SPECIAL REPAIRS TO BLDG NO T2 AT HQ DB AREA AND PROVN OF AREA DRAINAGE AT PGEP AND TRAINING AREA AT ISLAND GROUND UNDER GE CHENNAI

Amount

BOQ UPLOADED ON 17 NOV 2021

Excavation in trenches in soft/ loose soil n. exc. 1.50m wide and n. exc. 1.50m deep for foundation, or for shafts, wells, cesspits, manholes, laying cable etc. n. exc. 10 sqm on plan and getting out complete all as specified and directed.

Removing excavated soil to a distance n. exc. 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L sand filling under floors or in foundation including watering, well ramming & consolidating in layers not exceeding 25cm thick complete all as specified and directed.

M&L for providing PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling, sub base of floors and mass concrete complete all as specified and directed.

M&L for providing PCC (1:3:6) type C-2 using 40mm graded stone aggregate as in foundation filling, sub base of floors and mass concrete complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 using 20mm graded stone aggregate as in coping, kerbs, channels, water troughs and the like including weathering, slightly rounded or chamfered angles and throating etc. complete all as specified and directed.

Extra for forming fair finishing to drain or channels 30cm inner girth in cement concrete using extra cement including forms, moulds stopped ends etc., complete all as specified and directed.

Add or deduct for each 25mm girth or part thereof over 30cm inner girth.

M&L for RCC (1:1½:3) type A-1 using 20mm graded stone aggregate as in precast cover slab with plain faces for manholes set in cement mortar (1:4) including necessary form work complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan exc. 6m mean radius built in cement mortar (1:6) complete all as specified and directed.

M&L for brickwork with old size fly ash bricks straight or curved on plan to any radius in half brick thick walls in cement mortar (1:4) complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area n. exc. 1.5 sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down chowkats (or) frames of any description with shutters (without taking off shutters from the frame) of area exc. 1.5 sqm but not exc. 4sqm each including separating guard bars/ grills/ wire mesh etc. complete all as specified and directed.

Taking down shutters of any description n. exc. 1 sqm each including all fittings complete all as specified and as directed.

Taking down shutters of any description exc. 1 sqm but n. exc. 2 sqm each including all fittings complete all as specified and as directed.

Taking down shutters of any description n. exc. 1 Sqm each and re-securing in the same opening after cutting, easening etc. with new iron mongry complete all as specified and as directed.

Taking down shutters of any description exc. 1 Sqm but n. exc. 2 Sqm each and re-securing in the same opening after cutting, easening etc. with new iron mongry complete all as specified and as directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube all as per relevant details given in SSR against item No. 08095 of SSR Part-II and fitted to chowkats complete all as specified and directed.

S&F factory made wood free EPS solid PVC moulded door shutter 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet Polyurethane painted on the front face and 2mm moulded prelam PVC sheet on back face fixed to frame complete all as specified, directed and shown in sketch relevant to item No. 8103 in SSR (Part-II).

S&F aluminium powder coated designer curtain rods (draw berms rods) 19mm dia exterior grade, 3mm thick with holding clamps and fixed to wall with PVC rawl plug and brass screws and one pair designer end brackets on each opening including taking down the existing curtain rod of any description complete all as specified and directed.

S&F hasp and staple 100mm size, aluminium anodised safety type with mild steel hinge pin including bolt to hinge plate fixed with screws complete all as specified and directed.

S&F stainless steel cabinet hinge/ self-closing hinge/ auto hinge complete all as specified and directed.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wooden frames/Aluminium shutters complete all as specified.

S&F aluminium alloy wire cloth 0.45mm nominal dia of wire and average width of aperture 1.4mm fixed with aluminium wire staples fixed to wooden frames fixed in repairs complete all as specified.

M&L for 10mm dia and over mild steel TMT bars as in reinforcement cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe-500D complete all as specified and directed.

