 mm dia & suitable length complete all as specified and as directed. (Drawing No FD-220).

Removing of existing unserviceable nylon newar from Charpoy GI pipe nylon newar, tightening all check nuts, elbows, long rails, short rails and legs to hold the charpoy tight by welding the elbows and legs with two spots on each side and supply and fixing 12mm thick commercial plywood of grade BWR of size 6-1/2' to 7' x 3' (cut to suitable size to charpoy GI pipe) fixed with 06 Nos stainless steel nuts & bolts of 6 mm dia & suitable length complete all as specified and as directed. (Drawing No FD-220).

Supply and fixing of two middle support of flat iron 35mmx6mm thick equal shape to be welded on long rails as directed by Engineer-in-Charge. 8 Nos L type bracket made of angle iron 35mmx35mmx6mm, 35mm long should be welded on each short & long rail 150mm from corner including providing two coats of synthetic enamel paint over a coat of red oxide primer complete as direected for fixing of ply wood on each Charpoy GI pipe nylon newar.

Removing of old unserviceable elbow from charpoy GI pipe and Supply and fixing new 3 way GI elbow of 32 mm bore (ISI Marked) complete all as specified and directed by Engineer-in-Charge. (Drwaing No.FD-220)

Labour only for re-assembling of charpoy GI with nylon newar by replacing damaged parts of GI charpoy with serviceable parts as required by sorting out from unserviceable charpoy GI complete all as directed.

Material and labour for preparation of old painted steel surfaces including dent/ bends, welding of joint if required, scrapping and cleaning the surfaces and applying synthetic enamel paint with spray gun to a uniform finish of approved colour/ shade to chair verandah complete all as specified and as directed. (Drawing No.FD-256 and FD-359)

Material and labour for matt pattern recaning to seat and back of chair varandah steel with 4mm wide plastic cane of standard quality including scraping and cleaning the old existing painted steel surfaces and applying one coat of synthetic enamel paint to all steel surfaces and providing 04 Nos rubber shoes to each chair complete including removing old existing broken/ unserviceable plastic cane complete all as specified and as directed. (Drg No FD-256, FD-359)

S&F PVC seat and back made out of 4mm thick sheet of PPCP for chair varandah weight not less than 1.85 Kg (each chair) including scraping and cleaning the old existing painted steel surfaces and applying one coat of synthetic enamel paint to all steel surfaces and providing 04 Nos rubber shoes to each chair complete including removing old existing broken/ unserviceable plastic sheet all as specified and directed.(Drg No FD/MAP-II/06)

Removing existing unserviceable seat planks of farm with back and S & F new 25mm thick seat plank made out of well seasoned Hard Wood (Teak wood) of size 1800 x 255mm fixed to frame with GI nuts and bolts and polishing with French polish of wooden portion and all steel and iron surface shall be painted with two coats of enamelled synthetic paint over coat of primer all as specified and shown on drg. (FD-78 (M))

Removing existing unserviceable back rest planks of farm with back and S & F new 19 mm thick plank made out of well seasoned Hard Wood (Teak wood) of size 1800 x 150 mm fixed to frame with GI nuts and bolts and polishing with French polish of wooden portion and all steel and iron surface shall be painted with two coats of enamelled synthetic paint over coat of primer all as specified and shown on drg.(FD-78 (M))

Removing existing unserviccable seat planks of farm without back and S & F new 25 mm thick teak wood plank for seat made out of well seasoned Hard Wood (Teak wood) of size 1525 x 255mm fixed to frame with GI nuts and bolts and polishing with French polish of wooden portion and all steel and iron surface shall be painted with two coats of enamelled synthetic paint over coat of primer all as specified and shown on drg. (FD- 77 (M)/ 97)

Removing the existing unserviceable/damaged top of table dining OR and supply and fixing with new top made out of 18 mm thick block board, exterior grade, solid core, general purpose type and the top should be covered with Aluminium sheet 22 gauge complete all as specified and shown on drg. (FD-165(M))

Replacement of old unserviceable broken legs with new one made out of 25mm MS square pipe and welded to steel frame as required all as specified and shown on drg.(FD-165(M))

Replacement of unserviceable central stiffner with new one made out of 25mm MS square pipe and welded to steel frame all as specified and shown on drg.(FD-165(M))

M&L for preparation of old painted steel surface of table dining OR aluminium top and spray painting in two coats with first grade black synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.(FD-165(M))

Removing of existing old worn out/unservicable tapertry cloth from seat of chair revolving/executive and providing new tapestry cloth of best quality as approved over new polyurethane foam cushion 3” thick 32 density and long cloth fixing snape and all as shown on drg. (TP)

Removing existing old worn out/unservicable tapestry cloth from back of chair revolving/executive and providing new tapestry cloth of best quality as approved over new polyurethane foam cushion 2” thick 32 density and long cloth as directed by Engineer-in-Charge. (TP)

Removing old broken/worn casters wheels of chair revolving/executive and supply and fixing new casters same as existing & as directed by Engineer-in-Charge. (TP)

Removing existing broken arm handle of chair revolving/executive and supply and fixing new arm handle same as existing and as directed by Engineer-in-Charge. (TP)

Removing of old existing Unservicable seat frame of chair CBO steel without arms and S&F new seat frame of 2nd class hard wood fixed with 04 Nos machine screw 65mmX 3mm including canning with superior qulaity of plastic cane applying two coats of French polish in balck colour on wooden surfaces of chair CBO steel without arms complete all as specified and diected. (FD-75 (M))