S&F framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks & similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

S&F rolled mild steel roof trusses (framed), trussed purlins, crane gantries, rails & fastenings & heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc. Gde Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F Pre-painted galvalume aluminium zink coating GI based corrugated or semi corrugated steel sheet 0.5mm thick of any colour having tensile strength 550Mpa as in roof covering fixed with self tapping screws as per manufacturer’s instruction complete all as specified and directed.

M&L for galvanised powder coated snap grid framework for false ceiling all as specified including Vinyl laminated MPL gypsum panels (GYPTECH) 9mm thick of size of 60cm x 60cm fixing with staples on snap grid on RCC slabs by means of GI wire not less than 4mm dia, hooks and rawl plugs etc. at 1200mm c/c of make GYPTECH/ ARMSTRONG OR equivalent complete all as specified and directed.

S&F anodized powder coated aluminium (minimum thickness of powder coating 50 micron) frames for doors/ windows/ ventilators/ partitions with one or more rebates including joining cleats for fixing complete all as specified and directed.

S&F anodized aluminium powder coated (minimum thickness of powder coating 50 micron) paneled door shutter of aluminium section for frame work not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, 2 No. 150mm long handles, 02 No. 200mm long tower bolts, 03 No. SS hinges and 01 No. aluminium mortice lock in each door, fully glazed for providing glass panes, prelaminated particle boards etc. including anodised aluminium snap beads, screws etc. complete all as specified and directed. Note: Glass panes and prelaminated particle board shall be measured and paid for separately under appropriate item of this BOQ.

S&F aluminium powder coated (minimum thickness of powder coating 50 micron) windows and ventilator shutters, side hung type with sash bars, aluminium section weighing not less than 0.55 Kg/ RM including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading screws, anodised aluminium fittings such as peg stay 150mm long (01 No.), 100mm long SS (02 No.), handle 01 No in each shutter complete all as specified and directed. Note: Glass panes and wire mesh shall be measured and paid for separately under appropriate item of this BOQ.

S&F aluminium powder coated window security grills with frame 6mm thick 50mm x 50mm aperture fixed with joining cleats etc. complete all as specified and directed.

M&L prelaminated particle board 18/ 19mm thick, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination as in shelves fixed to aluminium frame work complete all as specified and directed.

S&F pre-laminated particle board 9mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with snap beads/ screws as in panel inserts in aluminium frame work complete all as specified and directed.

S&F pre-laminated particle board 12mm thick, interior grade pre-laminated on one side with decorative choice lamination and other side balancing white lamination fixed with snap beads/ screws as in panel inserts in aluminium frame work complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store & rubbish off the premises complete all as specified.

M&L nonskid coloured ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tiles exc. 0.06 Sqm but n. exc. 0.11 Sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L for joint free non skid coloured ceramic tiles 7mm to 8mm thick (Square/ rectangular) area of each tile exc. 0.11 sqm but n. exc. 0.18 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement mortar (1:4) complete all as specified and directed.

M&L glazed coloured ceramic tiles of size 300mm x 600mm x 7mm thick laid on vertical surfaces set and jointed in neat cement slurry and pointed in coloured cement to match the tile laid over and including 10mm thick backing coat in cement mortar (1:3) complete all as specified and as directed.

M&L for vitrified light shade coloured ceramic tiles 8 to 10mm thick (Square/ Rectangle) area of each tiles n. exc. 0.36 sqm each as in floors etc.; set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer in cement mortar (1:6) complete all as specified and directed.

All as per item No. 41 above but on vertical surfaces such as skirting, dados and risers as in steps etc. laid over and including 10mm thick rendering in cement mortar (1:3) complete.

M&L for chequered coloured (Designer) cement concrete tiles 40cm x 40cm x 25mm thick set, jointed and pointed in neat cement slurry as in floors with grey cement and no pigment laid over and including 20mm thick screed bed in cement mortar (1:4) including dismantling of existing tiles complete all as specified and directed.

M&L for machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 60mm thickness M-35 grade with grey cement and no pigments laid as per manufacturer's instructions including dismantling of existing tiles complete all as specified and directed.

M&L 75mm thick PCC (1:3:6) type C-2 using 40mm stone graded aggregate as in plinth protection including filling of joints by bitumen and sand in ratio (1:2) complete all as specified and directed.

M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite stone including cutting & polishing laid over and including 20mm thick screed in cement mortar (1:6) complete all as specified and directed.

M&L for rounding to edges of stone slabs, such as in steps, cooking platform and other similar situations all as specified and directed.

Taking down cement plaster on brick work or stone walls etc including racking out of joint, hacking for key, scrubbing down with water etc. and removing the debris outside MD land complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces finished the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L rendering 15mm thick in two coats i.e. 1st coat 10mm thick in cement mortar (1:6) and 5mm thick finishing coat in cement mortar (1:4) mixed with and including PIDI PROOF LW compound @ 200ml per bag and finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5mm thick in cement mortar (1:3) on ceiling finishing the surface even and smooth without using extra cement complete all as specified and directed.

M&L for chipping of loose concrete, carefully broken plastering in Chajjas, ceiling, fins, facias and bottom of projected slabs and applying one coat of rust remover using DR FIXIT rust remover and applying one coat of DR FIXING PIDICRETE concrete MPB bonding agent and Rendering 20mm thick in cement mortar (1:4) in two coats of 10mm each as in repairs of chajjas, ceiling, fins, etc. including application of three coats of white wash after preparation of surface upto a height of 10m from ground level complete all as specified and as directed.

M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of weather proof exterior acrylic emulsion paint (Apex Ultima of Asian or equivalent of other specified makes) complete all as specified and directed.

M&L for complete removal of existing treatment with electric operated blade, washing with water and bleaching powder solution on external surface of walls and applying two coats of Weather Proof Exterior Acrylic Emulsion paint (Apex of Asian or equivalent of other specified makes) over a coat of white primer complete all as specified and directed.

M&L for preparation of newly plastered surface of ceiling and applying two coats of oil bound distemper over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of newly plastered surface of walls and applying two coats of plastic emulsion paint over and including a coat of white primer and 2 to 3mm thick wall care putty complete all as specified and directed.

M&L for preparation of old plastered surface of walls and applying two coats of plastic emulsion paint over and including a coat of white primer and 2 to 3mm thick wall care putty complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/ wooden beads as directed in squares n. exc. 0.50 Sqm in each pane complete all as specified and directed.

S&F sheet glass 4mm thick plain ordinary quality and glazing with oil putty/ wooden beads as directed in squares n. exc. 0.50 Sqm in each pane including hacking out old brocken glass panes complete all as specified and directed.

M&L preparation of new steel surfaces of any description not otherwise described over 10cm girth or width and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F galvanised steel water tubing 15mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc. including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 20mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc. including taking up or down the existing GI tubing complete all as specified and directed.

S&F galvanised steel water tubing 25mm bore medium grade including provision of all pipe fittings such as bends, tees, elbows, reducers, unions, plugs, sockets etc. fixed to walls, concealed in walls/ ceilings or laid in floors etc. including taking up or down the existing GI tubing complete all as specified and directed.

M&L for PVC (SWR) pipes of 110mm dia., single socketed in any length with rubber joints, laid in floor/ trenches and set in solvent including taking up/ down old pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall and set in solvent including taking up/ down old pipe complete all as specified and directed.

S&F 110mm dia PVC (SWR) bend any radius with access door all as specified and directed.

S&F PVC (SWR) vent cowl suitable for 110mm bore vent pipe complete all as specified and directed.

S&F PVC (SWR) branch piece double (double 'Y') equal or unequal 110mm bore with access door complete all as specified and directed.

S&F PVC (SWR) junction double (double 'T') equal or unequal 110mm bore with access door complete all as specified and directed.

M&L for PVC (SWR) floor trap 75mm dia plain with grating including jointing with solvent cement fixed in repairs complete all as specified and directed.

Supply, hoisting and fixing in position of 1000 litre capacity three layered rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) including dismantling the existing overhead tank complete all as specified and directed.