All as per item No 46 here-in-before but chair CBO steel with arms. (FD-75 (M))

All as per item No 46 here-in-before but back frame of chair CBO steel without arms (FD-75 (M))

All as per item No 46 here-in-before but back frame of chair CBO steel with arms (FD-75 (M))

Removing of old existing unservicable arms of chair CBO steel with arms and S&F new arm rest of 2nd class hard wood fixed with suitable size of screw including two coats of French polish in black colour complete all as specified and directed. (FD-75 (M))

Removing of old existing unservicable flat iron runner and S&F new flat iron runner 25X3mm approximate 500mm long including making holes for fixing end other end welded to chair CBO steel without arm/with arms including two coats of synthetic enamel paint over a coat of red oxide primer on steel surface complete all as specified and directed. (FD-75 (M))

Removing of old U/S PVC caps & shoes and S&F new PVC caps & shoes of chair CBO steel without arms/with arms complete all as specified and directed. (FD-75 (M))

M&L for painting to all exposed surface of chair steel CBO without arms with one coat of synthetic enemel paint including preapartion of surface complete all as specified and directed. (FD-75 (M))

Description all as per item 53 above but chair CBO steel with arms above. (FD-75 (M))

Removing old unserviceable top of Teapoy Varandah (FD-383) made out of 18mm thick prelaminated particle board with one side teak finish and other side white exterior grade with 6mm thick first class hard wood edging complete duly polished, complete all as per drawing. (FD-383)

M&L for preparation of old painted steel surface of teapoy verandah and spray painting in two coats with first grade white synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.(FD-383)

(A)Removal of following existing unserviceable components as described below of various MAP furniture carefully without disturbing the adjecent parts and S&F new components in lieu of dismentled components including tightening the joints,pinning ,screwing, nailing, wedging,glueing, placing every things intact and welding, painting, polishing the disturbed portion, as applicable as per drg. Following directions will be followed for upholestry and polishing :- (i) Upholestry :- The cushion cover shall be of Make & Decore/Raymond furnishing/Vimal Exposed surface of wood work shall be furnished with melamine polish (Colour and pattern shall be approved by Engr-in-Charge). (ii) Polish :- Make of polish shall be melamyne by Ashin paint as equivalent in Nerolac/Berger (as approved by Engr-in-Charge). The same shall be carried out strictly as per the instructions given below:- (a) Cleaning of wooden surface by sanding it with sand paper 180 grit. (b) Clean the dust using a rug. (c) Stain the wood surface using wood touch water based stain. (d) Dry the surface in open air. (e) Mix Asian Paint woodtech Melamyne with hardener and thinner in the ratio 9:1:3 (Woodech Melamyne (90) : Hardner (10) : Thinner (30)

(g) Dry the surface in open air. (h) Apply two coats evenly. (j) Used sand paper on the surface of grit size 320 to 400. (k) Apply the coats till the reqd colour appears. (B ) NOTE : (i) The final colour of shall be approved by the Engr-in-charge. (ii) Works will be executed where the furniture exists in different User Units /Md Accn of GE(C) Pune including BSO's Furniture Yard as directed by Engineer-in-charge

CHAIR WRITING (Drg No : FD/E6/MAP-II/12)

(a) Seat cushion with tapestry cloth

(b) Back cushion with tapestry cloth

(c) Replacement of PVC beading

(d) Handle for arm rest

(e) Nut, bolt and washer

(f) Bush

CHAIR COMPUTER WITH ARMS (Drg No : FD/E6/MAP/01)

(a) Seat cushion with tapestry cloth

(b) Back cushion with tapestry cloth

(c) Replacement of PVC beading

(d) Handle for arm rest

(e) Nut, bolt and washer

(f) Revolving Hydrolic frame complete

TABLE COMPUTER (Drg No : FD/E6/MAP/03)

(a) Table top 18mm MDF board

(b) Side 18mm MDF board

(c) Drawer

(d) Key board tray

(e) Sliding channel

(f) Caster wheel

(g) Knob

STEEL RACK BOOK SHELVE OPEN/CLOSE TYPE OFF SORTS

(a) Removing U/S shelves of rack steel and S&F new shelves of PBI sheet size 3’X1.5’ made out of 20 gauage PBI including fixing complete by means of bolting/welding or riveting etc including two coats of synthetic enamel paint over a coat of red oxide primer all as specified and direced by Engr-in-Charge as shown on drawing

(b) Description as in item 61.01 above but shelves size 3’X1.3”

(c) Description as in item 61.01 above but shelves size 3.5 to 4/0X1.5’

(d) Dismanting /taking down old U/S leg of rack steel and S&F new leg of MS slotted holes steel angle iron 40X40X4 mm and fixed complete by means of bolting/welding or rivting etc including two coats of synthetic enemel paint over a coat of red oxide primer including preparation of new steel surface all as specified and directed by Engr-in-Charge

(e) S&F mild steel corner made out from M.S sheet 3mm thick size 75X75mm in triangular shape fixed complete by means of welding/bolting or riveting as per site requirement including two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed

(f) Removing old paint by buringoff by blow lamps and cleaning with scrapers any number of coats any width or girth including the surface-by washing down M&L two coats of synthetic enamel paint over a coat of red oxide primer including preparation of surface including removal of all dents filling with putty including taking out old nut bolts complete all as specified and directed by Engr-In-Charge (Rack steel open type)

Mahesh Traders