S&F PTMT ball valve with epoxy coated aluminium rod for 25mm bore pipe high pressure with polyethylene high density float and screwed for iron pipe fixed in repair complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 20mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F gun metal, globe or gate valve confirming to IS 778-1984 with iron wheel head, screwed both ends for 25mm bore iron pipe and fixed in repairs complete all as specified and directed.

S&F in repair PTMT grating 100mm dia as per cat No. 111 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F 15mm PVC connection 600mm long with brass nuts fixed in repairs complete all as specified and directed.

S&F in repairs CP bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipes and wall flange as per Cat No. ALD-769L300 x 190 of Jaquar or Cat No. BEA-26 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated angle cock with flange, screwed down, high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union as per Cat No. CON-053KN of Jaquar or Cat No. 8310 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia pillar tap, cast copper alloy with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipes as per Cat No. CON-021 of Jaquar or Cat No. 8304 of Prayag complete all as specified and directed.

S&F in repair 900mm x 950mm bevelled edged looking mirror 6mm thick with designed wooden frame work alround fitted with 6mm thick commercial ply or AC sheet backing to mirror complete all as specified and directed.

S&F in repairs towel ring round with round flange as per Cat No. 1121BN of Jaquar or Cat No. BA-11 of Prayag complete all as specified and directed.

S&F in repairs health faucet (hand shower) with 1.2metre long flexible tube with wall hook, chromium plated as per Cat No. ALD-563 of Jaquar or Cat No. BEA-85 of Prayag complete all as specified and directed.

S&F toilet paper holder with flap recessed type matt chromium plated as per Cat No. 1153S of Jaquar or Cat No. BA-88 of Prayag complete all as specified and directed.

S&F in repairs soap dish, matt finished chromium plated (MCH/ Colour CP) as per Cat No. 1131N of Jaquar or Cat No. BA-25G of Prayag complete all as specified and directed.

S&F in repairs corner glass shelf 300mm (with ABS brackets) matt finished chromium plated (MCH/ colour CP) with bracket end fittings as per Cat No. ACN-1173 of Jaquar or Cat No. BEA-46 of Prayag complete all as specified and directed.

S&F in repairs CP waste coupling heavy (full thread) of size 32mm as per Cat No. BEA-11 of Prayag or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F in repairs towel rail 600mm long between flanges, brass chromium plated fixed with brass screws as per Cat No. 1111NM of Jaquar or Cat No. BA-40 of Prayag complete all as specified and directed.

S&F in repairs 15mm dia brass chromium plated two way angle stop cock with flange, screwed down, high pressure with crutch or butterfly handle, fancy type with long shank screwed both ends for iron pipe or for union as per Cat No. 1121BN of Jaquar or Cat No. 8311 of Prayag complete all as specified and directed.

S&F in repairs vitreous china wash basin of size 600mm x 450mm of Make Parryware Cube model Cat No-C844E or equivalent from other makes specified in particular specifications including 19mm thick granite top with supporting wall, waste coupling, waste pipe and brackets etc. complete all as specified and directed.

S&F in repair PVC cabinet mirror of size 330mm x 430mm with shelf as per Cat No. 551 of Parryware or equivalent from other makes specified in particular specifications complete all as specified and directed.

S&F 15mm dia bib taps cast copper alloy, fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or for brass ferrule and fixed in repairs complete all as specified and directed. Make: Jaquar Cat No. QQT-CHR-7037 or equivalent from Prayag.

Demolition of brick masonry built in cement mortar including all quoins, arches, pillars, ashlars facings, dressed stone work and pre cast concrete articles etc., complete all as specified and as directed.

Demolition of cement concrete in ground floor and paving not exceeding 15cm thick below or above GL including removal of debris to outside MD land complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi-corrugated, etc.)/ CGI/ PGI/ Galvalume sheets in roof coverings all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc. including removal of debris to outside MD land complete all as specified and directed.

Dismantling wall and ceiling boards (fiber, pulp, insulation etc. or insulation boards/ slabs, blankets; of any thickness including cover fillets complete all as specified and directed.

Dismantling structural steel work of any description not otherwise specified all as specified and directed.

Taking down old unserviceable/ damaged point wiring carefully of any size and description on teak wood batten/ through pipe (light, fan, socket etc) including removal of battens, pipes/ conduits, sockets, switches, shades, ceiling fittings, bulk head fittings ceiling rose etc complete and making good disturbed portion of wall to match with the existing surface all as specified and directed.

M&L for point wiring complete with 1.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/roof etc. including new pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provn of 1.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly etc., complete all as specified and directed for:-

One light point controlled by one switch.

One Fan/ Exhaust fan point controlled by one switch.

One 3 pin 5 amps socket outlet on the same board with other switches controlled by one switch.

One 3 pin switch socket outlet, 5 Amps on independent board controlled by one switch.

Bell/ buzzer point controlled by one bell push.

One light point controlled by two No. 2 way switches

M&L for point wiring complete with 2.5sqmm (nominal area) PVC insulated unsheathed multi-stranded, (two run for Phase and Neutral) copper conductor FR & LS grade cable of 1100 V grade conforming to IS -694 drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20mm bore with conduit accessories concealed In wall/ floor and fixed on ceiling/ roof etc. including pressed steel terminal boxes 1.6mm thick, concealed in walls with plastic laminated sheet cover 3mm thick as top cover fixed with cadmium plated screws for housing the switch sockets, outlets, fan regulator etc. including provision of 2.5sqmm PVC insulated unsheathed copper conductor cable of green colour for earth continuity and connecting to common earth dolly complete all as specified for one socket outlet (plug point) three pin 15 Amps controlled by one switch 15 Amps on independent board complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

Supply and fix switch piano, flush type, single pole, two way, 5 Amps, 230 volts all as specified and directed.

Supply and fix switch socket combination, 2 in 1, 5 Amps, 230 volts flush type all as specified and directed.

S&F switch socket combination flush type, 3 pin 15 Amps and 3 pin 5 Amps, 230 volts, 5 in 1, multipurpose, universal type complete all as specified and directed.

S&F ceiling rose PVC/ polycarbonate body 65 x 50mm 2 to 3 terminals 230 Volts, AC Single phase all as specified and directed.

Supply and fix call bell/ buzzer multi tune, 230 volts AC all as specified and directed.

Supply and fix bell bush, flush type, single pole, one way, 5 Amps, 230 volts all as specified and directed.

Supply and fix lamp holder insulated body with back plate for batten fittings/ angle holder as required complete all as specified and directed.

S&F electronic ceiling fan regulator, flush type, 300 watts all as specified and directed.

Supply, fix, connecting and testing MCB single pole (MCB SP), 6 to 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing MCB SPN, 32 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 4 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatized, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, SPN, 8 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatized, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing factory made, MCB distribution board (MCB DB), IP 38, TPN, 4 way, 240 Volts, double door, flush type made out of 1.2mm thick CRCA sheet metal, Phosphatized, duly powder coated and conforming to IS 13032 with 200 Amps rated bus bar, neutral link, earth bar and din rail etc. complete fixed in switch board/ wall including taking down the existing one complete all as specified and directed. Note: MCBs shall be measured and paid separately.

Supply, fix, connecting and testing MCB SPN, 40 Amps, 240 volts of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

S&F batten type luminaries with CRCA body, pre-coated in white and pre-wired for single LED tube light of capacity 22 Watts including LED tube with and including flexible twin core copper conductor 23/0.0076mm from ceiling rose to connector of tube light fitting including taking down old unserviceable fluorescent tube light fittings complete all as specified and directed. Make: Havells Cat Part No. LUMILINEPLUSBS22WLED865SPCSS or equivalent of other specified makes.

S&F batten type luminaries with CRCA body, pre-coated in white and pre-wired for single LED tube light of capacity 10 Watts including LED tube with and including flexible twin core copper conductor 23/0.0076mm from ceiling rose to connector of tube light fitting including taking down old unserviceable fluorescent tube light fittings complete all as specified and directed. Make: Havells Cat Part No. LUMILINEPLUSBS10WLED865SPCSS or equivalent of other specified makes.

Supply and fix 10 watt environmental friendly, ultra modern, energy saving, surface mounted, decorative hexagon bulk head back-lit LED luminaire comprising of high brightness LEDs including taking down old light complete all as specified and directed. Make: Havells Cat No. HEXAFT10WLED857SSYMBOPC or equivalent from other makes specified in Particular specifications.

S&F 42 watts environment friendly, new generation, aesthetically, ultra modern designed recess mounting luminaire with high brightness SMD LEDs as light source suitable for Armstrong/ Grid ceiling fixed to ceiling including taking down old fitting complete all as specified and directed. Make: Havells Cat No. PLUTONEO2X2PLR42WLED840S or equivalent from other makes specified in Particular Specifications.

S&F 25 watt spun aluminium post top clear light fitting with high power LEDs as light source with IP65 protection including taking down old fitting complete all as specified and directed. Make: Havells Cat No. RUBYPT25WLED757PSYMTOPC or equivalent from other makes specified in Particular Specifications.

S&F environmental friendly, long life aesthetically designed aluminium landscape luminaire for diffused lighting with high power LED as light source including taking down the old fitting complete all as specified and directed. Make: Havells Cat No. BAMBOOBL8WLED857PSYMTOPCM (1.0m) or equivalent of other specified makes.

S&F 10 watts LED recess mounted down lighter with pressure die-cast aluminium heat sink and polycarbonate diffuser in white powder coated finish with integrated driver complete with all accessories including connection with flexible twin core copper conductor of size 23/0.0076mm all as per Cat No. INTEGRANEODLR10WLED840S of Havells or equivalent of other specified makes fixed on ceiling including taking down the old fitting complete all as specified and directed.

Supply, fix, connecting and testing MCB TPN, 63 Amps, 415 V of rupturing capacity 10kA, C curve type including taking down the existing one complete all as specified and directed.

S&F 40 watts environment friendly, new generation, LED building security light made up of pressure die cast aluminium housing with high efficient LED as lighting source and PC cover having top opening separate driver compartment with IP66 protection and impact resistance of IK07 including provision of two single core 2.5 sqmm copper conductor PVC insulated cable complete all as specified and directed. Make: Havells cat No. ENDURAPEARLNEOSL40WLED757PASYTOPC or equivalent from other makes specified in Particular Specifications.

M&L for submain wiring complete with two runs of 6.0 Sqmm single core, multi-stranded, FR PVC insulated unsheathed cable 1100 volts grade with copper conductor, drawn through and including new rigid non metallic PVC conduit medium grade ISI marked 25mm external dia concealed in wall/ floor along with conduit fittings and accessories, fixed on ceiling with one run of 6.0 Sqmm PVC insulated unsheathed copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified. Note: Two runs of 6.0sqmm multi-stranded cable and one run of 6.0sqmm cable as earth continuity conductor alongwith PVC conduit shall be considered as one unit length.

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6.3mm thick burried directly in ground vertically to a depth not less than 2.25m deep below ground level with top edge of plate not less than 1.5 below ground level connected to GI 4mm earth wire by means of bolts, nuts check nuts washers made of galvanised iron or steel earth wire protected by GI pipe 15mm bore light grade connected upto switch board including 20mm bore GI water pipe with funnel and wire mesh all as shown in electrical plate No. 3 of MES Schedule Part-I including dearth chamber of PCC (1:2:4) type B-1 using 20mm grade aggregate with 40mm thick RCC cover slab (1:1½:3) type A-0 using 12.5mm graded stone aggregate reinforced with 8mm dia TMT bars @ 100mm c/c both ways and 6mm dia MS lifting hooks including testing on completion including dismantling existing earthing complete all as specified and as directed.

G.L.THIRUMALAI NAIDU AND COMPANY

power links

DJ Group

M/s.Sai Agency